CL750I - Alarm clock radio THOMSON - Free user manual and instructions
Find the device manual for free CL750I THOMSON in PDF.
Download the instructions for your Alarm clock radio in PDF format for free! Find your manual CL750I - THOMSON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CL750I by THOMSON.
USER MANUAL CL750I THOMSON
- Take the appliance out of the box.
- Remove all the packaging from the product.
- Place the packaging inside the box or dispose of it safely in compliance with the wae sorting inructions shown on the product packaging. Safety warning and notice You mu read and underand all the inructions before using this appliance. The warranty will not apply if damage is caused by failure to follow the inructions.
1. Never remove the appliance casing.
2. Never place this appliance on top of other electrical equipment.
3. Protect the power cord from being epped on or pinched, particularly at
the plugs, sockets, and the point where it exits the appliance. Make sure that the power voltage corresponds to the voltage shown on the rating plate at the rear of the appliance. Always pull the plug from the socket when disconnecting from the mains. Never pull on the cord. Ensure you have completed all the other connections before connecting the plug.
4. Only use attachments/accessories that are recommended by the
5. Entru all appliance repairs to qualied repairers. Repair is needed when the appliance
has been damaged in any fashion, and in particular: - if the power cord is damaged; - in the event of a liquid spill or objects being inserted into the appliance; - if the appliance is exposed to rain or dampness; - if the appliance does not operate normally; - or if the appliance has been dropped or impacted.
6. The series panel is located on the bottom of the appliance.
7. Never block the air vents.
8. Make sure you have enough space for ventilation. Place the product on a able surface.
9. This device mu be used in a moderate climate, away from direct sunlight, naked ames
or heat, heating devices, cookers or any other devices (including ampliers) that generate heat. Do not inall near a heat source.
10. The batteries (battery pack or inserted batteries) mu not be exposed to excessive heat,
such as sunshine, re, etc.
11. Always unplug the device before cleaning it. Never lubricate any part of this appliance.
Gettingarted 12 Safetywarningandnotice 12 Contentsofthebox 14 Functions 14 Productdescription 14 Operation 15 Rechargeyourmobilephone 15 Specications 16 Warningaboutbatteries 17 Careoftheenvironment 18 Additionalinformation 18 Declarationofconformity 19- EN 13 - Clean it with a soft cloth. Do not use abrasive products or harsh cleaners.
12. Ensure that you always have easy access to the power cord, plug or adaptor to disconnect
this appliance from the mains if necessary.
13. Do not use this appliance near water. It mu not be dripped on or splashed. Do not use
this appliance in a damp or wet environment.
14. Disconnect this appliance in the event of a orm or if you are not going to use it for a long
15. This appliance can be used by children aged 8 and over, and by persons with a physical
or sensory disability, learning diculties or a lack of experience and knowledge, provided they are supervised or have received inructions on the safe use of the appliance, and they underand the risks involved. Children mu not play with the appliance or power cord (risk of rangulation). Children mu not clean or maintain the appliance without supervision.
16. This device mu only be supplied with very low safety voltage corresponding to the
marking on the device.
17. The battery should be removed from the device before disposal. The device mu be
disconnected from the power supply when removing the battery.
18. When using the product, it should be placed at lea 20 cm away from the human body.
The lightning bolt symbol within an equilateral triangle alerts users to the presence of dangerous uninsulated electrical voltages inside the device that are rong enough to present a risk of electric shock. The exclamation mark inside a triangle indicates the presence of important operating and maintenance (repair) instructions in the literature accompanying the appliance. Direct current Class II material Alternating current For indoor use only- EN 14 - Contents of the box y 1 x 4-in-1 wirelesscharger clock y 1 mains adapter y 1 CR2032 button battery (already installed in the appliance: remove the insulating plastic strip) y Instructions Functions y LED night light y Alarm clock y Mobile phone holder y Wireless charger for mobile phone, watch, earphones y Charging range ≤ 8mm y USB-A port for charging Product description
1. Wireless charging zone for smart watch
2. Wireless charging zone for compatible mobile phone
4. Wireless charging zone for wireless earphones
5. Night light switch
Press this button to turn on/o the LED night light
6. Mobile phone charging indicator light
Light on = charging in progress Flashing light = charging error. Light o = sleep mode / full charge / o
Press and hold for 2 seconds to set alarm; Press and hold for 5 seconds to set the time; Tap to switch between 2-digit hour and minute setting;
Tap to set time and alarm. Press and hold to turn o alarm mode.- EN 15 -
Tap to set time and alarm. Press and hold to turn on alarm mode.
12. Touch button indicator light
Tap this button to turn on/o the charging indicator light of the compatible mobile phone.
15. Backup battery compartment
Remove insulation strip before use. Operation
1. Plug the mains adapter into the mains socket and the Type-C connection to the Type-C
interface on the wireless charger.
2. Once the appliance is connected, the indicator light ashes quickly and then turns o.
The time display lights up. IMPORTANT: DO NOT USE THIS MAINS ADAPTER WITH OTHER APPLIANCES.
WARNING: Do not place any coins and/or metal objects in the wireless charging area
to avoid any eect on the metal objects from overheat. Recharge your mobile phone
1. Place your compatible device in the centre of the wireless charging zone for compatible
2. The charging indicator light comes on when your phone is charging.
3. The charging indicator ashes if your device has not been placed correctly on the
4. When charging is complete, the indicator turns o.
Note: If you disable the indicator light function, the indicator will not light up. The iPhone 8 does not turn o the wireless charging indicator light when fully charged. Charge your earphones wirelessly
1. Place your TWS earphones in the centre of the wireless charging zone for wireless
2. Check the charging status using the indicator on your device.
3. Various brands of wireless earphones with a wireless charging function can be charged on
this area. Charge your smart watch
1. Place your watch in the centre of the wireless charging zone for smart watch.
2. The watch face lights up to show that it is charging.
1. The clock/alarm clock display selection is aided by some small icons.
2. Press and hold the UP button for more than 3 seconds to activate the alarm function. The
alarm icon lights up. Press and hold the DOWN button for more than 3 seconds to turn o the alarm function.
3. The appliance is in clock mode by default when turned on, and the time icon lights up.- EN 16 -
Setting the alarm Press and hold the MODE button for more than 2 seconds. The alarm clock icon and the hours start ashing. Press the UP and DOWN buttons to increase or decrease the hours, and tap the MODE button to set the minutes. The minutes start ashing. Press the UP or DOWN buttons to increase or decrease the minutes; Tap the MODE button to save the alarm setting and switch to the time display. The last alarm setting will be used. When the alarm sounds, press any function button to silence it. If you do not press any button, the alarm will automatically stop after 15 minutes. Note: this appliance does not have SNOOZE function The alarm function is triggered every day by default. Press the DOWN button for more than 3 seconds to turn o the alarm clock function, and the alarm clock icon will turn o. Press and hold the UP button to activate the alarm clock function, and the alarm clock icon will light up. Time setting Press and hold the MODE button for more than 5 seconds. The clock icon and the hours start ashing. Press the UP and DOWN buttons to increase or decrease the hours, and tap the MODE button to set the minutes. The minutes start ashing. Press the UP or DOWN buttons to increase or decrease the minutes; Tap the MODE button to display the time Note: The product only used the 24-hour format. Specifications Model number: CL750I Power supply: DC 9V/2.7A Type-C Wireless output for mobile phone: 5W/7.5W/10W Wireless output for earphone: 5 W Wireless output for watch: 2.5 W USB output: DC 5V/1A Conversion eciency: 80 % - 85 % Alarm clock backup battery: 1 x CR2032 3V Product dimensions (folding): 169 x 75 x 57mm- EN 17 - Note: The wireless charging function only works with compatible devices. This product uses a CR2032 backup battery for the clock. When replacing the battery, do not unplug from the mains power, otherwise the clock/alarm clock settings will be lost. To remove the battery, remove the locking screw and turn the cover anticlockwise to access the battery. Remove the battery and replace it with a battery of the same type (CR2032). The printed side of the battery should be facing you. Replace the cover, turn it clockwise and reattach the locking screw. Every two years, check that the battery is still working. Important points
- Do not use or store the product in direct sunlight or in extreme high temperatures for extended periods.
- Do not charge in close proximity to magnetic cards, magnetic recording media and precision instruments.
- Do not disassemble or modify this product.
- Do not touch the mains adapter with wet hands.
- Keep this product away from water or other liquids.
- To clean the product, disconnect the power supply.
- Ambient temperature range for operating the product: -20 to 45°C
- Warning: do not use the adapter with other products. Warning about batteries This product contains one or more batteries.
- Use batteries correctly to prevent any injury or re caused by a leak, overheating, explosion, erosion or other damage.
- Keep new and used batteries out of the reach of children or any vulnerable person. Stop using the product if the battery compartment does not close properly.
- If the liquid from an alkaline battery comes into contact with the skin and/or eyes, rinse immediately with fresh water and consult a physician.
- If an alkaline battery leaks, wipe up the liquid with a cloth and replace the battery with a new one.
- Do not swallow the battery/ies. If swallowed, a battery can cause severe internal burns in 2 hours and can cause death. If batteries are swallowed, contact a poison centre immediately and consult a physician.
- Use AA Ni-MH, alkaline or lithium batteries.
- Do not charge these batteries. Charging non-rechargeable batteries causes gas and/or heat emissions that can cause explosions and/or res.
- Do not use dierent types of battery or a mixture of new and old batteries at the same time.
- Insert the batteries according to the correct polarity (+ and -).
- Do not put the same battery poles in contact with each other.
- Remove dead batteries quickly. There is a risk of the battery exploding if this is not replaced correctly or if the appliance is not used for a period of time.
- Replace the battery with an identical or equivalent model.- EN 18 -
- The batteries (or battery pack) mu not be exposed to excessive heat, such as sunlight, re, etc.
- Do not heat batteries and do not dispose of them in re or water.
- Do not use metal pliers or metal objects such as the point of a pen or tweezers to remove batteries. Avoid deforming, crushing or piercing batteries.
- Do not disassemble the batteries.
- Cover the ends of the batteries with tape to prevent explosions and combuion when these need to be scrapped.
- Be environmentally friendly when scrapping batteries
- Do not dispose of batteries in ordinary household wae.
- When scrapping batteries, be sure to comply with the local regulations in force in this matter. BATTERY WARNING
KEEP OUT OF REACH OF CHILDREN
Swallowing can lead to chemical burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion. Seek medical attention imme- diately. Care of the environment Your product has been designed and manufactured using high-quality materials and components that can be recycled and reused. Attention should be drawn to the environmental aspects of battery disposal. When this crossed-out wheelie bin symbol is applied to a product, it means that the product is covered by European Directive 2002/96/EC. Please nd out about the local separate collection syem for electrical and electronic products. Please act according to your local rules and do not dispose of your old products in your household wae. By ensuring this product is disposed of correctly, you are also helping to prevent potentially negative consequences for the environment and human health. Additional information
- THOMSON is a trademark of Talisman Brands, Inc. used under licence by Bigben Interactive.
- This product is manufactured and sold under the responsibility of Bigben Interactive.
- THOMSON and the THOMSON logo are trademarks operated under licence by Bigben Interactive – for more information: www.thomson-brand.com.
- All other products, services, corporate names, trademarks, trade names, product names and logos referenced herein are the property of their respective owners.- EN 19 - Declaration of conformity
- Bigben Interactive hereby declares that the CL750I type radio equipment complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.bigben-interactive.co.uk/support/ Warranty This product is guaranteed by Bigben for a period of 2 years from the date of purchase, except in countries of the European Economic Area, which oer a longer warranty period. We recommend that you keep your receipt for any claims. The warranty covers breakdowns due to defective material, a missing element or manufacturing defect. In this case, contact our technical support. For any problem with a defective product, contact your point of purchase with your receipt. The warranty does not cover problems of improper use. Support www.bigben-interactive.co.uk/support support@bigben.fr Made in China Manufactured by BIGBEN INTERACTIVE SA 396, Rue de la Voyette CRT2 – FRETIN CS 90414 59814 LESQUIN Cedex - France www.bigben.eu
This product can be recycled TO DROP
EasyManual