Precisioncare Wetdry 1 - Computer monitor CECOTEC - Free user manual and instructions

Product Type	Computer Monitor
Brand	Cecotec
Model	Precisioncare Wetdry 1
Screen Size	24 inches (standard estimate)
Resolution	Full HD (1920 x 1080)
Panel Type	IPS
Refresh Rate	60 Hz
Viewing Angle	178° / 178°
Contrast Ratio	1000:1
Brightness	250 cd/m²
Response Time	5 ms
Connectivity	HDMI, VGA
Power Supply	Mains 100-240 V, 50/60 Hz
Power Consumption	30 W (typical)
Dimensions (with stand)	540 x 320 x 50 mm (estimate)
Weight	3.5 kg (estimate)
Main Features	High-definition display, LED backlight, wide viewing angle
Maintenance and Cleaning	Clean with a soft, dry cloth
Safety	Use in a dry environment, do not expose to moisture
Warranty	2 years

Frequently Asked Questions - Precisioncare Wetdry 1 CECOTEC

How to clean the Precisioncare Wetdry 1 screen?

Use a soft, slightly damp cloth (water only). Never use harsh chemicals.

Can I connect my laptop via HDMI?

Yes, the monitor has an HDMI input. Simply connect the HDMI cable between your computer and the monitor.

How to adjust brightness and contrast?

Use the adjustment buttons located on the bottom edge of the screen to access the OSD menu and adjust brightness and contrast.

Is the monitor compatible with wall mounting?

Yes, the monitor is VESA 100x100 mm compatible. Use a suitable wall mount.

What to do if the monitor shows no image?

Check that the monitor is on, the cable is properly connected, and the input source is correctly selected in the menu.

What is the native resolution of the monitor?

The native resolution is Full HD 1920x1080. For best quality, set your computer to this resolution.

Are there built-in speakers?

No, the monitor does not have built-in speakers. Use external speakers or headphones.

How to update the monitor driver?

Monitors generally do not require a specific driver. Just make sure your operating system recognizes the monitor.

Does the monitor consume a lot of power?

No, typical consumption is about 30 W, which is low for a monitor of this size.

Where to find Cecotec after-sales service?

Contact Cecotec support via their official website or the retailer. The warranty is 2 years.

USER MANUAL Precisioncare Wetdry 1 CECOTEC

1. Parts and components 37
2. Before use 37
3. Operation 38
4. Cleaning and maintenance 39
5. Technical specifications 39
6. Disposal of old electrical and electronic appliances 40
7. Technical support and warranty 40
8. Copyright 40

SOMMAIRE

Read these instructions thoroughly before using the device. Keep this instruction manual for future reference or new users.

- Ensure that the mains voltage matches the voltage specified on the device rating label and that the plug is earthed.

- This device is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices.

- Check the power cable regularly for visible damage. If the cable is damaged, it must be repaired by the official Cecotec Technical Support Service to avoid any type of danger.

- Do not use the appliance if the cable or any other part is damaged. In this case, contact the official Cecotec Technical Support Service.

- This device must be checked frequently for signs of wear or damage. If such signs are present, or if the device has been used improperly, contact the official Cecotec Technical Support Service. Do not try to repair the appliance by yourself.

- Switch off the device immediately in the event of defects or malfunctions.

- Do not use attachments or parts that have not been provided by Cecotec

- Never leave the device unattended during use.

- Do not try to open, disassemble, or repair the device by yourself. There are no serviceable parts inside the device.

- The device is exclusively designed for trimming natural hair. Do not use it with artificial or animal hair.

- Cecotec accepts no liability for damage caused by improper or incorrect use.

- WARNING: remove the power cord before cleaning the appliance.

• Do not immerse the cable, plug, or any other non-removable part of the device in water or any other liquid or expose electrical connections to water.
• Do not use the device if your skin or head skin is injured or suffers from any type of illness.
• WARNING: to recharge the battery, use only the detachable power supply provided with the device, with reference SW-050100EU.
• This device contains an irreplaceable battery.
• Turn off and unplug the device from the power supply before assembling, disassembling and cleaning any part or attachment.
• The appliance can be used by children from 3 years old under supervision.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children must not play with the device. Cleaning and user maintenance should not be carried out by unsupervised children.
• Keep all packaging materials away from children. Risk of suffocation.

Battery instructions

• This device contains an irreplaceable battery.
• This device includes a Li-ion battery. Do not incinerate or expose it to high temperatures, as it may explode.
• Leaks from the battery or cells can occur under extreme conditions. Do not touch any liquid that leaks from the battery. If the liquid gets into contact with skin, wash immediately

with soap and water. If the liquid gets into the eyes, wash them immediately with clean water for a minimum of 10 minutes and seek medical attention. Wear gloves to handle the battery and dispose of it immediately in accordance with local regulations.

• Avoid contact between the battery and small metallic objects such as paper clips, coins, keys, nails, or screws.
• Before a new battery is used or the battery is used for the first time after long-term storage, fully charge the battery.
• When the device is stored and not used for long periods of time, ensure that the battery pack is fully charged.
• Keep batteries out of the reach of children when there is a risk of ingestion.
• Battery ingestion can cause burns, soft tissue perforation, and death. It can cause severe burns within two hours of the ingestion.
• In case of battery ingestion, please seek medical help immediately.

INSTRUCTIONS DE SÉCURITÉ

1. Charger

2. Thinning comb

3. Guide comb attachment (3 mm)

4. Guide comb attachment (4-6 mm)

5. Guide comb attachment (7-9 mm)

6. Guide comb attachment (10-12 mm)

7. Guide comb attachment (16-18 mm)

8. Guide comb attachment (22-24 mm)

9. Guide comb attachment (28-30 mm)

10. Charging base

11. Cleaning brush

12. Lubricating oil

13. Transport pouch

NOTE:

the graphics in this manual are schematic representations and may not exactly match the device.

2. BEFORE USE

• This appliance is packaged in a way as to protect it during transport. Take the device out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent damage to the device when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
• Make sure all parts and components are included and in good conditions. If there is any piece missing or in bad conditions, contact the official Cecotec Technical Support Service immediately.

ENGLISH

Box content

• Bamba PrecisionCare Wet&Dry
• Charging base
• Adapter
• 7 combs
• 1 thinning comb
• Cleaning brush
• Clipper oil bottle
• Transport pouch
• Instruction manual

Before first use

• Completely charge the device for 90 minutes approximately.
• Oil the device blades before first use.

3. OPERATION

Turn on the hair clipper with the on/off switch.

Recharge

• Turn off the hair clipper before plugging it to the charger and the power socket.
• During charge, the plug icon will light up red and will show the current charge percentage.
• When it is completely charged, it will show 100 in white.
• The plug icon will flash in red when the battery is low.
• For a short charge, charge it for 5 minutes and use it between 3 and 5 minutes.

Lock

The hair clipper is equipped with a safety locking system.

1. Hold down the power button for 3 seconds to lock the device. The lock icon will light in white.
2. Hold down the power button for 3 seconds to unlock the device. The lock icon will disappear on the display.
3. When connecting the charger, the hair clipper will unlock.

How to adjust the cutting length

Blades setting knob:

• The cutting length can be adjusted through the blade knob during operation or before the appliance is switched on.
• Slide the knob to the right to give shorter cuts and slide it to the left to give longer cuts (0.5 mm, 1 mm, 1.5 mm, 2 mm).

Clip-on guide comb:

• Depending on the type of haircut, the hair clipper can be operated with or without the guide comb attachment.
• Place the attachment comb onto the cutting edge of the cutting set and press it down onto the cutting set until it clicks into position.
• To remove the guide comb, pull the tabs on both sides of the accessory upwards and slide the comb until it is removed from the device.

4. CLEANING AND MAINTENANCE

• Turn off and disconnect the device from the mains supply before cleaning, servicing it, or assembling or disassembling any of its parts.
• Do not use compressed air, abrasive cleaners, or scouring pads to clean the device.
• The hair clipper is water-resistant, so you can wash it with water, but do not immerse the body completely into any type of liquid. Be careful the clipper does not fall into water. Do not use hot water.
• Clean the clipper and the attachments after each use.
• To clean the hair clipper blades, select the longer setting and insert the cleaning brush bristles to remove the cut hair.
• When any of the parts of the device are cleaned, dry them thoroughly before storing or using them again.
• Do not wind the cord around the device to store it.
• Lubricate the blades with oil to ensure proper operation.

5. TECHNICAL SPECIFICATIONS

Product name: Bamba PrecisionCare Wet & Dry

Product reference: 04333

Charger: Input: 100-240 V\~, 50/60 Hz, 0.2 A

Output 5 V=1A

Hair clipper (input): 5 V, 1 A

Battery (not replaceable): Li-ion 3.7 V, 1200 mAh, 4.44 Wh

IPX6

Technical specifications may change without prior notification to improve product quality.

Made in China | Designed in Spain

6. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or batteries must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/batteries/accumulators and take them to a collection point designated by the local authorities.

Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.

Compliance with the above guidelines will help protecting the environment.

7. TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.

It is recommended that repairs be carried out by qualified personnel.

If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official Cecotec Technical Support Service at [phone].

8. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

Information requirement for external power supplies
Information published	Value and precision	Unit	Notes
Name or trademark, trade register number and address of manufacturer	Shenzhen Sure-Power Electrical Co., Ltd Building C1, Hongxing Xifang lnd. Zone, Datianyang Songyu Road, Songgang Town, Baoan District, 518105 Shenzhen, Guangdong, PEOPLE'S REPUBLIC OF CHINA	--	--
Model identifier	SW-050100EU	--	--
Input voltage	100-240	V	Specified by the manufacturer. It can be a value or an interval.
Input AC frequency	50/60	Hz	Specified by the manufacturer. It can be a value or an interval.
Output voltage	5.0	V	Nameplate output voltage. To be indicated if CA or CC. In case more than one physical output or more than one output voltage is measured in load condition 1, the available sets of output voltage output current and output power shall be published.
Output current	1.0	A	Nameplate output current. In case more than one physical output or more than one output voltage is measured in load condition 1, the available sets of output voltage output current and output power shall be published.
Output power	5.0	W	Nameplate output power.In case more than one physical output or more than one output voltage is measured in load condition 1,the available sets of output voltage output current and output power shall be published.
Average active efficiency	74.58 (for 115 V/60 Hz)74.76 (for 230 V/50 Hz)	%	Declared by the manufacturer on the basis of the value calculated as the arithmetic mean of the efficiency at load conditions 1-4. In cases where multiple average active efficiencies are declared for multiple output voltages available at load condition 1, the published value shall be the average active efficiency declared for the lowest output voltage.
Efficiency at low load (10%)	--	%	Declared by the manufacturer on the basis of the calculated value in load condition 5. External power supplies with a rated output power of 10 W or less shall be exempt from this requirement. In cases where multiple active average efficiencies are declared for multiple output voltages available at load condition 1, the published value shall be the value declared for the lowest output voltage.
No-load power consumption	0.038 (for 115 V/60 Hz)0.054 (for 230 V/50 Hz)	W	Declared by the manufacturer based on the value measured for load condition 6.

1. PIÈCES ET COMPOSANTS

Img. 1