Q: How to set the HDG and TRK functions of the TCA Yoke Boeing Edition on Xbox?

The Thrustmaster TCA Yoke Boeing Edition features a physical HDG/TRK button (button 50) and a dedicated rotary slider for IAS/MACH, HDG/TRK, and ALT navigation functions. These physical controls of the yoke must be configured in your game’s control settings on Xbox, as the management of HDG (Heading) and TRK (Track) functions is done solely through the simulator's software configuration, not by the controller itself. To configure HDG and TRK on Xbox with Microsoft Flight Simulator , follow these steps: launch the game and go to the control settings menu. Look for the navigation commands related to Heading (HDG) and Track (TRK) . Assign these functions to the physical HDG/TRK button on the yoke or to the rotary navigation selector according to your preference and the type of input expected by the simulator. The yoke provides the physical controls, but it is your simulator that determines which functions are activated by each button or slider. Ensure that the Xbox/PC selector located at the base of the yoke is set to Xbox before use to ensure proper compatibility. If the HDG and TRK functions do not appear in your game’s control settings, check that your version of Microsoft Flight Simulator supports Flight Stick mode with the TCA Yoke Boeing Edition. Note that the exact availability of HDG and TRK functions may vary depending on your simulator version. Please refer to the official Thrustmaster support site for an up-to-date list of Xbox games compatible with the TCA Yoke Boeing Edition.

Question 1

How to speed up the return speed of the steering wheel to its center position?

Accepted Answer

The T128 manual does not specify a specific parameter to modify the return speed to the center position directly on the controller itself. This functionality primarily depends on the software or game you are using.

Here’s how to proceed:

Via Thrustmaster software: If you have installed the Thrustmaster configuration program for PC (Windows 10/11), check the force feedback and centering settings - you will generally find sliders to adjust the return speed of the steering wheel.
Via game settings: Most modern racing simulators (Gran Turismo, Forza, Assetto Corsa, etc.) offer spring effect or return to center speed settings in their device configuration menu.
Check the connection: Ensure that the T128 is properly connected via USB-C and that the T2PM pedals are plugged in via the RJ12 connector before initializing the game, as this affects the full calibration of the system.

If no settings appear in your software, consult the game documentation or contact Thrustmaster support with your exact model (T128).

Question 2

What should I do if my Thrustmaster TCA Yoke Boeing Edition is not working?

Accepted Answer

If your Thrustmaster TCA Yoke Boeing Edition is not working, here are several troubleshooting steps to follow to identify and resolve the issue:

1. Check the connections

Make sure the Yoke is properly connected to your computer or console via the USB cable.
Test another USB port to rule out a faulty port issue.

2. Restart the devices

Disconnect the Yoke, restart your computer or console, then reconnect the device.

3. Check software settings

In your flight simulator, check that the Yoke is detected and that the controls are assigned correctly.
If necessary, reset the control settings or reassign the controls.

4. Update firmware and drivers

On PC, download and install the latest version of the firmware and drivers available on the official Thrustmaster website.

5. Test on another device or simulator

Try connecting the Yoke to another computer or simulator to determine if the issue is with the device or the software.

6. Technical support

If the problem persists after these checks, contact Thrustmaster technical support for specialized assistance.

Question 3

Where can I find the user manual for the Thrustmaster TCA Yoke Boeing Edition controller?

Accepted Answer

The complete user manual for the Thrustmaster TCA Yoke Boeing Edition is available directly from the manufacturer. The official document can be found on the Thrustmaster support site, which is the most reliable and up-to-date source for this controller.

Access to the PDF manual: Go to https://support.thrustmaster.com, navigate to the Joysticks section, and then select TCA Yoke Boeing Edition. There you will find the complete user manual in PDF format in several languages, including French. This document details all aspects of the yoke: installation, configuration, use of the 18 programmable buttons, pitch tension adjustment, force feedback features, and compatibility with PC and Xbox.

Essential resources: On this same page, you can also access controller drivers and firmware updates necessary for optimal operation on your platform (PC or Xbox Series X|S/Xbox One). The T.A.R.G.E.T software is provided to program and customize the controls according to your preferences, including for the dual throttle axes, the 8-direction axis, and the 18 action buttons.

Getting started guide: A quick start guide may be included in the product packaging. However, the online manual remains the comprehensive resource for understanding all technical settings, such as adjusting the pitch tension spring at the base of the yoke (standard configuration 3 springs or 4 for maximum resistance) and installing additional peripherals (TCA throttle quadrant, TPR/TFRP rudder pedals).

Additional support: If you cannot find the answer to your question in the manual, check the FAQ and Support section at https://support.thrustmaster.com. There you will find advanced installation guides, solutions to common issues, and access to periodic software updates.

Question 4

How to reset all the controls of the Thrustmaster TCA Yoke Boeing Edition?

Accepted Answer

To reset all the controls of the Thrustmaster TCA Yoke Boeing Edition, you have two complementary methods: a hardware reset of the axes and a software reset of the control settings.

Hardware reset of the axes: This procedure resets the physical calibration of the yoke and must be performed with the yoke already connected. Press and hold the View and Menu buttons (located on the right side of the yoke) simultaneously, then connect the USB connector to the USB port of your PC or Xbox console while keeping the buttons pressed until the Xbox light flashes. Then release the buttons and press the Xbox button. You will then need to manually calibrate the six axes by moving them to their maximum amplitudes: the aileron wheel (clockwise and counterclockwise), the elevator stick (forward and backward), the horizontal and vertical mini-sticks, and the two throttle levers (up and down). Once all axes have been moved, press the Xbox button again to finalize the calibration.

Software reset in your simulator: You can also reset the control settings directly in your flight simulation software (Microsoft Flight Simulator, X-Plane, etc.). Access the control settings or device configuration of your simulator and look for the option Reset to default values or Restore factory settings for the yoke controls. This operation will restore the button and axis mappings to their initial values.

Profile management with T.A.R.G.E.T software: If you are using custom profiles created with the advanced programming software T.A.R.G.E.T (available for download at https://support.thrustmaster.com), you can load a default profile or create a new blank configuration. T.A.R.G.E.T allows you to manage multiple axis configurations and access profiles created by the Thrustmaster community.

Firmware update: To ensure that your yoke operates with the latest software version, check and update the firmware via the Thrustmaster support site (https://support.thrustmaster.com). Download the dedicated software from the TCA Yoke Boeing Edition product page and follow the instructions to update the firmware version stored in the base of the yoke. This step is recommended if you have encountered persistent malfunctions after the reset.

Question 5

Why doesn't button B19 on the Thrustmaster TCA Yoke Boeing Edition appear in the flight simulator command list?

Accepted Answer

The button B19 on the Thrustmaster TCA Yoke Boeing Edition may not appear in the flight simulator command list for several specific reasons. Here’s how to systematically resolve this issue.

Step 1: Check driver installation
Button B19 will never appear in the simulator if the official Thrustmaster drivers are not installed. Go to https://support.thrustmaster.com, select "Joysticks / TCA Yoke Boeing Edition", then download and install the complete "Drivers" package. This driver includes the Windows control interface and preconfigured profiles for Microsoft Flight Simulator 2020. Restart your PC after installation for the changes to take effect.

Step 2: Test button B19 detection
Before configuring the simulator, check that Windows recognizes your TCA Yoke and all its buttons. Press Windows+R, type joy.cpl and confirm. Select your TCA Yoke Boeing Edition and click on "Properties". In the test window, press button B19 to check if it is detected. If the button does not trigger any visible reaction, ensure that the switch at the back of the yoke is in the "PC" position and that the yoke is connected directly via USB (no hub or extension cable).

Step 3: Check simulator compatibility
Some simulators do not recognize all buttons on the TCA Yoke or do not automatically display them in the command list. Go to your simulator's control settings, select the TCA Yoke Boeing Edition, then look for the option to load all available controls or reset the settings to default values. In Microsoft Flight Simulator 2020, for example, Thrustmaster controls sometimes need to be explicitly assigned in the "Options > Control" menu.

Step 4: Update firmware
Firmware updates may add support for certain buttons or improve their detection. On https://support.thrustmaster.com, go to "Joysticks / TCA Yoke Boeing Edition" and check the "Firmware" section to see if an update is available. Download and install the latest version following the provided instructions.

Step 5: Use the Thrustmaster control panel
The driver installed in step 1 includes a dedicated control panel. You can create custom profiles, test all buttons individually, and merge the TCA Yoke with other compatible Thrustmaster devices (like the HOTAS Warthog or the T.16000M) to recognize them as a single USB device. Check this panel to ensure that button B19 is listed and responsive.

If after these checks button B19 still does not appear in your simulator, it is likely a specific limitation of the game. Some older simulators do not handle the full number of buttons on the TCA Yoke. In this case, consult your simulator's documentation or contact Thrustmaster technical support, who may offer compatible community profiles or other workarounds.

Question 6

How to set the HDG and TRK functions of the TCA Yoke Boeing Edition on Xbox?

Accepted Answer

The Thrustmaster TCA Yoke Boeing Edition features a physical HDG/TRK button (button 50) and a dedicated rotary slider for IAS/MACH, HDG/TRK, and ALT navigation functions. These physical controls of the yoke must be configured in your game’s control settings on Xbox, as the management of HDG (Heading) and TRK (Track) functions is done solely through the simulator's software configuration, not by the controller itself.

To configure HDG and TRK on Xbox with Microsoft Flight Simulator, follow these steps: launch the game and go to the control settings menu. Look for the navigation commands related to Heading (HDG) and Track (TRK). Assign these functions to the physical HDG/TRK button on the yoke or to the rotary navigation selector according to your preference and the type of input expected by the simulator.

The yoke provides the physical controls, but it is your simulator that determines which functions are activated by each button or slider. Ensure that the Xbox/PC selector located at the base of the yoke is set to Xbox before use to ensure proper compatibility. If the HDG and TRK functions do not appear in your game’s control settings, check that your version of Microsoft Flight Simulator supports Flight Stick mode with the TCA Yoke Boeing Edition.

Note that the exact availability of HDG and TRK functions may vary depending on your simulator version. Please refer to the official Thrustmaster support site for an up-to-date list of Xbox games compatible with the TCA Yoke Boeing Edition.

Question 7

How to adjust the altitude selector of the THRUSTMASTER TCA Yoke Boeing Edition on Xbox?

Accepted Answer

To adjust the altitude selector of your THRUSTMASTER TCA Yoke Boeing Edition when using it with an Xbox console, it is important to know that this configuration is generally done within the flight simulator itself, and not directly in the Xbox settings.

Steps to configure the altitude selector:

Launch your flight simulator on Xbox: Open the game or simulator (for example Microsoft Flight Simulator) on your console.
Access the control settings: In the main menu, look for the "Controls" or "Control Settings" section.
Find the altitude selector command: Browse the list of commands to find the one corresponding to altitude adjustment, often located in the "Instruments" or "Avionics" categories.
Assign the command to the altitude selector: Select the command and assign it to the corresponding button or axis on your TCA Yoke Boeing Edition.
Save your changes: Save the settings before exiting the menu so that the configuration is taken into account.

Note that the interface and menu names may vary depending on the simulator used. This method allows for precise customization of the commands for an optimal flying experience with your THRUSTMASTER controller on Xbox.

Question 8

How to configure the buttons of the THRUSTMASTER TCA Yoke Boeing Edition controller on Xbox?

Accepted Answer

To configure the buttons of your THRUSTMASTER TCA Yoke Boeing Edition controller on Xbox, follow these simple steps:

1. Connect the controller to the Xbox

Make sure your TCA Yoke is properly connected to your Xbox console via USB or the compatible connection.

2. Access the console settings

From the home screen of your Xbox, open the Settings menu.

3. Customize the buttons

In Settings, select Accessibility.
Then choose Controllers to access the customization options.
Use the Button Mapping option to change the function of the buttons according to your preferences.

4. Save your settings

Once the configuration is complete, make sure to save your changes so they are taken into account during your gaming sessions.

This customization allows you to adapt the controller to your flying style and enhance your simulation experience on Xbox.

User manual THRUSTMASTER Controller : user manuals and guides in PDF

Models THRUSTMASTER Controller most viewed

Other categories THRUSTMASTER

Recent questions about Controller THRUSTMASTER