Q: How do I pair my JBL Tune 780NC with a new device?

Initial Pairing Turn on your headphones by pressing the power button for 2 seconds . The device will automatically enter pairing mode . On your phone or device, go to the Bluetooth settings and select “JBL Tune 780NC” from the list of available devices. Reactivating Pairing Mode If you want to pair the device with a new phone later: Turn off the headphones Press and hold the power button for 5 seconds until pairing mode is reactivated Multipoint Connection The JBL Tune 780NC supports multipoint connection : you can pair and use up to 2 devices simultaneously . You can activate this feature by pressing the dedicated button twice or through the JBL Headphones app.

Q: How to pair the JBL Vibe Buds 2 to Windows 11 if the earbuds do not show up in Bluetooth?

Possible issue: Your earbuds are paired with your iPhone and automatically reconnect to it, or they are not in pairing mode on your PC. Solutions to try in this order: Move your iPhone away: Place your phone in another room or turn off its Bluetooth. The JBL Vibe Buds 2 support multipoint connection (up to 2 devices) but may automatically reconnect to the iPhone. Completely reset the earbuds: Place them in the charging case and hold the back button for 5 seconds until the light flashes white (as indicated in the manual). This step is essential before a new pairing. Take the earbuds out of the case: They automatically enter pairing mode as soon as they are taken out of the case. On Windows 11: Go to Settings > Devices > Bluetooth & other devices > Add a device > Bluetooth, then wait for “JBL Vibe Buds 2” to appear at the top of the list. If it does not appear immediately, wait a few seconds. Update Bluetooth drivers: If none of these steps work, check with your PC manufacturer (Dell, Lenovo, HP, ASUS, etc.) for any available Bluetooth or Wireless driver updates. Important: The JBL Vibe Buds 2 feature Bluetooth 5.3 (A2DP V1.4 and HFP V1.8), ensuring good compatibility with Windows 11. If the problem persists after these steps, a complete reset should resolve the issue in most cases.

Q: Where can I find the complete manual in French?

The complete manual for the JBL Tune 780NC in French is available on this page. The manual consists of 34 pages and covers all aspects of the product. You can: Browse the manual directly in the PDF viewer above using the arrows or by entering a page number Download the PDF by clicking on the download button (usually located at the top right of the viewer) Zoom in to read technical details, diagrams, and step-by-step instructions Search for a specific term using Ctrl+F (or Cmd+F on Mac) to quickly locate information in the document The manual covers, among other things: activating active noise cancellation (ANC), Bluetooth pairing, the meaning of the LED indicators, technical specifications (690 mAh battery, up to 76 hours of battery life, 40mm driver), and many other usage details.

Q: How to turn on or start the JBL Endurance Peak 4?

The JBL Endurance Peak 4 turn on automatically as soon as you take them out of the charging case. There is no button to press - activation is instant and requires no additional action. Here are the steps: Remove the earbuds from the case - they will turn on immediately and enter automatic pairing mode. Enable Bluetooth on your phone and look for " JBL Endurance Peak 4 " in the list of available devices. Select the device to establish the connection. Your earbuds feature Bluetooth 5.4 and can connect to two devices simultaneously in multipoint mode. If the earbuds do not turn on, check that the battery is not empty - charge them in the case for a few hours.

Q: How to charge the JBL Endurance Peak 4 earbuds?

To charge your JBL Endurance Peak 4 , the procedure is simple: Charging the earbuds Insert the earbuds into the charging case - they will charge automatically. You will see a LED indicator light up to confirm that charging is in progress. Charging the case Connect the charging case to a USB power source using the provided USB-C cable. The case fully charges in about 2 hours . Technical specifications Required voltage: 5 V - 1 A (optimal power: 2.5 to 5 watts) Earbud battery: 58 mAh (lithium-ion) Case battery: 580 mAh (lithium-ion) - allows for multiple recharges of the earbuds Full charge time: 2 hours A LED indicator will let you know when the charging is complete. Your charging case offers several recharge cycles for your earbuds before it itself needs to be recharged.

Q: Can I use the JBL Endurance Peak 4 for swimming?

The JBL Endurance Peak 4 have an IP68 certification , making them fully waterproof and dustproof. According to the manual, they are designed to be used in the rain and during physical training without worry. However, the manual does not explicitly mention swimming as a recommended use. The IP68 rating ensures maximum protection against water and dust, but for specific use in a pool or saltwater, it is advisable to contact JBL support for confirmation. In practice, thanks to their IP68 waterproofing and FlexSoft hooks that keep them securely in place, the Endurance Peak 4 can technically be used in water, but JBL does not officially document this as a use case.

Question 1

How do I pair my JBL Tune 780NC with a new device?

Accepted Answer

Initial Pairing

Turn on your headphones by pressing the power button for 2 seconds. The device will automatically enter pairing mode.

On your phone or device, go to the Bluetooth settings and select “JBL Tune 780NC” from the list of available devices.

Reactivating Pairing Mode

If you want to pair the device with a new phone later:

Turn off the headphones
Press and hold the power button for 5 seconds until pairing mode is reactivated

Multipoint Connection

The JBL Tune 780NC supports multipoint connection: you can pair and use up to 2 devices simultaneously. You can activate this feature by pressing the dedicated button twice or through the JBL Headphones app.

Question 2

How to pair the JBL Vibe Buds 2 to Windows 11 if the earbuds do not show up in Bluetooth?

Accepted Answer

Possible issue: Your earbuds are paired with your iPhone and automatically reconnect to it, or they are not in pairing mode on your PC.

Solutions to try in this order:

Move your iPhone away: Place your phone in another room or turn off its Bluetooth. The JBL Vibe Buds 2 support multipoint connection (up to 2 devices) but may automatically reconnect to the iPhone.
Completely reset the earbuds: Place them in the charging case and hold the back button for 5 seconds until the light flashes white (as indicated in the manual). This step is essential before a new pairing.
Take the earbuds out of the case: They automatically enter pairing mode as soon as they are taken out of the case.
On Windows 11: Go to Settings > Devices > Bluetooth & other devices > Add a device > Bluetooth, then wait for “JBL Vibe Buds 2” to appear at the top of the list. If it does not appear immediately, wait a few seconds.
Update Bluetooth drivers: If none of these steps work, check with your PC manufacturer (Dell, Lenovo, HP, ASUS, etc.) for any available Bluetooth or Wireless driver updates.

Important: The JBL Vibe Buds 2 feature Bluetooth 5.3 (A2DP V1.4 and HFP V1.8), ensuring good compatibility with Windows 11. If the problem persists after these steps, a complete reset should resolve the issue in most cases.

Question 3

How to increase or decrease the volume and change music on the JBL Soundgear Clips?

Accepted Answer

On the JBL Soundgear Clips, volume and music control is done through touch gestures on the earbuds themselves. Here are the available commands:

Playback and Volume Control

Single tap - Play/Pause
Double tap - Customizable function via the app
Triple tap - Customizable function via the app
Press for 2 seconds - Activate voice assistant

The manual specifies that volume can be controlled by touch gestures, but it does not detail the specific movements to increase or decrease.

Advanced Customization via the JBL App

To access more precise controls, we recommend connecting your earbuds to the official JBL app. This will allow you to customize the gestures (for example, assign double tap for "Next Track" and triple tap for "Previous Track"), giving you better control over volume and music navigation.

Question 4

The JBL Endurance Peak 4 do not appear in the list of available Bluetooth devices, how do I pair them?

Accepted Answer

If your JBL Endurance Peak 4 earbuds do not appear in your phone's Bluetooth list, here are the steps to follow:

Basic Checks

Make sure Bluetooth is enabled on your phone
Check that the earbuds are properly removed from the charging case - they automatically turn on and enter pairing mode when taken out of the case
Wait a few seconds for the earbuds to appear in the list

Reset the Earbuds

If the earbuds still do not appear, perform a complete reset:

Quickly press 2 times on one earbud
Then press firmly for 5 seconds until the LED indicator flashes
This action resets the earbuds to factory settings and automatically puts them back in pairing mode
Then try to select them from the Bluetooth list

Charging the earbuds

Insert the earbuds into the charging case - they will charge automatically. You will see a LED indicator light up to confirm that charging is in progress.

Charging the case

Connect the charging case to a USB power source using the provided USB-C cable. The case fully charges in about 2 hours.

Technical specifications

Required voltage: 5 V - 1 A (optimal power: 2.5 to 5 watts)
Earbud battery: 58 mAh (lithium-ion)
Case battery: 580 mAh (lithium-ion) - allows for multiple recharges of the earbuds
Full charge time: 2 hours

A LED indicator will let you know when the charging is complete. Your charging case offers several recharge cycles for your earbuds before it itself needs to be recharged.

Question 8

Do the JBL Endurance Peak 4 have an auto-pause function when removed?

Accepted Answer

According to the official manual of the JBL Endurance Peak 4, this auto-pause function is not documented. The manual describes the touch controls (single press for play-pause, double press for next track), but does not mention an automatic removal detection sensor.

Many modern earbuds feature this functionality, but the JBL Endurance Peak 4 focus on other technologies:

Manual touch controls for play-pause
Active noise cancellation (ANC) enabled by default
Multipoint connectivity for up to two devices
VoiceAware technology

If you want an automatic pause, you will need to use the manual touch controls (a single press) or check with JBL if a firmware update or a setting in the JBL Headphones app could enable this feature.

Question 9

Is there a maximum duration for using the JBL Endurance Peak 4 underwater?

Accepted Answer

The JBL Endurance Peak 4 do not have a specified maximum duration for underwater use.

These earbuds have an IP68 certification, which guarantees complete resistance to water and dust. However, this certification does not define a time limit for immersion, maximum depth, or allowable water temperature.

The official manual recommends use in the rain or during workouts, but does not explicitly mention prolonged swimming or intentional immersion. In practice, with an IP68 protection, the earbuds can tolerate continuous exposure to water, but we recommend rinsing them with fresh water after prolonged exposure to saltwater (pool, sea) and allowing them to dry completely before recharging.

Question 10

Can I use the JBL Endurance Peak 4 for swimming?

Accepted Answer

The JBL Endurance Peak 4 have an IP68 certification, making them fully waterproof and dustproof. According to the manual, they are designed to be used in the rain and during physical training without worry.

However, the manual does not explicitly mention swimming as a recommended use. The IP68 rating ensures maximum protection against water and dust, but for specific use in a pool or saltwater, it is advisable to contact JBL support for confirmation.

In practice, thanks to their IP68 waterproofing and FlexSoft hooks that keep them securely in place, the Endurance Peak 4 can technically be used in water, but JBL does not officially document this as a use case.

User manual JBL Earphones : user manuals and guides in PDF

Models JBL Earphones most viewed

Other categories JBL

Recent questions about Earphones JBL