KH 4256 - Pump ULTIMATE SPEED - Free user manual and instructions
Find the device manual for free KH 4256 ULTIMATE SPEED in PDF.
| Product Type | Air Pump (Inflation and Pressure Measurement) |
| Model | KH 4256 |
| Brand | Ultimate Speed |
| Power Supply | 12 V DC via vehicle cigarette lighter |
| Current Consumption (Inflation) | 6 A |
| Current Consumption (Pump) | 5 A |
| Working Pressure (Inflation) | 2.8 bar / 40 Psi |
| Maximum Pressure Range (Measurement) | 17 bar / 250 Psi |
| Air Flow Rate | 4.5 l/min |
| Short Period Operation (Inflation) | 30 min ON, 30 min OFF |
| Short Period Operation (Pump) | 10 min ON, 30 min OFF |
| Sound Pressure Level | 77 dB(A) |
| Sound Power Level | 92 dB(A) |
| Operating Temperature | +5°C to +40°C |
| Humidity Range | 5 - 90% (non-condensing) |
| Dimensions (W x H x D) | 22 x 15 x 12 cm |
| Weight | Approx. 930 g |
| Included Accessories | 6 valve adapters, operating manual |
| Functions | Inflation, air pump operation, air pressure measurement |
| Cleaning Instructions | Wipe with soft dry cloth; do not use abrasives or solvents |
| Storage | Clean, dry place away from direct sunlight |
| Warranty | 3 years from purchase date |
| Certification | CE, EMC, Machinery Directive 2006/42/EC |
| Intended Use | Domestic, non-commercial inflation and pressure measurement of air-filled objects |
Frequently Asked Questions - KH 4256 ULTIMATE SPEED
User questions about KH 4256 ULTIMATE SPEED
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Pump in PDF format for free! Find your manual KH 4256 - ULTIMATE SPEED and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KH 4256 by ULTIMATE SPEED.
USER MANUAL KH 4256 ULTIMATE SPEED
natural_image
Red portable electric motor with attached cable and indicator lights (no visible text or symbols)AIR PUMP Original operating instructions
Index
Introduction 2
Information for these operating instructions.... 2
Copyright. 2
Intended use 2
Warnings....3
Safety....4
Basic Safety Instructions....4
Appliance description 6
Setting up and connecting 6
Safety instructions 6
Items supplied and delivery inspection 6
Unpacking 7
Disposal of the packaging....7
Requirements for the set-up location 7
Electrical connections....7
Handling and operation....8
Inflation operation 8
Air pump operation 8
Measure air-pressure....9
Cleaning 10
Storage / Disposal 10
Storage 10
Disposal of the appliance 10
Appendix 11
Technical data....11
EC Declaration of Conformity 12
Warranty 13
Service....13
Importer....13
GB
Introduction
Information for these operating instructions
These operating instructions are a component of the Air Pump KH 4256 (henceforth designated as the appliance) and they provide you with important information about the intended use, safety and connection as well as operation of the appliance.
The operating instructions must be constantly kept available close to the appliance. They are to be read and applied by everyone assigned to operate and troubleshoot the appliance.
Keep these operating instructions and hand them over with the appliance to any future owners.
Copyright
This documentation is copyright protected.
Any copying or reproduction, including extracts, as well as the reproduction of images, also in an altered state, is only permitted with the written permission of the manufacturer.
Intended use
This appliance is intended exclusively for...
- for the inflation of air-filled objects with valves and other large-volume inflatable articles.
- for measuring the air pressure of air-inflated objects.
- for operation on the 12-V circuit of vehicles via the cigarette lighter.
- for domestic, non-commercial use.
WARNING
Risks from improper use!
Risks can be created by the appliance if it is used for improper purposes and/or other types of use.
Use the appliance exclusively for intended purposes.
Pay heed to the procedures described in these operating instructions.
Claims of any kind resulting from damage caused by improper use, incompetent repairs, unauthorized modifications or the use of non-approved spare parts will not be acknowledged.
The operator alone will bear liability.
Warnings
In the existing operation instructions the following warnings are used:
DANGER
A warning at this danger level indicates a threatening dangerous situation.
If the dangerous situation is not avoided, it could result in death or serious injury.
Follow the instructions given in this warning notice to avoid the risks of death or serious injury to people.
ARNING
A warning of this danger level signifi es a possible dangerous situation.
If the dangerous situation is not avoided it can lead to injuries.
The directives in this warning are there to avoid personal injuries.
IMPORTANT
A warning of this danger level signifies possible property damage.
If the situation is not avoided it can lead to property damage.
The directives in this warning are there to avoid property damage.
NOTICE
A notice signifies additional information that assists in the handling of the appliance.
GB
Safety
In this chapter you receive important safety information regarding handling of the appliance.
This appliance complies with the statutory safety regulations.
Incorrect usage can, however, lead to personal injury and property damage.
Basic Safety Instructions
This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiencies in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used.
Children should be supervised to ensure that they do not play with the appliance.
Keep the appliance away from children and animals. Children often underestimate the risks of handling electric appliances.
When using the appliance, under no circumstances should you point it at yourself or others, especially not towards the eyes and ears.
There would be a real risk of personal injury.
Do not leave the appliance unattended when it is in operation and pay heed to the inflation instructions for the article to be inflated. The article being inflated could burst and cause serious injuries.
Store the appliance in a dry place and out of the reach of children.
Do not use the appliance while driving. Operation of the appliance whilst driving may cause an accident.
Use the appliance only with the vehicle engine switched off, so as not to burden the environment unnecessarily.
Before use, check the appliance for visible external damage. Do not put into operation an appliance that is damaged or has been dropped.
Do not subject the appliance to rain or wet weather and do not allow it to come into contact with water. There is a risk of electric shock!
During operation, keep all openings of the appliance free. Do not seal the openings with your hands or fingers and do not cover the unit. There would be a risk of it overheating.
Ensure that sand or other small debris cannot enter into the air inlet or outlet openings. These could damage the appliance.
Do not operate the appliance close to fl ammable liquids or gases. Do not suck in any fumes or hot vapours. Non-observance raises the risk of a fire or explosion.
Switch the appliance off and unplug the car adapter from the cigarette lighter:
- when you are not using the appliance;
- if y ou leave the appliance unsupervised;
- when cleaning the appliance;
- if the connecting cable is damaged;
- after penetration by foreign bodies or on making abnormal noises.
Use only the supplied connecting cable. Only by using these parts can you be sure that the safety requirements are being complied with.
Do not attempt to repair the appliance yourself.
Check to ensure that the appliance's connection cable is not damaged and that it is not laying over hot surfaces and/or sharp edges.
- Do not use the appliance if the car adapter plug or the connecting cable are damaged.
Should the connecting cable or the car adapter become damaged, immediately unplug the car adapter from the cigarette lighter.
The connecting cable on this appliance cannot be replaced. In the event of the connecting cable being damaged the whole appliance must be scrapped.
Repairs should only be carried out by authorized specialist companies or by our customer service department.
Do not, under any circumstances, open the appliance housing. The risk of an electric shock is present if the power carrying connections are touched or the electrical and mechanical construction is modified.
Protect the appliance against moisture and penetration by liquids. Never submerge the appliance in water, never locate the appliance in the close vicinity of water and never place any objects filled with liquids (such as vases) on the appliance. There would be the risk of a fatal electric shock.
■ Connect the connection cable only to a cigarette lighter in a vehicle. Pay heed to the instructions of the vehicle manufacturer for the use of the cigarette lighter.
GB
Appliance description
1 Air output opening
2 Function switch
3 Air pressure indicator in
- kg ^2 /¢inner red scale)
4 Connecting cable with car adapter
5 Connection valve with fastening lever
6 Valve adapter bonnets for the air outlet opening 1
7 Valve adapter bonnets for the connection valve with fastening lever 5
Setting up and connecting
Safety instructions
WARNING
Damage may occur to people and property when operating the appliance!
Observe the following safety information to avoid any risks:
Packaging material should not be used as a play thing.
There is a risk of suffocation!
To avoid risks to persons and property, pay attention to the requirements ▶
for the set-up location and the electrical connections.
Items supplied and delivery inspection
The appliance is delivered with the following components as standard:
Air Pump KH 4256
6 Valve adapters for different types of valves ●
This operating manual
NOTICE
Check the contents to ensure everything is both available and free of visible damage.
If the items supplied are incomplete, or damaged due to defective packaging or transportation, contact the Service Hotline (see chapter Service).
Unpacking
Remove all parts of the appliance and the operating instructions from the carton.
Remove all packing material.
Disposal of the packaging
The packaging protects the appliance from transport damage. The packaging materials are selected from the point of view of their environmental friendliness and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material and reduces the amount of generated waste. Dispose of packaging material that is no longer needed as per the regionally established regulations.
NOTICE
If possible preserve the appliance's original packaging during the warranty period so that, in the case of a warranty claim, you can package the appliance securely for return.
Requirements for the set-up location
For safe and fault free operation of the appliance, the set-up location must fulfil the following conditions:
Place the appliance on a fi rm, fl at and level surface.
Do not place the appliance in a hot, wet or very humid
environment or in the vicinity of fl ammable materials.
Electrical connections
IMPORTANT
Do not allow the connection cable to hang over edges (Trip wire effect).
Ensure that the appliance's connection cable is not damaged and is not laying over hot surfaces and/or sharp edges.
Ensure that the connection cable is not tightly stretched or kinked.
GB
Handling and operation
In this chapter you receive important information for the handling and operation of the appliance.
Ensure that the appliance is switched off (the function switch ^2 is at position "0") and then connect the cable to the cigarette lighter.
IMPORTANT
This appliance is not suitable for continuous operation. Continuous usage for more than 30 minutes in inflation operations (10 minutes for air pump operations) can cause overheating and damage to the appliance. Switch the appliance off after the specified time and take it back into operation again ONLY when the motor has cooled down.
Inflation operation
Remove the valve cap of the article to be inflated.
Fit the appropriate valve adapter attachment ⑥ on the air outlet opening ① of the appliance.
Insert the valve adapter bonnet 6 into the valve of the article to be infl ated.
Switch the appliance on, in that the function switch ② is placed in the position "II".
When the desired inflation level has been reached, switch the appliance off (function switch 2 to the position "0") and then remove the valve adapter attachment 6 from the inflated article.
Replace the valve cap back onto the inflated article.
Air pump operation
Check to see if a valve adaptor attachment ⑦ is required for use on the object to be inflated.
Should this be the case: Press the appropriate adapter valve bonnet ⑦ into the opening of the connection valve ⑤ and then push the closing lever down.
If you do not have to use an adapter valve bonnet ⑦, ensure that the closure of the connecting valve ⑤ is open. When open, the closing lever must point to the rear.
Place the opened connection valve 5 on the valve of the object whose air pressure is to be measured and then press it down so that it is seated firmly.
◆Close the connection valve 5 in that you push the closing lever down. Ensure that the connection valve cannot loosen itself.
Switch the appliance on, in that the function switch ② is placed in the position "1".
Check the increasing air pressure on the air pressure indicator ③. As soon as the desired inflation level has been reached, switch the appliance off (function switch ② in the position "0").
Open the closing lever of the connection valve ⑤ and then pull the connection valve (complete with the adapter valve bonnet ⑦, if one has been used) from the valve of the inflated article.
Measure air-pressure
NOTICE
The appliance does not need a power supply to measure the air pressure of an inflated object.
Check to see if a valve adaptor attachment ⑦ is required for use on the inflated object.
Should this be the case: Press the appropriate adapter valve bonnet ⑦ into the opening of the connection valve ⑤ and then push the closing lever down.
If you do not have to use an adapter valve bonnet ⑦, ensure that the closure of the connecting valve ⑤ is open. When open, the closing lever must point to the rear.
Place the opened connection valve 5 on the valve of the object to be inflated and then press it down so that it is seated firmly.
Close the connection valve 5, in that you push the closing lever down. Ensure that the connection valve cannot loosen itself.
Read off the air pressure on the air pressure indicator 3 of the appliance.
Open the closing lever of the connection valve ⑤ and then pull the connection valve (complete with the adapter valve bonnet ⑦, if one has been used) from the valve of the air-fi lled article.
GB
Cleaning
DANGER
Risk of electric shock.
Before you start cleaning, switch the appliance off and unplug the car adapter from the cigarette lighter.
IMPORTANT
Damage to the appliance!
To avoid irreparable damage when you are cleaning the appliance, ensure that moisture cannot penetrate into it. Do not use abrasive cleaners or solvents. They could damage the surfaces.
Clean the surfaces and the air vents of the appliance with a soft, dry cloth or a brush.
Storage / Disposal
Storage
Store the appliance in a clean, dry place away from direct sunlight.
Disposal of the appliance
Do not dispose of the appliance in your normal domestic waste. This appliance is subject to the provisions of European Directive 2002/96/EC.
Dispose of the appliance through an approved disposal centre or at your community waste facility. Observe the currently applicable regulations. In case of doubt, please contact your waste disposal centre.
Appendix
Technical data
| Air pump | |
| Rated voltage 12 V DC | |
| Current consumption 6 A | |
| Working pressure 2.8 bar /40 Psi | |
| Air flow 4,5 l/min. | |
| Maximum pressure range 17 bar /250 Psi | |
| Short period operation 10 min. ON, 30 min. OFF | |
| Blower | |
| Rated voltage 12 V DC | |
| Current consumption 5 A | |
| Short period operation 30 min. ON, 30 min. OFF | |
| Emission sound pressure level (LpAd) | 77 dB(A) |
| Sound power level (LwAd) 92 dB(A) | |
| Operating temperature + 5 - + 40°C | |
| Humidity 5 - 90% (no condensation) | |
| Dimensions 22 x 15 x 12 cm | |
| Weight 930 g approx. | |
GB
EC Declaration of Conformity
We, Kompernaß GmbH, Burgstrasse 21, D-44867 Bochum, responsible for compilation of the documents: Semi Uguzlu, declare on our sole responsibility that this product complies with all requirements of the Machinery Directive 2006/42/EC and the EMC Directive 2004/108/EC.
Type/Appliance designation:
Ultimate Speed Air Pump KH 4256
Serial number:
IAN 53356
Applied harmonized standards:
EN 60335-1: 2002 + A11 + A1: 04 + A12 + A2: 06 + A13: 08 + A14: 10
EN 62233: 2008
EN 1012-1: 1996
EN ISO 14121-1: 2007
EN ISO 12100-1: 2003 + A1: 2009
EN ISO 12100-2: 2003 + A1: 2009
EN 55014-1: 2006
EN 55014-2: 1997 + A1: 2001 + A2: 2008
You receive a 3-year warranty for this appliance as of the purchase date. This appliance has been manufactured with care and meticulously examined before delivery.
Please retain your receipt as proof of purchase. In the case of a warranty claim, please make contact by telephone with our service department. Only in this way can a post-free despatch for your goods be assured.
NOTICE
The warranty is valid only for material or manufacturing defects not, however, for transport damage, wear and tear or for damage to breakable parts, i.e. switches.
This product is for domestic use only and is not intended for commercial applications. In the event of misuse and improper handling, use of force and interference not carried out by our authorized service branch, the warranty will become void..
Your statutory rights are not restricted in any way by this warranty.
The warranty period is not extended by repairs made under the warranty. This applies also to replaced and repaired parts.
Damages or defects discovered after
purchase are to be reported directly after unpacking, at the latest two days after the purchase date.
Repairs carried out after lapse of the warranty period are subject to charge.
Service
DES UK LTD
Tel.: 0871 5000 700 (£ 0.10 / minute)
E-Mail: support.uk@kompernass.com
Kompernass Service Ireland
Tel: 1850 930 412 (0,082 EUR/Min.)
Standard call rates apply. Mobile operators may vary.
E-Mail: support.ie@kompernass.com
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
www.kompernass.com
Spis treści
Wprowadzenie....16
- Index
- Introduction 2
- Safety....4
- Appliance description 6
- Setting up and connecting 6
- Handling and operation....8
- Cleaning 10
- Storage / Disposal 10
- Appendix 11
- GB
- Introduction
- Information for these operating instructions
- Copyright
- Intended use
- WARNING
- Risks from improper use!
- Warnings
- DANGER
- A warning at this danger level indicates a threatening dangerous situation.
- ARNING
- A warning of this danger level signifi es a possible dangerous situation.
- IMPORTANT
- A warning of this danger level signifies possible property damage.
- NOTICE
- Safety
- Basic Safety Instructions
- Appliance description
- Setting up and connecting
- Safety instructions
- Damage may occur to people and property when operating the appliance!
- Items supplied and delivery inspection
- Unpacking
- Disposal of the packaging
- Requirements for the set-up location
- Electrical connections
- Handling and operation
- Inflation operation
- Air pump operation
- Measure air-pressure
- Cleaning
- Risk of electric shock.
- Damage to the appliance!
- Storage / Disposal
- Storage
- Disposal of the appliance
- Appendix
- EC Declaration of Conformity
- Type/Appliance designation:
- Serial number:
- Applied harmonized standards:
- Service
- Importer
- Spis treści
- Wprowadzenie....16
Brand : ULTIMATE SPEED
Model : KH 4256
Category : Pump