How to connect an external device to the ROLAND EP-880 digital piano?

Question

Accepted Answer

The ROLAND EP-880 digital piano offers several options for connecting external devices, such as speakers, a computer, or other instruments. Here’s how to proceed:

Identify the connection ports

Locate the audio outputs located at the back or on the sides of the piano (1/4" jack or USB ports).
Also check for MIDI or USB inputs if you want to connect a computer or another compatible instrument.

Choose the appropriate cable

To connect external speakers, use a 1/4" (6.35 mm) stereo or mono jack cable depending on the available output.
For a connection to a computer, use a compatible USB cable (usually USB-B to USB-A).
For MIDI, use a standard MIDI cable if the piano and the device support it.

Proceed with the connection

Plug one end of the cable into the appropriate output of the piano.
Connect the other end to the external device (speaker, audio interface, computer, etc.).

Configure and test

Turn on the piano and the external device.
Adjust the volumes to a moderate level to avoid any distortion.
Play a few notes to check that the sound is correctly transmitted and audible through the external device.

This procedure will allow you to fully utilize the capabilities of your ROLAND EP-880 by integrating external audio equipment.

User manual ROLAND Digital piano : user manuals and guides in PDF

Models ROLAND Digital piano most viewed

Other categories ROLAND

Recent questions about Digital piano ROLAND