EMDIN02 - Multimeter VELLEMAN - Free user manual and instructions

Product type	Single-phase electrical energy meter for DIN rail
Brand	Velleman
Model	EMDIN02
Dimensions (approx.)	2 DIN modules (36 x 90 x 60 mm)
Weight (approx.)	100 g
Power supply	230 V AC, 50/60 Hz
Rated / maximum current	5 A (Ib) / 80 A (Imax)
Accuracy	Class 1.0 (IEC 62053-21)
Display	LCD 5+1 digits, 99999.99 kWh max
Self-consumption	≤ 0.4 W / 8 VA
Pulse output	1000 imp/kWh, 12-27 V, 27 mA, pulse width 90 ms
LED indicator	1 flash per pulse
Temperature range	-20 °C to 65 °C
Operating altitude	2000 m max
Overvoltage category	III
Protection class	Class II (double insulation)
Use	Indoor only
Mounting	On DIN rail (35 mm)
Reset	Via infrared eye (hold for 3-12 s)
Connections	Terminals 20-21: pulse output; 23-24: not used
Maintenance	Clean with a dry cloth; installation and maintenance must be carried out by a qualified technician
Safety	Follow safety instructions; suitable for children >8 years under supervision
Spare parts / repairability	Any repairs must be carried out by a qualified technician; use only original accessories
Warranty	24 months (general public); 6 months (professional use)

Frequently Asked Questions - EMDIN02 VELLEMAN

How to install the EMDIN02 meter?

Install the meter on a standard DIN rail (35 mm). Connect the wires according to the diagram provided on page 1 of the manual. Respect the nominal voltage of 230 V AC and the maximum current of 80 A. Have the installation carried out by a qualified technician.

How to reset the meter?

Hold your finger on the infrared eye (RESET) for 3 to 12 seconds. The upper row resets to zero; the lower row retains the cumulative total.

What does the two-row display mean?

The upper row shows the partial consumption (resettable). The lower row shows the total general consumption in kWh, non-resettable.

What is the operating voltage and current?

Nominal voltage: 230 V AC (50/60 Hz). Base current (Ib): 5 A; maximum current (Imax): 80 A. The most accurate measurement occurs at 5 A.

How to interpret the pulse output?

The pulse output delivers 1000 pulses per kWh. Output voltage: 12 to 27 V, max current 27 mA, pulse width 90 ms. An LED flashes with each pulse.

Can I use this meter for three-phase?

No, this meter is single-phase only. It measures active energy on a 230 V AC network between phase and neutral.

What is the accuracy class of this meter?

The meter is class 1.0 according to IEC 62053-21. It offers an accuracy of ±1% for active power measurements.

What is the self-consumption of the meter?

The self-consumption is very low: ≤ 0.4 W (8 VA). This allows operation without any significant impact on the electricity bill.

How to clean and maintain the meter?

Clean the device with a dry, non-abrasive cloth. Do not use liquids. Maintenance must be carried out by a qualified technician. Do not open the housing.

What to do in case of malfunction?

Check the connections and wiring. If the problem persists, contact your dealer. Any repairs must be carried out by an authorized professional. The warranty covers manufacturing defects (24 months for domestic use).

USER MANUAL EMDIN02 VELLEMAN

USER MANUAL 2

GEBRUIKERSHANDLEIDING 5

MODE D'EMPLOI 8

MANUAL DEL USUARIO 11

To all residents of the European Union Important environmental information about this product

Simple line drawing of a trash bin with crossed lines indicating no waste or discharge (no text or symbols)

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling

service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.

Safety instructions

Read and understand this manual and all safety signs before using this appliance.

Class II equipment.

For indoor use only.

Overvoltage category III.

- This device can be used by children aged from 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved. Children shall not

EMDIN02

play with the device. Cleaning and user maintenance shall not be made by children without supervision.

• A qualified technician should install and service this device.
• The measurements provided by this device are for information purposes only.

Description

Refer to the illustrations on page 1 of this manual.

This single phase DIN rail kWh meter is a new generation of single phase electronic watt-hour meters, adopting micro-electronic techniques, LSI circuits and advanced digital and SMT techniques. The meter is in conformity with the relevant technical requirements of Class 1, Class 2 and IEC62052-11, IEC62053-21. It accurately and directly measures 50/60 Hz active energy consumption from single phase AC electricity net.

Installation

This device must be mounted on a DIN-rail.

Interconnection to accessories and other equipment

Direct type, no interconnection to other equipment.

Reset

To reset the device, keep your finger on the infrared eye (marked Reset) for 3 to 12 seconds.

The upper row will reset to zero.

The lower row shows the total of kW/h permanently.

Connections

Refer to the illustrations on page 1 of this manual.

• 20-21: counter outputs (see technical specifications for details)
• 23-24: not used

Technical Specifications

voltage	230 V
current	5 (80) A ^(1)
accuracy class	1.0
frequency	50/60 Hz
display mode	LCD 5+1 = 99999.99 kWh
power consumption	≤ 0.4 W (8 VA)

EMDIN02

temperature range	-20 to 65°C
max. operating altitude	2000 m
LED indicator	1 blink per pulse
pulse output	1000 imp/kWh
	voltage: 12 to 27 V
	current: 27 mA
	impulse width: 90 ms

(1) 5(80)A: 5 (Ib = 5 A) and (80) I = 80 A .

The internal measurement always happens at 5 A (Ib), this via an internal voltage divider. For example, a live current of 16 or 20 A flows through the circuit. The max current for this kwh meter may be 80 A (I max).

Note: the most accurate measurement for these kWh meter, is by a live current of 5 A through the circuit.

Use this device with original accessories only. Velleman Group nv cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website www.velleman.eu. The information in this manual is subject to change without prior notice.

© COPYRIGHT NOTICE

The copyright to this manual is owned by Velleman Group nv. All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior written consent of the copyright holder.

GEBRUIKERSHANDLEIDING

EENFASIGE - DUBBELE kWh-METER VOOR DIN-RAIL MONTAGE

Simple line drawing of a trash bin with crossed lines indicating no waste or discharge (no text or symbols)

Simple line drawing of a trash bin with crossed lines indicating no waste or discharge (no text or symbols)

Simple line drawing of a trash bin with crossed lines indicating no waste or discharge (no text or symbols)

Simple line drawing of a trash bin with two crossed lines and a blank bottom bar (no text or symbols)

(1) 5(80)A: 5 (Ib = 5 A) oraz (80) I maks. = 80 A.

© INFORMACJA O PRAWACH WŁASNOŚCI

Velleman® Service and Quality Warranty

Since its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries.

All our products fulfil strict quality requirements and legal stipulations in the EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organisations. If, all precautionary measures notwithstanding, problems should occur, please make appeal to our warranty (see guarantee conditions).

General Warranty Conditions Concerning Consumer Products (for EU):

• All consumer products are subject to a 24-month warranty on production flaws and defective material as from the original date of purchase.
• Velleman® can decide to replace an article with an equivalent article, or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion.

You will be delivered a replacing article or a refund at the value of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.

• Not covered by warranty:

• all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity...), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits;
• consumable goods, parts or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, non-rechargeable, built-in or replaceable), lamps, rubber parts, drive belts... (unlimited list);

• flaws resulting from fire, water damage, lightning, accident, natural disaster, etc....;

• flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, abusive use or use contrary to the manufacturer's instructions;

• damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally);
• damage resulting from an inappropriate packing and shipping of the article;
• all damage caused by modification, repair or alteration performed by a third party without written permission by Velleman®.
• Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.
• Hint: In order to save on cost and time, please reread the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.
  • Repairs occurring after warranty expiration are subject to shipping costs.
• The above conditions are without prejudice to all commercial warranties.

The above enumeration is subject to modification according to the article (see article's manual).

NL