BABY GYM DELUXE - Play mats CHICCO - Free user manual and instructions

USER MANUAL BABY GYM DELUXE CHICCO

Please read these instructions carefully and keep for future reference.

This toy requires 3 × "AA" 1.5 Volt type batteries (not included).

WARNING

For your child's safety: WARNING!

• Before use remove and dispose of any plastic bags and any other packaging (e.g. fasteners, fixing ties, etc.) and keep them out of reach of children.
• This toy must only be assembled by an adult.
• Check the toy regularly for signs of wear and damage, and to ensure that it is assembled correctly. Should any part be damaged, do not use and keep out of reach of children.
• The toy must always be handled with care; it must not be exposed to sources of heat and/or kept in damp places; it must not be repaired, modified, tampered with by the purchaser, or unqualified persons.
• This toy must only be used under adult supervision.
• Always check that the central electronic activity panel is safely fitted to its support frame before using the gym and multi-activity panel (see "How to Assemble the Gym").
• Prevent your child from climbing or sitting on the toy's surface, since it has not been designed to support its weight.

INTRODUCTION TO THE ACTIVITY CENTRE

This delightful gym is an important activity centre whose lights, sounds, and colours stimulate baby to co-ordinate its first movements.

The gym, which becomes a multi-activity panel, has 3 play positions: baby can lie on its back, sit down or standing up.

Playing in the lying position is particularly recommended starting from 3 months of age. During this period, baby starts to make its first movements: it tries to reach and touch objects and starts to raise its head and torso.

Playing sitting down, is ideal starting from 9 months of age. During this period, baby starts to sit independently.

Playing standing up is ideal from approximately 12 months of age, when baby starts to take its first steps.

INSTRUCTIONS ON HOW TO ASSEMBLE THE GYM

Deluxe Gym can be assembled in 3 different positions, allowing your child to:

1. Play lying down (From 3 Months +)
2. Play sitting down (From 9 Months +)
3. Play standing up (From 12 Months +)

How to Assemble the Toy for Play Position No. 1

1. Place the electronic panel on the floor, onto a flat surface, as shown in diagram A.
2. Hold the leg from the part where the single locking button is located, as shown in diagram B. Press

the locking button and fit the leg of the electronic panel; a click is heard, indicating that it has locked into position.

1. Repeat the operation with the other 3 legs (diag. C).
2. Hold the support base, as shown in diagram D (The curved part must remain in the external position). Press the side buttons, located in the lower part of the leg, fit the support base into slot A, until a click is heard, indicating that it has locked into position.
3. Repeat the operation with the other leg. Take hold of the other support base and repeat the operation with the other 2 legs (diag. E).
4. Place the gym on the floor, onto the support bases (diag. F). Turn the fixed electronic panel until the arrow marked on the panel's shoulder corresponds to symbol 1, located on the panel (F-1).
5. Once the panel has been inserted correctly into the slot, fix it turning the side knob in a clockwise direction, until the symbol has been reached (diag. G). A click will indicate that the panel is correctly locked into position.
6. Lower the fastening fixtures, located on the lower part of the panel (diag. H).
7. Fasten the swinging toy by sliding the fabric fastener inside the fastening fixture (diag. 1).
8. Fasten the fabric fastener tightly, sliding it into the fastening fixture, as shown in diagram I, and adjust it according to the child's height.
9. Repeat the operation with the other 2 swinging toys. The gym will look as shown in diagram L.

Changing the Play Position from No. 1 to No. 2

1. Remove the 3 swinging toys, taking off the fabric fastener from the fastening fixture.
2. Press the safety button, located at the base of the knob, and, at the same time, turn the knob in an anticlockwise direction, positioning it vertically on the symbol (diag. M).
3. Repeat the operation on the other side.
4. Turn the fixed electronic panel to the initial position, as shown in diag. M;
5. Place the gym onto the floor, as shown in diagram N. Remove the support bases, by pressing the side buttons located on the lower part of the legs.
6. Press the button, located at the side of the electronic panel's shoulder, and remove the leg as shown in diagram O.
7. Repeat the operation with the other 3 legs.
8. Fit the shoulders of the electronic panel into slots B of the support base; a click is heard, indicating that they have locked into position (diag. P).
9. Repeat the operation with the other support base (diag. Q).
10. Place the gym on the floor, onto the support bases (diag. R). Turn the 2 panels externally, one at a time, until the arrow marked on the shoulder corresponds to symbol 2, located on the panel.
11. Once the panel has been inserted correctly into the slot, fix it turning the side knob in a clockwise direction, until the symbol has been reached (diag. S). A click will indicate that the panel is correctly locked into position.
12. If the toy has been assembled correctly, the multi-activity panel in position 2 should look as shown in diag. T.

Changing the Play Position from No. 2 to No. 3

1. Press the safety button, located at the base of the knob, and, at the same time, turn the knob in an anticlockwise direction, positioning it vertically on the symbol (diag. M).

2. Repeat the operation on the other side.

3. Turn the electronic panel to the initial position, as shown in diag. M;

4. Take the panel and lay it down on the floor, as shown in diagram U. Remove the support base from the panel.
5. Turn the fixed electronic panel to the initial position, as shown in diag. M.
6. Hold the leg from the part where the single locking button is located, as shown in diagram B. Press the locking button and fit the leg of the electronic panel; a click is heard, indicating that it has locked into position.
7. Repeat the operation with the other 3 legs (diag. C).
8. Hold the support base, as shown in diagram D (The curved part must remain in the external position). Press the side buttons, located in the lower part of the leg, fit the support base into slot A, until a click is heard, indicating that it has locked into position.
9. Repeat the operation with the other leg. Take hold of the other support base and repeat the operation with the other 2 legs (diag. E).
10. Place the gym on the floor, onto the support bases (diag. R). Turn the 2 panels externally, one at a time, until the arrow marked on the shoulder corresponds to symbol 2, located on the panel.
11. Once the panel has been inserted correctly into the slot, fix it turning the side knob in a clockwise direction, until the symbol has been reached (diag. S). A click will indicate that the panel is correctly locked into position.
12. If the toy has been assembled correctly, the multi-activity panel in position 3 should look as shown in diag.V.

HOW TO USE THE ACTIVITY PANEL

• To switch the electronic activity panel ON, simply move the switch located near the keyboard keys from the OFF to the (<)) / (<)) position, according to the desired volume (diagram 1). A fun light display and a melody confirm that the activity panel has been activated.
• To avoid wasting battery power, it is recommended to always switch off the activity panel after use, by moving the switch to the OFF position (diagram 1).
• The 3 musical swings with the 2 fun teddy bears and 1 dog character, encourage baby to move forward to touch them, and activate fun melodies accompanied by an amusing light display. This activity helps baby to develop its manual/visual co-ordination skills and audio/visual abilities.

HOW TO USE THE MULTI-ACTIVITY PANEL

• After having removed the fabric fastener, the three swinging toys can be used separately, in the area designed for the insert game, located on the multi-activity panel.

• The central panel has several activities, which stimulate baby's co-ordination, musical and logical associative skills:

• A first musical keyboard that features fun melodies.
  -A booklet to look at.

• A spiral that turns when the frog moves.
• A roller that turns when the lever is pressed.
• Fun animal character inserts, which will help baby to recognise geometrical shapes.
• Colourful spheres that rotate when the yellow disc is activated.

FITTING AND/OR REPLACING THE BATTERIES

• Batteries must only be fitted by an adult.

• To replace spent batteries: Loosen the screw on the battery compartment cover with a screwdriver and open the cover. Then remove the spent batteries and fit new ones, ensuring that they have been fitted in the correct polarity (as shown on the product), close the battery cover, and tighten the screw.

• Always keep batteries and tools out of reach of children.
• Always remove spent batteries from the toy, to avoid the danger of possible leakage from the battery damaging the product.
• Always remove the batteries if the toy will not be used for a long period of time.
• Only use alkaline batteries of the same type or equivalent to the type recommended for the correct function of this product.
• Never mix new and old batteries, or different types of batteries.
• Do not burn or dispose of spent batteries into the environment. Dispose of spent batteries at an appropriate differentiated collection point (i.E. Designated rubbish bins or refuse site).
• Do not short-circuit the battery terminals.
• Do not attempt to recharge non-rechargeable batteries: they might explode.
• The use of rechargeable batteries is not recommended, since they could impair the toy's functionality.
• If rechargeable batteries are used, take them out of the toy before recharging them. Batteries must always be recharged under adult supervision.

This product complies with EU Directive 2002/96/EC.

EU 2002/96/EC buy another similar appliance. The user is responsible for taking the appliance to a special waste disposal site at the end of its life. If the disused appliance is collected correctly as separate waste, it can be recycled, treated and disposed of ecologically; this avoids a negative impact on both the environment and health, and contributes towards the recycling of the product's materials. For further information regarding the waste disposal services available, contact your local waste disposal agency or the shop where you bought the appliance.

CARE & MAINTENANCE

• Clean the electronic panel with a soft dry cloth; do not submerge the toy in water to prevent the risk of damaging the electronic circuit.
• Clean the frame with a soft cloth slightly soaked in water.
• For maximum hygiene, clean the 3 swing toys with a soft cloth slightly soaked in a sterilising solution diluted in water, as indicated for standard cold sterilisation. Do not use undiluted sterilising liquid. Do not clean in the dishwasher.
• Protect the toy from heat, dust, sand, and water.

Artsana S.p.A. reserves the right to modify at any time the colours and decorations of the product.

Made in China.

Age: 3 ~m+

MANUEL D'INSTRUCTIONS

MISE EN PLACE ET/OU REMPLACEMENT DES PILES

MEPbI PPEIOCTOPOXHOCTN

BceIax 6e3oNaChocnT TBOero pe6eHka:BhImaHne!

• Параи NCПОЛьЗОВАнEMСЯТьСИЗДЕЛЯВОЗМоЖныЕпlaCTИКOBБIEпаKeТыИдPyгпЕЭЛЕмEHыУнakOBКи(TaKHe KaKshHpybI,Крелжнble DeTaJI,Np.)ИdePkaTbNxBdaJIOn OT DeTeN.
  ToIbKO B3POCSIbe IOnJXHbI npOIN3BOaNTb C6OpKy DaHNHO INrpbI.
• Perynphno npOBepaTb npouHocTb c6OpKn nIgPbI, COCTOAHne u CEIOCTHOCTb N3dJIeNIA (N3HOC, NOBpeJckDeHNA). EcIn ngpyuKa pONOMHa, He nOJIb3OBAtbcra eIO n IdepXaTb eE B HeIOCTyINHom dIpa pe6EhKa MeCTe.
• IpeoOxApaHbI n3dEInne O T naDEnn yUdpOB; IepXaTb B cyxOM MeCTe BdaJI N OT NCTOCHIKOB TeIIa I BlaRi; NOKyPntelb I HeKBaIIuNcIpOBaHHbI nepCOHaJI He DOnJXhbl peMOHTnpOBaTb I MOINuNcIpOBaTb n3dEInne.
  -ПользоваТбсИгрОТольКВписутCBиВЗрOCлБИX.
• KaçdBi pa3 nepeɪn cNoIb3OBAHneM "CnOpT3aJa" n CToJIka npOBepaTb, yTObI ceHTpaJIbHaJ
• ΕηeKtpoHHa nAhen b6bIa NaIeJxHO BBeJeHa B OOnOpHyIO CTpyKTypy (CMOTpIte "UHCTpyKcIg Nc6OpKe rIMHaCTnueCKOrO KOMIIeKca").
  He nO3BOJrB pe6Ehky caIITbcra I CTaHOHTbcra HOrAMn Ha INrpoByIO qAcTb, T. K. 3Ta INrpa He CMOXeT BbIepKJaTb BeC pe6EhKa.

BVEDEHNE B INTPY

3TOT BEcEbIy "CnOpT3aJ" npEcdTaBlaeret cO6o BaxHbI yrpoBOy ueHTp, rJe pe6eHOK ynpaxHraETc KoOpDHHPOBaTb nepBbIe DvNKeHnY, YBLeueHHbOroHbKaMn, 3ByKaMn uCBeTOM.

"ΓMnHaCTnueckn KOMnJIeKc" IMeET 3 nO3nCnI nIgpy: JxHa CnHHe, CnIa I CTOr, a TaKxe npEeBaAeTcB INrPoBOI CToI.

IoloxeHne InrgbI IjexHa CnHe OcO6o peKomeHIOBaHO nOcNe 3 MeCzE, TaK KaK peBcHOK NaunHaet NODHMaTb rOIOBky u TynOBuIe u BblONHrTb nepBbIe DnXKeHnC cZeJIbIO DoCTaTb I npBvLeyb K Ce6e npEdMeTbI.

( 2) _1 = 4

Jaiuillgaiyolalouellioa haoos

1auii:llalokjloai

Joo Joo Joo Joo Joo Joo Joo Joo Joo Joo Joo

JLabi Jglio jc Loo g (c) ycg cii sljg

aJg Jc Lg C g aol A. cwh wglg j Jabll gosolai

aLLJcdo

gjgl 1 a jg21 ails > g w iig awwle Jalal JlSol y a Ic aag o c bolni jy o le81 all

a

:Eluag3 1111111111111111111111111111111

100000000000000000000000000000

3 1 1 1 1 1 1 1 1 1 1 1 1

5golll 100> aag a, gj j 11s9 aga sl 1 Jg Jogogu L 1s3Jg

Jg 10000000000000000000000000000000000000000000

. d.c Lw0

Jg 120 120

ad = 16

JLJI JI 5ji JLO

Jalil 3 3 150x150x150

(4) ( 3,2) .

(+g9) 1 g11

(12) JcJ 3

1

A aagglglo Jao hww gge aaiy 1 y aigjslil aogll sliwi.1

ailll jj 111 jj hie B oagally Cogggo Lolo yolal ljj aeg no algall

Lgjjj 5g j a b ELoaw a [] a g j sJx J a>JJ