User manual CRIVIT Smartwatch : 15 free PDF user manuals

Q: How to display the running average on the CRIVIT 1LD4487 smartwatch?

To display the running average on your CRIVIT smartwatch model 1LD4487, follow these steps: 1. Turn on the watch Press the power button to turn on your watch if it is off. 2. Access the running mode In the main menu, select the application or mode dedicated to running or sports activity. 3. Start a running session Press "Start" or "Begin" to launch a new running session. 4. Display the running average During the run, the watch displays several real-time data, such as instant speed, distance covered, and elapsed time. To see the running average (average speed or pace), check the data screens by scrolling through the displayed information. If the running average does not appear automatically, go to the running data display settings and enable the corresponding option. 5. After the run Once the session is finished, you can view a detailed summary including the running average on the watch or via the connected app if your watch is synchronized. These steps will help you effectively track your running average and improve your sports performance.

Q: How to delete recorded trips on the CRIVIT IAN 275275 sports watch?

Your CRIVIT IAN 275275 sports watch records data in two main modes: stopwatch mode (lap times) and altimeter mode (recording altitudes). You can reset each of these data independently as needed. Delete recorded lap times (stopwatch mode): Press the MODE button until "CHRONO" appears on the display Press and hold the SET button (button 3) until the display shows "HOLD TO RESET" The timing and lap counter will be reset to zero You can record up to 99 laps; when the memory is full, the message "MEMORY FULL" appears Delete recorded altitude data (altimeter mode): Press the MODE button until "ALTI" appears on the display Press the SELECT button (button 2) to navigate between sub-functions (HIGH, LOW, UP, DOWN, HILL, RECORD) Once in the desired sub-function, press and hold the SET button (button 3) for about 3 seconds "HOLD TO RESET" briefly appears on the display, then the data for that function is reset to zero Repeat this operation for each function you wish to reset Note that the CRIVIT IAN 275275 is a basic sports watch: it records lap times on the stopwatch and altitude data, but does not perform full GPS route tracking. The "trips" correspond to the lap times recorded during your sports sessions. Once the data is reset, it cannot be recovered.

Models CRIVIT Smartwatch most viewed

User manual CRIVIT Smartwatch : user manuals and guides in PDF

Models CRIVIT Smartwatch most viewed

Other categories CRIVIT

Recent questions about Smartwatch CRIVIT