FP 180 - Paint spray Güde - Free user manual and instructions

USER MANUAL FP 180 Güde

Translation of the original instructions Battery paint spray gun

2,0 Ah 3,0 Ah 4,0 Ah AP 18-20 AP 18-30 AP 18-408

01:10 sec 00:00 sec 00:60 sec

80,9 dB A Measured sound power level L

92 dB A Measured according to EN 60745

; Uncertainty K = 3 dB A

The specied vibration emission value has been measured according to a standardised test procedure and can be used to compare one power tool with another. The specied vibration emission value can also be used for an introductory assessment of the exposure.. Warning The vibration emission value may dier from the specied value during the actual use of the power tool, depending on the way the power tool is used. Try to keep the exposure to the vibrations as low as possible. Steps to reduce vibration exposure include wearing gloves when using the tool and limiting working hours. All parts of the operating cycle must be taken into account (for example, times when the power tool is switched o and times when it is switched on but idling). Read and understand the operating instructions before using the appliance. Familiarise with the control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties. The operator is responsible for accidents or risks to third parties.. In case of any doubts about connection and operation refer please to our customer center Specied Conditions of Use The battery-powered paint spray gun is suitable for all commercially available sprayable paints, varnishes and glazes. Not suitable for wall and latex paints Do not use this product in any other way as stated for normal use.Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages. Residual Risk Even when the device is used properly and all safety regulations are complied with, there still may be some residual risks..

• Hearing damage A longer stay in the immediate vicinity of the running unit may cause hearing damage. Wear ear protectors! Despite the observance of the operating instructions there still may be some hidden residual risks. EN24 ENGLISH Symbols Warning / Caution! Read the operating instructions to reduce the risk of injury. Wear a suitable dust protection mask. Wear goggles. Wear protective gloves. Warning of aerosols hazardous to health. Keep dry at all times. Never expose tool to rain. Keep children and other persons including animals in a safe distance when using the appliance. Protect against cold Safety class III CE marking Any damaged or disposed electric or electro- nic devices must be delivered to appropriate collection centres.. General Power Tool Safety Warnings

WARNING Read all safety warnings and all instructions.Failure to follow the warnings and instructions may result in electric shock, re and/or serious injury. Save all warnings and instructions for future refe

rence. The term „power tool“ in the warnings refers to your mains- operated (corded) power tool or battery-operated (cordless) power tool.

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. b) Do not operate power tools in explosive atmo

spheres, such as in the presence of ammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c) Keep children and bystanders away while opera

ting a power tool.Distractions can cause you to lose control.

2) Electrical safety

a) Do not expose power tools to rain or wet conditi

ons. Water entering a power tool will increase the risk of electric shock. Personal safety a) Stay alert, watch what you are doing and use com

mon sense when operating a power tool. Do not use a power tool while you are tired or under the inuence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. b) Use personal protective equipment. Always wear eye protection. Protectiveequipment such as dust mask, non-skid safety shoes, hard hat, or hearing protec

tionused for appropriate conditions will reduce personal injuries. c) Prevent unintentional starting. Ensure the switch is in the o-position beforeconnecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your nger on the switch or energising power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turn

ing the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewel

lery. Keep your hair, clothingand gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

3) Power tool use and care

a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and o. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the power source and/ or the battery pack from thepower tool before making any adjustments, changing accessories, or storingpower tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) Maintain power tools. Check for misalignment or binding of moving parts,breakage of parts and any other condition that may aect the power tool’soperation. If damaged, have the power tool EN25 ENGLISH repaired before use. Many accidents are caused by poorly maintained power tools. f) Keep cutting tools sharp and clean. Properly main

tained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations dif

ferent from those intended could result in a hazardous situation.

4) Battery tool use and care

a) Recharge only with the charger specied by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of re when used with another battery pack. b) Use power tools only with specically designated battery packs. Use of any other battery packs may create a risk of injury and re. c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a re. d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact acci

dentally occurs, ush with water. If liquid contacts eyes, additionally seek medical help.Liquid ejected from the battery may cause irritation or burns.

a) Have your power tool serviced by a qualied repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Safety instructions for spray guns Ensure a clean and well-lit work area, free from paint or solvent containers, rags and other ammable ma- terials. Possible risk of spontaneous combustion. Keep functional re extinguishers available at all times. Ensure adequate ventilation of the workplace. Evaporating ammable solvents create an explosive environment. Do not spray or clean with materials whose ash point is below 55 °C. Use materials based on water, low volatile hydrocarbons or similar materials. Highly volatile evapo

rating solvents create an explosive environment. Do not spray in the vicinity of ignition sources such as static electricity sparks, open ames, pilot lights, hot objects, motors, cigarettes and sparks from plugging in and unplugging power cables or operating swit

ches. Such sources of sparks can cause ignition of the surrounding area. Do not spray materials that are not known to be hazardous. Unknown materials can create hazardous conditions. Do not spray wallpaper solvent or boiling water. Spray only warm water (max. 55 °C) without chemical additives. Wear additional personal protective equipment such as appropriate protective gloves and protective or respiratory mask when spraying or handling che

micals. Wearing protective equipment for appropriate conditions reduces exposure to hazardous substances. Be aware of any hazards of the spray. Observe the markings on the container or the information provided by the spray manufacturer, including the instruction to use personal protective equipment. Follow the manu

facturer‘s instructions to reduce the risk of re and injury caused by toxins, carcinogens, etc. Keep children and other persons including animals in a safe distance when using the appliance. Children should be supervised in order to ensure that they do not play with the tool. Do not operate the device when persons, especially children or pets are nearby. Additional safety warnings For information on the appropriate thinner (water, paint thinner), refer to the relevant manufacturer‘s instructions for the spraying material. Granular spraying material must not be sprayed, as its sanding eect shortens the service life of the unit. Do not exceed the maximum viscosity value for the unit. The spray material must not be too thick for the spraying process, otherwise the unit may clog. Make sure that the spray material and thinner match. If the wrong thinner is used, lumps will form and clog the unit. Never mix synthetic resin paints with nitro thinner. Maintenance Take the replaceable battery from the appliance before any extension, cleaning and servicing works. Repairs and works specied in these instructions may only be performed by qualied authorised sta. Use only original accessories and original spare parts. Keep the device, in particular the air vents, clean at all times. Never spray water on the device body! Never clean the machine and its components with solvents, ammable or toxic liquids. Us only a damp cloth making. Apply environment-friendly oil to all moving parts. Clean the individual parts of the spray gun after each use. In particular, clean all components in contact with the paint thoroughly. Always clean the spray gun and spray material container with the appropriate thinner (solvent or water) for the spray material used. Wear suitable protective gloves during cleaning work. After each use, spray the spray gun with water. Use a cleaning brush, cleaning needle or cloth to clean the injection unit, nozzle head, nozzles and the spray holes inside. Never use petrol, solvents or cleaners that attack synthetic materials. Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insucient maintenance and care can lead to unforeseen accidents and injuries. If necessary, a list of spare parts can be found at www. guede.com. Machine to be stored in a dry place. EN26 ENGLISH

Disposal Any damaged or disposed devices must be delivered to appropriate collection centres. Transport packaging disposal The packaging protects the machine against damage during transport. Packaging materials are usually chosen based on environment aspects and waste treatment principles and are therefore recyclable. Returning the pa- ckaging into material circulation saves raw materials and reduces waste production. Parts of packagings (e.g. foils, styropor®) can be dangerous for children. Risk of suocation! Keep parts of the packagings out of reach of children and dispose them as soon as possible. Dispose of old oil in an environmentally friendly manner. Guarantee Warranty period of 12 months applies to commercial use and 24 months applies to private use and commences on the day of purchase of the device. The guarantee solely covers inadequacies caused by ma

terial defect or manufacturing defect. Original payment voucher with the sales date needs to be submitted for any claim in the guarantee period. The guarantee does not cover any unauthorised use such as appliance overloading, use of violence, damage as a result of any unauthorised interference or caused by foreign items. Failing to follow the operating and assem

bly instructions and common wear are also not included in the guarantee. Important information for the customer Please note that returns within or outside the warran- ty period should always be in the original packaging. This measure eectively avoids unnecessary trans- port damage and any associated disputed ruling. Your equipment is optimally protected only in the original box, and keeping it in that box will ensure smooth processing. Service Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you and without needles bureaucracy at our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label. Serial No.: Art. No: Year of production: Tel.: +49 (0) 79 04 / 700-360 Fax: +49 (0) 79 04 / 700-51999 Email: support@ts.guede.com27 FRANÇAIS Caractéristiques techniques Pistolet à peinture à batterie FP 18-0 N° de commande 58421 Tension nominale 18 V Volume du réservoir 0,9 l Débit (Eau) 0,7 l/min Taille de buse 2,0 / 2,5 mm Viscosité max. 60 DIN-Sec Dimensions L x l x H 360 x 130 x 300 mm Poids sans accu (net/brut) 1,25 kg / 1,55 kg Données relatives au bruit Niveau de pression acoustique L