Q: The temperature adjustment buttons do not change anything

First, check that the freezer cooling is activated. On the Gladiator GAFZ30FDGB, you may have pressed the TEMP SETTING button too long and accidentally deactivated the system. To reactivate the cooling , press and hold the TEMP SETTING button for 3 seconds: the indicator lights on the control panel should turn on. If no lights appear, the cooling is deactivated, which is why nothing changes. You have three temperature settings available on this model. Briefly press TEMP SETTING (without holding) to switch from one setting to another: Soft Serve - slightly less cold, ideal for ice cream Assorted - standard setting recommended at about 0°F (-18°C) for regular freezing DeepFreeze - colder, for long-term storage If the cooling is indeed activated (visible lights) but the temperature does not change, wait at least 24 hours after changing the setting, as the compressor takes time to stabilize the temperature. Only make one change at a time and wait a full day before readjusting. Next, ensure that the ventilation grilles inside the freezer are not blocked by food or frost. Air must circulate freely for the cooling system to work properly. If any grilles are blocked, the appliance cannot maintain the temperature even if the buttons respond. Check that the freezer is properly plugged into a grounded 3-prong outlet, and that the electrical circuit has not tripped. The interior lights of the freezer should turn on when you open the door. If after these checks the buttons still do not allow you to change the temperature, or if the cooling does not activate, there may be a fault with the control panel or the control system. In this case, contact Gladiator service at 1-866-342-4089 (U.S.) or 1-800-807-6777 (Canada).

Question 1

The temperature adjustment buttons do not change anything

Accepted Answer

First, check that the freezer cooling is activated. On the Gladiator GAFZ30FDGB, you may have pressed the TEMP SETTING button too long and accidentally deactivated the system. To reactivate the cooling, press and hold the TEMP SETTING button for 3 seconds: the indicator lights on the control panel should turn on. If no lights appear, the cooling is deactivated, which is why nothing changes.

You have three temperature settings available on this model. Briefly press TEMP SETTING (without holding) to switch from one setting to another:

Soft Serve - slightly less cold, ideal for ice cream
Assorted - standard setting recommended at about 0°F (-18°C) for regular freezing
DeepFreeze - colder, for long-term storage

If the cooling is indeed activated (visible lights) but the temperature does not change, wait at least 24 hours after changing the setting, as the compressor takes time to stabilize the temperature. Only make one change at a time and wait a full day before readjusting.

Next, ensure that the ventilation grilles inside the freezer are not blocked by food or frost. Air must circulate freely for the cooling system to work properly. If any grilles are blocked, the appliance cannot maintain the temperature even if the buttons respond.

Check that the freezer is properly plugged into a grounded 3-prong outlet, and that the electrical circuit has not tripped. The interior lights of the freezer should turn on when you open the door.

If after these checks the buttons still do not allow you to change the temperature, or if the cooling does not activate, there may be a fault with the control panel or the control system. In this case, contact Gladiator service at 1-866-342-4089 (U.S.) or 1-800-807-6777 (Canada).

Question 2

How do I set the temperature of the Gladiator GAFZ30FDGB freezer?

Accepted Answer

To set the temperature of your Gladiator GAFZ30FDGB freezer, press the TEMP SETTING button located on the front top of the freezing compartment. This button allows you to toggle between three presets:

Soft Serve - for a slightly higher temperature ideal for serving ice cream
Assorted - standard versatile setting for frozen foods (approximately 0°F / -18°C)
DeepFreeze - the coldest setting for long-term storage

Important: Wait 24 hours after each adjustment to allow the temperature to stabilize properly before assessing the result.

User manual Gladiator : user manuals and guides in PDF

Models Gladiator most viewed

Browse manuals Gladiator by appliance type

Recent questions about devices Gladiator