FSL18 - Lighting BLACK & DECKER - Free user manual and instructions

USER MANUAL FSL18 BLACK & DECKER

Your Black & Decker flashlight has been designed to provide additional lighting for your DIY jobs. This tool is intended for consumer use only.

Safety instructions

Warning! When using battery-powered tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, leaking batteries, personal injury and material damage.
Read all of this manual carefully before operating the tool.
Retain this manual for future reference.

Keep work area clean

Cluttered areas and benches can cause accidents.

Consider work area environment

Do not expose the tool to rain. Do not use the tool in damp or wet conditions. Keep the work area well lit. Do not use the tool where there is a risk of causing fire or explosion, e.g. in the presence of flammable liquids and gases.

Keep children away

Do not allow children, visitors or animals to come near the work area or to touch the tool.

Dress properly

Do not wear loose clothing or jewellery, as these can be caught in moving parts. Preferably wear rubber gloves and non-slip footwear when working outdoors. Wear protective hair covering to keep long hair out of the way.

Personal protection

Always use safety glasses. Use a face or dust mask whenever the operations may produce dust or flying particles. Hearing protection should be worn.

Do not overreach

Keep proper footing and balance at all times.

Stay alert

Watch what you are doing. Use common sense.

Do not operate the tool when you are tired.

Secure workpiece

Use clamps or a vice to hold the workpiece. It is safer and it frees both hands to operate the tool.

Connect dust extraction equipment

If devices are provided for the connection of dust extraction and collection facilities, ensure that these are connected and properly used.

Remove adjusting keys and wrenches

Always check that adjusting keys and wrenches are removed from the tool before operating the tool.

Use appropriate tool

The intended use is described in this instruction manual. Do not force small tools or attachments to do the job of a heavy-duty tool. The tool will do the job better and safer at the rate for which it was intended. Do not force the tool.

Warning! The use of any accessory or attachment or performance of any operation with this tool other than those recommended in this instruction manual may present a risk of personal injury.

Check for damaged parts

Before use, carefully check the tool for damage. Check for misalignment and seizure of moving parts, breakage of parts, damage to guards and switches and any other conditions that may affect its operation. Ensure that the tool will operate properly and perform its intended function. Do not use the tool if any part is damaged or defective. Do not use the tool if the switch does not turn it on and off. Have any damaged or defective parts repaired or replaced by an authorised repair agent. Never attempt any repairs yourself.

Remove the battery

Where the design permits, remove the battery when the tool is not in use, before changing any parts of the tool, accessories or attachments and before servicing.

Avoid unintentional starting

Do not carry the tool with a finger on the on/off switch. Be sure that the tool is switched off when inserting the battery into the tool.

Do not abuse cord

Never carry the charger by its cord or pull it to disconnect from the socket. Keep the cord away from heat, oil and sharp edges.

Store idle tools

When not in use, tools, batteries and chargers should be stored in a dry, locked up or high place, out of reach of children.

Maintain tools with care

Keep cutting tools sharp and clean for better and safer performance. Follow the instructions for maintenance and changing accessories. Keep handles and switches dry, clean and free from oil and grease.

Repairs

This tool complies with relevant safety requirements. Repairs should only be carried out by qualified persons using original spare parts; otherwise this may result in considerable danger to the user.

Additional safety instructions for batteries and chargers

Batteries

Never attempt to open for any reason.
Do not expose the battery to water.
Do not store in locations where the temperature may exceed 40^
Charge only at ambient temperatures between 4^ and 40^ .
Charge only using the charger provided with the tool.
- When disposing of batteries, follow the instructions given in the section "Protecting the environment".
Under extreme conditions, battery leakage may occur.

ENGLISH

When you notice liquid on the battery, proceed as follows:

• Carefully wipe the liquid off using a cloth.

Avoid skin contact.

• In case of skin or eye contact, follow the instructions below.

Warning! The battery fluid, a 25 - 30% solution of potassium hydroxide, can be harmful. In case of skin contact, immediately rinse with water. Neutralise with a mild acid such as lemon juice or vinegar. In case of eye contact, rinse abundantly with clean water for at least 10 minutes. Consult a physician.

Do not incinerate the battery.
Do not attempt to charge damaged batteries.

Additional safety instructions for flashlights

Never look directly into the light beam.
Do not touch the bulb shortly after using the flashlight, as the bulb may be hot.
Use only the appropriate type of replacement bulbs.

Features

1. On/off switch
2. Carrying strap
3. Battery

Assembly

Fitting and removing the battery (fig. A)

To fit the battery (3), line it up with the receptacle on the tool. Slide the battery into the receptacle and push until the battery snaps into place.
To remove the battery, push the release button (4) while at the same time pulling the battery out of the receptacle.

Use

Switching on and off

To switch the tool on, press the on/off switch (1).
To switch the tool off, press the on/off switch again.

MAINTENANCE

Your Black & Decker tool has been designed to operate over a long period of time with a minimum of maintenance.

Continuous satisfactory operation depends upon proper tool care and regular cleaning.

Your charger does not require any maintenance apart from regular cleaning.

Warning!

Before performing any maintenance on the tool, remove the battery from the tool.
Unplug the charger before cleaning it.

Replacing the bulb (fig. B)

The bulb can be easily replaced.

Warning! Do not touch the bulb shortly after using the flashlight, as the bulb may be hot.

Remove the battery.
Remove the bulb holder (5) by turning counterclockwise.
Remove the bulb (6) by turning it slightly and pulling it out of the bulb fitting.
- Insert a new bulb.
Re-fit the bulb holder.

Protecting the environment

Tools

Black & Decker provides a facility for recycling Black & Decker products and rechargeable batteries once they have reached the end of their working life. This service is provided free of charge. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.

Batteries

Black & Decker batteries can be recharged many times. At the end of their useful life, discard batteries with due care for our environment:

Run the battery down completely, then remove it from the tool.
NiCd and NiMH batteries are recyclable. Take them to any authorised repair agent or a local recycling station. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com.

Technical data

	FSL18
Voltage V	18
Battery cat. no. A18
Bulb part no. 429881-01
Weight (without battery) kg 0.3

Guarantee

Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.

If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Black & Decker guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to ensure minimum inconvenience to the customer unless:

The product has been used for trade, professional or hire purposes;
The product has been subjected to misuse or neglect;
The product has sustained damage through foreign objects, substances or accidents;
Repairs have been attempted by persons other than authorised repair agents or Black & Decker service staff.

To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at:

www.2helpU.com

Please register at our website www.blackanddecker.com to be kept up to date on new products and special offers. Further information on the Black & Decker brand and our range of products is available at www.blackanddecker.com.

DEUTSCH

Tire as chaves de aperto

Utom rackhall for barn

Reservedele / reparationer

Xpnoiunoeite to owoTo epyaaleio

H evdeevyevn xnoaonoinan avapepetai oaeutc tic
oynies xpnoewc. Mn xnoaonoeite epyaia xaunlc
ioxoc n npoothke yia bapiec epyaiec. To epvaiao aac th a
aietoupynei eintuyeotepa kai aophaeotepa eav
xpnoaonoiinthei oupwva me tnnc npodaypapc tou.
Mn copiczte to epyaiaio.

PpOeIoOnoiOn! Too n xpion eApntmuTawn npooNkwv ooo Ka n npayatonoiOn epyaow nou dev ouviotwta otic oonyiec autc ekykuovs kivduvo tpauaioou.

EeYxTe eav to epyaieio aoc exi 6a8e5

Piv ano T xpon, EleyEe npooekTka to epyaeeio yia tuxov Znuec. EleyEe yia tuxov kakn euypapmion kai epioknTwv Kivoumevwepowv, yia eapntmuata nou exouv onaoei, yia Tuxov Znuec otouc npopulaktnpec kai otouc diakontec kai Yevika yia kaote iisouc ouvthekeoi ooniec evexoevewc va empeaaouv m aeitoupyia tou mnxavmaotc. Bbetaeite oTo epyaeeio aeitoupyei kavovikai xnpaonoiietai yia To okonio yia to vtoio npoopiZetai. Mn xnpaonoiite To epyaeeio av kanoio eaptnua tou napouiae I aattwa. Mn xnpaonoiite To epyaeeio, ev o diakontnc dev mnpei va to theeEvtoc n ekto5 aeitoupyiac. Zntne ano Eouaiobotmevo uvepyeo oepic tvv eniokun n tvv AVTKATAOON OAWV TWV φthapewv n elattwpatkwv EApntmuatw. Note mnv enixepnoTe va eniokuadote o idiot to mynxavma.

Apaieote n matapia

Apaepote Tmuatapia otav to epyaieio dex npnoonoeiatal, npotou aaaaTe oonoihnote avtaakto,napekou n Eaptnau tou epyaieiou, kpiiv ano tm ouvtnpnou.

Anopuyetntv tuxia ekkivon Tou epyaieiou

Mn eTapepeTo epyaleio exovacTo dakTuO oac nawo sto diakontm ekivnonc. Beaowte To kata tv siaaywn Tns mntapiaoc, to epyaleio evai oBnoto.

Mny kakouetaipizoeTo kaawdo

Ionte unetaepete to optiOn KpatwTac Tov ano To Kaawio kai mny Tov tpaBate ano To kaawio yia va To ByaTe ano th npiz. PovtiTe TO kaawio va napapevui Akpi a ano 8epoToTa, Adelta kai axunpa akpa.

Фуалуerte Ta epyaiaea aoc oaopaahes hepos

Otav xpnouoiouvtai, ta epyaia, optiotc kal oI mataie npentv a anoekuovtai e npo xwpo, paepia ano ta naia.

SUVnphnoTpe npoeKTikKa ta epyaia

Dealer address Date of purchase

Handleradresse Kaufdatum

Codice postale Postcode

Codigio Codigino postal Postnr.

一 Postnr 一 Postnr 一 Postinumero

Kωδικός

( x - 2x) t - xy^2 = ( x - 2x) f^ t

Name Name Nom Nome Naam Nombre Nome Nnam Navn Navn Nimi Ovoua: Address Adresse Adresse Indirizzo Adres Dirección Morada Adress Adresse Adresse Osoite Δiεuθuvon: Yes Ja Oui Si Ja Si Sim Ja Ja Kyllä Nau No Nein Non Nee No Não Nej Nei Nej Ei Oxι Is this tool your first purchase? Ist把这些 Gerät ein Erstkauf? Est-ce un 1er achat? Questo prodotto è il suo primo acquisto? Is deze machine uw eerste aankoop? Es esta herramenta la prima de este tipo? Esta ferramenta é a sua primeira compra? Är detta ditt Första B&D-verktyg? Er dette ditt Förste B&D verktøy? Er dette dit Förste B&D verktøj? Onko tãma ensimmäinen B&D-

Data protection act: Tick the box if you are

Data protection act. Tick the box for not to receive further information.

not to receive further information. unknowns, falls Six Leaning uniters