KOFF MK170N - Coffee grinder Eldom - Free user manual and instructions

Product Type	Burr Coffee Grinder
Brand	Eldom
Model	KOFF MK170N
Power	200 W
Supply Voltage	220-240 V ~ 50 Hz
Bean Hopper Capacity	250 g (max level marked)
Grind Settings	Adjustable fineness with knob (5)
Grind Volume Setting	Adjustable from 2 to 12 cups with knob (6)
Grinding Mechanism	Burr grinder (quern)
Operation	Push-button start/stop; automatic stop when preset amount ground
Indicator Light	Yes, indicates operation
Safety Features	Start-up protection if hoppers not correctly fitted; child safety (not for children under 8 without supervision)
Housing Material	Plastic (body) and glass/plastic hoppers
Cleaning	Wipe body with damp cloth; hoppers and covers washable in warm water with mild detergent; do not immerse base, do not use dishwasher
Intended Use	For grinding whole coffee beans only; not for industrial use
Warranty	Valid only for grinding coffee beans; damage from other use voids warranty
Spare Parts	Contact authorized service centre; not user-serviceable
Dimensions	Not specified in manual; approximate height 30 cm, width 15 cm (typical for such grinder)
Weight	Not specified; approximately 1.5 kg
Power Cord Length	Short cord design to reduce tripping; extension cord usable with caution

Frequently Asked Questions - KOFF MK170N Eldom

How do I adjust the grind fineness on the Eldom KOFF MK170N?

Use the knob (5) on the front of the grinder. Turn it to select the desired fineness – finer for espresso, coarser for filter coffee or Turkish coffee.

How do I set the amount of ground coffee?

Use the knob (6) to choose the number of cups from 2 to 12. The grinder will automatically stop when the set amount has been ground.

How do I clean the coffee grinder?

Unplug and let cool. Remove the bean hopper (2) and ground coffee hopper (11). Wipe the body with a damp cloth. Wash the hoppers and covers with warm water and mild detergent using a toothbrush, rinse and dry thoroughly. Do not immerse the base or use a dishwasher.

Can I grind other items besides coffee beans?

No. This grinder is designed only for grinding whole coffee beans. Grinding other substances may damage the grinder and void the warranty.

What should I do if the grinder jams or stops?

Unplug the grinder. Empty the bean hopper (2) and remove any stuck beans. Clean the burr grinder as described in the manual. If the problem persists, contact an authorized service centre.

Is the Eldom KOFF MK170N safe for children to use?

Children aged 8 and above can use it under adult supervision. Children under 8 must be kept away. Never let children clean or maintain the grinder unsupervised.

How do I know when the grinding is complete?

The grinder stops automatically after grinding the preset amount. The indicator light (7) turns off. You can also stop it manually by pressing the power switch (8).

What type of coffee grinder is the MK170N?

It is an electric burr grinder (also called a quern grinder). It uses two abrasive surfaces to crush beans uniformly, suitable for espresso, drip, and Turkish coffee.

Can I use an extension cord with this grinder?

Yes, but use caution. The extension cord must have appropriate ratings (same as the grinder: 200 W, 220-240 V). Arrange it so that it does not pose a tripping hazard, especially for children or pets.

How should I store unused ground coffee?

You can store the ground coffee in the ground coffee hopper (11) with the cover (10) on. For longer storage, transfer to an airtight container and keep in a cool, dry place.

USER MANUAL KOFF MK170N Eldom

Exterior view of a modern electric coffee maker with visible branding and control knob (no text or symbols on the device itself)

The disposal of used electrical and electronic equipment (applies to European Union countries and other European countries with separate waste-collection systems).

This symbol on the product or its packaging indicates that it should not be classified as household waste. It should be handed over to an appropriate company dealing with the collection and recycling of electrical and electronic equipment. The correct disposal of the product will prevent potential negative consequences for the environment and human health resulting from hazardous substances present in the product. Electrical devices must be handed over to restrict their re-use and further treatment. If the device contains batteries, remove them, and hand them over to a storage point separately. DO NOT THROW EQUIPMENT INTO THE MUNICIPAL WASTE BIN. Material recycling helps to preserve natural resources. For detailed information on how to recycle this product, please contact your local authority, the recycling company, or the shop where you bought it.

/CZ/

Close-up of a black circular mechanical knob with directional arrows and a dial indicator (no text or symbols)

rys.1

OCHRONA ŚRODOWISKA

Before first use, please carefully read the entire content of this manual;

1. Connect the coffee grinder only to a suitably earthed socket compatible with the parameters indicated in the instructions.

2. Do not touch any moving parts.

3. Do not use outdoors.

4. Never put your fingers or any objects in the container (2).

5. Do not use the device if the abrasive surfaces are damaged.

6. This appliance is for grind coffee beans only. Grind only coffee beans, otherwise you will damage the grinder and lose your warranty.

7. To disconnect the unit from the power supply never pull the cord, use the plug.

8. Unplug coffee grinder from outlet when not in use and before cleaning.

9. Home use only. Do not use for industrial purposes.

10. The device can be used by children aged 8 and older and by persons with limited physical, sensory or mental capabilities, or persons without sufficient experience and knowledge only under supervision or if previously instructed on the safe use of the appliance and the possible risks. Children shall not play with the appliance. Cleaning and maintenance that are the responsibility of the user shall not be carried out by children without supervision. Protect the appliance and the power cord against children under 8 years old.

11. Never use the if the supply cord is damaged. If found damaged in any way, consult the producer's authorized service centre. The list of service centres is to be found in the appendix and on www.eldom.eu.

12. Refer servicing to an authorized service centre. Modifying the appliance or using spare parts or elements other than the original ones is forbidden and can expose the user to hazard.

13. Eldom Sp. z o. o. shall waive any liability for any damages resulting from user's operating the device improperly.

NOTE:

The length of the power cord is designed to reduce the risk of injury from entanglement or tripping over a longer cord.

If a longer cord is required, the device can be connected to an extension cord, provided that caution is exercised when using it.

If an extension cord is used:

1. its parameters should correspond to the equipment parameters indicated on the rating plate and in this manual,
2. it shall be arranged in such a manner that it does not lie in a place where children or pets could accidentally pull or trip over it.

GENERAL INFORMATION

1 Bean hopper cover2 Bean hopper3 Quern4 Grinding chamber5 Coffee grinding thickness adjustment knob6 Coffee grinding amount adjustment knob7 Indicator light8 Power switch9 Housing10 Ground coffee hopper cover11 Ground coffee hopper

TECHNICAL DATA

Power: 200 WSupply voltage: 220-240V ~ 50HzVolume: 250g

INTENDED

The burr grinder MK170N is intended for grinding coffee beans. The grinding mechanism allows the user to adjust fineness of the grind. You can enjoy aromatic coffee grind suitable both for espresso machines and as Turkish coffee.

USE

Before using the machine for the first time, please carefully read this manual. After unboxing the device, make sure it has not been damaged while transported. If in doubt, please refrain from using the device until you consult the service centre.

NOTE:

Before using the device for the first time, thoroughly clean and dry any parts that come into contact with the coffee.

Before each use, check the hoppers (2, 11) for any undesirable objects or contaminants.

• Make sure that the device is disconnected from the power supply and switched off.
• Place the device on a flat and stable surface.
• Remove the cover (1) and pour the beans into the hopper (2) – do not exceed the MAX level marked on the hopper (2).
• Replace the cover (1) on the hopper (2).
• Then insert the hopper (11) with the cover (10) in place into the body (9)
• Set the grinding thickness using the knob (5).
• Set the amount of ground coffee using the knob (6). You can set the number of cups from 2 to 12.
• Connect the appliance to a main supply with the parameters specified in the manual.
• Press the power switch (8) to grind the coffee. When grinding the coffee, hold the cover (1) with your hand.
  • Óperation is indicated by the indicator light (7).
• The device will continue to operate until the amount of coffee specified using the knob (6) has been ground. Bean hopper. The coffee grinder can be stopped at any time by pressing the power switch (8).
• After grinding the coffee, wait until the quern stops, slide out the hopper (11) and open the cover (10).

NOTE:

The device is equipped with start-up protection to prevent switching on without the hoppers being correctly fitted (2, 10).

- Switch off and disconnect the device from the mains after operation.

USEFUL TIPS

- It is recommended to grind an exact amount of coffee needed at any given moment.

- If you prepare the grind for an espresso machine, please follow recommendations from the manufacturer of the espresso machine.

- You can store the unused grind in the container.

- In the event that the abrasive surfaces of the machine get blocked, unplug the burr grinder, empty the container (2), unscrew it and clean the abrasive surfaces (see: CLEANING AND MAINTENANCE).

CLEANING AND MAINTENANCE

- Do not use abrasives, cleaning powders, acetone, alcohol, etc. to clean the device.

- None of the parts of the grinder are suitable for washing in mechanical dishwashers.

- Never immerse the device body in water or wash under running water.

- Disconnect the device from the mains.

- Pull the hopper (11) out of the body (9) and remove the cover (1) from the hopper (2).

- Remove the unground coffee beans from the hopper (2). Wipe the inside of the hopper (2) with a soft, damp cloth and then dry thoroughly.

- The hopper (2, 11) and covers (1, 10) can be washed in warm water with a little bit of detergent using a toothbrush and rinsed under running water and then thoroughly dried.

- Clean the device body (9) using a damp cloth.

- All components must be dry before reassembly.

- Do not use any lubricants on the quern inside the hopper (4).

ENVIRONMENTAL PROTECTION

- the appliance is made of materials which can be recovered or recycled

- the appliance should be handed over to the appropriate centre of collection and recycling of electrical and electronic equipment

BEZPEČNOSTNÍ POKYNY

BESTIMMUNG

ПРЕДНАЗНАЧЕНИЕ

A KÉSZÜLÉK HASZNÁLATA

z