CH3200E - Battery EGO - Free user manual and instructions

Product type	Battery charger
Brand	EGO
Model	CH3200E
Input voltage	220-240 V~50 Hz
Input power	320 W
Output voltage	56 V ---
Output current	4.7 A
Compatible battery types	Lithium-ion 56 V DC batteries, max. 12.0 Ah (BA1400, BA2800, BA4200, BA1400T, BA2242T, BA2240T, BA2800T, BA3360T, BA4200T, BA5600T, BA6720T)
Charging time	35 min (2.5 Ah) to 160 min (12 Ah)
Optimal charging temperature	5 °C – 40 °C
Weight	1.12 kg
LED indicators	2 LEDs on charger + battery power indicator
Functions	Automatic recharging, temperature detection, ventilation
Wall mounting	Possible (mounting holes)
Protection class	Class II (double insulation)
Usage	Indoor only
Safety	Time-delay fuse, CE, UKCA, WEEE compliance
Maintenance	Clean with a dry cloth; avoid solvents
Replacement parts	Only identical EGO parts
Repair	By a qualified repairer at an EGO repair center
Warranty	See egopowerplus.com for terms

Frequently Asked Questions - CH3200E EGO

What types of batteries can I charge with the CH3200E charger?

The CH3200E charger is compatible with EGO 56 V DC lithium-ion batteries with a maximum capacity of 12.0 Ah, including models BA1400, BA2800, BA4200, BA1400T, BA2242T, BA2240T, BA2800T, BA3360T, BA4200T, BA5600T and BA6720T.

How long does it take to charge a battery?

Charging time varies according to battery capacity: 35 minutes for a 2.5 Ah battery, 55 min for 4.0 Ah, 70 min for 5.0 Ah, 80 min for 6.0 Ah, 100 min for 7.5 Ah, 130 min for 10 Ah and 160 min for 12 Ah.

What do the LED indicators on the charger mean?

LED 1 flashes green during charging (<80%), becomes solid green at 80%, then both LEDs become solid green when charging is complete. LED 2 solid red indicates a battery too hot or too cold, and flashes red in case of a fault.

What to do if LED 2 flashes red?

This indicates a fault with the battery or charger, or a poor connection. Reinsert the battery, try another battery, or unplug the charger and plug it back in after a few seconds. If the problem persists, the charger may be defective.

Can I use the charger outdoors?

No, the charger must be used indoors only. Do not expose it to rain, moisture or wet environments to avoid electric shock risk.

How to install the charger on the wall?

The charger has two wall mounting holes spaced 101.6 mm apart. Use screws strong enough to support the weight of the charger and battery. Hang only vertically to prevent the battery from falling.

Does the charger heat up during charging?

Yes, it is normal for the charger to heat up during charging. Always charge in a well-ventilated area to ensure adequate cooling.

How to maintain the charger?

Clean the charger with a clean, dry cloth. Do not use solvents or petroleum-based products, as they may damage plastic parts. Before cleaning, unplug the charger and remove the battery.

What to do if the power cord is damaged?

If the power cord is damaged, it must be replaced by the manufacturer, its after-sales service or a similarly qualified person to avoid any danger. Do not use the charger with a damaged cord.

How to recycle the charger at end of life?

Do not dispose of the charger with household waste. Take it to an approved recycling center or follow local guidelines for separate collection of waste electrical and electronic equipment (WEEE).

USER MANUAL CH3200E EGO

Line drawing of a mechanical component with no visible text or symbols

CH3200E

320W CHARGER

Technical line drawing of a mechanical device with an arrow indicating direction (no text or symbols present)

BA1400, BA2800, BA4200,

BA1400T, BA2800T, BA4200T,

BA5600T, BA2240T, BA2242T,

BA3360T, BA6720T

READ ALL INSTRUCTIONS!

READ OPERATOR'S MANUAL

⚠️ Residual risk! People with electronic devices, such as pacemakers, should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker.

WARNING: To ensure safety and reliability, all repairs should be performed by a qualified service technician.

WARNING: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.

WARNING: Be sure to read and understand all safety instructions in this Operator's Manual, including all safety alert symbols such as "DANGER," "WARNING," and "CAUTION" before using this tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate.

Safety Alert

Precautions that involve your safety

	Read Operator's Manual	To reduce the risk of injury, user must read the operator's manual.
	Indoor Use Use this device indoors only
	Class II Construction	Double-insulated construction
T6,3A	Fuse-links Time-lag miniature fuse-link
CE	CE	This product is in accordance with applicable EC directives.
UKCA	UKCA UK Conformity Assessed
	WEEE	Waste electrical products should not be disposed of with household waste. Take to an authorized recycler.
V Volt Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
~	Alternating Current	Type of current
---	Direct Current Type or a characteristic of current

WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.

WORK AREA SAFETY

• Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate the EGO charger in explosive environments, such as in the presence of flammable liquids, gases, or dust. A charger might create a spark, which may ignite the dust or fumes.

ELECTRICAL SAFETY

■ Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with grounded power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.

EN

■ Do not expose the charger to rain or wet conditions. Water entering the charger will increase the risk of electric shock.

- Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the charger. Keep the cord away from heat, oil, sharp edges, or moving parts. Damaged or entangled cords increase the risk of electric shock.

- Avoid body contact with grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.

- When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

■ The EGO charger can charge the EGO lithium-ion battery packs listed in fig.B

■ Charge only 56V d.c., max.12.0 Ah Li-ion type rechargeable battery packs. Other types of batteries may burst causing personal injury and damage.

SERVICE

- Have your charger serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the charger is maintained.

- When servicing a charger, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow the Maintenance instructions may create a risk of shock or injury.

SAFETY RULES FOR CHARGER

CAUTION: To reduce the risk of electric shock or damage to the charger and battery, charge only those lithium-ion rechargeable batteries specifically designated on your charger's label. Other types of batteries may burst, causing personal injury or damage.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

■ Before using the battery charger, read all instructions and cautionary markings in this manual and on the battery charger, the battery and the product using the battery to prevent misuse of the products and possible injury or damage.

- Do not use the charger outdoors or expose it to wet or damp conditions. Water entering the charger will increase the risk of electric shock.

- Do not handle charger, including the charger plug and charger terminals with wet hands.

- Use of an attachment not recommended or sold by the battery-charger manufacturer may result in a risk of fire, electric shock, or injury to persons.

- Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

- Do not abuse the cord or charger. Never use the cord to carry the charger. Do not pull the charger cord to disconnect the plug from a receptacle. Damage to the cord or charger could occur and create an electric shock hazard. Replace damaged cords immediately.

■ Make sure that the cord is located so that it will not be stepped on, tripped over, come in contact with sharp edges or moving parts, or otherwise be subjected to damage or stress. This will reduce the risk of accidental falls, which cause injury and damage to the cord, which could then result in an electric shock.

- Keep the cord and charger away from heat to prevent damage to housing or internal parts.

- Do not allow gasoline, oils, petroleum-based products, etc. to come in contact with plastic parts. These materials contain chemicals that can damage, weaken, or destroy plastic.

- Do not operate the charger with a damaged cord or plug, which could cause shorting and electric shock. If damaged, have the charger repaired or replaced by an authorized service technician at an EGO Service Center.

- Do not operate the charger if it has received a sharp blow, been dropped, or has otherwise been damaged in any way. Take it to an authorized service technician for an electrical check to determine if the charger is in good working order.

- Do not disassemble the charger. Take it to an authorized service technician when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.

■ Unplug the charger from the electrical outlet before attempting any maintenance or cleaning to reduce the risk of electric shock.

- Disconnect charger from the power supply when not in use. This will reduce the risk of electric shock or damage to the charger if metal items should fall into the opening. It will also help prevent damage to the charger during a power surge.

• Risk of electric shock. Do not touch the uninsulated portion of output connector or uninsulated battery terminal.
• Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you lend this tool to someone else, also lend these instructions to them to prevent misuse of the product and possible injury.

IMPORTANT SAFETY INSTRUCTIONS

■ Save these instructions. This manual contains important safety and operating instructions for EGO 56V Charger CH3200E.

■ Before using the battery charger, read all instructions and cautionary markings on the battery charger, the battery and the product using the battery.

WARNING: When using electric appliances, basic precautions should always be followed, including the following.

■ To reduce the risk of injury, close supervision is necessary when an appliance is used near children.
■ Only use attachments recommended or sold by manufacturer.
■ Do not use outdoors.
- For a portable appliance – To reduce the risk of electrical shock, do not put charger in water or other liquid. Do not place or store appliance where it can fall or be pulled into a tub or sink.

CAUTION: To reduce the risk of injury, charge only lithium-ion rechargeable batteries. Other types of batteries may burst, causing personal injury or damage.

SPECIFICATIONS

Charger Input 220-240 V~50 Hz, 320 W
Charger Output	4.7A 56 V ---
Charging Time	35 minutes for 2.5 Ah battery pack55 minutes for 4.0 Ah battery pack70 minutes for 5.0 Ah battery pack80 minutes for 6.0 Ah battery pack100 minutes for 7.5 Ah battery pack130 minutes for 10 Ah battery pack160 minutes for 12 Ah battery pack
Optimum Charging Temperature	5°C-40°C
Charger Weight	1.12 kg

DESCRIPTION

KNOW YOUR CHARGER (Fig. A)

1. Cooling Air Port
2. LED Indicator 2
3. LED Indicator 1
4. Mounting Slot
5. Electrical Contacts
6. Wall Mounting Holes

OPERATION

HOW TO CHARGE THE BATTERY PACK

WARNING: Do not use the charger outdoors or expose it to wet or damp conditions. Water entering the charger will increase the risk of electric shock.

NOTICE: Lithium-ion battery packs are partially charged before shipping. Before using it for the first time, fully charge the battery pack.

1. Connect the charger to the power supply (220-240V \~ 50Hz). LED Indicator 1 briefly shines green and LED Indicator 2 briefly shines red at the same time, indicating that the charger is working properly.
2. Align the raised ribs of the battery pack with the mounting slots in the charger; slide the battery pack down onto the charger, as shown in Fig. B.
3. The charger will communicate with the battery pack to evaluate the condition of the battery pack.

EN

1. When charging a battery pack, LED Indicator 1 on the charger flashes green. For the BA1400, BA2800, BA4200 battery packs, the power indicator on the battery pack flashes red, orange and green in sequence. For the BA1400T, BA2242T, BA2240T, BA2800T, BA3360T, BA4200T, BA5600T and BA6720T battery packs. The last segment of 5-LED indicator on the battery pack will flash green. The fan in the charger works continuously to cool the charger.
2. When the battery pack is 80% charged, LED Indicator 1 stops flashing and remains green while LED Indicator 2 starts flashing green.
3. When the battery pack is fully charged, both LED indicators on the charger remain green, and the

power indicator on the battery pack goes out. Wait for the cooling air fan to stop, remove the battery pack from the charger and disconnect the charger from the power supply.

NOTICE:

• A significant reduction in the running time of a fully charged battery pack indicates the battery's life is coming to an end and that the battery pack must be replaced.
  ■ The charger may get warm during charging, which is normal. Charge your battery pack in a well-ventilated area.

LED FUNCTIONS OF CHARGER

For BA1400, BA2800, BA4200

LED INDICATOR	BATTERY PACK	LED INDICATOR 1 ON THE CHARGER	LED INDICATOR 2 ON THE CHARGER	POWER INDICATOR ON THE BATTERY PACK	ACTION
[T70C]	Charging Flashing Green Off			Flashing red, orange and green in sequence	Charging (<80%)
[0x58]	80% charged Solid Green Flashing	Green Charging (80% to 100%)
	Fully charged Solid Green Solid Green Off				Charging is complete. Maintenance charging.
	Defective Off		Flashing Red or off	Off	The battery pack or charger is defective.
[YH82]	Cold/Hot battery	Off Solid Red	Off		Battery pack is too hot or too cold.

For BA1400T, BA2240T, BA2242T, BA2800T, BA3360T, BA4200T, BA5600T and BA6720T

LED INDICATOR	BATTERY PACK	LED INDICATOR 1 ON THE CHARGER	LED INDICATOR 2 ON THE CHARGER	5 LED INDICATORS ON THE BATTERY PACK	ACTION
(ZYY)	Charging Flashing Green Off			The last lit LED indicator flashing green while former ones are solid green	Charging (<80%)
(DZXD)	80% charged Solid Green Flashing	Green Charging (80% to 100%)
	Fully charged Solid Green Solid Green Off				Charging is complete. Maintenance charging.
	Defective Off		Flashing Red or off	Off	The battery pack or charger is defective.
	Cold/Hot battery	Off Solid Red Off			Battery pack is too hot or too cold.

CHARGING A HOT OR COLD BATTERY PACK

If the temperature of a battery pack being charged is outside the normal range, LED Indicator 2 will remain red. Cool down the battery pack or warm it up. If charging does not restart when the temperature of the battery pack returns to normal, reinsert the battery pack.

DEFECTIVE BATTERY PACK OR CHARGER

If the charger detects a problem, LED Indicator 2 will flash red.

1. Reinsert the battery pack. If LED Indicator 2 flashes red again, try a different battery pack.
2. If the second battery pack charges normally, dispose of the faulty battery pack (please refer to the instructions in the battery pack manual).
3. If a different battery pack cannot solve the problem, unplug the charger and wait for LED Indicator 2 to go out. Then reconnect the plug to the power supply. If LED on charger still display defective, the charge may be defective.

WALL-MOUNT HOLES

The charger has wall mounting holes for convenient storage (Fig. A-6). Install two screws in the wall 101.6 mm apart. Use screws sufficiently strong to support the combined weight of the charger and battery pack.

To prevent the battery pack from falling off, hang the charger only in the vertical orientation.

MAINTENANCE

WARNING: To avoid serious personal injury, be sure to remove the battery pack from the tool before cleaning or maintenance.

WARNING: When servicing, use only identical EGO replacement parts. Use of any other parts may create a hazard or cause product damage. To ensure safety and reliability, all repairs should be performed by a qualified service technician at an EGO Service Center.

WARNING: It is not recommended to use

compressed dry air to clean the charger. If this is the only way for cleaning, be sure to wear safety goggles or safety glasses with side shields. If it is a dusty process, wear a dust mask.

⚠ WARNING: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts, because most plastics are susceptible to damage from various types of commercial solvents. Use a clean piece of cloth to remove dirt, dust, oil, grease, etc.

WARNING: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc. come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic, which may result in serious personal injury.

WARNING: When servicing, use only identical EGO replacement parts. Use of any other parts may create a hazard or cause product damage. To ensure safety and reliability, all repairs should be performed by a qualified service technician at an EGO Service Center.

EN

Protecting the environment

Do not dispose of electrical equipment, used battery and charger into household waste! Take this product to an authorized recycler and make it available for separate collection. Electric tools must be returned to an environmentally compatible recycling facility.

TROUBLESHOOTING

PROBLEM CAUSE SOLUTION
The charger does not work. LED Indicator 2 flashes red.	The battery pack or charger is malfunctioning or the connection between the battery pack and charger is poor.	■ Reinsert the battery pack.■ Try a different battery pack.■ Unplug the charger, wait for LED Indicator 2 to go out, an then reconnect the plug to the power supply.
The charger does not work and LED Indicator 2 shines solid red.	The battery pack is too hot or too cold.	Cool down the battery pack or warm it up. If charging does not restart when the temperature of the battery pack returns to normal, reinsert the battery pack.

EN

WARRANTY

EGO WARRANTY POLICY

Please visit the website egopowerplus.com for full terms and conditions of the EGO Warranty policy.

VEILIGHEIDSVOORSCHRIFTEN VOOR OPLADERS

LATURIN LED-TOIMINNOT

BA1400, BA2800, BA4200

SIKKERHET I ARBEIDSOMRÅDET

GENERELT VEDLIKEHOLD

BEZPIECZEŃSTWO W MIEJSCU PRACY

POLITYKA GWARANCYJNA EGO

SEZNAMTE SE S VAŠÍ NABÍJEČKOU (obr. A)

DÔLEŽITÉ BEZPEČNOSTNÉ POKYNY

CITIȚI MANUALUL DE INSTRUCTIUNI

ÎNCĂRCAREA UNUI SET DE ACUMULATORI CALD SAU RECE

CAURUMINI IERICES UZSTĂDĪŠANAI PIE SIENAS

LUGEGE KASUTUSJUHENDIT

LAADIJA OHUTUSREEGLID

OLULISED OHUTUSJUHISED

VAŽNA SIGURNOSNA UPUTSTVA

VAŽNA SIGURNOSNA UPUTSTVA

.הכלההוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָה

:תַרְשָׁ

Line drawing of a mechanical component with no visible text or symbols

CH3200E

320W μνοῦ HE

شاحن 320W攪 AR