Where is the water filter located in the UFESA Sensazione machine?

Question

Accepted Answer

The water filter of the UFESA Sensazione machine is located at the connection of the removable water tank, at the base of the tank. This is the connection point at the bottom of the tank where water enters the coffee maker's circuit.

Filter installation: To install the filter, first rinse the new filter in a container of water. Then firmly insert it into the tank connection in a vertical position. The most important step is to ensure that the rubber seal is properly inserted into the connection at the bottom of the water tank; otherwise, the filter will not function correctly and you risk a leak.

Filter activation: Warning: the filter is factory disabled by default. To activate it, turn off the coffee maker, then touch the cleaning icon (h) for 3 to 5 seconds until it lights up with a short beep. Then press this icon: you should hear a long beep and see the indicator blink for 2 seconds, confirming that the filter is properly installed. If there is only a blink without a beep, the filter is not properly mounted.

Maintenance: Replace the filter every 2 months to maintain good filtration efficiency. A date indicator engraved on the filter allows you to note the month of the change. After installation, run a cup of hot water to rinse the water circuit before the first use of coffee.

Benefits of filtration: The water filter protects your machine from limescale, reduces heavy metals (copper, lead), eliminates harmful organic substances (pesticides, herbicides), and reduces unpleasant chlorine odors and tastes, while optimizing the coffee's aromas.

User manual UFESA Coffee machine : user manuals and guides in PDF

Models UFESA Coffee machine most viewed

Other categories UFESA

Recent questions about Coffee machine UFESA