SSFM 35 A1 - Uncategorized SILVERCREST - Free user manual and instructions

USER MANUAL SSFM 35 A1 SILVERCREST

YOURSELF WITH ALL OF

THE SAFETY INFORMATION

AND INSTRUCTIONS FOR

USE! WHEN PASSING THIS

PRODUCT ON TO OTHERS,

PLEASE ALSO INCLUDE ALL

THE DOCUMENTS! In the case of damage resulting from non-compliance with these operating instructions the warranty claim becomes invalid! No liability is accepted for consequential damage! In the case of material damage or personal injury caused by incorrect handling or non-compliance with the safety instructions, no liability is accepted!17GB/IE Children and persons with disabilities

OF LIFE OR ACCIDENT TO

INFANTS AND CHILDREN! Never leave children unsupervised with the packaging material. The packaging material represents a danger of suffocation. Children frequently underestimate the dangers. Always keep children away from the packaging material. This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance must not be performed by children without supervision.

CAUTION! The product has a heated surface. Persons insensitive to heat must be careful when using the product. Intended use

WARNING! Misuse may lead to injury. Use this product solely in accordance with these instructions. Do not attempt to modify the product in any way. Electrical safety DANGER! Risk of electric shock! Never attempt to repair the product yourself. In case of malfunction, repairs are to be conducted by qualified personnel only.18 GB/IE WARNING! Risk of electric shock! Do not immerse the product’s electrical components in water or other liquids. Never hold the product under running water. WARNING! Risk of electric shock! Never use a damaged product. Disconnect the product from the power supply and contact your retailer if it is damaged. Regularly check the power plug and the supply cord for damages. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Ensure the rated voltage shown on the rating label corresponds with the voltage of the power supply. Do not insert needles or pointed objects into the massage surface. Use

WARNING! Risk of injury! Turn off the product and disconnect it from the mains before cleaning and when the product is not in use. The product must be used and rested on a flat, stable surface. The product is not to be used if it has been dropped, or if there are visible signs of damage. Do not operate the product with a damaged power cord or plug, when the product malfunctions or has been damaged in any manner. Only use the product in dry indoor rooms. Do not use the product with wet feet or while the product is standing on a wet floor. Do not touch the power plug with wet hands.19GB/IE Protect the product against heat. Do not place the product close to open flames or heat sources such as stoves or heating appliances. Protect the power cord against damages. Ensure that nobody can pull on or trip over it unintentionally. Do not pull the power plug out of the power outlet by the power cord. Do not wrap the power cord around the product. Protect the product, its power cord and power plug against dust, direct sunlight, dripping and splashing water. Store the product in a cool, dry place, protected from moisture and out of the reach of children. Before first use Remove the packing materials. Operation

CAUTION! Risk of injury! Do not press any parts of the body, especially fingers, between the rotating massage heads [1] and their holders in the product. NOTES: Never stand on the product. Do not use the product for more than 15 minutes. Prolonged use may cause over stimulation of muscles, leading to tension. Do not use the product on swollen, burnt, inflamed, diseased or injured skin areas. Always remove your shoes before use. Use the product only with dry and clean feet. The heat function can only be switched on, if the massage function is switched on. The product switches off automatically after 15 minutes. Let the product cool down before switching it on again. Setting up the product Unroll the power cord [5] from the power cord storage [6]. For an optimal massage position, the rear feet [4] can be adjusted. Place the product on a flat surface with the massage surface [1] facing downwards. Rotate the feet [4] as follows to adjust the foot height: Direction of rotation Foot height Clockwise Increasing Counter-clockwise Decreasing Place the product on a flat surface. Slippage of the product is prevented by the rubber feet [4] on the bottom of the product. If necessary, place the product on a mat to protect the floor. Check the stability of the product.20 GB/IE Use massage and heat function Setting Massage level Heat function button [2] 1 Slow On Lights green 2 Slow Off Flashes green 3 Fast On Lights blue 4 Fast Off Flashes blue Connect the power plug [5] to a power outlet. Switching on the product: – Press the button [3]. – The indicator light of the button [3] lights up red. – The massage heads [1] rotate slowly. – The heat function is switched on. – The left indicator light of the button [2] lights up green. – The product is set to massage level 1. Assume a comfortable sitting posture. Place your feet on the massage heads [1]. This product is equipped with 2 adjustable massage levels, each with a switchable heat function (see table). Change settings: Press the button [2] again. Each time you press the button [2], the setting increases: Setting 1 Setting 2 Setting 3 Setting 4 One of the indicator lights of the button [2] lights up or flashes, depending on the selected setting: Setting 1 or 2: Left indicator lights/flashes green Setting 3 or 4: Right indicator lights/flashes blue [2] [3] Switching off the product NOTE: The product is equipped with a temperature sensor. When the temperature reaches a certain level, the heat function switches off temporarily. The heat function switches on again when the product has cooled. Switching off the product: – Press the button [3]. – The massage heads [1] no longer rotate. – The indicator lights of the [3] and buttons [2] go off. Switching off the product completely: Unplug the power plug [5] from the power outlet.21GB/IE Troubleshooting Problem Cause Solution Massage heads [1] rotate slowly. Pressure on massage heads [1] is too strong. Remove pressure from massage heads [1]. Massage heads [1] do not move. Power plug [5] is not connected to a power outlet. Connect the power plug [5] with a power outlet. Switch on the product. Cleaning and care

DANGER! Risk of electric shock! Before cleaning or maintaining the product: Disconnect the power plug [5] from the power outlet.

WAARSCHUWING! LEVENSGEVAAR EN

TRANSFIERE ESTE PRODUCTO,