HG05693 - LED Bulb Livarno Lux - Free user manual and instructions

Product type	LED color-changing bulb
Brand	Livarno Lux
Model	HG05693
Socket	E27
Supply voltage	230 V~ 50 Hz
Power consumption	approx. 9 W, max. 78 mA
Power equivalence	Over 60 W (incandescent)
Dimensions	approx. 60 × 116 mm
Weight	approx. 48 g
Lifespan	30,000 h
Switching cycles	≥ 100,000
Warm-up time	< 1 s (up to 60% of full power)
Functions	Color selection, color changing (FLASH, STROBE, FADE, SMOOTH), brightness adjustment (5 levels), speed adjustment (5 levels)
Remote control	Infrared, CR2025 battery included
Package contents	1 LED bulb, 1 remote control, 1 CR2025 battery, 1 instruction manual
Usage	Dry indoor, not compatible with dimmer
Maintenance	Clean with a dry, lint-free cloth
Safety	Unplug before cleaning, do not immerse, keep out of reach of children
Customer service	0800 919270 (France), [e-mail]

Frequently Asked Questions - HG05693 Livarno Lux

How to change the color of the bulb?

Use the remote control to select a color by pressing one of the color buttons or the W button for white. You can also choose automatic color-changing modes (FLASH, STROBE, FADE, SMOOTH).

How to use the remote control?

Remove the insulating strip from the battery (CR2025) before first use. The remote control works via infrared, point it at the bulb without obstacles. The buttons allow you to choose colors, modes, brightness, and speed.

What to do if the remote control stops responding?

First check the battery: replace it with a CR2025 battery, respecting polarity. Ensure no obstacle is between the remote and the bulb. If the problem persists, contact customer service.

Is the bulb dimmable?

No, the bulb is not compatible with a dimmer. It should only be used with a mains voltage of 230 V~ 50 Hz without a dimmer.

What is the lifespan of the bulb?

The nominal lifespan is 30,000 hours. The number of switching cycles is at least 100,000.

How to clean the bulb?

Before cleaning, unscrew the bulb from the socket and use a dry, lint-free cloth. Never use water or liquids.

Can I use this bulb outdoors?

No, the bulb is exclusively for indoor use in dry, closed spaces. It is not suitable for dusty or humid environments.

What to do in case of malfunction?

Check the mains voltage and socket compatibility. If the bulb does not light, try removing and reinserting the remote control battery. If the problem persists, contact customer service at 0800 919270 (France) or by email at [e-mail].

How to replace the remote control battery?

Open the battery compartment, remove the old battery and insert a new CR2025 battery, respecting the indicated polarity (+/-).

Does the bulb consume energy when off?

Yes, as long as it is screwed into a live socket, it consumes a small amount of energy. To turn it off completely, remove it from the socket or switch off the lamp's switch.

USER MANUAL HG05693 Livarno Lux

LED COLOUR CHANGING BULB

Operation and safety notes

NL BE

LED-LAMP MET KLEUREFFECT

GB/IEOperation and safety notesPage 14

A WARNING! STROMSCHLAGGEFAHRI!

List of pictograms used

Introduction

Intended use Page 16

Parts description.. Page 16

Technical data.. Page 16

Scope of delivery.

General safety instructions

Safety instructions for batteries/rechargeable batteries Page 18

Start-up Page 19

Operation

Selecting the light colour . Page 19

Color changing mode.. Page 20

Switching off.. Page 20

Changing the battery

Cleaning and care

Disposal

Service

List of pictograms used
	Direct current Alternating current
	Not dimmable	LIGHT 9W>60W	Product rated wattage equivalent to traditional incandescent lamp rated wattage
	Uses up to 80% less energy compared to a standard bulb	LED=30xT(h) 30000 h	Nominal life time of the product
	Number of switching cycles before premature failure	<1s=60%	Warm-up time up to 60% of the full light output is less than 1 second
	Ambient temperature Lamp socket	E27
	Disconnect from the mains before installing the product	%	The product not suitable for use under dust and moisture.

LED Colour Changing Bulb

Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product. The instructions for use are part of the product. They contain important information

concerning safety, use and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use. Only use the product as described and for the specified applications. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

Intended use

This product is intended for use indoors only, in dry and enclosed rooms. This product is not intended for commercial use or for use in other applications.

- Parts description

1 Lamp
2 Remote control
3 button
4 button
5 OFF button
6 ON button
7 W button
8 FLASH button
9|STROBE button
10FADE button
11 SMOOTH button
12 Colour buttons
13 Battery compartment
14 Infrared diode
15 Battery holder
16 Battery

Technical data

LED Colour Changing Bulb

Operating voltage: 230V 50Hz

Power input: approx. 9 W,

max. 78mA

Lamp socket: E27

Dimensions: approx. 60 × 116 mm

Weight: approx. 48 g

Remote control

Voltage: 1 × 3V

一

Signal type: infrared lamp 940 nm

Range: max. 5m

GS certified

- Scope of delivery

1 LED Colour Changing Bulb
1 Infrared remote control
1 CR2025 button cell (inserted)
1 Set of instructions for use

General safety instructions

Before using the product, please familiarise yourself with all of the safety information and instructions for use! When passing this product on to others, please also include all the documents!

DAI R/ARNING! TO LIFE AND RISK OF ACCIDENTS FOR INFANTS AND

CHILDREN!

This product may be used by children age 8 years and up, as well as by persons with reduced physical, sensory or mental capacities, or lacking experience and / or knowledge provided they are supervised or instructed in the safe use of this product and understand the associated risks. Children should not be allowed to play with the product. Cleaning and user maintenance should not be performed by children without supervision.

Avoid the danger of death from electric shock!

Before using this product, verify the available mains voltage corresponds with the required operating voltage of the product (230V)

Do not use the product if you detect any kind of damage.

The product contains delicate electronic components. This means that if it is placed near an object that transmits radio signals, it could cause interference. If you experience faults, remove such equipment from the vicinity of the product.

Never allow the product to come into contact with water or other liquids.

Only connect the lamp 1 to alternating voltage (230 V~ 50 Hz). Please note the product

is not dimmable.

Use in dry locations only! The product not suitable for use under dust and moisture.

The increased weight may reduce the mechanical stability of certain luminaires and lampholders and may impair contact making and lamp retention.

The LEDs are not replaceable.

If the LEDs fails at the end of their life, the entire product must be replaced.

The product continues to draw a small amount of power even if the product is off as long as product is connected to mains supplied lamp socket (E27). To switch the product off completely, please remove the

product from the lamp socket, or the mains switch of lamp socket should be switched off.

Safetyinstructions for batteries/ rechargeable batteries

DANGER TO LIFE! Keep batteries/ rechargeable batteries out of reach of children. If accidentally swallowed seek immediate medical attention.

DANGER OF EXPLOSION!

Never recharge non-rechargeable batteries. Do not short-circuit

batteries/rechargeable batteries and/or open them. Overheating, fire or bursting can be the result.

Never throw batteries / rechargeable batteries Risk of damage of the product

into fire or water.

Do not exert mechanical loads to batteries / rechargeable batteries.

Risk of leakage of batteries / rechargeable batteries

Avoid extreme environmental conditions and temperatures, which could affect batteries / rechargeable batteries, e.g. radiators / direct sunlight.

If batteries / rechargeable batteries have leaked, avoid contact with skin, eyes and mucous membranes with the chemicals! Flush immediately the affected areas with fresh water and seek medical attention!
Wear PROTECTIVE GLOVES! Leaked or damaged batteries/rechargeable batteries can cause burns on contact with the skin. Wear suitable protective gloves at all times if such an event occurs.
In the event of a leakage of batteries / rechargeable batteries, immediately remove them from the product to prevent damage.
Remove batteries/rechargeable batteries if the product will not be used for a longer period.

Risk of damage of the product

Only use the specified type of battery / rechargeable battery!
Insert batteries/rechargeable batteries according to polarity marks (+) and (-) on the battery / rechargeable battery and the product.

Clean the contacts on the battery / rechargeable battery and in the battery compartment before inserting!

Remove exhausted batteries/rechargeable batteries from the product immediately.

Start-up

LED Colour Changing Bulb

Before first use, screw the included lamp into the E27 socket of a lighting fixture. When doing this, ensure that the lamp 1 is securely seated.

Note: Verify the lighting fixture or lamp socket is disconnected from the mains before installing the product.

Note:The lamp 1 has a weight of approx. 48 g and measures approx. 60 × 116 ~mm . Verify the size of the lamp 1 suitable with the respective lighting fixture before use.

Connect the lam to the mains and switch it on.

Remote control

Before first use, remove the battery insulating strip between the battery 16 and the battery compartment 13 of the remote control 2

Press the ON button on the remote control to switch the product on (Fig. A).

Note:Please note the remote control uses infrared lamp: it does not allow the signal to be transmitted "around the corner" as radio waves do. Light-tight objects may not be located between the diode 14 and the lamp 1.

The lamp will now light up white.

Operation

Select a light colour or different colour change effects using the remote control 2 (Fig. A):

- Selecting the light colour

Press one of the colour button or the W button to select a light colour corresponding with the button.
Press the button to gradually increase the brightness level.
Press the button4 to gradually reduce the brightness level. There are 5 brightness levels.

Color changing mode

FLASH: Press the FLASH button 8 to select a colour change pattern alternating between the basic colours red, green and blue (RGB).

STROBE: Press the STROBE button to select a sophisticated colour changing program: - white light flashes 6 times, then ...

RGB light colours alternate with a "rough" transition, then ...

• 7-colour change with a "rough" transition, then ...

RGB light colours change with a "soft" transition, then ...

• 7-colour change with a "soft" transition.

FADE: Press the FADE button to generate a colour change between 7 colours and a "soft" transition.

SMOOTH: Press the SMOOTH button to generate a colour change between 7 colours and a "soft and slow" transition.

Repeatedly press the button 3 to gradually increase the color changing speed.

Repeatedly press the button4 to gradually reduce the color changing speed.

There are 5 speeds level.

- Switching off

When switching the lamp 1 off, using the OFF button 5 on the remote control 2. When switching the lamp 1 on, using the ON button 6, the last colour or the last selected colour changing mode will be resumed.

However, if the power supply of the lamp 1 was disconnected, for example, switch off by electrical / mechanical switch, or take out the lamp 1 from the lamp socket, etc. Then, even the power resume and the lamp 1 light up again, it will only light up in white color at medium bright level.

- Changing the battery

Change the battery when the range of the remote control 2 noticeably decreases or the lamp 1 no longer responds to the remote control 2 being operated.

To do so, proceed as shown in Figure B.

Only use a battery type CR2025 and note the correct polarity when inserting the battery. This is shown on the back of the remote control 2.

- Cleaning and care

WARNING! DANGER OF ELECTRIC

SHOCK! For electrical safety, never clean the product with water or other liquids, or immerse it in water.

Remove the lamp from the lighting fixture or lamp socket before cleaning it. When doing so, please follow the instructions of the lighting fixture being used.
Clean the lamp and the remote control 2 with a dry, lint-free cloth.

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1-7: plastics/20-22: paper and fibreboard/80-98: composite materials.

The product and packaging materials are recyclable, dispose of it separately for better waste treatment. The Triman logo is valid in France only.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.

Faulty or used batteries / rechargeable batteries must be recycled in accordance with Directive 2006/66/EC and its amendments. Please return the batteries / rechargeable batteries and/or the product to the available collection points.

Environmental damage through incorrect disposal of the batteries/rechargeable batteries!

Batteries / rechargeable batteries may not be disposed of with the usual domestic waste. They may contain toxic heavy metals and are subject to hazardous waste treatment rules and regulations. The chemical symbols for heavy metals are as follows: Cd = cadmium, Hg = mercury, Pb = lead. That is why you should dispose of used batteries / rechargeable batteries at a local collection point

Service

GB Service Great Britain

Tel.: [phone]

E-Mail: [e-mail]

IE Service Ireland

Tel.: [phone]

(0,08 EUR/Min., (peak))

(0,06 EUR / Min., (off peak))

E-Mail: [e-mail]

C

Legendede sptogrammesutilis e..

Introduction

$$ 1 \times 3 V = = = $$

Typedesignal:

Lumièreinfrarouge

940nm

Portée :

max. 5 m

Certificé GS

NOSTE OCHRANNÉ RUKA-

VICE! Vyteklé i poskozené baterie nebo akumátry mohou pri pokožkou zpúsobit jej poleptání. to vchodné rukavice.

NOSTE OCHRANNÉ RUKA-

VICE! Vytečné alebo poskodené
bátéri/akumulátorové bátéri

mózu pri kontakte s pokožkou spôsobit' poleptanie. V takom pripade preto noste vchodné ochranné rukavice.
V priade vytecenia baterei / akumulatorovych baterei ich ihned vyberte z vyrobku,aby ste predisi vzniku skod.
Ak produit dlhsi cas nepouzivate, vyberte z neho baterie / akumulatorové baterie.

Riziko poškodenia produktu

Používajte výhradne uvedeny typ bateri / akumulatorovych bateri!
Vložte batérié / akumulátorové batérié podla oznacenia polarity (+) a (-) na batérii / akumulátorovej batérii a vyrobku.
Pred vlozenim yvčistite kontakty na batérii / akumulátorovej batérii a v priečinku pre batérié!
Vybité bataie/akumulatorovbatierie ihned'vyberte z produktu.