SILVERCREST SSE 6 B1 - Soap dispenser

SSE 6 B1 - Soap dispenser SILVERCREST - Free user manual and instructions

Find the device manual for free SSE 6 B1 SILVERCREST in PDF.

📄 86 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SILVERCREST SSE 6 B1 - page 6
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Automatic Soap Dispenser
Brand SilverCrest
Model SSE 6 B1
Dimensions (approx.) 7.5 x 7.5 x 22 cm
Weight 0.3 kg
Power Supply 4 x AA batteries (not included)
Capacity 250 ml
Dispensing Method Infrared sensor automatic
Material Plastic (ABS)
Color White (typical)
Liquid Type Liquid soap, hand sanitizer
Dispense Amount Adjustable (approx. 1 ml per pump)
Battery Life Approx. 6 months (depending on usage)
Water Resistance Not waterproof; keep away from splashes
Cleaning Instructions Wipe with a damp cloth; do not immerse in water
Safety Features Low battery indicator; automatic shut-off when empty (some models)
Spare Parts Available Contact SilverCrest service for replacement parts
Repairability Battery compartment accessible; electronics not user-serviceable
Certifications CE, RoHS

Frequently Asked Questions - SSE 6 B1 SILVERCREST

How do I install batteries in the SilverCrest SSE 6 B1 soap dispenser?
Open the battery compartment on the back or bottom, insert 4 AA batteries (not included) following the polarity markings, and close the compartment securely.
My soap dispenser is not dispensing any soap. What should I do?
First, check if the batteries are inserted correctly and have sufficient charge. Then ensure the soap container is filled. If the sensor is blocked or dirty, clean it gently with a dry cloth. Adjust the dispense amount if possible.
How do I clean the SilverCrest SSE 6 B1?
Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or immerse the dispenser in water. The sensor lens should be cleaned regularly to maintain performance.
Can I use hand sanitizer or foam soap in this dispenser?
The dispenser is designed for liquid soap. Hand sanitizer (gel or liquid) may work if it has a similar viscosity. Foam soap is not recommended as it requires a different mechanism.
How do I adjust the amount of soap dispensed?
Look for a dial or switch inside the battery compartment or under the dispenser. Turn it to increase or decrease the dose. Refer to the manual for exact location.
What does the flashing LED mean?
A flashing LED typically indicates low battery. Replace the batteries with new ones. If flashing persists, check for blockages or contact customer service.
Is the soap dispenser waterproof?
No, it is not waterproof. Avoid splashing water or placing it in wet areas. Clean only with a damp cloth and do not submerge in water.
Why does the dispenser dispense soap without hand detection?
This may happen if the sensor is obstructed or if there is moisture on the lens. Clean the sensor area. Also, ensure the dispenser is placed in a location without strong light interference.
How do I refill the soap container?
Open the top cover or unscrew the cap (depending on model). Pour liquid soap into the container, being careful not to overfill. Close securely before use.
Where can I find spare parts for the SSE 6 B1?
Spare parts are available through SilverCrest customer service or authorized dealers. Contact support with your model number for assistance.

User questions about SSE 6 B1 SILVERCREST

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Soap dispenser in PDF format for free! Find your manual SSE 6 B1 - SILVERCREST and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SSE 6 B1 by SILVERCREST.

USER MANUAL SSE 6 B1 SILVERCREST

natural_image Modern bathroom toilet with water dispenser and sink, showing interior lighting and a close-up inset of the toilet (no text or symbols visible)

AUTOMATIC SOAP DISPENSER SSE 6 B1

GB

AUTOMATIC SOAP DISPENSER

Operation and safety notes

\$1

ELEKTRIČNI DOZIRNIK MILA

GB Operation and safety notes Page 5

Intended use......Page 6

Description of parts....Page 6

Technical data......Page 7

Included items ...... Page 7

Safety Page 7

Safety instructions for batteries/rechargeable batteries ..... Page 9

Before first use...... Page 12

Operation ...... Page 12

Inserting / Replacing the batteries...... Page 12

Filling the container with soap......Page 13

Using the product......Page 13

Cleaning and care......Page 14

Troubleshooting Page 15

Disposal Page 15

Warranty Page 16

Warranty claim procedure......Page 17

Service Page 18

List of pictograms used
SILVERCREST SSE 6 B1 - Warranty Page 16 - 1Direct current/voltageSILVERCREST SSE 6 B1 - Warranty Page 16 - 2Use indoors

Automatic soap dispenser

- Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product. The instructions for use are part of the product. They contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use. Only use the product as described and for the specified applications. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

Intendeduse

The product is intended for dispensing liquid soap in the washroom. The product is for private use only and is not intended for medical or commercial use.

Description of parts

1 Cover
2 Soap container
3 Sensor
4 Soap outlet

5 Battery cover
6 ON/OFF switch
7 Battery compartment

- Technical data

Battery: 4 x 1.5 V AAA/LR03

(included in delivery)

Capacity: approx. 330 ml (approx. 315 ml at MAX mark)

Included items

1 Automatic soap dispenser

4 Batteries

1 Directions for use

SILVERCREST SSE 6 B1 - Included items - 1

Safety

KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE!

SILVERCREST SSE 6 B1 - KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE! - 1

SILVERCREST SSE 6 B1 - KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE! - 2

SILVERCREST SSE 6 B1 - KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE! - 3

SILVERCREST SSE 6 B1 - KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE! - 4

DANGER TO

LIFE AND ACCIDENT HAZARD

FOR TODDLERS AND SMALL CHILDREN!

Never allow children to play unsupervised with the packaging material. There is a danger of suffocation from the packaging material. Children frequently underestimate the dangers.

Children should be kept away from the packaging material at all times. This is not a toy.

■ Do not subject the product to

- any extreme temperatures,

- severe mechanical stress.

Otherwise damage to the product may result.

- Never open up the product! Have repairs carried out only by an electrician or the relevant service centre. Failure to observe this advice may result in damage to the product.

This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be made by children without supervision.

  • Do not use the product if it is damaged. Check at regular intervals for damage to the housing and battery compartment. Please note that damage arising from improper handling, non-observance of the operating instructions or interference with the inside of the product by unauthorised persons is excluded from the warranty.
  • Keep the product clean.
    Fill the product with liquid soap only.

SILVERCREST SSE 6 B1 - FOR TODDLERS AND SMALL CHILDREN! - 1

WARNING!

Do not immerse the product in water. Failure to observe this advice may result in damage to the product.

Only intended for use indoors.

SILVERCREST SSE 6 B1 - WARNING! - 1

SILVERCREST SSE 6 B1 - WARNING! - 2

Safety instructions for batteries / rechargeable batteries

■ DANGER TO LIFE! Keep batteries/recharge-able batteries out of reach of children. If

accidentally swallowed seek immediate medical attention.

■ Swallowing may lead to burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion.

SILVERCREST SSE 6 B1 - Safety instructions for batteries / rechargeable batteries - 1

DANGER OF EXPLOSION! Never recharge non-rechargeable batteries.

Do not short-circuit batteries / rechargeable batteries and / or open them. Overheating, fire or bursting can be the result.

■ Never throw batteries / rechargeable batteries into fire or water.
- Do not exert mechanical loads to batteries / rechargeable batteries.

Risk of leakage of batteries / rechargeable batteries

- Avoid extreme environmental conditions and temperatures, which could affect batteries / rechargeable batteries, e.g. radiators / direct sunlight.

If batteries / rechargeable batteries have leaked, avoid contact with skin, eyes and mucous membranes with the chemicals! Flush immediately the affected areas with fresh water and seek medical attention!

SILVERCREST SSE 6 B1 - Risk of leakage of batteries / rechargeable batteries - 1

WEAR PROTECTIVE GLOVES!

Leaked or damaged batteries / rechargeable batteries can cause burns on contact with the skin. Wear suitable protective gloves at all times if such an event occurs.

In the event of a leakage of batteries / rechargeable batteries, immediately remove them from the product to prevent damage.

Only use the same type of batteries / rechargeable batteries. Do not mix used and new batteries / rechargeable batteries.

■ Remove batteries / rechargeable batteries if the product will not be used for a longer period.

Risk of damage of the product

■ Only use the specified type of battery / rechargeable battery!
- Insert batteries / rechargeable batteries according to polarity marks (+) and (-) on the battery / rechargeable battery and the product.
Use a dry lint-free cloth or cotton swab to clean the contacts on the battery / rechargeable battery and in the battery compartment before inserting!
■ Remove exhausted batteries / rechargeable batteries from the product immediately.

- Before first use

Note: Remove all packaging materials from the product.

Operation

- Inserting / Replacing the batteries

CAUTION! RISK OF PRODUCT DAMAGE!

Note: Always observe the polarity indicated on the battery compartment 7 when inserting the batteries! Note: Always use batteries of the type Micro AAA, LR03. Note: Always use batteries of the same type.

Turn the product over and place it on a soft underlay to avoid scratching the surface.
☐ The ON/OFF switch 6 and battery compartment 7 are located under the battery cover 5.
Open the battery cover 5 (see Fig. B).
☐ Make sure the soap container 2 is empty and the ON / OFF switch 6 at "○" (OFF) position.
☐ Insert four 1.5 V (direct current) batteries (AAA / LR03) (included) into the battery compartment 7 (see Fig. C).
Note: Make sure you fit the batteries the right way round (polarity). The correct polarity is shown inside the battery compartment 7.
☐ Then close the battery cover 5.

- Filling the container with soap

☐ Make sure the soap container 2 is empty and the ON / OFF switch 6 at "○" (OFF) position.

Remove the cover 1.

Fill the soap container 2 up to the "MAX." mark with soap.

☐ Ensure that no soap enters the battery compartment 7 or the inner workings of the product. This could damage the product.

Place the cover 1 back into position and close it tightly.

• Using the product

Open the battery cover 5.

Turn on the product by sliding the ON / OFF switch 6 to "I" (ON) position.

☐ Close the battery cover 5.

Place the product on a solid level and non slip surface.

☐ Hold your hand between the two sensors 3 and the soap outlet 4 and catch the soap on your hand.

During the soap dispensing process, a white status indicator light will light up in the soap container 2. As soon as you move your hand away, the status indicator light will goes off automatically. If the product has just been filled, repeat the process until soap issues from the soap outlet 4.

Note: To avoid soap become dry out at the soap outlet, frequently clean the soap outlet 4.

Switch off the product by sliding the ON / OFF switch 6 to "O" (OFF) position, clean the soap outlet 4 with a dry fluff-free cloth. Then, switch on the product by sliding the ON / OFF switch 6 to "I" (ON) position.

- Cleaning and care

WARNING! DANGER OF EXPLOSION! Do not immerse the product in water.

Note: If no longer use, clean the empty soap container 2 by rinsing it with clean water. Fill the soap container 2 with clean water and repeat this step several times to remove the soap completely. The product may get damaged if the soap is not removed completely.
☐ Remove the batteries from battery compartment 7 and clean the outside surface and battery compartment 7 by using dry, fluff-free cloth.
☐ Use a slightly moist, fluff-free cloth and a mild detergent to remove stubborn dirt.
☐ Do not use corrosive cleaning agents. These substances may damage the basic material of the product.

- Troubleshooting

● = Problem
● = Cause
O = Remedy

● The soap is dispensed slower than usual from the soap outlet 4 or the product does not work.

The batteries are too weak.

○ Replace the batteries (see "Inserting / Replacing the batteries").

Water has entered the battery compartment7.

- Allow the battery compartment to dry completely. Insert new batteries (see "Inserting / Replacing the batteries").

- Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

SILVERCREST SSE 6 B1 - - Disposal - 1

Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1–7: plastics / 20–22: paper and fibreboard / 80–98: composite materials.

SILVERCREST SSE 6 B1 - - Disposal - 2

The product and packaging materials are recyclable, dispose of it separately for better waste treatment. The Triman logo is valid in France only.

SILVERCREST SSE 6 B1 - - Disposal - 3

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

SILVERCREST SSE 6 B1 - - Disposal - 4

To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.

Faulty or used batteries / rechargeable batteries must be recycled in accordance with Directive 2006/66/EC and its amendments. Please return the batteries / rechargeable batteries and / or the product to the available collection points.

SILVERCREST SSE 6 B1 - - Disposal - 5

Environmental damage through incorrect disposal of the batteries / rechargeable batteries!

Batteries / rechargeable batteries may not be disposed of with the usual domestic waste. They may contain toxic heavy metals and are subject to hazardous waste treatment rules and regulations. The chemical symbols for heavy metals are as follows: Cd = cadmium, Hg = mercury, Pb = lead. That is why you should dispose of used batteries / rechargeable batteries at a local collection point.

Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.

The warranty for this product is 3 years from the date of purchase. Should this product show any fault in materials or manufacture within

3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you.

The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase. This warranty becomes void if the product has been damaged, or used or maintained improperly.

The warranty applies to defects in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.

• Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions:

Please have the till receipt and the item number (e.g. IAN 123456_7890) available as proof of purchase.

You will find the item number on the rating plate, an engraving on the front page of the instructions for use (bottom left), or as a sticker on the rear or bottom of the product.

If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.

You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

Service

GB Service Great Britain

Tel.: 08000569216

E-Mail: owim@lidl.co.uk

CE

Pooblaščeni serviser:

OWIM GmbH & Co. KG

Stiftsbergstraße 1

74167 Neckarsulm

NEMČIJA

NOSTE OCHRANNÉ RUKAVICE!

NOSTE OCHRANNÉ RUKAVICE!

● = Problem
© = Ursache
O = Behebung

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SILVERCREST

Model : SSE 6 B1

Category : Soap dispenser