JBL Endurance Peak 4 - Earphones

Endurance Peak 4 - Earphones JBL - Free user manual and instructions

Find the device manual for free Endurance Peak 4 JBL in PDF.

📄 36 pages English EN Download 💬 AI Question 15 questions ⚙️ Specs
Notice JBL Endurance Peak 4 - page 16
View the manual : Français FR English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeTrue wireless in-ear headphones
BrandJBL
ModelEndurance Peak 4
Speaker10 mm dynamic
Bluetooth Version5.4
Music Playback Time (ANC off)Up to 12 hours
Music Playback Time (ANC on)Up to 8 hours
Talk Time (ANC off)Up to 6 hours
Talk Time (ANC on)Up to 5 hours
Charging Time2 hours
Earbud Battery Capacity58 mAh (Li-ion)
Charging Case Battery Capacity580 mAh (Li-ion)
Earbud Weight10.5 g each (21 g total)
Charging Case Weight80.5 g
Protection RatingIP68 (water and dust resistant)
Frequency Response20 Hz - 20 kHz
Impedance16 ohms
Sensitivity108 dB SPL at 1 kHz
Maximum SPL95 dB
Microphone Sensitivity-38 dBV/Pa at 1 kHz
Multipoint ConnectivityUp to 2 devices
Key FeaturesTouch control, VoiceAware, active noise cancellation (ANC), JBL Headphones app
Power Supply5 V — 1 A
Max Operating Temperature45 °C

Frequently Asked Questions - Endurance Peak 4 JBL

How to properly wear the JBL Endurance Peak 4 earbuds?
For an optimal fit, mix and match the provided ear tips and hooks. Insert the earbud into the ear and twist slightly to ensure a secure fit. The FlexSoft hooks guarantee a comfortable hold during sports.
How to turn on and connect the earbuds to my phone?
Take the earbuds out of the charging case: they will turn on automatically and enter pairing mode. On your phone, enable Bluetooth and select "JBL Endurance Peak 4" from the list of devices.
What is the battery life?
With active noise cancellation (ANC) off, music playback time reaches 12 hours. With ANC on, it is 8 hours. The case provides an additional charge.
How to recharge the case and earbuds?
Place the earbuds in the charging case; they will recharge automatically. Recharge the case using a USB-C cable with a 5 V — 1 A power supply. Full charging time is 2 hours.
Are the earbuds waterproof?
Yes, they have an IP68 certification, making them water and dust resistant. You can use them in the rain or during workouts without worry.
How to use the active noise cancellation (ANC) feature?
ANC is enabled by default. You can control it via the JBL Headphones app. On the earbuds, a long press of 5 seconds allows switching between modes.
Can I connect the earbuds to two devices simultaneously?
Yes, the earbuds support multipoint connection up to two devices. This allows you to switch from your phone to your tablet without disconnecting.
How to reset the earbuds to factory settings?
Double-tap the earbud quickly, then long press (5 seconds) until the indicator flashes. The earbuds will be reset and ready to pair again.
What to do if one earbud does not work?
First check that the earbud is charged. Try putting it back in the case and taking it out again. If the problem persists, perform a factory reset or contact JBL support.
How to control music and calls?
Use touch controls: single tap for play/pause or answer a call, double tap for next track, triple tap for previous track. A long press of 3 seconds activates VoiceAware or the voice assistant.

User questions about Endurance Peak 4 JBL

5 questions about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

How to turn on or start the JBL Endurance Peak 4?
Frequently Asked Questions - 2 d
Response Notice-Facile

The JBL Endurance Peak 4 turn on automatically as soon as you take them out of the charging case. There is no button to press - activation is instant and requires no additional action.

Here are the steps:

  • Remove the earbuds from the case - they will turn on immediately and enter automatic pairing mode.
  • Enable Bluetooth on your phone and look for "JBL Endurance Peak 4" in the list of available devices.
  • Select the device to establish the connection.

Your earbuds feature Bluetooth 5.4 and can connect to two devices simultaneously in multipoint mode. If the earbuds do not turn on, check that the battery is not empty - charge them in the case for a few hours.

Respond (be the first)
How to charge the JBL Endurance Peak 4 earbuds?
Frequently Asked Questions - 9 d
Response Notice-Facile

To charge your JBL Endurance Peak 4, the procedure is simple:

Charging the earbuds

Insert the earbuds into the charging case - they will charge automatically. You will see a LED indicator light up to confirm that charging is in progress.

Charging the case

Connect the charging case to a USB power source using the provided USB-C cable. The case fully charges in about 2 hours.

Technical specifications

  • Required voltage: 5 V - 1 A (optimal power: 2.5 to 5 watts)
  • Earbud battery: 58 mAh (lithium-ion)
  • Case battery: 580 mAh (lithium-ion) - allows for multiple recharges of the earbuds
  • Full charge time: 2 hours

A LED indicator will let you know when the charging is complete. Your charging case offers several recharge cycles for your earbuds before it itself needs to be recharged.

Respond (be the first)
Do the JBL Endurance Peak 4 have an auto-pause function when removed?
Frequently Asked Questions - 06/18/2026
Response Notice-Facile

According to the official manual of the JBL Endurance Peak 4, this auto-pause function is not documented. The manual describes the touch controls (single press for play-pause, double press for next track), but does not mention an automatic removal detection sensor.

Many modern earbuds feature this functionality, but the JBL Endurance Peak 4 focus on other technologies:

  • Manual touch controls for play-pause
  • Active noise cancellation (ANC) enabled by default
  • Multipoint connectivity for up to two devices
  • VoiceAware technology

If you want an automatic pause, you will need to use the manual touch controls (a single press) or check with JBL if a firmware update or a setting in the JBL Headphones app could enable this feature.

Respond (be the first)
Is there a maximum duration for using the JBL Endurance Peak 4 underwater?
Frequently Asked Questions - 05/29/2026
Response Notice-Facile

The JBL Endurance Peak 4 do not have a specified maximum duration for underwater use.

These earbuds have an IP68 certification, which guarantees complete resistance to water and dust. However, this certification does not define a time limit for immersion, maximum depth, or allowable water temperature.

The official manual recommends use in the rain or during workouts, but does not explicitly mention prolonged swimming or intentional immersion. In practice, with an IP68 protection, the earbuds can tolerate continuous exposure to water, but we recommend rinsing them with fresh water after prolonged exposure to saltwater (pool, sea) and allowing them to dry completely before recharging.

Respond (be the first)
Can I use the JBL Endurance Peak 4 for swimming?
Frequently Asked Questions - 05/29/2026
Response Notice-Facile

The JBL Endurance Peak 4 have an IP68 certification, making them fully waterproof and dustproof. According to the manual, they are designed to be used in the rain and during physical training without worry.

However, the manual does not explicitly mention swimming as a recommended use. The IP68 rating ensures maximum protection against water and dust, but for specific use in a pool or saltwater, it is advisable to contact JBL support for confirmation.

In practice, thanks to their IP68 waterproofing and FlexSoft hooks that keep them securely in place, the Endurance Peak 4 can technically be used in water, but JBL does not officially document this as a use case.

Respond (be the first)

Download the instructions for your Earphones in PDF format for free! Find your manual Endurance Peak 4 - JBL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Endurance Peak 4 by JBL.

USER MANUAL Endurance Peak 4 JBL

natural_image Black and white photo of a JBL-branded electronic device casing (no text or symbols visible)

JBL Endurance Peak 4 - 1

JBL Endurance Peak 4 - 2

JBL Endurance Peak 4 - 3
S/M/L

JBL Endurance Peak 4 - 4
L

JBL Endurance Peak 4 - 5
B

JBL Endurance Peak 4 - 6

APP

JBL Endurance Peak 4 - APP - 1

JBL

JBL Endurance Peak 4 - APP - 3

JBL HEADPHONES

JBL Endurance Peak 4 - JBL HEADPHONES - 1

GET IT ON Google Play

JBL Endurance Peak 4 - GET IT ON Google Play - 1

Download on the App Store

Get even more control and personalization of your listening experience with this free app.

QR code with central logo containing 'JBL' text and headphones icon

HOW TO WEAR

① Mix and match for a perfect fit and audio performance.

AR S/M/L

Diagram illustrating ear ear replacement process with labeled USB flash drive mechanism

FIRST TIME USE

JBL Endurance Peak 4 - FIRST TIME USE - 1

Diagram showing a device with two earbuds connected to an open VR headset, with a close-up of the device's internal components and a shopping cart icon.

POWER ON & CONNECT

JBL Endurance Peak 4 - POWER ON & CONNECT - 1

JBL Endurance Peak 4 - POWER ON & CONNECT - 2

flowchart
graph TD
    A["Bluetooth"] --> B{JBL Endurance Peak 4 Connected?}
    B -->|Choose "JBL Endurance Peak 4" to connect.| C["Android™"]
    C --> D["Connect"]
    D --> E["Microsoft Swift Pair"]
    F["ON"] --> G["Fast Pair"]
    H["New JBL ENDU Peak 4 found If this is your device, connect to it."] --> I["Connect Dismiss"]
    style A fill:#f9f,stroke:#333
    style F fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style I fill:#fcc,stroke:#333

DUAL CONNECT + SYNC

JBL Endurance Peak 4 - DUAL CONNECT + SYNC - 1

JBL Endurance Peak 4 - DUAL CONNECT + SYNC - 2

natural_image Black and white photo of a JBL-branded electronic device case (no text or symbols visible)

JBL Endurance Peak 4 - DUAL CONNECT + SYNC - 3

natural_image Two identical black-and-white illustrations of a wrist strap or grip device (no text or symbols visible)

L

R

Stereo mode Mono mode

JBL

JBL Endurance Peak 4 - DUAL CONNECT + SYNC - 5

L/R

MULTI-POINT CONNECTION

JBL Endurance Peak 4 - MULTI-POINT CONNECTION - 1

JBL Endurance Peak 4 - MULTI-POINT CONNECTION - 2

flowchart
graph LR
    A["ON"] --> B["L/R"]
    B --> C["+"]
    D["ON"] --> E["(Maximum 2 devices)"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    note right of B: L/R (L/R) is connected to the earpiece via dotted lines to the wireless device. Note left of B: Red line indicates 'Hold (5s) Tap × 1'

CONTROLS

JBL Endurance Peak 4 - CONTROLS - 1

ANC* ANC* Ambient Aware* TalkThru* L Bixby/Siri®/Others Bixby/Siri Tap × 3Tap × 2Tap × 1 Hold (2s) R ®/Others

* Enable advance controls by connecting your JBL ENDURANCE PEAK 4 to JBL Headphones app

VOICEAWARE

JBL Endurance Peak 4 - VOICEAWARE - 1

JBL Endurance Peak 4 - VOICEAWARE - 2

natural_image Side profile of a person wearing an ear with sound waves, showing motion and partial view (no text or symbols)

JBL Endurance Peak 4 Max Volume Limiter Powered sound level peak and audio level Call Sound Level Optimizer Sound Setting NATURAL Voice Setting NATURAL Voice Aware 1.5m 300 <100

POWER OFF

JBL Endurance Peak 4 - POWER OFF - 1

JBL

L+R ① Hold (3s) L/R Hold (3s)

FACTORY RESET

JBL Endurance Peak 4 - FACTORY RESET - 1

L/R Tap × 2 Hold (5s)

DO MORE WITH THE APP

JBL Endurance Peak 4 Sport Modes Cuather Wicking Swing Cuather Sunning Customs Sport Mises Antiseal Sound Control

Gestures Left Right Customized Gesture Newer Special Features Top Bottom Bottom Call Control

Equalizer BALL EXTRIBASE PASS RIOCK FUNK VOCAL JAZZ

JBL Endurance Peak 4 - DO MORE WITH THE APP - 4

JBL HEADPHONES

CHARGING

JBL Endurance Peak 4 - CHARGING - 1

EDUVRANTES 2H 2H

JBL 10MIN = 4H

Diagram showing two smartwatch enclosures with a red X mark and a prohibition symbol indicating no protection.

WATERPROOF & DUST-PROOF IP68

JBL Endurance Peak 4 - WATERPROOF &amp; DUST-PROOF IP68 - 1

JBL Endurance Peak 4 - WATERPROOF &amp; DUST-PROOF IP68 - 2

natural_image Diagram showing two mechanical components with water droplets, no text or symbols present

30 mins 0m 1.5 m

JBL Endurance Peak 4 - WATERPROOF &amp; DUST-PROOF IP68 - 4

flowchart
graph LR
    A["Initial Contact"] --> B["Second Contact"]
    B --> C["Final Discharge with Water Droplets"]

LED BEHAVIORS

JBL Endurance Peak 4 - LED BEHAVIORS - 1

JBL Endurance Peak 4 - LED BEHAVIORS - 2

JBL Endurance Peak 4 - LED BEHAVIORS - 3

JBL Endurance Peak 4 - LED BEHAVIORS - 4

BT connecting

JBL Endurance Peak 4 - LED BEHAVIORS - 5

JBL Endurance Peak 4 - LED BEHAVIORS - 6

BT connected

JBL Endurance Peak 4 - LED BEHAVIORS - 7

JBL Endurance Peak 4 - LED BEHAVIORS - 8

BT not connected

JBL Endurance Peak 4 - LED BEHAVIORS - 9

natural_image Abstract oval-shaped diagram with concentric layers and a central symbol (no text or labels)

JBL Endurance Peak 4 - LED BEHAVIORS - 10

natural_image Line drawing of a VR headset with two side panels and a handle (no text or symbols)

JBL Endurance Peak 4 - LED BEHAVIORS - 11

JBL Endurance Peak 4 - LED BEHAVIORS - 12

JBL Endurance Peak 4 - LED BEHAVIORS - 13

JBL Endurance Peak 4 - LED BEHAVIORS - 14

Low battery

JBL Endurance Peak 4 - LED BEHAVIORS - 15

JBL Endurance Peak 4 - LED BEHAVIORS - 16

JBL Endurance Peak 4 - LED BEHAVIORS - 17

JBL Endurance Peak 4 - LED BEHAVIORS - 18

Charging

JBL Endurance Peak 4 - LED BEHAVIORS - 19

JBL Endurance Peak 4 - LED BEHAVIORS - 20

JBL Endurance Peak 4 - LED BEHAVIORS - 21

JBL Endurance Peak 4 - LED BEHAVIORS - 22

Fully charged

TECH SPEC

Model: ENDURANCE PEAK 4

Driver size: 10 mm / 0.394" Dynamic Driver

Power supply: 5V

1A

Earbud: 10.5 g per pc (21 g combined) /

0.0231 lbs per pc (0.0462 lbs combined)

Charging case: 80.5 g / 0.1775 lbs

Earbud battery type: Lithium-ion battery (58 mAh / 3.85 V)

Charging case battery type: Lithium-ion battery (580 mAh / 3.85 V)

Charging time: 2 hrs from empty

Music playtime with BT on and

ANC off: Up to 12 hrs

Music playtime with BT on and

ANC on: Up to 8 hrs

Talk time with BT on and ANC off: Up to 6 hrs

Talk time with BT on and ANC on: Up to 5 hrs

Frequency response: 20 Hz - 20 kHz

Impedance: 16 ohm

Sensitivity: 108 dB SPL@1 kHz

Maximum SPL:

95 dB

Microphone sensitivity:

-38 dBV/Pa@1 kHz

Bluetooth version (Earbud):

5.4

Bluetooth profile version:

A2DP V1.4, AVRCP V1.6.3, HFP V1.9

Bluetooth transmitter frequency

range:

2.4 GHz - 2.4835 GHz

Bluetooth transmitter power:

< 10 dBm (EIRP)

Bluetooth transmitter modulation

GFSK, π/4-DQPSK, 8DPSK

(Earbud):

45°C

JBL Endurance Peak 4 - TECH SPEC - 1

JBL Endurance Peak 4 - TECH SPEC - 2

FRD

CONTENU DE LA BOÎTE APPLICATION

Ambient Aware (Perception de

l'environnement)*

TalkThru (Conversation)*

Bixby/Siri®/Autres

Toucher x 1 | Toucher x 2 |

Toucher x 3 | Appuyer (2 s)

Vælg "JBL Endurance Peak 4" for at

ANC (Aktives Noise-Cancelling)*

Ambient Aware

(Umgebungsbewusst)*

TalkThru*

Bixby/Siri*/Weitere

1 × tippen | 2 × tippen |

Valitse "JBL Endurance Peak 4"

LED-MERKKIVALON TOIMINNOT

Tocco × 1 | Tocco × 2 |

Kies "JBL Endurance Peak 4" om

verbinding te maken.

VRCP V1.6.3, HFP V1.9

2,4 GHz - 2,4835 GHz

< 10 dBm (EIRP)

[Non-Text]

GFSK, π/4-DQPSK, 8DPSK

45°C

NO

DETTE ER I ESKEN

APP

Tapp × 1 | Tapp × 2 |

Tapp × 3 | Hold (2 s)

* Aktiver avanserte

* Habilite controles

FLERPUNKTSANSLUTNING

Max 2 enheter

Bluetooth-profilens version: A2DP V1.4, AVRCP V1.6.3, HFP V1.9

Bluetooth-sändarens

AZDF V1.4, RYRCP V1.6.5, HFP V1.9

2.4 Гц - 2.4835 Гц

< 10 дБ/мВт (ЭИИМ)

[Non-Text]

GFSK, π/4-DQPSK, 8DPSK

ZH-CN

产品清单

App

一只0.0231lbs(一副0.0462lbs)

充电盒:80.5g/0.1775lbs

耳机电池类型:锂离子电池(58mAh/3.85V)

充电盒电池类型:锂离子电池(580mAh/3.85V)

充电时间:2小时(从空电量到充满)

开启蓝牙但关闭主动降噪

时的音乐播放时间: 长达12小时

开启蓝牙和主动降噪时的

音乐播放时间:长达8小时

开启蓝牙但关闭主动降噪

时的通话时间: 长达6小时

同时开启蓝牙和主动降噪时的通话时间:

每隻 0.0231 lbs (兩隻 0.0462 lbs)

充電盒:80.5 g/0.1775 lbs

KEGUNAAN LAIN APLIKASI

PENGISIAN DAYA

IP68 TAHAN AIR DAN TAHAN

DEBU

POLA LED

BT menyambungkan

BT tersambung

BT tidak tersambung

Daya baterai lemah

Mengisi daya

Daya terisi penuh

SPESIFIKASI TEKNIS

Model: ENDURANCE PEAK 4

Ukuran driver: Driver Dinamis 10 mm/0,394"

Catu daya: 5 V = 1 A

Earbud: 10,5 g per buah (total 21 g)/

0,0231 lbs per buah (total 0,0462 lbs)

Casing pengisi daya: 80,5 g/0,1775 lbs

Tipe baterai earbud: Baterai Lithium-ion (58 mAh/3,85 V)

Tipe baterai casing pengisi daya: Baterai Litium-ion (580 mAh/3,85 V)

A2DP V1.4、AVRCP V1.6.3、HFP V1.9

(No text)

2.4GHz~2.4835GHz

10dBm未満(EIRP)

GFSK、π/4-DQPSK、8DPSK

45°C

-

구성품

해당 무료 앱을 통해 청취

경험을 더욱 효과적으로

제머하고 개인화할 수

있습니다.

착용방법

완벽한 착용감과 오디오

성능을 위한 믹스 앤 매치.

처음사용

전원켜기&연결

기타

한쪽 0.0231lbs(양쪽 0.0462lbs)

A2DP V1.4, AVRCP V1.6.3, HFP V1.9

contents page contains no legible text.

ජිවිඩ්‍යාන්‍යාන්‍යා

"JBL Endurance Peak 4"

BT Fund ANC Fund Fund Fund

A2DP V1.4I AVRCP V1.6.3I HFP V1.9

2.4 GHz - 2.4835 GHz

< 10 dBm (EIRP)

"JBL Endurance Peak 4" اخرّ

To protect battery lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.

FR pour protéger la vie de la batterie, chargez-la complètement au moins une fois tous les 3 mois. La durée de vie de la batterie varie en fonction des modes d'utilisation et des conditions environnementales.
DA For at optimere batteriets levetid skal du oplade fuldt ud mindst en gang i kvartalet. Batteriets levetid afhænger af brugsmønstre og omgivelser.
DE Lade zum Schutz des Akkus diesen mindestens einmal alle 3 Monate vollständig auf. Die Akkulebensdauer kann aufgrund von Nutzungsverhalten und Umgebungsbedingungen variieren.
EL Για να προστατεύσετε τη διάρκεια ζωής της μπαταρίας, φορτίστε την πλήρως τουλάχιστον μία φορά κάθε 3 μήνες. Η ζωής της μπαταρίας ποικίλλει ανάλογα με τη χρήση και τις περιβαλλοντικές συνθήκες.
ES Para proteger la duración de la batería, cárgala completamente al menos una vez cada 3 meses. La duración de la batería depende de los patrones de uso y las condiciones ambientales.
FI Akun käyttöiän turvaamiseksi, lataa täyteen ainakin kerran 3 kuukauden välein. Akun käyttöikä vaihtelee käyttötapojen ja ympäristöolosuhteiden mukaan.

HU Az akkumulátor élettartamának védelme érdekében teljesen töltse fel 3 havonta legalább egyszer. Az akkumulátor élettartama a használattól, és a környezeti feltételektől függ.
IT Per preservare la durata della batteria, effettuare una carica completa almeno una volta ogni 3 mesi. La durata della batteria varia a seconda del tipo di utilizzo e delle condizioni ambientali.
NL Voor een optimale levensduur de batterij minstens om de 3 maanden volledig opladen. De levensduur van de batterij is afhankelijk van gebruikspatronen en omgevingscondities.
NO For å beskytte batteriets levetid må det lades helt opp minst én gang hver 3. måned. Batteriets levetid vil variere etter bruksmønster og omgivelsesforhold.
PL Aby zachować czas eksploatacji akumulatora, należy go ładować co najmniej raz na trzy miesiące. Żywotność akumulatora zależy od sposobu jego użycia i warunków otoczenia.
PT-BR Para garantir a durabilidade da bateria, carregue-a totalmente pelo menos uma vez a cada três meses. A vida útil da bateria depende dos padrões de uso e das condições do ambiente.
SV För att förbättra batteriets livslängd ska det laddas det fullt minst en gång var tredje månad. Batteriets livslängd varierar beroende på användning och miljöförhållanden.
TR Pil ömrünü uzatmak için en az 3 ayda bir tam olarak şarj edin. Pil ömrü kullanım şekline ve çevresel şartlara bağlı olarak değişiklik gösterebilir.
RU Чтобы продлить срок службы аккумулятора, полностью заряжайте его по меньшей мере раз в 3 месяца. Срок службы аккумулятора зависит от способов использования и условий окружающей среды.

The power delivered by the charger must be between min 2.5 Watts required by the radio equipment, and max 5 Watts in order to achieve the maximum charging speed.

DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS

JBL Endurance Peak 4 - To protect battery lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions. - 1

218-250639218-

JBL Endurance Peak 4 - To protect battery lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions. - 2

JBL Endurance Peak 4 - To protect battery lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions. - 3

The Bluetooth ^® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

Android and Google Play are trademarks of Google LLC

JBL Endurance Peak 4 - To protect battery lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions. - 4

JBL Endurance Peak 4 - To protect battery lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions. - 5

Product specifications and app screens are subject to change without notice. HP_JBL_ENDURANCE PEAK 4_Global_QSG_SOP_V7

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : JBL

Model : Endurance Peak 4

Category : Earphones