Question 1

How do I adjust the motor speed on the SABO 54-VARIO B?

Accepted Answer

The motor speed of the SABO 54-VARIO B cannot be freely adjusted by the user. The motor operates at a fixed speed of 2800 rpm, optimized at the factory for cutting performance.

The only control available is the motor control lever, which offers two positions:

Position "MAX" - The motor operates at its maximum efficiency and full speed. This is the normal position for mowing, ensuring optimal cutting quality.
Position "STOP" - Stops the motor.

Important: since the motor speed is directly linked to the blade speed, it is essential to keep the motor in the MAX position during mowing for a uniform and effective cut.

If you feel that the motor is running too slowly or not reaching its normal power, consult an authorized SABO service station for a professional diagnosis. Do not attempt to modify the speed yourself, as this could damage the device.

Question 2

What is the recommended torque for the blade of the SABO 47DRIVE?

Accepted Answer

The SABO 47DRIVE manual does not specify a numerical torque value (in Nm) for tightening the blade. However, the notice specifies that the blade fixing screw must always be tightened by an authorized SABO specialized workshop.

This requirement is critically important for safety: if the screw is tightened too much or too loosely, the coupling and the blade bar may be damaged or detach, which could lead to serious injuries.

To obtain the exact torque value, contact an authorized SABO specialized workshop. Only a professional with the appropriate tools and complete technical specifications can perform this operation safely.

User manual SABO Lawn mower : user manuals and guides in PDF

Models SABO Lawn mower most viewed

Other categories SABO

Recent questions about Lawn mower SABO