Q: What to do if the projector lamp suddenly goes out?

If the LED source of your ULTIMEA Apollo P40 suddenly goes out or stops working, here are the points to check first: Overheating - The projector automatically cuts off the light source to protect itself. Check that the side ventilation ducts are not blocked and that the device has good air circulation (at least 30 cm of free space around it). Avoid placing the projector on a soft fabric or furniture that could obstruct the ventilation grilles. Regularly clean the filter with a can of compressed air. End of LED source life - The LED source of your projector has an estimated lifespan of 30,000 hours . If you have used the device intensively for several years, the LED may have reached its limit. In this case, technical intervention from the manufacturer or an authorized repair service will be necessary. Loss of input source - If your HDMI, Miracast (Android), AirPlay (iOS), AV, or USB connection is interrupted, the projector may automatically shut down. Check that your content source is still connected and active by using another cable or testing another source. Automatic standby mode - Some standby settings may turn off the light source after a period of inactivity. Check your device's setup menu by pressing the

Question 1

What to do if the projector lamp suddenly goes out?

Accepted Answer

If the LED source of your ULTIMEA Apollo P40 suddenly goes out or stops working, here are the points to check first:

Overheating - The projector automatically cuts off the light source to protect itself. Check that the side ventilation ducts are not blocked and that the device has good air circulation (at least 30 cm of free space around it). Avoid placing the projector on a soft fabric or furniture that could obstruct the ventilation grilles. Regularly clean the filter with a can of compressed air.
End of LED source life - The LED source of your projector has an estimated lifespan of 30,000 hours. If you have used the device intensively for several years, the LED may have reached its limit. In this case, technical intervention from the manufacturer or an authorized repair service will be necessary.
Loss of input source - If your HDMI, Miracast (Android), AirPlay (iOS), AV, or USB connection is interrupted, the projector may automatically shut down. Check that your content source is still connected and active by using another cable or testing another source.
Automatic standby mode - Some standby settings may turn off the light source after a period of inactivity. Check your device's setup menu by pressing the

Question 2

How to disable the startup tone on the ULTIMEA Poseidon D60 soundbar?

Accepted Answer

The ULTIMEA Poseidon D60 soundbar has a "Prompt Tone" feature that allows you to completely disable the startup tone. This tone includes all confirmation sounds (power on, power off, Bluetooth connection, etc.). Here’s how to disable it:

Method 1: Via the remote control

Press the "PROMPT TONE" button on the remote (look for this button among the audio controls)
Use the "-" button to lower the level
Set it to "PT0" (zero) to completely disable the tones
The change is immediate and saved automatically

Method 2: Via the ULTIMEA app

Download the ULTIMEA app on your phone (iOS or Android)
Connect your Poseidon D60 soundbar to the app
Go to Settings
Select "Prompt Sound"
Set to "NONE" to disable the startup tones

The ULTIMEA app offers more control and allows you to finely adjust the volume of the prompt tones if you only want to reduce them instead of completely disabling them. Either method will work according to your preference.

User manual ULTIMEA : user manuals and guides in PDF

Models ULTIMEA most viewed

Browse manuals ULTIMEA by appliance type

Recent questions about devices ULTIMEA