HPBT5054BK - Earplug NEDIS - Free user manual and instructions

USER MANUAL HPBT5054BK NEDIS

Quick start guide Fully Wireless Earphones HPBT5054BK For more information see the extended manual online: ned.is/hpbt5054bk Intended use The Nedis HPBT5054BK is a pair of fully wireless earphones. The product can be paired with any Bluetooth enabled audio/ video device. The earphones can be charged up to 4 times in the fully charged case. Any modication of the product may have consequences for safety, warranty and proper functioning. Specications Product Fully Wireless Earphones Article number HPBT5054BK Power input 5 VDC ; 1.0 A Bluetooth® version 5.0 Bluetooth® frequency range 2402 - 2480 MHz Frequency response 20 Hz - 20 KHz Max. radio transmit power 4 dBm Impedance 16 Ω Driver size 10 mm Voice control Siri, Google Assistant Battery type Lithium-Ion (earphones) Lithium-Polymer (charging case) Charging time Up to 2 hours Case recharges Up to 4 times Battery capacity earphones 2 x 40 mAh Battery capacity charging case 400 mAh Play time (at 50% volume) Up to 3 hours Touch control Yes5 Main parts (image A)

Charging indicator LED

Left earphone touch control

Right earphone touch control

WARNING To prevent possible hearing damage, do not listen at high volume levels for long periods.

• Only use the product as described in this manual.

• Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.

• Do not expose the product to direct sunlight, naked ames or heat.

• Do not expose the product to water or moisture.

• Do not drop the product and avoid bumping.

• Do not open the product.

• Keep the product out of reach from children.

• This product is not a toy. Never allow children or pets to play with this product.

• Using earphones with both ears covered while participating in trac is discouraged and may be illegal in some areas.

• Charge the battery for at least 2 hours when you use it for the rst time.

• Only use the provided USB charging cable.

• Some wireless products may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants and hearing aids. Consult the manufacturer of your medical equipment for more information.

• Do not use the product at locations where the use of wireless devices is prohibited due to potential interference with other electronic devices, which may cause safety hazards.

• This product is equipped with a non-removable internal battery. Do not attempt to replace the battery yourself.6

• Do not short circuit.

• Do not repair the product. If damaged, it must be properly disposed of.

• Only use the product as described in this manual. Pairing the earphones to a Bluetooth audio source

1. Take the earphones out of the charging case. The earphones

switch on automatically.

Tap and hold both earphone touch controls A

for 2 seconds to manually switch on the earphones.

starts blinking to indicate pairing mode is active.

3. Enable Bluetooth on the device you want to pair the

4. Select "HPBT5054BK" from the list of available Bluetooth

devices on your device. Charging the product (image B)

into the USB-C port A

of the charging case.

2. The charging indicator LED A

indicates the charging progress of the battery.

3. Place the earphones into the respective slots A

to charge the earphones.

The earphones and the charging case can charge simultaneously. Switching on the product

for 2 seconds to switch the product on or o.

for 4 seconds to manually switch o the product. Making phone calls With the earphones connected to a mobile phone via Bluetooth, phone calls will automatically be redirected to the earphones.

• To answer an incoming call, tap A

• To reject an incoming call, tap and hold A

Controlling the music

to play or pause the music.

to skip to the previous track.

to skip to the next track.7 Activating voice assistant

• Tap and hold A or A for 1.5 seconds to activate Siri/Google Assistant. Restore to default settings

1. Switch on the earphones.2. Quickly tap A

and A ve times.3. Switch o both earphones. This function is suggested to be used when the earphones cannot connect to each other under the conditions of common use. Declaration of Conformity We, Nedis B.V. declare as manufacturer that the product HPBT5054BK from our brand Nedis , produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via:nedis.com/hpbt5054bk#supportFor additional information regarding the compliance, contact the customer service:Web: www.nedis.comE-mail: [e-mail] B.V., de Tweeling 285215 MC ’s-Hertogenbosch, the Netherlands