AD Professional R1 USB - TV Antenna MELICONI - Free user manual and instructions
Find the device manual for free AD Professional R1 USB MELICONI in PDF.
| Product type | Amplified indoor TV antenna |
| Brand | Meliconi |
| Model | AD Professional R1 USB |
| Dimensions (antenna only) | 200 × 100 × 24 mm |
| Weight (antenna only) | 150 g |
| Power supply | 5 Vdc / 100 mA via USB cable (included); alternative via decoder +5V or external USB adapter (not included) |
| Power consumption | < 2 W |
| Output impedance | 75 ohms |
| VHF-III gain | 18 dB min |
| UHF gain | 18.5 dB min |
| Amplifier noise figure | 1 dB |
| Receiving standards | TNT HD, DVB-T, DVB-T2 HEVC, DAB+ radio |
| Frequency bands | VHF-III (174-230 MHz) and UHF (470-694 MHz) |
| Anti-interference filters | FM, GSM, 4G, 5G |
| Operating temperature | 5 to 40 °C |
| Allowable humidity | < 85% (non-condensing) |
| Package contents | Antenna with coaxial cable, Jack-USB power cable (1.5 m), instruction manual |
| Warranty | 2 years |
| Usage | Indoor only |
| Maintenance and cleaning | Clean with a dry, soft cloth. Do not use abrasive products or solvents. |
| Safety | Do not open the device, do not expose to water or excessive heat sources, keep out of reach of children. |
| Spare parts and repairability | The external USB adapter is not provided. Do not attempt to repair yourself; contact after-sales service in case of malfunction. |
| General information | Compliant with EU directives 2014/53/EU (RED) and 2011/65/EU + 2015/863 (RoHS). Declaration of conformity available at www.meliconi.com/doc/adprofessionarl1 |
Frequently Asked Questions - AD Professional R1 USB MELICONI
User questions about AD Professional R1 USB MELICONI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your TV Antenna in PDF format for free! Find your manual AD Professional R1 USB - MELICONI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AD Professional R1 USB by MELICONI.
USER MANUAL AD Professional R1 USB MELICONI
Antenna in [A]: 5Vdc/50mA
- Directive 2011/65/EU + Delegated Directive 2015/863 (RoHS)
Thank you for choosing MELICONI.
This symbol indicates that these instructions must be read carefully, especially the SafetyWarnings, which must be retained by the user for future reference and passed on to a new user together with the product. Meliconi S.p.A. rules out any liability for injuries or damage caused to persons and/or objects arising from the improper use of the product.
SAFETYWARNINGS
- Only use the product indoors, do not use it outdoors.
- To avoid electric shocks, do not tamper with the device or try to repair it.
- Do not use the product where there is liquid or water, avoid splashes of water or rain, do not pour water on or inside it, do not use with wet hands or in a humid environment and/or where there is condensation.
- The product must not be exposed to sources of excessive heat, such as solar radiation, fire or similar.
- Before making the connections, disconnect the equipment from the electricity grid.
- Never allow children to use electrical products without supervision. This product is not a toy. It may contain small or detachable parts. Make sure that children and pets do not play with the product or the packaging (bags): danger of choking if swallowed.
- Check the product's stability, once the aerial is in place, to prevent it falling and causing damage or harm to persons.
A
Product description
The Meliconi AD PROFESSIONAL R1 USB amplified indoor aerial is able to receive and amplify DVB-T and DVB-T2 digital terrestrial tv signals and DAB+ radio signals on the VHF-III and UHF bands. It also has a low-noise amplifier and special filters to eliminate interference from FM, GSM, 4G and 5G signals.
CONTENT OF THE PACKAGE:
-Aerial
- Power cable (Jack - USB) 1.5 m
- Instruction booklet
B
Installation
(for the connections, please refer to Figures 3 and 4)
- Position the aerial in a favourable location for signal reception, for example, close to a window and or in the direction of the television station, far from metal objects, electrical equipment and reinforced concrete walls that could attenuate the signal, limiting its operation.
- Connect the Meliconi aerial cable [A] to the aerial socket on the television set (or on the digital terrestrial decoder).
- Use the power cable [B] and connect [D] to the socket [C] of the aerial; insert the other end of the power cable [E] to a free USB socket on the television set (or decoder). In this way, the tv (or decoder) will automatically supply power to the aerial only when it is turned on.
- Turn on the device (tv/decoder) and select the desired channel. Check that the front led of the aerial is lit. When the tv (or decoder) is turned off, the aerial (and the led) will usually turn off.
Alternative connections:
If your tv/decoder does not have a free USB socket, it is possible to supply power to the aerial in the following ways:
Power supply from decoder
- If the aerial is connected to a compatible digital terrestrial decoder, it is possible to draw power for the aerial from the decoder, using only the aerial cable [A] (refer to the decoder's Use Manual to enable the 5 Volt/Aerial output). Check that the front led is lit when the decoder is turned on. In this case, when turning off the decoder, the aerial (and the led) automatically turn off.
External power source
- Use a standard 5Vdc/1A USB power unit (not supplied) that complies with applicable safety regulations.
Note: The AD PROFESSIONAL R1 USB aerial does not have a switch. In this configuration, the USB power unit must be disconnected from the socket in order to turn off the aerial
Meliconi S.p.A excludes any kind of responsibility deriving from the power unit.
C
Improving reception
If the quality of the image is unsatisfactory or no signal is received, do the following:
- Check that the aerial is turned on: front led lit
- Point the aerial in different directions until optimal reception has been obtained.
- Look at the aerials on the roofs of nearby buildings and try to point the AD PROFESSIONAL R1 USB aerial in the same direction.
- If possible, it is recommended to carry out the tuning of the channels on the device (tv/ decoder) by connecting it temporarily to a different and valid signal source (for example, a condominium antenna equipment).
Remember that the use of an indoor aerial should always be considered to be an "alternative" solution for the reception of television channels; therefore, due to the intensity of the signals that reach the aerial inside the room, it is possible to obtain more or less satisfactory results, depending on the conditions of use. The best results are obtained when the aerial is positioned close to the window, in the direction of the broadcasting station, without obstacles or buildings in between.
D
SPECIFICATIONS AND TECHNICAL DATA
- Amplified indoor aerial
-
Dimensions and weight (aerial only): 200 × 100 × 24 mm , 150 g
-
Power supply: Power in [C]: 5Vdc/100mA
Aerial in [A]: 5Vdc/50mA
- Reception of digital terrestrial TV (DVB-T/DVB-T2) signals and DAB+ digital radio signals.
- Reception range: VHF-band III (174~230 MHz) and UHF (470~694 MHz).
- Anti-interference filters for FM, 5G, 4G and GSM.
- MMIC noise amplifier figure: = 1 dB
- Gain: VHF-III 18dB min, UHF 18.5 dB min
Consumption: < 2W
Output impedance: 75 Ohm - Temperature of use: 5 40^ C , humidity < 85% (without condensation)
TWO-YEAR WARRANTY - The warranty lapses if the product is tampered with or used improperly. Retain the purchase receipt for any claims on the warranty.
Simplified declaration of EU conformity
The manufacturer, Meliconi SpA, declares that the "AD PROFESSIONAL R1 USB amplified aerial" type of radio equipment is in compliance with the following Directives:
-2014/53/EU (RED)
- Directive 2011/65/EU + Delegated Directive 2015/863 (RoHS)
The full text of the Declaration of EU Conformity is available at the following Internet address: www.meliconi.com/doc/adprofessionarl1
The symbol of the crossed-out rubbish bin displayed on the device indicates that, at the end of its useful life, the product must be collected separately from other waste. The user must, therefore, take the device, at the end of its useful life, to suitable differentiated electrical and electronic waste collection centres or return it to the retailer when buying a new device of an equivalent type. The appropriate differentiated collection will ensure that discarded equipment can subsequently be recycled, treated and disposed of in an environmentally-compatible way. This will help prevent any possible negative effects on the environment and health and will facilitate the recycling of the materials of which the device is composed.
ANTENA DE TV AMPLIFICADA DE INTERIOR
AD PROFESSIONAL R1 USB
INSTRUCCIONES DE USO
Antena in [A]: 5Vdc/50mA
para as conexoes, consultar as Fig. 3, 4
Conexões alternatives:
- Diretiva 2011/65/UE + Delegated Directive 2015/863 (RoHS)
