Precisioncare Proclipper Titanium - Computer monitor CECOTEC - Free user manual and instructions

Product type	Professional hair clipper
Brand	Cecotec
Model	Precisioncare Proclipper Titanium
Power supply	100-240 V ~ 50/60 Hz (mains)
Blade type	Titanium blades, adjustable and replaceable
Cut adjustment	Blade lever + guide combs (1.5 mm to 25 mm)
Included accessories	10 guide combs (1.5 / 3 / 4.5 / 6 / 9 / 12 / 16 / 19 / 22 / 25 mm) + 2 ear combs, oil, brush, travel bag
Use	Domestic, natural hair cutting only
Maintenance	Oil blades regularly, clean with brush, do not immerse
Safety	Do not use on damaged scalp, do not expose to water, stop and unplug before cleaning
Warranty	2 years, covers manufacturing defects, Cecotec customer service
Repairability	Replaceable blades and combs, do not open the casing
Country of manufacture	China (designed in Spain)

Frequently Asked Questions - Precisioncare Proclipper Titanium CECOTEC

How to adjust cutting length on the Cecotec Precisioncare Proclipper Titanium?

Use the blade lever on the side: raise it for a shorter cut, lower it for a longer cut. You can also attach a guide comb of the desired size (from 1.5 mm to 25 mm) by snapping it onto the blades.

Can I use this clipper on a damaged or irritated scalp?

No, it is not recommended to use the device on a scalp with lesions, irritations, or diseases. Wait for complete healing before use.

How to clean and maintain the clipper blades?

Unplug the device, remove the blades if necessary, clean them with the provided brush to remove hair. Apply a few drops of oil to the blades after each use to ensure proper operation.

What to do if the blades no longer cut effectively?

First check that the blades are well oiled. If the problem persists, adjust the blade fixing screws by turning them clockwise until you hear a noise, then counterclockwise until the noise stops. If that does not work, replace the blades.

Is the Cecotec Precisioncare Proclipper Titanium corded or cordless?

It is corded. It operates on mains power with 100-240 V. Plug it directly into an electrical outlet.

Can I use the clipper to cut pet hair?

No, the device is designed exclusively for cutting natural human hair. Do not use it on animals or artificial hair.

How to replace the clipper blades?

Turn off and unplug the device. Unscrew the two screws of the blade assembly, remove the old blades. Place the new blades aligning the teeth (the first upper tooth must cover the first lower tooth) and screw back. Ensure the distance between blades is between 0.8 and 1.5 mm.

What to do if the clipper makes an abnormal noise?

A slight 'click' when starting is normal. If excessive or unusual noise occurs, turn off and unplug the device. Check that the blades are well oiled and the fixing screws are tight. Contact customer service if the problem persists.

What is the warranty of the Cecotec Precisioncare Proclipper Titanium?

The device has a 2-year warranty from the date of purchase, covering manufacturing defects. The warranty does not cover normal wear, damage due to misuse, or unauthorized repairs.

Can I use the clipper in the shower or near water?

No, the device is not waterproof. Do not use the clipper near water, do not immerse it, or expose it to moisture. Make sure your hands are dry when handling.

USER MANUAL Precisioncare Proclipper Titanium CECOTEC

1. Safety instructions 09
2. Parts and components 34
3. Before use 44
4. Operation 44
5. Cleaning and maintenance 45
6. Technical specifications 46
7. Disposal of electrical appliances 46
8. Technical support service and warranty 46

SOMMAIRE

1. SAFETY INSTRUCTIONS

Read these instructions thoroughly before using the appliance. Keep this instruction manual for future reference or new users.

• Make sure that the mains voltage matches the voltage stated on the rating label of the appliance and that the wall outlet is grounded.
• This product is for household only. Do not use for commercial or industrial purposes and do not use outdoors.
• Check the power cord regularly for visible damage. If the cord is damaged, it must be replaced by the official Technical Support Service of Cecotec in order to avoid any type of danger.
• Do not use the device if its cord or any other part is damaged. In this case, contact the official Technical Support Service of Cecotec.
• Keep children away from the packaging

EN

materials. Risk of suffocation.

- The appliance must be checked frequently for signs of wear or damage. If such signs are present, of if the appliance has been used improperly, contact the official Technical Support Service of Cecotec. Do not try to repair the device by yourself.

- Switch off the device immediately in the event of defects or malfunctions.

- Do not use accessories or parts that have not been provided by Cecotec.

- Do not leave the device unattended while in use.

- Do not try to open, disassemble or repair the product. There are no serviceable parts inside the device.

- The device is exclusively designed for cutting natural hair. Do not use with artificial or animal hair.

- Cecotec accepts no liability for damage caused by improper or incorrect use.

- Do not immerse the cord, plug, or any non-removable part of the appliance in water or

any other liquid, nor expose the electrical connections to water. Make sure your hands are dry before handling the plug or switching on the appliance.

• Do not operate the device near water or in places where there is risk of getting wet.

- Do not use the device if your head skin is damaged or suffers from any type of illness.

- While the appliance is not being operated, ensure the protective cover is always assembled in its position.

- Turn off and unplug the device from the power supply before assembling or disassembling attachments.

- This appliance cannot be used by children or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge. Supervise young children to make sure that they do not play with the appliance.

1. INSTRUCTIONS DE SÉCURITÉ

1. Blades
2. Blade lever
3. On/off switch
4. Cable
5. Blade fixing screw
6. Blade cover
7. Clip-on guide combs (1.5 mm, 3 mm, 4.5 mm, 6 mm, 9 mm, 12 mm, 16 mm, 19 mm, 22 mm, 25 mm and 2 combs for ear zone)
8. Oil
9. Cleaning brush
10. Transport pouch

FR

1. Adjust the blade fixing screw if necessary
2. adjust the cutting length, from A to B
3. Clip-on comb
4. Oil the blades
5. Change and adjust blades
6. Transport pouch

FR

• Take the product out of the box.
- Remove all packaging materials. Keep the original box.
- Make sure all the components are included and in good conditions, otherwise, contact immediately the official Technical Support Service of Cecotec.
• Oil the device's blades before the first use.

4. OPERATION

• Connect the device to a power supply.
  • Turn on the clipper with the on/off switch.

Note: An audible click may sometimes be heard when switching the equipment on, it is a result of the drive unit switching on. This is completely normal.

How to adjust the blade fixing screw

The blades are fixed to the optimum position during manufacturing. Despite this, it can be modified due to voltage fluctuations. Use the blade fixing screw to reposition the blades at the desired position if necessary.

1. Switch the clipper on.
2. Turn the adjustment screw clockwise until you hear a noise.
3. Turn the adjustment screw anticlockwise until the noise stops. That is the optimum position.

How to change or readjust the blades

1. Turn off and disconnect the appliance from the power supply.
2. Undo both screws on the cutting unit, remove the bottom and top blade.
3. When assembling them back, both should be aligned. Ensure:
4. Adjust the blade lever to the shortest cutting length.

5. The distance between the front edge of the bottom blade and the front edge of the top blade should be between 0.8 mm and 1.5 mm.

6. The bottom and top blade should be positioned parallel to each other.

7. The first tooth of the top blade (from the left) must cover the first tooth of the bottom blade.
8. The top-right tooth of the top blade must touch the top-right large tooth of the bottom blade.
9. Tighten both screws.

How to adjust the cutting length

1. Blade lever:

The cutting length can be adjusted through the blade lever during operation or before the appliance is switched on.

Lift the lever for shorter haircuts, or push it down for longer-length haircuts.

2. Clip-on guide comb:

Depending on the type of haircut, the clipper can be operated with or without the comb attachment.

Place the attachment comb onto the cutting edge of the cutting set and press it down onto the cutting set until it clicks into position.

5. CLEANING AND MAINTENANCE

• Turn off and disconnect the device from the mains supply before cleaning, assembling or disassembling any of its parts.
• Do not use compressed air, abrasive scouring pads, powders or cleaners to clean the product.
• Do not immerse the appliance's body in water or any other liquid, or place it under running water.
• Clean the clipper and the attachments after each use.
• When any of the parts of the device are washed, dry them thoroughly before storing or using them again.
  • Do not wrap the cord around the device to store it.

6. TECHNICAL SPECIFICATIONS

Model: Bamba PrecisionCare ProClipper Titanium

Product reference: 04217

100-240 V \~ 50/60 Hz

Made in China | Designed in Spain

7. DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), specifies that old household electrical appliances must not be disposed of with the normal unsorted municipal waste. Old appliances must be collected separately, in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment.

The crossed out “wheeled bin” symbol on the product reminds you of your obligation to dispose of the appliance correctly. If the product has a built-in battery or uses batteries, they should be removed from the appliance and disposed of appropriately.

Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.

8. TECHNICAL SUPPORT SERVICE AND WARRANTY

This product is under warranty for 2 years from the date of purchase, as long as the proof of purchase is submitted, the product is in perfect physical condition, and it has been given proper use, as explained in this instruction manual.

The warranty will not cover the following situations:

EN

• The product has been used for purposes other than those intended for it, misused, beaten, exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault attributable to the customer.
• The product has been disassembled, modified, or repaired by persons, not authorised by the official Technical Support Service of Cecotec.
• Faults deriving from the normal wear and tear of its parts, due to use.
• The warranty service covers every manufacturing defects of your appliance for 2 years, based on current legislation, except consumable parts. In the event of misuse, the warranty will not apply.

If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec Technical Support Service at [phone].

FR

3. AVANT UTILISATION

8. GWARANCJA I OBSŁUGA KLIENTA