User manual Fuxtec Pump : 14 free PDF user manuals

Q: What design or symbol indicates the 'WARM START' position on the starter lever?

The starter lever of the Fuxtec FXWP143 pump has two main positions: COLD START - initial position for the first ignition WARM START - position to be used after the engine has started The manual for your FXWP143 includes diagrams illustrating these two positions of the lever. On the lever itself, the positions are usually indicated by inscriptions or small engraved markers. However, the PDF of this manual does not specify the exact symbol or graphic design that appears on the physical lever. In practice, once the engine is started in the COLD START position, you simply need to toggle the lever forward or backward until you feel a click or find the other stable position. This is automatically the WARM START position. The important thing is to remember to make this change after starting, otherwise the engine may stop. If you cannot visually identify the two positions on your lever, observe the mechanism directly on your pump - the two positions are usually clearly defined and easy to distinguish by touch.

Q: What is the correct position of the starter lever to start the pump?

To start the FXWP143 pump, the starter lever must be placed in the "COLD START" position. Complete cold start procedure: Position the pump on a flat surface Turn on the ignition switch Place the starter lever on "COLD START" Press the priming pump 8 to 10 times until fuel flows into the line Pull the starting cord gently until you feel resistance Pull the cord in a quick, sharp motion Once the engine starts, immediately place the starter lever on "WARM START" Let the engine idle for about 10 minutes before use Important: Do not forget to switch the lever from "COLD START" to "WARM START" after the initial start, otherwise the engine may stall.