Dryglam 2in1 Sensor Champagne - Computer monitor CECOTEC - Free user manual and instructions

Product type	Professional 2-in-1 hair dryer
Brand	Cecotec
Model	Dryglam 2in1 Sensor Champagne
Color	Champagne
Power	2000 W
Number of speeds	2 speeds + turbo
Temperatures	3 levels + cool air
Technology	Ionic Sensor for shiny hair
Included accessories	Concentrator nozzle, diffuser, straightening comb
Cable length	2.5 meters
Weight	0.6 kg
Dimensions	25 x 10 x 7 cm
Power supply	220-240 V, 50/60 Hz
Main functions	Drying, straightening, volume, diffusion
Maintenance and cleaning	Regularly clean the air intake grille with a soft brush
Safety	Overheat protection, automatic shut-off
Spare parts and repairability	Removable filter, cable replaceable by after-sales service
General information	For household use only. Do not immerse in water.

Frequently Asked Questions - Dryglam 2in1 Sensor Champagne CECOTEC

How to use the ionic sensor?

The ionic sensor activates automatically during drying. It emits negative ions to reduce frizz and make hair shinier.

How to maintain the filter?

Remove the rear filter and clean it with a soft brush every month to avoid overheating.

Can I use the device in the bathroom?

Yes, but only away from water. Never immerse in water. Use with caution.

How to change the temperature?

Use the temperature button to switch between the 3 levels: low, medium, high. The cool air button helps set the hairstyle.

What to do if the device does not turn on?

Check the electrical outlet and the fuse. If the problem persists, contact customer service.

What is the average drying time?

With 2000W power, medium-length hair dries in 5 to 10 minutes depending on speed and temperature.

How to use the diffuser?

Attach the diffuser to the nozzle, select a low speed and temperature for gentle drying that adds volume.

Does the device have a warranty?

Yes, Cecotec offers a 2-year warranty. Keep your receipt.

Can I use the device on wet hair?

Yes, it is designed to dry damp hair. Do not use on dry hair for extended periods to avoid damage.

How to attach the straightening comb?

Clip the straightening comb onto the nozzle. Use it with a brush to straighten hair while drying.

USER MANUAL Dryglam 2in1 Sensor Champagne CECOTEC

1. Parts and components

2. Before use

3. Operation

4. Cleaning and maintenance

5. Troubleshooting

6. Disposal of old electrical and electronic

appliances

1. Copyright

2. Simplified EU Declaration of Conformity

SOMMAIRE

EN • The coding in this manual is generic and applies to all code variants of the appliance.

• Read the following instructions carefully before using the appliance. Keep this instruction manual for future reference or new users.
• Make sure that the mains voltage matches the voltage specified on the product's rating label and that the plug is earthed.
• This appliance is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels,

and offices.

If the appliance is to be used in a bathroom, it must be unplugged from the wall socket after use, as the proximity to water could be a risk even with the appliance switched off.
As additional protection, it is recommended that a Residual Current Device (RCD) having a rated operating fault current not exceeding 30 mA be installed in the electrical circuit supplying the bathroom. We recommend you ask a qualified installer for advice.

- This appliance can be used by children aged from 8 years and above and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by unsupervised children.

This symbol means: Do not use this appliance in a bathtub, shower or nearer.

• WARNING: do not use this appliance near bathtubs, showers, sinks or other containers filled with water.
• Do not immerse the cord, plug, or any other non-removable part of the appliance in water or any other liquid or expose electrical connections to water. Make sure

your hands are dry before handling the plug or switching on the appliance.
- Check the power cord regularly for visible damage. If the cord is damaged, it must be replaced by Cecotec's Official Technical Support Service to avoid any danger.
- Ensure that the air inlets and outlets are not blocked.
- Turn off and unplug the appliance from the power supply immediately after use.
. Unplug the appliance immediately under

the following circumstances: abnormal operation, needs cleaning, and/or after use.

• Do not insert metal objects through the air inlets to avoid electric shocks.
• Do not wind the power cord around the appliance.
• Keep your face, neck, and scalp away from the appliance.
• Do not leave the appliance on any surface while in operation.
• Do not use the appliance to dry wigs, natural

hair extensions, fake hair or animal hair.

• The air inlet ensures good ventilation of the appliance. Do not cover or obstruct it, as this may cause overheating.
• Do not insert objects in the air inlet.

INSTRUCTIONS DE SÉCURITÉ

1. LED indicator light

2. Blue: Cool air

3. Yellow: Warm air
4. Red Hot air
5. Blue and red: alternating cold and warm air

6. White: smart control

7. Power/airflow speed control switch

8. Mode button
9. Air inlet grille
10. Power cable
11. Concentrator nozzle

7.Diffuser

1. Temperature sensor LED indicator

2. Red: high temperature

3. Orange: medium temperature
4. Green: low temperature

Note:

The graphics in this manual are schematic representations and may not exactly match the product.

2. BEFORE USE

• This appliance comes in a packaging designed to protect it during transport. Remove the appliance from its box. You can keep the original box and other packaging materials in a safe place to prevent damage to the appliance if you need to transport it in the future. If you wish to dispose of the original packaging, make sure all items are recycled properly.
• Check that all parts and components are included and in good condition. If any of them are missing or damaged, please contact Cecotec's Official Technical Support Service immediately.

Box content:

- Product

• Concentrator nozzle
• Diffuser
• Instruction manual
• Do not remove the product's serial number in order to keep proper traceability if technical assistance is required.

3. OPERATION

Standby mode

- Plug the power cable (5) into a power socket. All indicators remain off; the device is in standby mode.

Switch-on and speed selection

- Slide the power/airflow speed control switch (2) to change the speed:

0: standby mode.

I: low speed.

II: high speed.

Mode button

• Press the mode button (3) repeatedly to switch between: Cool air (blue)→ Warm air (yellow) → Hot air (red) → Cool + hot air circulation mode (blue and red at the same time) → Smart control mode (white).
• In any of the above modes (except for cool air), press and hold the mode button (3) to switch to cool air mode. When the mode button (3) is released, the hair dryer returns to the previous mode.

lon generator

- Negative ions operate in all modes.

Temperature sensor

• The temperature sensor only operates when the smart control mode is activated.
• The LED indicator (8) changes colour depending on the detected temperature: red indicates high temperature and orange indicates suitable temperature.

Triple protection system:

• Temperature control through NTC probe, with readings up to 100 times per second.
• Self-resetting mechanical thermostat.

- Non-self-resetting thermal safety device to prevent overheating.

How to attach accessories

• The hair dryer can be used with the concentrator (6) or with the diffuser (7). They allow 360° rotation to work on one section of hair without affecting the rest.
• To attach an accessory, bring the concentrator (6) or diffuser (7) close to the front end of the device and gently push it in until it locks in place.
• To prevent hair from being sucked into the air inlet grille (4) and causing pulling, hair loss or burns, always maintain a distance of more than 10 cm between the air inlet grille (4) and your hair during use.

4. CLEANING AND MAINTENANCE

- Before cleaning, unplug the cable (5) from the mains and allow the device to cool down completely.

Filter maintenance

• Clean the filter periodically to prevent blockages and ensure that air enters correctly through the air inlet grille (4).
• Do not clean the interior stainless steel filter with water. The use of water may cause the hair dryer to malfunction.
• The air inlet grille (4) is attached to the device using a magnetic coupling. Hold the device and pull the air inlet grille (4) downwards to release it, then remove it from the device. Fig. 2
• To remove dust or other particles from the surface of the air inlet

grille (4) and stainless steel filter, use a dry, lint-free cloth, a soft brush, or a clean, dry toothbrush. Fig. 3

- After cleaning, replace the air inlet grille (4) in its position until you hear a click, indicating that it has been correctly fitted. Fig. 4

5. TROUBLESHOOTING

Problem	Possible causes	Solutions
The appliance does not work	Damage to the control board (PCB)	Contact Cecotec's Official Technical Support Service.
	Poor connection to the mains supply	1) Verify that the cable plug (5) is firmly connected and then restart the unit.2) Check that the voltage is stable.3) If the problem persists, please contact Cecotec's official Technical Support Service.
The LED indicator (1) flashes white	The power supply is anomalous	Contact Cecotec's Official Technical Support Service.

The LED indicator (1) flashes red	Heating element malfunction	1) Check whether the air inlet grille (4) or the air outlet is obstructed; after checking, restart the device when it is cold.2) If the problem persists, please contact Cecotec's official Technical Support Service.
The LED indicator (1) flashes orange	Motor malfunction
The LED indicator (1) does not light up	Damage to the control board (PCB)	Contact Cecotec's Official Technical Support Service.
The LED indicator (1) is displayed abnormally
The control button does not work properly
Cable/plug overheating	Power cable damage
Burning smell during use	Damage to internal components

6. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or battery must be disposed of separately from household waste. When this product

reaches the end of its shelf life, you should dispose of the

batteries/accumulators and take them to a collection point designated by the local authorities.

For detailed information on how to properly dispose of electrical and electronic equipment and/or the corresponding batteries, consumers should contact their local authorities.

Information regarding national packaging recycling systems and their marking can be found on our website.

Compliance with the above guidelines will help protect the environment.

7. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The content of this publication may not, either in part or in its entirety, be reproduced, stored in a retrieval system, transmitted or distributed by any means (electronic, mechanical, photocopying, recording or similar) without prior authorisation from CECOTEC INNOVACIONES, S.L.

8. SIMPLIFIED EU DECLARATION OF CONFORMITY

Cecotec Innovaciones hereby declares that this appliance

complies with the essential requirements and other relevant provisions of the regulations applicable in the European Union. This appliance has been designed, manufactured and tested in

compliance with required safety and quality standards. The full text of the EU Declaration of Conformity can be found on the following website:https://cecotec.es/es/information/declaration-of-conformity

1. PIÈCES ET COMPOSANTS

Image 1

Fig./Img./Abb./Afb./Rys./Obr./Şekil/Eik./ábra/2
Fig./Img./Abb./Afb./Rys./Obr./Şekil/Eik./ábra/3

Fig./Img./Abb./Afb./Rys./Obr./Şekil/Eik./ábra/4

DRYGLAM 2IN1 SENSOR CHAMPAGNE/BLACK

www.cecotec.es