TL-SG1016PE - Home Automation TP-LINK - Free user manual and instructions

Product type	16-Port Gigabit PoE+ Network Switch
Brand	TP-Link
Model	TL-SG1016PE
Category	Home Automation
Power Supply	AC 100-240 V, 50/60 Hz, IEC connector
Key Features	16 RJ45 ports 10/100/1000 Mbps, 8 PoE+ ports (802.3af/at), 65W PoE budget, management via web interface or Easy Smart utility, QoS, VLAN, desktop or 19-inch rack mount, silent ventilation
Maintenance and Cleaning	Unplug the device before cleaning. Use a soft, dry cloth. Do not use solvents or abrasive products.
Safety	Do not disassemble the device. Do not use near water. Unplug during thunderstorms. Use only the provided power adapter.
Spare Parts and Repairability	No replaceable parts available. Any opening voids the warranty. Contact TP-Link for any repairs.
General Information	Easy Smart managed switch, compliant with IEEE 802.3 standards, metal casing, built-in fan, operating temperature 0°C to 40°C, humidity 10% to 90% non-condensing.

Frequently Asked Questions - TL-SG1016PE TP-LINK

How to install the TL-SG1016PE switch on a desk?

Place the switch on a flat, stable surface. Remove the protective covers from the provided rubber feet and attach them to the four corners of the casing to prevent slipping.

Can I mount the switch in a rack?

Yes, attach the mounting brackets to each side of the switch using the provided screws, then secure the switch to the rack with appropriate bolts (not provided).

How do I connect the switch to my network?

Use an Ethernet cable to connect an RJ45 port on the switch to your router or another network device. Connect the power after making the connections.

What is the default IP address to access the management interface?

The default IP address is 192.168.0.1. Configure your computer to be on the same subnet (e.g., 192.168.0.x with netmask 255.255.255.0).

How do I configure the switch via the web interface?

Open a browser and enter http://192.168.0.1. Log in with the default username and password admin (lowercase). You can then configure the switch.

How to use the Easy Smart utility to configure the switch?

Download the Easy Smart utility from the TP-Link website. Launch it and it will automatically detect compatible switches on your network. You can configure them centrally.

What to do if I cannot access the management interface?

Check that your computer has an IP address in the same subnet (192.168.0.x). Ensure the Ethernet cable is properly connected and the switch is powered on. If necessary, reset the switch to factory defaults.

Is it normal for the switch to heat up?

Yes, the switch may heat up during normal operation, especially under PoE use. Ensure it is well ventilated and do not block the ventilation openings.

Can I use SFP modules with this switch?

The TL-SG1016PE model does not have SFP slots. Only RJ45 ports are available. For fiber connections, use a media converter.

How to clean the switch?

Unplug the power before cleaning. Use a dry, soft cloth. Never use liquids or chemicals.

USER MANUAL TL-SG1016PE TP-LINK

Easy Smart&Smart&Managed Rackmount Switch

CONTENTS

Deutsch....01

English....06

Español....11

Ελληνικά....16

Français....21

Italiano....26

Português....31

Suomi....36

Nederlands....41

Svenska....46

Norsk....51

Dansk....56

Türkçe....61

Installation

- Tischmontage

- SFP-Port

- Einschalten

Konfiguration

- Desktop Installation

To install the device on the desktop, please follow the steps below:

1. Set the device on a flat surface strong enough to support the entire weight of the device with all fittings.
2. Remove the adhesive backing papers from the rubber feet.
3. Turnover the device and attach the supplied rubber feet to the recessed areas on the bottom at each corner of the device.

- Rack Installation

To install the device in a rack, follow the instructions described below:

1. Check the grounding and stability of the rack.
2. Secure the supplied rack-mounting brackets to each side of the device with supplied screws.

1. After the brackets are attached to the device, use suitable screws (not provided) to secure the brackets to the rack.

Connection

- Ethernet Port

Connect an Ethernet port of the switch to the computer by RJ45 cable as the following figure shown.

- SFP Port

For switches with SFP ports, you can connect a SFP port to a SFP module. If an SFP transceiver is installed in a slot and has a valid link on the port, the associated RJ45 port will be disabled and cannot be used.

- Console Port

For switches with the console port, you can connect the console port with your computer by the console cable. Then you can load the CLI to manage the switch.

- Power On

Plug the female connector of the provided power cord into the power socket of the device, and the male connector into a power outlet.

Configuration

- Configure the Switch Using the GUI

1. Set the IP address of your PC in the same subnet of the switch. The IP address is 192.168.0.x("x" is any number from 2 to 254); the Subnet Mask is 255.255.255.0.
2. Open a web browser and type the default management address http://192.168.0.1 in the address field of the browser, then press the Enter key.
3. Enter admin for the default User Name and Password, both in lower case letters. Then click the Login button or press the Enter key.
4. After a successful login, you can configure the switch on the management page.

- Configure the Switch Using the CLI (Only for Smart Switches and Managed Switches)

You can log on to the switch and access the CLI to manage the switch. For the detailed instructions as to how to do this, please refer to the CLI Guide.

- Configure the Switch Using the Utility (Only for Easy Smart Switches)

You can use the Easy Smart Configuration Utility to centrally manage entire networks of the Easy Smart Switches. For the detailed instructions as to how to do this, please refer to the Utility User Guide.

Instalación

- Puerto SFP

- Encender

Configuración

- Θúpa Console

- Ενεργοποιήστε

Ρύθμιση

Configuration

- Configurer le switch via son interface graphique

- Accensione

Configurazione

- Configure lo Switch usando la GUI

- Ligar

Configuração

- Configurar o Switch via Interface gráfica

- Virta päällä

Konfigurointi

- Konfiguroi kytkin GUI:lla

- Inschakelen

Configuratie

- Desktop-installation

- Ström på

Konfiguration

- For å slå på

Konfigurasjon

- Tændt

Konfiguration

- Cihazı Çalıştırma

Yapılandırma

• When a product has a power on/off button, the power on/off button is one way to turn-off the product. For products without the on/off button, the only way to completely turn-off the product is to disconnect the product or the power adapter from the power source. The disconnected device shall remain readily operable.
• Do not open this product or attempt to service it; it may expose you to dangerous high voltage or other risks. Opening a sealed component or sealed product/s will void the warranty. For product servicing, please contact us.
• Do not operate this product near water.

TP-LINK Limited Product Warranty

For TP-LINK Branded Products Only.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE).

TO THE EXTENT ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS.

TP-LINK warrants the TP-LINK branded hardware product contained in the original packaging against defects in materials and workmanship when used normally in according with TP-LINK's guidelines for some period which depends on the local service from the date of original retail purchase by the end-user purchaser.

Español

South Building(floors 1,3,4,5) and 28(floors 1-4), Central Science & Technology Park, Shennan Rd, Nanshan, Shenzhen, China

Robert-Bosch-Straße 9, 65719 Hofheim am Taunus, Germany

Unit 2 & 3 Riverview (142-144), Cardiff Road, Reading, RG1 8EW

Marathonodromou 77, Marousi 151 24, Greece

Specifications are subject to change without notice. TP-LINK is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2016 TP-LINK TECHNOLOGIES CO., LTD. All rights reserved.