i-SENSYS LBP325x - Printer CANON - Free user manual and instructions

USER MANUAL i-SENSYS LBP325x CANON

Please read "Important Safety Instructions" before operating this product. After you finish reading this guide, store it in a safe place for future reference. The information in this document is subject to change without notice.

https://oip.manual.canon

Quick Setup

Getting Started

Please read "Important Safety Instructions" before operating this product.

P.74

After you finish reading this guide, store it in a safe place for future reference.

The information in this document is subject to change without notice.

Mise en route

https://oip.manual.canon to read the User's Guide that describes all functions of this machine.

Toner cartridge (included with the machine)

Installing the Machineltems Included with

Before starting the installation

- Remove all of the tape.

Installation requirements

Provide a space of 100 mm or more around the machine.

433 mm 376 mm 95 mm 409 mm

390 mm 275 mm 55 mm Paper feeder (optional) 130 mm

1

Line drawing of a person using a printer to press or install a paper airplane (no text or symbols present)

4

Diagram illustrating a mechanical assembly process with labeled components and directional arrows indicating motion or movement.

2

Illustration of hands inserting a device into a folder with arrows indicating direction (no text or symbols)

5

Diagram of a device drawer with an arrow indicating direction (no text or symbols)

3

A4/A5 B3 B6

6

Up to here

7

Illustration of hands inserting a device into a drawer (no text or symbols visible)

8
Install the paper feeder (optional).

Line drawing of a person holding an open computer case with internal components (no text or symbols)

Technical line drawing of an internal device housing with mounting brackets (no text or symbols)

Line drawing of a person handling a printer with a handle and internal components (no text or symbols)

Diagram of a printer with internal compartments and an open base, showing no text or symbols

Diagram of two stacked electronic devices with arrows indicating internal components (no text or symbols)

Illustration of a hand inserting a device into an open folder, with arrows indicating process flow (no text or symbols)

Back side

graph TD
    A["Start"] --> B["Step 1: Box with buttons"]
    B --> C["Step 2: Button 1 to box"]
    C --> D["Step 3: Button 2 to box"]
    D --> E["Step 4: Button 2 to box"]
    E --> F["Step 5: Button 1 to box"]
    F --> G["Next: Process to config machine"]
    style A fill:#f9f,stroke:#333
    style G fill:#bbf,stroke:#333

Configuring the Initial Settings of the Machine

NOTE

Parts and functions of the operation panel.

P.70 "Start the Operation from the Operation Panel"

1.

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

1. Configure the initial settings, according to the screen.

2. Set the language and current date/time.

3. Set the USB-Connected PC OS.
4. Configure the settings to prevent unauthorized access.
5. For the purpose of confirmation, enter the same PIN twice.

Configuring the Method of Connecting to a Computer

Before starting the configuration

• If the machine is connected to an unsecured network, your personal information might be leaked to a third party. Please be aware and careful of this.
• The machine does not come with a router. Please have one ready, if necessary.
→ User's Guide

To connect via wired LAN

Illustration of a desktop computer connected to a printer (no text or symbols present)

The machine does not come with a LAN cable. Please have one ready, if necessary.

1. Make sure that the computer is connected to a router properly.
2. Check the network settings on the computer.
3. Connect the LAN cable.

Diagram showing a device connected to a terminal block via cable, with an inset magnified view highlighting the cable connection (no text or symbols present)

• After connecting the cable, wait a few minutes (until the IP address is set automatically).

• If a static IP address has been set on the computer, set the machine's IP address manually.

• Install the driver and software.

P.9 "Installing the software"

Now you are finished with the configuration of the initial settings.

To connect via USB

Illustration of a computer monitor connected to a printer (no text or symbols present)

• The machine does not come with a USB cable. Please have one ready, if necessary.
• Make sure that the USB cable you use has the following mark.
- Do not connect the USB cable before installing the driver. If you did, disconnect the USB cable from the computer, close the dialog box, and then perform the following procedure from step 1.

1. Install the driver and software.

P.9 "Installing the software"

Now you are finished with the configuration of the initial settings.

Installing the software

• The procedure described here is only applicable when your computer runs on the Windows OS. For more details on the software installation procedure, see the driver's manual.
- For the installation when your computer runs on the macOS, see the driver's manual.
- Your machine may not come with the driver for the macOS, depending on the time of purchase. New drivers are uploaded to the Canon website, and you can download and use the latest one.

1.

Illustration of a CD or DVD disc being inserted into a computer tower (no text or symbols)

2.

Canon UFR IIPCL/PS Setup Installation Start Software Programs Start programs applied for configuring settings, etc. Welcome: Display manuals Exit

If the screen is not displayed properly, re-insert the CD-ROM/DVD-ROM or search for "D:\MInst.exe" on the Windows platform (This description assumes that "D:" is the CD-ROM/DVD-ROM drive name).

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing a device connected to a terminal block via cable, with no visible text or symbols.

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing a CD or DVD disc being inserted into a server unit (no text or symbols present)

2.

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a desktop computer setup with monitor, tower, and printer (no text or symbols)

Diagram showing a device connected to an electronic component via cable, with no visible text or symbols.

Illustration of a desktop computer connected to a printer (no text or symbols present)

Illustration of a CD or DVD drive system with an arrow pointing to the CD (no text or symbols present)

2.

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing a device connected to a terminal block via cable, with an inset magnified view highlighting the cable connection (no text or symbols present)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Illustration of a computer monitor and CD with an arrow pointing to a disc (no text or symbols)

2.

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing connection between a device and a terminal block, with a magnified inset highlighting the cable (no text or symbols present)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Illustration of a computer monitor with a CD inside, showing an arrow pointing to its disc (no text or symbols present)

2.

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing a device connected to an electronic component via a cable, with no visible text or symbols.

Illustration of a desktop computer connected to a printer (no text or symbols present)

Illustration of a computer tower with a CD inside, showing an arrow pointing to its disc (no text or symbols present)

2.

Canon Instal-lació de UFR 8001 400 Install local Install local Install programont Mota programen in excesses per configurir los optos, etc. Manuals Mota mode Suit

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing a device connected to an electronic component via cable, with no visible text or symbols.

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing a CD or DVD disc being inserted into a server tower (no text or symbols present)

2.

Canon UFR IIPCL/IPS konfiguration Installed Abnormal formation programak Operasi di teratistik konfiguration belar dve programi abastate ili. Oktalizuk Geldetekk Innovation ili. Eton

Pantaila behar bezala erakusten ez bada, instalatu CD-ROM/DVD-ROMa edo bilatu "D:\MInst.exe" Windows sisteman (Deskribapen honek CD-ROM/DVD-ROM unitateren hizkia "D:" dela suposatzen du).

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a computer connected via serial and folder links (no text or symbols)

Diagram showing a device connected to a terminal block via cable, with an inset close-up highlighting the cable connection (no text or symbols present)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Illustration of a CD or DVD drive system with an open disk and a server unit (no text or symbols)

2.

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing a device connected to an electronic component via cable, with no visible text or symbols.

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing a CD or DVD disc being inserted into a computer tower (no text or symbols present)

2.

Canon UFR IIPCL/IPS Setup Installation Start Software Programme Start programs acquired for modeling settings, etc. View Display Manual Exit

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing connection between an electronic device and a physical component with a close-up view of the cable (no text or symbols present)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Illustration of a CD or DVD drive with an arrow indicating disc transfer (no text or symbols present)

2.

Canon Opsatning af UFR -RCH-106 Installation Start softwareprogrammer Start programme: de l'envor af togetation af mbillinger iom Vrijvinger View opsetrages Ankla

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a computer setup with monitor, tower, and printer (no text or symbols)

Diagram showing connection between a device and a terminal block, with no visible text or symbols

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing a CD or DVD disc being inserted into a computer tower (no text or symbols present)

2.

Canon UFR IPCL/IPS installungen Installat Programme's studio Rumens versat programmio gestatt de vasilir op nur het configuellen op wertlagen, opvence! Handbackgen Rumens gelt e Handbackgen wert Abfallen

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a computer connected to a printer and a server (no text or symbols present)

Diagram showing connection between a device and a terminal block, with no visible text or symbols

• Vent i et par minutter etter at kabelen er koblet til (til IP-adressen er automatisk innstilt).

• Hvis det er angitt en statisk IP-adresse for datamaskinen, må maskinens IP-adresse stilles inn manuelt.

• Installer driver og programvare.

→ side 31 "Installere programvaren"

Illustration of a desktop computer connected to a printer (no text or symbols present)

Illustration of a computer monitor with a CD inside and an external CD or DVD unit (no text or symbols)

2.

Canon Installere UFR IPC®/4.06 Installering/ Installare p. Start programme Starter programme can leave for bootperforming or installing a key video. Hindaker View hindaker Add it

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a desktop computer setup with monitor, tower, and printer (no text or symbols)

Diagram showing connection between a device box and an electronic component with a close-up of its cable (no text or symbols present)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing a CD or DVD disc being inserted into a computer tower (no text or symbols present)

2.

Canon Inställning av UFR 80%+ (e) Installation! Starts program Starts program currently for at Montgomery instellinger av Handlocker Your keyboard Nexts

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing a device connected to an electronic component via cable, with no visible text or symbols.

Illustration of a desktop computer connected to a printer (no text or symbols present)

Illustration of a CD or DVD drive with an arrow pointing to the disc (no text or symbols present)

2.

Canon UFR II-, PCL- tai PS-tulcetinacuina avonpur Ascena Kärniskä upcnaat Kärniskä oemertika sjonate mõltöntesam tõltönted upcnaat Oppost Ningkä upcnaat Lapira

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing connection between a device box and a terminal block with cable (no text or symbols)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Illustration of a computer monitor with an open CD and a CD inside, showing a magnified view of the disc (no text or symbols)

2.

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing connection between a device and a terminal block, with no visible text or symbols

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing a CD or DVD disc being inserted into a computer tower (no text or symbols present)

2.

Canon UFR IWPCL/IPS Setup Start Software Programs Start programs required for configuration settings, etc. Display Methods Exit

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a desktop computer connected to a printer via a serial line (no text or symbols)

Diagram showing connection between a device and a terminal block, with no visible text or symbols

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing a CD or DVD disc being inserted into a computer tower (no text or symbols present)

2.

Canon UFR IIPCL/IPS Setup Installed Start Software Programs Start programs required for configuring settings, etc. Manual Display windows Exit

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

1. Konfigūruokite pradinius parametrus

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing a device connected to a terminal block via cable, with an inset close-up highlighting a connector detail (no text or symbols present)

Illustration of a desktop computer connected to a printer (no text or symbols present)

- Irenginys tiekiamas be USB kabelio. Prireikus, jj jsigykite.

Diagram showing a CD or DVD drive interacting with a computer tower (no text or symbols present)

2.

Canon UFR IIPCL/IPS Setup Start Software Programs Start programs acquired for configuring settings, etc. Window Display manuals Exit

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a computer connected via a serial line to a printer (no text or symbols present)

Diagram showing a device with a cable inserted into a terminal block, connected to a separate terminal block (no text or symbols present)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Illustration of a CD or DVD drive system with an arrow indicating disc direction (no text or symbols present)

2.

Canon UFR IIPCL/IPS Setup Start Software Programs Start programs acquired for configuring settings, etc. Viewset Display manuals Exit

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing a device connected to a terminal block via cable, with an inset close-up highlighting the cable connection (no text or symbols present)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing a CD or DVD disc being inserted into a computer tower (no text or symbols present)

2.

Canon UFR MPCL/PS — instate Instalange Unchanska programator Unchanska programaty wymogene de kabelgancuata celueller FI Polyclade Polyclade polyclade Transfer

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing a device connected to an electronic component via cable (no text or symbols present)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Illustration of a computer monitor and CD tower with an arrow indicating disk transfer (no text or symbols)

2.

Canon Instalace aplikace IPC 8001.06 Installace Search software programs Search program published per install program installed at Phology Sub<< Phology Name

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a desktop computer connected to a printer via a serial line (no text or symbols)

Diagram showing a device connected to a terminal block via cable, with an inset close-up highlighting the cable connection (no text or symbols present)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing a CD or DVD drive interacting with a computer tower (no text or symbols present)

2.

Canon UFR BPCL/IPS - inf@ptics Indicator Special softwood program Special on program panel or network request a post Private Activate on private UserID

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Naprava ni opremljena s kablom LAN, zato ga po potrebi zagotovite.

Diagram showing a device connected to a terminal block via cable, with an inset close-up highlighting the cable connection (no text or symbols present)

Illustration of a computer connected to a printer (no text or symbols present)

- Naprava ni opremljena s kablom USB, zato ga po potrebi zagotovite.

Diagram showing a CD or DVD disc being inserted into a computer tower (no text or symbols present)

2.

Canon UFR IIPCL/IPS Setup Installation Start Software Programs Start programs required for configuring settings, etc. Window Display mode(s) Exit

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

1. Konfigurirajte početne postavke u skladu sa zaslonom.

• Postavite jezik i trenutačni datum/vrijeme.
- Postavite OS osobnog računala povezan USBom.
- Konfigurirajte postavke za sprečavanje neovlaštenog pristupa.
Zbog potvrde dvaput unesite isti PIN.

Konfiguriranje načina povezivanja s računalom

Illustration of a computer setup with monitor, tower, and printer (no text or symbols)

Diagram showing a device connected to a terminal block via cable, with an inset magnified view highlighting the cable connection (no text or symbols present)

• Nakon što ste spojili kabel pričekajte par minuta (dok se adresa IP automatski postavi).

• Ako je na računalu postavljena statička IP adresa, ručno postavite IP adresu uređaja.

• Instalirajte upravljački program i softver.

Str.55 „Instaliranje softvera“

Illustration of a desktop computer connected to a printer (no text or symbols present)

Illustration of a computer monitor with a CD inside and a CD inside the case, showing an arrow pointing to its disc (no text or symbols present)

2.

Canon UFR IIPCL/PS Setup Installation Start Software Programs Start program applied for configuring settings, etc. Manual Display manuals Exit

Ako se zaslon ne prikazuje ispravno, ponovno umetnite CD-ROM/DVD-ROM ili potražite „D:\MInst.exe“ na sustavu Windows (U ovom se opisu „D:“ odnosi na pogon CD-ROM/DVD-ROM).

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing connection between a device and a terminal block, with no visible text or symbols

Illustration of a computer connected to a printer (no text or symbols present)

Illustration of a computer monitor with a CD inside and an external tower, showing a disc transfer (no text or symbols)

2.

Canon UFR IIPCL/IPS telephones Wireless Soft video media Abitikink smart语音器 id. scrologis program video Hi-Fi video Kuhiyuk song video

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing a device connected to an electronic component via cable, with no visible text or symbols.

Illustration of a computer monitor connected to a printer via a cable (no text or symbols)

Diagram showing a CD or DVD disc being inserted into a computer tower (no text or symbols present)

2.

Canon UFR IIPCL/IPS Setup Installation Start Software Programs Start program required for configuring settings, etc. Visuals Displays manuals. Exit

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a computer setup with monitor, tower, and printer (no text or symbols)

Diagram showing a device connected to an electronic component via cable, with no visible text or symbols.

Illustration of a computer monitor connected to a printer (no text or symbols present)

Diagram showing a CD or DVD disc being inserted into a computer tower (no text or symbols present)

2.

Canon UFR IIPCL/IPS Setup Installation Start Software Programs Start program required for configuring settings, etc. Visuals Displays manuals. Exit

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing connection between an electronic device and a physical component, with no visible text or symbols.

Illustration of a desktop computer connected to a printer (no text or symbols present)

Illustration of a computer monitor and CD tower with an arrow pointing to a disc (no text or symbols)

2.

Canon UFR IPCU/IPS Kundemums Kumuluri Vodom Programmimo/Daylist Ayaolo-kl. poplarilmok qin girdel olan programmole daylist Kumuluri Kumuluri granulara Cako

Illustration of a desktop computer connected to a printer (no text or symbols present)

Diagram showing connection between a device and a USB port, with no visible text or symbols

Line drawing of a printer with a magnified inset showing a close-up of the printer's screen (no text or symbols present)

Illustration of a computer monitor and CD tower with an arrow pointing to a disc (no text or symbols)

Illustration of a computer monitor connected to a file box via a cable (no text or symbols)

Illustration of a desktop computer connected to a printer via serial communication (no text or symbols)

Diagram showing a device connected to a terminal block via cable, with no visible text or symbols.

Line drawing of a printer with a magnified inset showing a power button (no text or symbols)

Diagram showing a computer monitor connected to a CD or DVD unit, with a magnified circular arrow indicating rotation (no text or symbols present)

Canon UFR IIPCL/IPS Setup Configuration Start Software Programs Start program setup and for computing settings, etc. Marketing Displays hardware Edit

Illustration of a desktop computer connected to a file box (no text or symbols)

Start the Operation from the Operation Panel

Machine

Operation Panel Display (screen) ([Energy Saver] key) OK ([Back] key) Numeric keys (*) ([Clear] key)

(#)

Navigating the menu

Item selection or moving the cursor among the menu items

Select an item with [▲] or [▼].

Press OK or [▶] to proceed to the next hierarchy.

Press 📋 or [◀] to return to the previous hierarchy.

Setting confirmation

Press OK.

Text input method

Changing entry mode

To change the entry mode, press

Entry mode Available text

Uppercase alphabetic letters and symbols

Lowercase alphabetic letters and symbols

<12>Numbers

Entering text, symbols, and numbers

Enter with the numeric keys or #

Moving the cursor (Entering a space)

Press [◀] or [▶], to move the cursor. To enter a space,

press # and press OK

Deleting characters

Press ▪Pressing and holding deletes all characters.

	Entry mode:	Entry mode:	Entry mode: <12>
1	(Not available) 1
2	ABC abc 2
3	DEF def	3
4	GHI	ghi	4
5	JKL	jkl	5
6	MNO	mno	6
7	PQRS	pqrs	7
8	TUV tuv	8
9	WXYZ	wxyz	9
0	(Not available) 0
#	(space) @ . / - _ ! ? & $ % # ( )[] {} <> * + = ", ;; ' ^ ' | \		(Not available)

Printing

1. Open the document to print, and select the print function of the application.
2. Select the printer driver for the machine, and select [Preferences] or [Properties].
3. Specify the paper size.
4. Specify the paper source and paper type.
5. Specify the print settings, as necessary.
6. Select [OK].
7. Select [Print] or [OK].

File Printing Professional Show Settings | Image Layout | Format | View Layout | Layout Project Export Export Type Export Size Export Type Main Page Size Page Layout 1 in 1 I insert Selected Weekly Printing spiked Printing Driving Connection Long Edge (Ext) Create Digital Broadcast Group Add... Delete... Edit... Browse... View... Language Settings(S) Browse Details Sign... Control Help

Useful print settings

■ 2-sided
■ Non 1
■ Booklet Printing

graph TD
    A["Document Image"] --> B["Review"]
    B --> C["Approval"]
    C --> D["Final Output"]
    style A fill:#f9f,stroke:#333
    style D fill:#bbf,stroke:#333

For details

"Help" on the printer driver

Loading in the Paper Drawer

1 Pull out the paper drawer.

2 A4/A5 A4/A5

3 Up to here

4 Insert the paper drawer into the machine.

If you load a different size or type of paper from the one before, make sure to change the settings.

5 Press □ and specify the size and type of paper, according to the screen.

Loading in the Multi-Purpose Tray

Illustration of hands using a tool to press or adjust a printer (no text or symbols visible)

2

3 Up to here

Line drawing of a printer or printer with a paper airplane being inserted (no text or symbols)

5 Press (1) and specify the size and type of paper, according to the screen.

The Machine Does Not Seem to Work

Check the following.

• Is the power turned ON?
  • Is the machine out of sleep mode?

If both the display and 📁 are not lit, press the power switch.

Diagram showing a printer with a close-up of its image and a power button, labeled in Chinese.

• Is the power cord connected correctly?

Diagram showing a printer with an attached cable and a close-up of its cable being inserted, with a magnified view highlighting the cable's connector.

If the problem persists, see the User's Guide.

Paper Jams Have Occurred

Clear the paper jams, according to the on-screen instructions.

Remove jammed paper. 1/4

Replacing the Toner Cartridge

Replace the toner cartridge, according to the on-screen instructions.

Remove toner cartridge 3/6

Model number of replacement toner cartridge

• Canon Cartridge 056 L
• Canon Cartridge 056
• Canon Cartridge 056 H

Appendix

Important Safety Instructions

This manual describes only warnings and cautions for the installation and the power supply. Be sure to read "Important Safety Instructions" described in the User's Guide also.

WARNING

Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To use the machine safely, always pay attention to these warnings.

CAUTION

Indicates a caution concerning operations that may lead to injury to persons if not performed correctly. To use the machine safely, always pay attention to these cautions.

IMPORTANT

Indicates operational requirements and restrictions. Be sure to read these items carefully to operate the machine correctly and avoid damage to the machine or properly.

Installation

To use this machine safely and comfortably, carefully read the following precautions and install the machine in an appropriate location.

WARNING

Do not install in a location that may result in a fire or electrical shock

• A location where the ventilation slots are blocked (too close to walls, beds, sofas, rugs, or similar objects)
  • A damp or dusty location
  • A location exposed to direct sunlight or outdoors
  • A location subject to high temperatures
  • A location exposed to open flames
• Near alcohol, paint thinners or other flammable substances

Other warnings

• Do not connect unapproved cables to this machine. Doing so may result in a fire or electrical shock.
• Do not place necklaces and other metal objects or containers filled with liquid on the machine. If foreign substances come in contact with electrical parts inside the machine, it may result in a fire or electrical shock.
• If any foreign substance falls into this machine, unplug the power plug from the AC power outlet and contact your local authorized Canon dealer.

CAUTION

Do not install in the following locations

The machine may drop or fall, resulting in injury.

• An unstable location

• A location exposed to vibrations

Other cautions

• When carrying this machine, follow the instructions in this manual, if carried improperly, it may fall, resulting in injury.
• When installing this machine, be careful not to get your hands caught between the machine and the floor or walls. Doing so may result in injury.

Avoid poorly ventilated locations

This machine generates a slight amount of ozone and other emissions during normal use. These emissions are not harmful to health. However, they may be noticeable during extended use or long production runs in poorly ventilated rooms. To maintain a comfortable working environment, it is recommended that the room where the machine operates be appropriately ventilated. Also avoid locations where people would be exposed to emissions from the machine.

Power Supply

A WARNING

• Use only a power supply that meets the specified voltage requirements. Failure to do so may result in a fire or electrical shock.
• The machine must be connected to a socket outlet with grounding connection by the provided power cord.
• Do not use power cords other than the one provided, as this may result in a fire or electrical shock.
• The provided power cord is intended for use with this machine. Do not connect the power cord to other devices.

• Do not modify, pull, forcibly bend, or perform any other act that may damage the power cord. Do not place heavy objects on the power cord. Damaging the power cord may result in a fire or electrical shock.

• Do not plug in or unplug the power plug with wet hands, as this may result in an electrical shock.

• Do not use extension cords or multi-plug power strips with the machine. Doing so may result in a fire or electrical shock.
• Do not wrap the power cord or tie it in a knot, as this may result in a fire or electrical shock.
• Insert the power plug completely into the AC power outlet. Failure to do so may result in a fire or electrical shock.
• Remove the power plug completely from the AC power outlet during a thunder storm. Failure to do so may result in a fire, electrical shock, or damage to the machine.
  • Make sure that the power supply for the machine is safe, and has a steady voltage.
• Keep the power cord away from a heat source; failure to do this may cause the power cord coating to melt, resulting in a fire or electrical shock.

Avoid the following situations:

If excessive stress is applied to the connection part of the power cord, it may damage the power cord or the wires inside the machine may disconnect. This could result in a fire.

- Connecting and disconnecting the power cord frequently.

• Tripping over the power cord.

- The power cord is bent near the connection part, and continuous stress is being applied to the power outlet or the connection part.

- Applying excessive force on the power plug.

CAUTION

Install this machine near the power outlet and leave sufficient space around the power plug so that it can be unplugged easily in an emergency.

Handling

CAUTION

Laser Safety

This product is confirmed as a Class 1 laser product in IFC60825-1:2014 and EN60825-1:2014.

CLASS 1 LASER PRODUCT

LASERKLASSE 1

APPAREL À LASFR DE CLASSE 1

APPARECCHIO LASER DI CLASSE 1

PRODUCTO LÁSER DE CLASE 1

APARELHO A LASER DE CLASSE 1

LUOKAN 1 LASER-TUOTE

LASERPRODUKT KLASS 1

The laser beam can be harmful to human bodies. Since radiation omitted inside the product is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation. Read the following remarks and instructions for safety. - Never open covers other than those instructed in the manuals for this machine. - If the laser beam should escape and enter your eyes, exposure may cause damage to your eyes. - Use of controls, adjustments, or performance of procedures other than those specified in this manual may result in hazardous radiation exposure.

Laser Safety Caution

Safety-Related Symbols

Power switch: "ON" position
Power switch: "OFF" position
Power switch: "STAND-BY" position
① Push-push switch "ON" "OFF"
Protective earthing terminal
Dangerous voltage inside. Do not open covers other than instructed.
CAUTION: Hot surface. Do not touch.
Class II equipment
Moving parts: Keep body parts away from moving parts

CAUTION: An electrical shock may occur. Remove all the power plugs from the power outlet.
There are sharp edges. Keep body parts away from sharp edges.

[NOTE]

Some of symbols shown above may not be affixed depending on the product.

Consumables

A WARNING

Do not dispose of used toner cartridges in open flames. Also, do not store toner cartridges or paper in a location exposed to open flames. This may cause the toner or paper to ignite, and result in burns or fire.

Notice

Product Name

Safety regulations require the product's name to be registered.

In some regions where this product is sold, the following name(s) in parentheses () may be registered instead.

LBP325x(F176300)

EMC requirements of EC Directive

This equipment conforms with the essential EMC requirements of EC Directive. We declare that this product conforms with the EMC requirements of EC Directive at nominal mains input 230 V, 50 Hz although the rated input of the product is 220 to 240 V, 50/60 Hz. Use of shielded cable is necessary to comply with the technical EMC requirements of EC Directive.

EU WEEE and Battery Directives

You can see the WEEE and Battery Directives information in the latest User's Guide (HTML manual) from the Canon website (https://oip.manual.canon).

Disclaimers

• The information in this document is subject to change without notice.
• CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR IMPLIED; EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OF USE, OR NON-INFRINGEMENT. CANON INC. SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM THE USE OF THIS MATERIAL.

Trademarks

Mac is a trademark of Apple Inc. Microsoft, Windows, Windows Vista, Windows Server, Internet Explorer, Excel, and PowerPoint are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Other product and company names herein may be the trademarks of their respective owners.

Third Party Software

This Canon product (the "PRODUCT") includes third-party software modules. Use and distribution of these software modules, including any updates of such software modules (collectively, the "SOFTWARE") are subject to license conditions (1) through (9) below.

(1) You agree that you will comply with any applicable export control laws, restrictions or regulations of the countries involved in the event that this PRODUCT including the SOFTWARE is shipped, transferred or exported into any country.

(2) Rights holders of the SOFTWARE retain in all respects the title, ownership and intellectual property rights in and to the SOFTWARE. Except as expressly provided herein, no license or right, expressed or implied, is hereby conveyed or granted by rights holders of the SOFTWARE to you for any intellectual property of rights holders of the SOFTWARE.
(3) You may use the SOFTWARE solely for use with the PRODUCT.
(4) You may not assign, sublicense, market, distribute, or transfer the SOFTWARE to any third party without prior written consent of rights holders of the SOFTWARE.
(5) Notwithstanding the foregoing, you may transfer the SOFTWARE only when (a) you assign all of your rights to the PRODUCT and all rights and obligations under the license conditions to transferee and (b) such transferee agrees to be bound by all these conditions.
(6) You may not decompile, reverse engineer, disassemble or otherwise reduce the code of the SOFTWARE to human readable form.
(7) You may not modify, adapt, translate, rent, lease or loan the SOFTWARE or create derivative works based on the SOFTWARE.
(8) You are not entitled to remove or make separate copies of the SOFTWARE from the PRODUCT.
(9) The human-readable portion (the source code) of the SOFTWARE is not licensed to you.

Notwithstanding (1) through (9) above, the PRODUCT includes third-party software modules accompanying the other license conditions, and these software modules are subject to the other license conditions.

Please refer to the other license conditions of third-party software modules described in Appendix of Manual for the corresponding the PRODUCT. This Manual is available at https://oip.manual.canon/.

By using the PRODUCT, you shall be deemed to have agreed to all applicable license conditions. If you do not agree to these license conditions, please contact your service representative.

V_181009

Format to be done Configuration page Units Representation paper Quality Form Format and offset Apply... Format to select Apply Format to project: 800 Format to insert(C) Open as format design New project: 1 or 1 Improve items into view by format type: Improve items into view Emphasize adjustments: Setting (using) Select Operator Description Group OK Cancel Help

Illustration of hands using a tool to adjust or install a printer (no text or symbols visible)

2

Line drawing of a printer or printer with an open lid and internal components, no text or symbols present

Diagram showing a printer with a close-up of its image and a power button, both labeled in Chinese.

Diagram showing a printer with an attached cable and a close-up of its cable, highlighting the cable's position at the bottom.

Retirer cart. toner 3/6

CLASS 1 LASER PRODUCT

LASERKLASSE

APPAREL À LASER DE CLASSE 1

APPARFCCHIO LASER DI CLASSE 1

PRODUCTO I ASFR DE CLASE

APARELHO A LASER DE CLASSE 1

LUOKAN 1 LASER TUOTE

LASERPRODUKT KLASS

File Edit View Options Set to Edit View Insertion Sort: Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export Export

Nützliche

Druckeinstellungen

2 A4/A5 A4 11

3 Bis hierhin

Illustration of hands using a tool to adjust or install a printer (no text or symbols visible)

2

3 Bis hierhin

Line drawing of a printer with an open door and internal components, labeled with number 4 (no text or symbols on the diagram itself)

Diagram showing a printer with a close-up of its image and a power button, labeled in Chinese.

Diagram showing a printer with an attached cable and a close-up of its cable, highlighting the cable's position at the bottom.

CLASS 1 LASER PRODUCT

LASER KLASSE 1

APPAREIL À LASER DE CLASSE 1

APPARECCHIO LASER DI CLASSE 1

PRODUCTO LÁSER DE CLASE

APARELHO A LASER DE CLASSE 1

LUOKAN 1 LASER-TUOTE

LASERPRODUKT KLASS

Technical diagram showing mechanical assembly with magnified views and component labels

3 Fino qui

Illustration of hands using a tool to adjust or install a printer (no text or symbols visible)

2

3 Fino qui

Line drawing of a printer or printer with an open lid and paper airplane, showing internal components (no text or symbols)

Diagram showing a printer with a close-up of its screen and a power button, labeled in Chinese.

Diagram showing a printer with an attached cable and a close-up of its cable being inserted, with a magnified view highlighting the cable's connection.

CLASS 1 LASER PRODUCT LASER KLASSE 1

APPARELL À LASER DE CLASSE 1 APPARECCHIO LASER DI CLASSE 1

PRODUCTO LÁSER DE CLASE 1

APARELHO A LASER DE CLASSE 1

LUOKAN 1 LASER-TUOTE

LASERPRODUKT KLASS 1

Illustration of hands using a tool to press or adjust a printer (no text or symbols visible)

2

Line drawing of a printer or printer with an open lid and internal components, no text or symbols present

Diagram showing a printer with a close-up of its image and a power button, labeled in Chinese.

Diagram showing a printer with a cable inserted into a device, highlighting the cable's connection to the front panel.

CLASS 1 LASER PRODUCT

LASERKLASSE 1

APPAREL À LASER DE CLASSE 1

APPARECCHIO LASER DI CLASSE 1

PRODUCTO LÁSER DE CLASE 1

APARELHO A LASER DE CLASSE 1

LUOKAN 1 LASER-TUOTE

LASERPRODUKT KLASS 1

① Interruptor push-push "N" "OF

File Edit Selection dialog Create New Document Configure the image Edit Organize the image Insert Delete New Document Add to the image (1) Add to the image (2) Add to the image (3) Add to the image (4) Add to the image (5) Add to the image (6) Add to the image (7) Add to the image (8) Add to the image (9) Add to the image (10) Add to the image (11) Add to the image (12) Add to the image (13) Add to the image (14) Add to the image (15) Add to the image (16) Add to the image (17) Add to the image (18) Add to the image (19) Add to the image (20) Add to the image (21) Add to the image (22) Add to the image (23) Add to the image (24) Add to the image (25) Add to the image (26) Add to the image (27) Add to the image (28) Add to the image (29) Add to the image (30) Add to the image (31) Add to the image (32) Add to the image (33) Add to the image (34) Add to the image (35) Add to the image (36) Add to the image (37) Add to the image (38) Add to the image (39) Add to the image (40) Add to the image (41) Add to the image (42) Add to the image (43) Add to the image (44) Add to the image (45) Add to the image (46) Add to the image (47) Add to the image (48) Add to the image (49) Add to the image (50) Add to the image (51) Add to the image (52) Add to the image (53) Add to the image (54) Add to the image (55) Add to the image (56) Add to the image (57) Add to the image (58) Add to the image (59) Add to the image (60) Add to the image (61) Add to the image (62) Add to the image (63) Add to the image (64) Add to the image (65) Add to the image (66) Add to the image (67) Add to the image (68) Add to the image (69) Add to the image (70) Add to the image (71) Add to the image (72) Add to the image (73) Add to the image (74) Add to the image (75) Add to the image (76) Add to the image (77) Add to the image (78) Add to the image (79) Add to the image (80) Add to the image (81) Add to the image (82) Add to the image (83) Add to the image (84) Add to the image (85) Add to the image (86) Add to the image (87) Add to the image (88) Add to the image (89) Add to the image (90) Add to the image (91) Add to the image (92) Add to the image (93) Add to the image (94) Add to the image (95) Add to the image (96) Add to the image (97) Add to the image (98) Add to the image (99) Add to the image (100)

Per obtenir details

"Ajuda" al controlador d'impressora

1 Extraieu el casset de paper.

2 A4/A5

3 Fins aquí

Illustration of hands using a tool to adjust or install a printer (no text or symbols visible)

2

3 Fins aquí

Line drawing of a printer or printer with an open lid and internal components, no text or symbols present

Diagram showing a printer with a close-up of its image and a power button, labeled in Chinese.

Diagram showing a printer with a cable inserted into a device, highlighting the cable's connection to the front panel.

Remove jammed paper. 1/4

Remove toner cartridge 3/6

CLASS 1 LASER PRODUCT

LASERKLASSE1

APPARFIL À LASER DE CLASSE 1

APPARECCHIO LASER DI CLASSE 1

PRODUCTO LÁSER DE CLASE 1

APARELHO A LASER DE CLASSE 1

LUOKAN 1 LASER-TUOTE

LASERPRODUKT KLASS 1

Technical diagram showing mechanical assembly with magnified views and component labels

Honaino 3

4 Sartu paperaren tiradera makinan.

Illustration of hands using a tool to press or adjust a printer (no text or symbols visible)

2

3 Honaino

Line drawing of a printer or printer with an open lid and internal components, no text or symbols present

Diagram showing a printer with a close-up of its image and a power button, labeled in Chinese.

Diagram showing a printer with an attached cable and a close-up of its cable being inserted, with a magnified view highlighting the cable's connection.

Remove jammed paper. 1/4

Remove toner cartridge 3/6

CLASS 1 LASER PRODUCT

LASERKLASSE

APPAREL À LASER DE CLASSE 1 APPARECCHIO LASER DI CLASSE 1

PRODUCTO LASER DE CLASE

APARELHO A LASER DE CLASSE 1

LUOKAN 1 LASER TUOTE

LASERPRODUKT KLASS 1

Configuration file Configurations (image) AutoCADs (Text Document) (Catalog) File Configuration file Import Delete Help Format (image) Size Format (image) Cancere Format (image) Layer (image) 1 mm Importable as text files from the table in format Importable as text files Local to watermarking? Edit View (Image) Remove Input From Web Close Close: 100% Change: De Vertical Horizontal Deformation: normal Origin or Options Reference... Enter configuration Configuration file (default) Remove position OK Cancel Help

Illustration of hands using a tool to press or adjust a printer (no text or symbols visible)

2

Line drawing of a printer or printer with an open lid and internal components, no text or symbols present

Diagram showing a printer with a close-up of its image and a power button, labeled in Chinese.

Diagram showing a printer with an attached cable and a magnified view of the cable being inserted, with a labeled connector pointing to the cable.

Se o problema persistir, consulte o Manual do utilizador.

Remover cartucho toner 3/6

CLASS 1 LASFR PRODUCT LASFR KLASSE 1

APPAREIL À LASER DE CLASSE 1 APPARECCHIO LASER DI CLASSE 1 PRODUCTO LÁSER DE CLASE 1

APARELHO A LASER DE CLASSE 1 LUOKAN 1 LASER-TUOTE LASERPRODUKT KLASS 1

File Printing Professional Show Settings | Image Layout | Format | View Layout | Layout Project Export Export Type Export Size Export Type Main Page Size Page Layout 1 in 1 1 insert Selected Weekly Printing spiked Printing Driving Connection Long Edge (Ext) Create Digital Broadcast Group Add... Delete... Edit... Browse... View... Language Settings(S) Browse Details Sign... Control Help

Diagram showing a device with a magnified view of its internal components, including a labeled section A4 and directional arrows indicating movement or assembly.

Illustration of hands using a tool to adjust or install a printer (no text or symbols visible)

2

Line drawing of a printer or printer with an open lid and internal components, no text or symbols present

Diagram showing a printer with a close-up of its screen and a power button, labeled in Chinese.

Diagram showing a printer with an attached cable and a close-up of its cable, highlighting the cable's position at the bottom.

Remove jammed paper. 1/4

Remove toner cartridge 3/6

CLASS 1 LASER PRODUCT

LASERKLASSE

APPAREL À LASER DE CLASSE 1

APPARFCCHIO LASER DI CLASSE 1

PRODUCTO I ASFR DE CLASE

APARELHO A LASER DE CLASSE 1

LUOKAN 1 LASER TUOTE

LASERPRODUKT KLASS

Sub-Object: Object Sub-Object: Object Sub-Object: Object Sub-Object: Object Sub-Object: Object Sub-Object: Object Sub-Object: Object Sub-Object: Object Sub-Object: Object Sub-Object: Object Sub-Object: Object Sub-Object: Object Sub-Object: Object Sub-Object: Object Sub-Object: Object Sub-Object: Object Sub-Object: Object Sub-Object: Sub-Object: Sub-Object: Sub-Object: Sub-Object: Sub-Object: Sub-Object: Sub-Object: Sub-Object: Sub-Object: Sub-Object: Sub-Object: Sub-Object: Sub-Object: Sub-Object: Sub-Object: Sub-Object: Sub-Object: Sub-Object: Sub-Object: Sub-Object: Sub-Object: Sub-Object: Sub-Object: Sub-Object: Sub-Object:

Nyttige

Illustration of hands using a tool to adjust or install a printer edge (no text or symbols visible)

2

3 Op hertil

Line drawing of a printer or printer with an open lid and internal components, no text or symbols present

Diagram showing a printer with a close-up of its image and a power button, labeled in Chinese.

Diagram showing a printer with an attached cable and a close-up of its cable, highlighting the cable's connection to the printer's front panel.

Fjern tonerpatron 3/6

CLASS 1 LASER PRODUCT LASER KLASSE 1

APPAREL À LASER DE CLASSE 1 APPARECCHIO LASER DI CLASSE 1

PRODUCTO I ÁSFR DE CLASE 1

APARELHO A LASER DE CLASSE 1

LUOKAN 1 LASER TUOTE LASERPRODUKT KLASS 1

File Edit View Insertion Appendix: 2017 Appendix: 2017 Export: 2017 Export name: Size: 1 Export type: Export language: Export language: Export language: Export language: Export language: Export language: Export language: Export language: Export language: Export language: Export language: Export language: Export language: Export language: Export language: Export language: Export language: Export language: Export language: Export language: Export language: Export language: Export language: Export language: Export language: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: Export languages: export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language : Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / Export Language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language / export language | Export languages | Export languages | Export languages | Export languages | Export languages | Export languages | Export languages | Export languages | Export languages | Export languages | Export languages | Export languages | Export languages | Export languages | Export languages | Export languages | Export languages | Export languages | Export languages | Export languages | Export languages | Export languages | Export languages | Export languages | Export languages | Export languages | Export languages | Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages Export languages exported languages (import) exported languages (import) exported languages (import) exported languages (import) exported languages (import) exported languages (import) exported languages (import) exported languages (import) exported languages (import) exported languages (import) exported languages (import) exported languages (import) exported languages (import) exported languages (import) exported languages (import) exported languages (import) exported languages (import) exported languages (import) exported languages (import) exported languages (import) exported languages (import)

Illustration of hands using a tool to press or adjust a printer (no text or symbols visible)

2

3 Tot hier

Line drawing of a printer or printer with an open lid and arrow indicating process (no text or symbols)

Diagram showing a printer with a close-up of its image and a power button, with Chinese annotations indicating the process.

Diagram showing a printer with a cable inserted into a device, highlighting the cable's connection to the front panel.

CLASS 1 LASER PRODUCT

LASERKLASSE 1

APPAREL À LASER DE CLASSE 1

APPARECCHIO LASER DI CLASSE 1

PRODUCTO LÁSER DE CLASE 1

APARELHO A LASER DE CLASSE 1

LUOKAN 1 LASER-TUOTE

LASERPRODUKT KLASS 1

Technical diagram showing mechanical assembly with magnified views and component labels

3 Opp hit

4 Skyv papirskuffen inn i maskinen.

Illustration of hands using a tool to adjust or install a printer (no text or symbols visible)

2

3 Opp hit

Line drawing of a printer or printer with an open lid and internal components, no text or symbols present

Diagram showing a printer with a close-up of its image and a power button, labeled in Chinese.

Diagram showing a printer with a cable inserted into a device, highlighting the cable's connection to the left panel.

Se bruksanvisningen hvis problemet vedvarer.

CLASS | LASER PRODUCT

LASFR KI ASSE 1

APPARFIL À LASFR DE CLASSE 1

APPARECCHIO LASER DI CLASSE 1

PRODUCTO LÁSER DE CLASE 1

APARFIHO A LASER DE CLASSE 1

LUOKAN 1 LASER-TUOTE

LASERPRODUKT KI ASS 1

New document manager Source: Subject Edit pointing / Properties / Control Code: DocumentName Unemployment: Shift-U Default All New document (C) Before review Subject: Type 1 New document editing tool or browser Default user(s) Page to browsing Language (lower) Help before review Group Rename (S)... Delete (D) Edit (E) Finish (F) Help (H) End (I) Help (B) Help (N)

Technical diagram showing a mechanical assembly with labeled components and directional arrows indicating motion or assembly.

3 Upp till hit

Illustration of hands using a tool to press or adjust a printer (no text or symbols visible)

2

3 Upp till hit

Line drawing of a printer or printer with an open lid and internal components, no text or symbols present

Diagram showing a printer with a close-up of its image and a power button, with Chinese annotations indicating the process.

Diagram showing a printer with a cable inserted into a device, highlighting the cable's connection to the printer's front panel.

CLASS 1 LASER PRODUCT

LASER KI ASSE 1

APPAREIL À LASER DE CLASSE 1

APPARECCHIO LASER DI CLASSE 1

PRODUCTO LASER DE CLASE 1

APARELHO A LASER DE CLASSE 1

LUOKAN 1 LASER-TUOTE

LASERPRODUKT KLASS 1

Technical diagram showing a mechanical component being processed into a device, with magnified views highlighting internal components and directional arrows.

Illustration of hands using a tool to press or adjust a printer (no text or symbols visible)

2

Line drawing of a printer or printer with an open lid and internal components, no text or symbols present

Diagram showing a printer with a close-up of its image and a power button, with Chinese annotations indicating the process.

Diagram showing a printer with an attached cable and a close-up of its cable being inserted, with a magnified view highlighting the cable's connection.

CLASS | LASER PRODUCT

LASFR KI ASSE 1

APPARFIL À LASFR DE CLASSE 1

APPARECCHIO LASER DI CLASSE 1

PRODUCTO LÁSER DE CLASE

APARFIHO A LASER DE CLASSE 1

LUOKAN 1 LASFR-TUOTF

LASERPRODUKT KI ASS 1

Data import options Options: Importing to the Web Export: Export to Web Export to Web Export to Web Export to Web Export to Web Export to Web Export to Web Export to Web Export to Web Export to Web Export to Web Export to Web Export to Web Export to Web Export to Web Export to Web Export to Web Export to Web Export to Web Export to Web Export to Web Export to Web Export to Web Export to Web Export to Web Export to Web

Technical diagram showing mechanical assembly with magnified views and component labels

Illustration of hands using a tool to adjust or install a printer (no text or symbols visible)

2

Line drawing of a printer or printer with an open lid and internal components, no text or symbols present

Diagram showing a printer with a close-up of its image and a power button, both labeled in Chinese.

Diagram showing a printer with an attached cable and a close-up of its cable, highlighting the cable's connection to the printer's front panel.

CLASS 1 LASER PRODUCT LASER KLASSE 1

APPAREL À LASER DE CLASSE 1 APPARECCHIO LASER DI CLASSE 1

PRODUCTO I ÁSFR DE CLASE 1

APARELHO A LASER DE CLASSE 1

LUOKAN 1 LASER TUOTE LASERPRODUKT KLASS 1

File Printing Professional Show Settings | Image Layout | Format | View Layout | Layout Project Export Export Type Export Size Export Type Main Page Size Page Layout 1 in 1 I insert Selected Weekly Printing spiked Printing Driving Connection Long Edge (Ext) Create Digital Broadcast Group Add... Delete... Edit... Browse... View... Language Settings(S) Browse Details Sign... Control Help

Diagram showing mechanical assembly with magnified views and component labels, including a circular component labeled 'A4'

Illustration of hands using a tool to adjust or install a printer edge (no text or symbols visible)

2

Line drawing of a printer or printer with an open lid and internal components, no text or symbols present

Diagram showing a printer with a close-up of its image and a power button, both labeled in Chinese.

Diagram showing a printer with an attached cable and a magnified view of the cable being inserted, with a close-up detail highlighting the cable's connection.

Remove jammed paper. 1/4

Remove toner cartridge 3/6

CLASS 1 LASER PRODUCT

LASERKLASSE 1

APPAREL À LASER DE CLASSE 1

APPARECCHIO LASER DI CLASSE 1

PRODUCTO LASER DE CLASE 1

APARELHO A LASER DE CLASSE 1

LUOKAN 1 LASER-TUOTE

LASERPRODUKT KLASS 1

File Setting Data Setup - Page Layout - Drawing - Cross-Section - Edit Page Edit Print Print Size Size Layer Type Stack Picture Size Page Layout 1 in 1 Select Selected Visible Framing 2 Selected Framing Drawing Options Long Clips (Ext) Paste Color (Dim:0) Group AutoCAD Properties M Format Background Language Language Settings(S): Browse Details AutoCAD Delete... Save... Help

Diagram showing a device with labeled components and directional arrows, including a magnified view of the internal structure.

Illustration of hands using a tool to adjust or install a printer (no text or symbols visible)

2

3 Lidz šai atzimei

Line drawing of a printer or printer with an open lid and paper airplane, showing internal components (no text or symbols)

Diagram showing a printer with a close-up of its screen and a power switch, labeled in Chinese.

Diagram showing a printer with an attached cable and labeled connection point, including a magnified view of the cable's tip.

Remove jammed paper. 1/4

Remove toner cartridge 3/6

Mainas tonera kasetnu modelu numuri

• Canon Cartridge 056 L
• Canon Cartridge 056
• Canon Cartridge 056 H

Pielikums

Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To use the machine safely, always pay attention to these warnings.

UZMANIBU!

CLASS 1 LASER PRODUCT

LASERKLASSE 1

APPAREL À LASER DE CLASSE 1

APPARECCHIO LASER DI CLASSE 1

PRODUCTO LÁSER DE CLASE 1

APARELHO A LASER DE CLASSE 1

LUOKAN 1 LASER-TUOTE

LASERPRODUKT KLASS 1

File Printing Professional Show Settings | Image Layout | Format | View Layout | Layout Project Export Export Type Export Size Export Type Main Page Size Page Layout 1 in 1 1 insert Selected Weekly Printing spiked Printing Driving Connection Long Edge (Ext) Create Digital Broadcast Group Add... Delete... Edit... Browse... View... Language Settings(S) Browse Details Sign... Control Help

Illustration of hands using a tool to adjust or install a printer (no text or symbols visible)

2

Line drawing of a printer or printer with an open lid and internal components, no text or symbols present

Diagram showing a printer with a close-up of its image and a power button, both labeled in Chinese.

• Ar tinkamai prijungtas maitinimo laidas?

Diagram showing a printer with a cable inserted into a device, highlighting the cable's connection to the front panel.

Remove jammed paper. 1/4

Remove toner cartridge 3/6

CLASS 1 LASER PRODUCT

LASERKLASSE 1

APPAREL À LASER DE CLASSE 1

APPARECCHIO LASER DI CLASSE 1

PRODUCTO LÁSER DE CLASE 1

APARELHO A LASER DE CLASSE 1

LUOKAN 1 LASER-TUOTE

LASERPRODUKT KLASS 1

File Setting Data Setup - Page Layout - Drawing - Cross-Section - Edit Page Edit Print Print Size Size Layer Type Stacked Page Size Page Layout 1 in 1 Select Selected Version Pricing 2 Selected Pricing Drawing Options Long Clips (Ext) Template: Text & Print Group AutoCAD Delete Properties M Format Background Language Language Settings(S) Browse Details Add... Cancel Help

Technical diagram showing mechanical assembly with magnified views and component labels

3 Kuni silani

4 Sisestage paberisahtel seadmesse.

Illustration of hands using a tool to press or adjust a printer (no text or symbols visible)

2

3 Kuni siiani

Line drawing of a printer or printer with an open lid and internal components, no text or symbols present

Diagram showing a printer with a close-up of its image and a power button, labeled in Chinese.

Diagram showing a printer with a cable inserted into a device, highlighting the cable's connection to the front panel.

Remove jammed paper. 1/4

Remove toner cartridge 3/6

Asendustoonerikasseti mudeli number

• Canon Cartridge 056 L
  • Canon Cartridge 056
  • Canon Cartridge 056 H

Lisa

CLASS 1 LASER PRODUCT

LASER KLASSE 1

APPAREIL À LASER DE CLASSE 1

APPARECCHIO LASER DI CLASSE 1

PRODUCTO I ASFR DE CL ASF 1

APAREIHO A | ASFR DE CLASSF 1

LUOKAN 1 LASER TUOTE

LASERPRODUKT KLASS 1

Illustration of hands using a tool to adjust or install a printer (no text or symbols visible)

2

Line drawing of a printer or printer with an open lid and internal components, showing no text or symbols.

Diagram showing a printer with a close-up of its image and a power button, labeled in Chinese.

Diagram showing a printer with an attached cable and a magnified view of the cable being inserted, with a labeled connector pointing to the cable.

CLASS 1 LASER PRODUCT LASER KLASSE 1

APPAREL À LASER DE CLASSE 1 APPARECCHIO LASER DI CLASSE 1

PRODUCTO I ASFR DE CLASE 1

APARELHO A LASER DE CLASSE 1

LUOKAN 1 LASER TUOTE LASERPRODUKT KLASS 1

Screenshot of a software interface for configuring database tables, showing options for table name, size, and formatting.

Illustration of hands using a tool to adjust or install a printer (no text or symbols visible)

2

3 Až sem

Line drawing of a printer or printer with an open lid and internal components, no text or symbols present

Diagram showing a printer with a close-up of its image and a power switch, labeled in Chinese.

Diagram showing a printer with an attached cable and a close-up of its cable, highlighting the cable's connection to the printer.

CLASS 1 LASER PRODUCT

LASERKLASSE1

APPAREL À LASER DE CLASSE 1

APPARECCHIO LASER DI CLASSE 1

PRODUCTO LASER DE CLASE

APARELHO A LASER DE CLASSE 1

LUOKAN 1 LASER TUOTE

LASERPRODUKT KLASS

File Properties Database: C:\Users\Documents\Documents\Documents\Audio Name: Format story All Size and format(S) Default Format Display Format story 1x1 AutoCADs (AutoCADs) Dispersed list Name of format: Dispersed list Cell format (Cell) Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete Delete

Technical diagram showing a hand operating a device with magnified views and a close-up of the component labeled AA.

3 Až potia!

4 Zásuvku na papier vložte do zariadenia.

Illustration of hands using a tool to adjust or install a printer (no text or symbols visible)

2

3 Až potiaľ

Line drawing of a printer or printer with an open lid and internal components, no text or symbols present

Diagram showing a printer with a close-up of its image and a power switch, labeled in Chinese.

Diagram showing a printer with an attached cable, highlighting the cable's connection to a device with a magnified view.

Remove jammed paper. 1/4

Remove toner cartridge 3/6

CLASS 1 LASER PRODUCT LASER KLASSE 1

APPAREL À LASER DE CLASSE 1 APPARECCHIO LASER DI CLASSE 1

PRODUCTO I ÁSFR DE CLASE 1

APARELHO A LASER DE CLASSE 1

LUOKAN 1 LASER TUOTE LASERPRODUKT KLASS 1

Illustration of hands using a tool to adjust or install a printer (no text or symbols visible)

2

3 Do tukaj

Line drawing of a printer or printer with an open lid and internal components, no text or symbols present

5 Pritisnite vlerčoločite velikost in vrsto papirja v skladu z navodili na zaslonu.

V primeru težave

Diagram showing a printer with a close-up of its image and a power button, labeled in Chinese.

Diagram showing a printer with a cable inserted into a device, highlighting the cable's connection to the front panel.

Remove jammed paper. 1/4

Zamenjava kartuše s tonerjem

Zamenjavo kartuše s tonerjem opravite v skladu z navodili na zaslonu.

Remove toner cartridge 3/6

CLASS 1 LASER PRODUCT

LASERKLASSE I

APPAREIL À LASER DE CLASSE 1

APPARECCHIO LASER DI CLASSE 1

PRODUCTO I ASFR DE CL ASF 1

APAREIHO A1 ASFR DE CLASSE 1

LUOKAN 1 LASER TUOTE

LASERPRODUKT KLASS 1

Illustration of hands using a tool to adjust or install a printer (no text or symbols visible)

2

3 Do ovdje

Line drawing of a printer or printer with an open lid and internal components, no text or symbols present

5 Pritisnite 📄 inavedite veličinu i vrstu papira u skladu sa zaslonom.

Ako je došlo do problema

Diagram showing a printer with a close-up of its image and a power button, both labeled in Chinese.

Diagram showing a printer with an attached cable and a close-up of the cable being inserted, with a magnified view highlighting the cable's connection.

Ako problem i dalje postoji, pogledajte Korisnički vodič.

Došlo je do zaglavljivanja papira

Uklonite zaglavljeni papir u skladu s uputama na zaslonu.

Remove jammed paper. 1/4

Remove toner cartridge 3/6

CLASS 1 LASER PRODUCT

LASER KLASSE 1

APPAREIL À LASER DE CLASSE 1

APPARECCHIO LASER DI CLASSE 1

PRODUCTO I ASFR DE CLASE 1

APAREIHO A1 ASFR DE CLASSE 1

LUOKAN 1 LASER TUOTE

LASERPRODUKT KLASS 1

File Properties Application List Unrealisable Importable Importable Importable Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: Name: None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None None

Diagram illustrating a mechanical assembly process with labeled components and directional arrows indicating motion or movement.

3 Eddig a jelig

Illustration of hands using a tool to adjust or install a printer (no text or symbols visible)

2

3 Eddig a jelig

Line drawing of a printer or printer with an open lid and internal components, no text or symbols present

Diagram showing a printer with a close-up of its image and a power button, with Chinese annotations indicating action buttons.

Diagram showing a printer with a cable inserted into a device, highlighting the cable's connection to the front panel.

CLASS 1 LASER PRODUCT

LASERKLASSE

APPAREIL À LASER DE CLASSE 1

APPARECCHIO LASER DI CLASSE 1

PRODUCTO I ASFR DE CLASE 1

APAREIHO A1 ASFR DE CLASSE 1

LUOKAN 1 LASER TUOTE

LASERPRODUKT KLASS 1

File Printing Professional Show Settings | Image Layout | Format | View Layout | Layout Project Sub-Printed Text Project Size 100% Layer Type Main Page Size Project Layout 1.4 m 1 I insert Selected Weekly Printing spiked Printing Driving Connection Long Edge (Ext) Create Digital Broadcast Group Add... Delete... Edit... Preview... Save... Cancel Help

Pentru detalii

Illustration of hands using a tool to adjust or install a printer (no text or symbols visible)

2

Line drawing of a printer or printer with an open lid and internal components, no text or symbols present

Diagram showing a printer with a close-up of its image and a power button, with Chinese annotations indicating the process.

Diagram showing a printer with a cable inserted, highlighting the cable as an outlet or connection point.

Remove jammed paper. 1/4

Remove toner cartridge 3/6

File Setting Add Settings View Settings Language Settings Data Settings Data Set Data Source Data Type Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size Data Size

Technical diagram showing a mechanical assembly with labeled components and directional arrows indicating motion or assembly.

3 До това ниво

Illustration of hands using a tool to adjust or install a printer (no text or symbols visible)

2

3 До това ниво

Line drawing of a printer or printer with an open lid and internal components, no text or symbols present

Diagram showing a printer with a close-up of its image and a power button, both labeled in Chinese.

Diagram showing a printer with an attached cable and a close-up of the cable being inserted, with a magnified view highlighting the cable's connection.

Remove jammed paper. 1/4

Remove toner cartridge 3/6

CLASS 1 LASER PRODUCT

LASER KLASSE 1

APPAREIL À LASER DE CLASSE 1

APPARECCHIO LASER DI CLASSE 1

PRODUCTO LÁSER DE CLASE 1

APARELHO A LASER DE CLASSE 1

LUOKAN 1 LASER-TUOTE

LASERPRODUKT KLASS 1

New Features Create Action: Create New Edit View: Edit View1 Create New Features Next Next Options Add Options: Delete Options: Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History Delete History 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 删除 撤销

Ayrıntılar için,

Illustration of hands using a tool to adjust or install a printer (no text or symbols visible)

2

3 Buraya

Line drawing of a printer or printer with an open lid and internal components, no text or symbols present

Diagram showing a printer with a close-up of its image and a power button, with Chinese annotations indicating the process.

Diagram showing a printer with a cable inserted into a device, highlighting the cable's connection to the front panel.

CLASS 1 LASER PRODUCT

LASER KLASSE 1

APPAREIL À LASER DE CLASSE 1

APPARECCHIO LASER DI CLASSE 1

PRODUCTO LÁSER DE CLASE

APARELHO A LASER DE CLASSE 1

LUOKAN 1 LASER-TUOTE

LASERPRODUKT KLASS 1

Line drawing of a printer with a paper airplane and a small screen on top (no text or symbols)

الشاشة (مفتاح [ posture] ) OK▶◀▼▲ (مفتاح [ رagog ] المفتاح الرقمية (*) * (مفتاح [ مسح ] (#) #

قمىاقل來 ربع لقنتلا

تأكيد الإعداد

OK اضغط على

Remove jammed paper. 1/4

Remove toner cartridge 3/6

Diagram showing a printer with a close-up of its image and a power button, both circled for visibility or action.

Diagram showing a printer with a cable inserted into a device, highlighting the cable's connection to a device with a close-up view.

CLASS 1 LASER PRODUCT

LASER KLASSE 1

APPAREIL À LASER DE CLASSE 1 APPARECCHIO LASER DI CLASSE 1 PRODUCTO LÁSER DE CLASE 1

APARELHO A LASER DE CLASSE 1 LUOKAN 1 LASER-TUOTE LASERPRODUKT KLASS 1

Line drawing of a printer with a paper airplane and control panel (no text or symbols)

Net Viewing (User) Basic Settings: Page Layout: Setting [View Icon] Page Page Name Page Size Size Outer Size Max/Min/Export Size PageLayout 1 = 1 Select All Text & Copy/Printing Cutoff/Offset Binding Locations Long Text (Ext) Maple Color Format (Q) Group Edit... Cancel Help

graph TD
    A["Start: Setting a closed door"] --> B["Step 1: Setup a door with visible parts including 'A4/A5' and 'A3', 'A2', 'A1', 'A0', 'A3'."]
    B --> C["Step 2: Setup a door with visible parts including 'A4', 'A2', 'A1', 'A0', 'A3'."]
    C --> D["Step 3: Setup a door with visible parts including 'A4', 'A2', 'A1', 'A0', 'A3'."]
    D --> E["End: Setup a closed door with visible parts including 'A4', 'A2', 'A1', 'A0', 'A3'."]

Remove jammed paper. 1/4

تعويض کارتریج تونر

Remove toner cartridge 3/6

Diagram showing a printer with a close-up of its screen and power button, labeled in Chinese.

Diagram showing a printer with a cable inserted into a device, highlighting the cable's connection to a small electronic device.

CLASS 1 LASER PRODUCT

LASER KLASSE 1

APPAREIL À LASER DE CLASSE 1

APPARECCHIO LASER DI CLASSE 1

PRODUCTO LÁSER DE CLASE 1

APARELHO A LASER DE CLASSE 1 LUOKAN 1 LASER-TUOTE LASERPRODUKT KLASS 1

30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan

One Canon Park, Melville, NY 11747, U.S.A.

CANON EUROPA N.V.

Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands

2F Jinbao Building No.89, Jinbao Street,

Dongcheng District, Beijing 100005, PRC

CANON SINGAPORE PTE LTD

1 Fusionopolis Place, #15-10, Galaxis, Singapore

138522

CANON AUSTRALIA PTY LTD

Building A, The Park Estate, 5 Talavera Road,

Macquarie Park, NSW 2113, Australia

CANON GLOBAL WORLDWIDE SITES

https://global.canon