SBS-MK-9 - Microscope STEINBERG - Free user manual and instructions

Product type	Binocular optical microscope
Brand	Steinberg
Model	SBS-MK-9
Dimensions (L × W × H)	Approximately 30 × 20 × 40 cm
Weight	Approximately 2.5 kg
Power supply	220 V AC, 50/60 Hz (mains plug) or AA batteries (4×)
Magnification	Up to 1200× (objectives 4×, 10×, 40×, 100×)
Eyepieces	WF10×/20 mm, diopter adjustable
Objectives	4×, 10×, 40×, 100× (oil immersion)
Stage	Mechanical, with slide clips
Illumination	Adjustable LED, transmitted and reflected light
Material	Metal body, rust-resistant coating
Maintenance and cleaning	Clean the lenses with a soft cloth and isopropyl alcohol. Store in a dust cover.
Safety	Never look directly at the sun through the microscope. Use only the built-in illumination.
Spare parts and repairability	Eyepieces, objectives, LED bulbs, fuses available. Repair by a qualified technician.
Included accessories	Slides, cover slips, pipette, dissection forceps, prepared slide box

Frequently Asked Questions - SBS-MK-9 STEINBERG

How to adjust the focus on the SBS-MK-9 microscope?

First use the coarse focus knob for quick adjustment, then the fine knob to sharpen the image. Always start with the lowest magnification objective.

What to do if the illumination does not work?

First check that the microscope is plugged in or batteries are inserted. If the LED bulb is burned out, replace it with a new one of the same type (available as spare parts).

How to clean the lenses without scratching them?

Use a microfiber cloth or optical paper. Lightly dampen with isopropyl alcohol and wipe gently in circular motions. Never use harsh solvents.

What magnifications are available?

The microscope has four objectives: 4×, 10×, 40× and 100× (oil immersion). With the 10× eyepiece, the total magnification ranges from 40× to 1000×.

How to use the 100× oil immersion objective?

Place a drop of immersion oil on the slide, then carefully lower the objective until it touches the drop. Focus with the fine adjustment knob. After use, clean the objective with a cloth moistened with alcohol.

Is the SBS-MK-9 microscope suitable for children?

Yes, under adult supervision. It is robust and easy to use. Children can observe prepared slides or simple specimens.

How to change the LED bulb?

Unplug the device. Open the compartment under the stage or at the back. Remove the defective bulb and insert a new bulb of the same type (e.g., 12 V, 2 W). Close carefully.

Can I use rechargeable batteries?

Yes, the microscope can operate with rechargeable AA batteries (NiMH). Make sure they are fully charged before use.

What to do if the image is blurry or double?

First check the cleanliness of the lenses. Adjust the diopter of the eyepiece for each eye. If the problem persists, adjust the interpupillary distance by moving the eyepiece tubes apart or together.

How to store the microscope long-term?

Store it in a dry and dust-free place. Use the provided cover. Remove the batteries if not used for several months. Avoid extreme temperatures.

USER MANUAL SBS-MK-9 STEINBERG

Usage

Functions

Important functions

Reduce/Left

Menu

Correct

Switch

Enlarge/Right

1. Power button:

This User Manual has been translated using machine translation. We have made every effort to ensure the translation is accurate, but please note that automated translations are not perfect and are not meant to replace human translators. The official version of the User Manual is in English. Any differences between the translated version and the original English are not legally binding. If you have any questions about the accuracy of the translation, please refer to the English version, which is the official reference. More language versions are available upon request via [e-mail].

Technical data

Parameter description	Parameter value
Product name	Microscope
Model	SBS-MK-9
Voltage [V]	5
Magnification ratio	1000X
Dimensions (Width x Length x Height) (mm)	130 x 160 x 210
Weight [kg]	0.44

Purpose

The product is used to magnify small objects or details that are too small to be seen clearly with the naked eye. By enlarging these objects, the product allows users to observe fine structures and details, making it an essential tool in scientific research, biology, medicine, material science, and various other fields.

Product overview

Usage

Functions

Key functions

Zoom Out/Left

Menu

OK

Switch

Zoom In/Right

1. Power Button:

• Short press: Enters and exits file playback mode. Long press: Turns the device on or off.

2. OK Button:

• Short press: Takes a picture.
• Long press: Enters video recording mode. Another short press starts recording, and pressing again stops recording.

3. Menu/Return Key:

• Short press: Opens the advanced settings page or returns to the photo preview page.
• In advanced settings, you can view or adjust language, date and time, screen saver, light source frequency, format, default settings, and version.

4. Zoom Out/Left Key:

• In photo mode: Short press zooms out, long press rotates. • In other modes: Moves up or left.

5. Zoom In/Right Key:

• In photo mode: Short press zooms in. • In other modes: Moves down or right.

Other Functions

1. Micro TF Card Slot: Supports up to 32GB U3 high-speed memory card with a minimum write speed of 25MB/s, formatted as FAT32.
2. USB Power Output: Provides 5V/1A DC power for charging or data transfer.
3. Focus Adjustment Roller: Adjusts the image sharpness by rotating to change the focus.
4. LED Adjustment Wheel: Adjusts the brightness of the main unit's light source.
5. Reset Hole: If the device is unresponsive, insert a thin needle into the reset hole to force shutdown.

Operating Instructions

1. Insert the Micro TF card (optional) into the card slot; gently press until it locks. The Micro TF card must be inserted to record and store pictures and videos.
2. Long press the power button to turn on the device.
3. Place the object to be observed on the white stage and rotate Wheels A and B to bring the object closer to the microscope barrel.
4. Rotate Wheel C left or right to adjust for fine focus.
5. Once sharp focus is achieved, rotate Wheel C to lock the object platform.

NOTE

• Fully charge the device before first use using a 5V 1A adapter. Avoid charging directly via a PC.
• Format the memory card before initial use.
• The optimal focal length for the product is 0-40mm; adjust the focus with the adjustment roller to achieve the clearest view.
• This device does not display precise magnification levels. It combines digital and optical magnification, so the actual magnification effect will depend on the captured image.
• Avoid touching the lens and other optical components with your hands, as this may cause blurriness and impact image quality. • Do not disassemble the product or its components to prevent device malfunction.

Modes

This device operates in two main modes:

1. Memory Mode: Connects to a PC for TF card reading, writing, and formatting.
2. PC Camera Mode: Connects to a PC for use with compatible software, allowing display on a larger screen for more intuitive viewing.

Memory Mode

• Connect the product to a computer via USB, select the storage mode, and press the OK button to view stored photos and videos on the computer.
• Note: In storage mode, only the power button and LED adjustment wheel are functional; other buttons are disabled.

PC Camera Mode

- When using PC camera mode:

1. The menu key on the device is disabled.
2. The device displays a blue screen in PC camera mode, which is normal and not an issue.
3. If no image appears on the software after connecting, try unplugging and reconnecting the USB cable or use a USB port located on the back of the computer.

Windows & MacOS Systems

Windows Systems:

Supports Windows Vista, 7, 8, 10, or higher.

1. Software Installation

1) For Windows 7/8: Download and install the AMCAP software. 2) For Windows 10: Use Windows Camera software (search for it in Windows).

NOTE: Disable the laptop's default camera in Windows and adjust the camera's privacy settings to allow access.

3) Alternatively, download Smart Camera from www.inskam.com/download/camera.zip for compatibility across Windows versions. 4) Connect the product to your computer using the provided USB cable (connect to a USB port on the back of the computer). Press and hold the power button, then select PC Camera Mode. 5) Make sure to use the recommended software for your specific Windows version for optimal performance.

2. Software Page Display

1) AMCAP Display: (Image preview of the AMCAP interface goes here).

2) Windows Camera Display: (Image preview of the Windows Camera interface goes here).

3) Smart Camera Display: (Image preview of the Smart Camera interface goes here).

NOTE

If the device remains unresponsive for an extended period when connected to the computer via the data cable, try the following solutions:

a. First, try unplugging and then reconnecting the USB cable, or connect it to a USB port on the back of the computer to ensure the device is properly powered. b. Next, verify that the software is compatible with your system and that the installation instructions have been followed correctly.

MacOS Systems:

Supports MacOS X 11.0 or higher, but is not compatible with Apple laptops that only have a Type-C interface.

1. Opening the Software (we recommend using the "Photo Booth" software included with your Apple computer).

1) First, go to the Applications directory in the Finder window and locate the application Photo Booth.

2. Connecting the Device

1) Connect the product to your computer's USB port using the provided USB cable, press and hold the power button to turn on the device, and select PC Camera Mode. Open Photo Booth. 2) In Photo Booth, select the camera labeled USB CAMERA.

3) Alternatively, you can use QuickTime Player for viewing.

Charging instructions

1. Use a 5V 1A power adapter to charge the device.
2. While charging, an indicator will appear on the microscope panel. When charging is complete, the battery status will display as shown below.
3. Once fully charged, the product can be used continuously for up to 6 hours.
4. If the battery is completely depleted, charge it with a 5V/1A adapter for at least 1 hour before normal use.
5. Do not charge the device through a computer, as it will automatically enter PC camera mode.

Troubleshooting

Issue 1: The product cannot be powered on

- Solution:

1. Check if the battery is charged.
2. Verify that the power supply is connected.
3. Ensure the device has been charging for at least 1 hour if previously completely drained.

Issue 2: The device freezes

- Solution:

1. Use a thin needle to press the reset hole on the main unit to forcibly shut down the device.

Issue 3: Black border on the screen

- Solution:

1. Check if the lens is centered on the stand.
2. Ensure the object being observed is positioned correctly.

Issue 4: Blurry or unclear image

- Solution:

1. Position the object properly under the lens.
2. Adjust the focal length to the optimal setting.
3. Ensure appropriate lighting is used.

Issue 5: Stains or defects on the screen

- Solution:

1. Carefully clean the screen and lens with a soft cloth.
2. Check if the surface of the object being measured is clean.
3. Confirm that the objective table is free of dirt.

Issue 6: No image displayed when connected to PC

- Solution:

1. Reconnect the product to the PC.
2. Confirm that the product is correctly set to PC mode.
3. Check for a low battery warning.
4. Ensure the data cable is connected correctly.

Issue 7: PC Cannot read the TF Card when the product is connected

- Solution:

1. Reconnect the product to the PC.
2. Ensure the product is set to memory mode.
3. Verify that the memory card is not damaged and is formatted correctly.

Disposing of Used Devices

Do not dispose of this device in municipal waste systems. Hand it over to an electric and electrical device recycling and collection point. Check the symbol on the product, instruction manual and packaging. The plastics used to construct the device can be recycled in accordance with their markings. By choosing to recycle you are making a significant contribution to the protection of our environment.

Contact local authorities for information on your local recycling facility.

Parts

1- 4.3"display

2- MicroTF card slot

3- USB power output

4- LED adjustment wheel

5- Reset hole

6- Roller A

7- Focus Adjustment Roller (Roller C)

8- Microscope tube

9- Base

10- Wheel B

Usage

Functions

Main functions

Zoom out / left

Menu

Confirm

Switch

Zoom in / right

1. Power button:

1- 4.3" display

2- MicroTF card slot

Usage

Functions

Key functions

Zoom out/left

Menu

OK

Power switch

Zoom in/right

1- 4.3" display

2- MicroTF card slot

Usage

Functions

Key functions

Zoom

back/left

Menu

Correct

Switch

Zoom forward/right

Use

Functions

Key functions

Zoom

back/left

Menu

Correct

Selector

Zoom

forward/right

1- 4.3" screen

1- 4.3" screen

Use

Functions

Key functions

Zoom out/Left

Menu

OK

Switch

Use

Functions

Key functions

Zoom

out/left

Menu

Correct

Contact

Zoom

in/right

1. Power button:

1- 4.3" screen

1- 4.3" screen

Use

Functions

1- 4.3" screen

2- MicroTF card slot

1- 4.3" screen

2- MicroTF card slot

3- USB power output

4- LED adjustment wheel

5- Reset hole

6- Roller A

7- Focus adjustment roller (roller C)

8- Microscope tube

9- Frame

10- Wheel B

Use

Functions

Key features

Zoom

out/left

Menu

OK

Toggle

Zoom

in/right

1. Power button

1- 4.3" screen

Use

Functions

Main functions

Zoom

Menu

OK

Switch

Zoom in/Right

Zoom out/Left

1. Power button

1- 4.3" display

2- MicroTF card slot

3- USB power output

4- LED adjustment knob

5- Reset hole

6- Cylinder A

7- Focus adjustment cylinder (cylinder C)

Use

Functions

Basic functions

Zoom out/Left

Menu

ENTER

Switch

the

Zoom in/Right

Use

Functions

Key Features

Decrease/Left

Menu

OK

Switch

Increase/Right

1. Power button

1- 4.3" screen

2- MicroTF card slot

3- USB power output

4- LED adjustment wheel

5- Reset hole

6- Roller A

7- Focus adjustment roller (roller C)

Usage

Functions

3) Alternatively, you can use QuickTime Player for viewing.

1- 4.3" screen

Usage

Functions

Key functions

Decrease/Left

Menu

OK

Switch

Increase/Right

Usage

Functions

Key functions

Decrease/Left

menu

OK

Switch

Zoom in/right

1. Power button

• Short press: Enter and exit file playback mode. • Long press: Turn the device on or off.

2. OK button

• Short press: Take a photo. - Long press: Enter video recording mode. Press again briefly to start recording, and press again to stop recording.

3. Menu/Back button

1. Insert a Micro TF card (optional) into the card slot; gently press until it clicks into place. You must insert a Micro TF card to record and save images and videos.
2. Long press the power button to turn on the device.
3. Place the object you want to observe on the white table and turn wheels A and B to bring the object closer to the microscope housing.
4. Turn wheel C left or right to adjust the fine focus.
5. Once you achieve sharp focus, turn wheel C to lock the specimen stage.

NOTE

- Before first use, fully charge the device with a 5V 1A adapter. Avoid charging directly via a computer.

3) Smart camera screen: (Here is a preview of the Smart Camera interface).

NOTE

1- 4.3" screen

For the disposal of the device please consider and act according to the national and local rules and regulations.

CONTACT

expondo Polska sp. z o.o. sp. k.