Q: How to enter height on the SECA 769 scale?

The SECA 769 scale does not have a built-in height measurer . Height must be entered manually by the user via the BMI function for the scale to calculate the body mass index. Here’s how to proceed: Press the FUNC button while the scale is off The LCD screen will display the last height you entered Use the up/down arrow keys to change the value in increments of 1 cm Press FUNC again to confirm your entry Your height must be measured separately (with a stadiometer, a measuring tape, or another scale with a height measurer), and then entered manually into the SECA 769 scale.

Q: What does the error code E10.12 mean on the SECA 704 scale?

The code E10.12 is not documented in the official manual for your SECA 704 scale. The complete list of error codes recognized by this model includes: Er:H:11 - Load too high or scale overloaded on a corner Er:H:12 - Scale powered on with too high a load Er:H:16 - Self-oscillations causing a shift, zero point undetermined Er:H:71 - Wireless transmission impossible, module disabled Er:H:72 - Wireless transmission impossible, no group configured bAtt - Batteries empty or low SE0P - Maximum capacity exceeded 1E9P - Ambient temperature outside the operating range (+10°C to +40°C) If your scale displays E10.12, it may be a variant of a code not covered by the standard documentation, an electronic failure, or a condition specific to your unit. We recommend contacting SECA customer service directly with this code for a precise explanation and an appropriate solution.

Question 1

How to enter height on the SECA 769 scale?

Accepted Answer

The SECA 769 scale does not have a built-in height measurer. Height must be entered manually by the user via the BMI function for the scale to calculate the body mass index.

Here’s how to proceed:

Press the FUNC button while the scale is off
The LCD screen will display the last height you entered
Use the up/down arrow keys to change the value in increments of 1 cm
Press FUNC again to confirm your entry

Your height must be measured separately (with a stadiometer, a measuring tape, or another scale with a height measurer), and then entered manually into the SECA 769 scale.

Question 2

The SECA 834 scale displays 8888 after changing the batteries - is this normal?

Accepted Answer

The display showing "8888" (or "88888") after a battery change is perfectly normal. This is a display test that is part of the automatic initialization sequence of your SECA 834 scale.

Normal startup sequence:

The "SECA" logo is displayed first
Then "8888" or "88888" (display test)
Then "0.0.0.0"
The scale automatically returns to zero and is ready to operate

No problem! Your scale is functioning normally after the battery change. Just wait for this sequence to finish automatically (a few seconds) and the device will be operational.

Question 3

What does the error code E10.12 mean on the SECA 704 scale?

Accepted Answer

The code E10.12 is not documented in the official manual for your SECA 704 scale. The complete list of error codes recognized by this model includes:

Er:H:11 - Load too high or scale overloaded on a corner
Er:H:12 - Scale powered on with too high a load
Er:H:16 - Self-oscillations causing a shift, zero point undetermined
Er:H:71 - Wireless transmission impossible, module disabled
Er:H:72 - Wireless transmission impossible, no group configured
bAtt - Batteries empty or low
SE0P - Maximum capacity exceeded
1E9P - Ambient temperature outside the operating range (+10°C to +40°C)

If your scale displays E10.12, it may be a variant of a code not covered by the standard documentation, an electronic failure, or a condition specific to your unit. We recommend contacting SECA customer service directly with this code for a precise explanation and an appropriate solution.

User manual SECA Scale : user manuals and guides in PDF

Models SECA Scale most viewed

Recent questions about Scale SECA