TO 2049 - Electric mini oven SEVERIN - Free user manual and instructions

Brand	Severin
Model	TO 2049
Product type	Mini electric oven with cooking plates
Use	Oven heater and cooking plates for baking, grilling, roasting
Cooking plates	2 plates (large and small) with independent controls and indicator light
Mode switch	5 positions: plates only, top heating element, bottom heating element, both, with small plate
Thermostat	3 levels: 1 (simmering), 2 (regular cooking), 3 (pre-cooking and fast roasting)
Interior light	Yes, 15W bulb E14 base replaceable
Included accessories	Grid, baking pan, crumb tray, pan handle
Exterior material	Stainless steel (parts) and other materials
Power supply	220-240 V ~ 50/60 Hz, grounded plug (CE compliant)
Cleaning	Exterior: non-fluffy damp cloth; pan, grid and crumb tray: dishwasher; plates: wipe after use
Safety	Do not touch heating elements or plates, use crumb tray, do not leave unattended, do not use with external timer
Bulb replacement	Unscrew glass plate, turn bulb counterclockwise, replace with 15W E14
Repairability	Repairs by qualified technician only; bulb replacement possible by user
Warranty	2 years against defects in material and workmanship, excluding normal wear and improper use
Usage	Household use only

Frequently Asked Questions - TO 2049 SEVERIN

How to clean the Severin TO 2049 mini oven?

Before cleaning, unplug the appliance and let it cool down. The exterior can be cleaned with a non-fluffy damp cloth. The baking pan, grid, and crumb tray can be washed in the dishwasher. Never use abrasive products or oven cleaning sprays. For the cooking plates, wipe off splashes with a damp cloth after use.

What to do if the oven light does not turn on?

Make sure the appliance is off and unplugged. The bulb is located at the back of the right oven wall, behind a glass plate. Unscrew the top screw, remove the plate, then turn the bulb counterclockwise to remove it. Replace it with a new 15W bulb (E14 base) by turning clockwise. Reinstall the glass plate and tighten the screw.

Can I use an aluminum pan on the cooking plates?

Yes, provided the pan has a flat bottom and is clean and dry on the outside. It is recommended to use pans designed for hotplates. Make sure the pan diameter is at least equal to that of the plate to avoid uneven heat distribution and damage.

How to change the bulb of the Severin TO 2049 oven?

Switch off and unplug the appliance. Remove the glass plate protecting the bulb by unscrewing the top screw. Turn the defective bulb counterclockwise to remove it. Insert a new 15 W bulb (E14 base) by turning clockwise. Replace the glass plate and tighten the screw.

The oven is not heating enough, what to check?

Check that the temperature selector is set to an adequate level (1 to 3) and that the 5-position switch is set to the desired function (heating element(s) activated). Preheat the oven for a few minutes with the heating elements on. Make sure the door is properly closed and the crumb tray is in place.

Can I use baking paper in this mini oven?

It is not recommended to use baking paper if it comes into direct contact with the heating elements as it could burn or ignite. Preferably use the provided baking pan or grid. If using paper, ensure it does not extend beyond the food and is suitable for oven use.

How to grill toasts with the Severin TO 2049?

Place the toasts on the grid in the middle of the oven. Set the switch to the top heating element only (or both). Select a high temperature (position 3). Monitor cooking as the grill is very powerful. Use the handle to open the hot door.

What type of pans to use on the cooking plates?

Only use pans with a flat bottom, clean and dry on the outside. Pans specifically designed for hotplates (slightly concave bottom) are recommended. Avoid dirty pans that can damage the plate. The pan diameter must be at least equal to that of the plate for optimal heat distribution.

Why does a burning smell occur on first use?

This is normal. During first use, manufacturing residues and the protective coating on the plates burn off. Heat the empty oven for 10 minutes with both heating elements, and the plates at maximum power for 3 minutes. Ensure sufficient ventilation. The odor will disappear after a few uses.

Does the Severin TO 2049 turn off automatically?

No, this appliance does not have an automatic shut-off function. It must be turned off manually by setting the switch to the '•' (small dot) position and unplugging it after use. Never leave the appliance operating unattended.

USER MANUAL TO 2049 SEVERIN

Mini cooker with oven and hot-plates

Dear Customer,

Before using the appliance, the user should read the following instructions carefully.

Connection to the mains supply

The appliance should only be connected to an earthed socket installed in accordance with the regulations. Make sure that the supply voltage corresponds to the voltage marked on the rating label of the appliance. This product complies with all binding CE labelling directives.

Familiarisation

1. Small hot-plate
2. Main unit
3. Baking rack
4. Crumb tray
5. Baking tray handle
6. Baking tray
7. Large hot-plate
8. Temperature control knob
   9.5-position switch
9. Indicator lamp
10. Switch for large hot-plate
11. Switch for small hot-plate
12. Power cord with plug
13. Heating element
14. Door

Important safety instructions

• Before the appliance is used, the main body including the power cord and any attachment fitted should be checked thoroughly for any defects. Should the appliance, for instance, have been dropped onto a hard surface, it must no longer be used: even invisible damage may have adverse effects on the operational safety of the appliance.
• This appliance operates at very high temperatures.

Warning: the door as well as the accessible surfaces of the appliance become hot during operation. Burns can occur from touching the hot parts!

• Do not touch the heating elements or hot-plates.
• Always ensure that the crumb tray is properly fitted under the heating elements when using the appliance.
• Overheated oil or fat may tend to ignite. Therefore do not overfill the baking tray.
• Do not leave the appliance unattended while in use.
  The appliance is not intended to be operated by means of an external timer or separate remote-control system
• This appliance is not intended for use by any person (including children) with reduced physical, sensory or mental capabilities, or lacking experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
  Children should be supervised to ensure that they do not play with the appliance.
• Do not position or operate the appliance close to or underneath any wall-cupboards or hanging objects such as curtains or any inflammable materials, and do not position any objects on top of the appliance.
• During operation, the appliance must be placed on a heat-resistant surface, impervious to splashes and stains. Do not position the appliance on or near hot surfaces, open flames or inflammable vapours.
• Do not allow the power cord to touch any hot parts of the appliance.

• Do not let the power cord hang free.
  Always switch off and remove the plug from the wall socket

• after use,

• in cases of malfunction, and

• during cleaning.

• When removing the plug from the wall

socket, never pull on the power cord; always grip the plug itself.

• Caution: Before changing the light bulb in the oven compartment, ensure that the appliance is switched off and disconnected from the power supply. There is otherwise a risk of electric shock.
• No responsibility will be accepted if damage results from improper use, or if these instructions are not complied with.
• This appliance is intended for domestic use only and not for commercial applications.
• In order to comply with safety regulations and to avoid hazards, repairs of electrical appliances must be carried out by qualified personnel, including the replacement of the power cord. If repairs are needed, please send the appliance to one of our customer service departments. The address can be found in the appendix to this manual.

Temperature control

With the temperature control knob, the temperature can be set to the desired level.

5-position switch settings

• (large dot symbol) - both hot-plates enabled
• (small dot symbol) small hot-plate enabled

Upper heating element and small hot-plate enabled
Lower heating elementand small hot-plate enabled
Both upper and lower heating elements and small hot-plate enabled

Before using for the first time

• Clean the appliance (see General care and cleaning) and remove any packing materials completely.
  Before using the appliance for the first time, let the interior heat up for 10 minutes with both heating elements on. A slight smell may be emitted; this is

normal and will only last for a very short time. Ensure sufficient ventilation.

Before using the hot-plates for the first time, let them heat up for approximately 3 minutes at maximum power, while ensuring sufficient ventilation. This will help to 'burn in' the protective coating which safeguards the hot-plates against corrosion. During this process, a slight smell and a little smoke may be emitted. This is normal and will only last for a very short time.

Using the oven compartment

• Pre-heat the oven compartment for several minutes with the door closed, using both heating elements. Set the temperature control knob to the required level.
• With one or both heating elements switched on, the compartment is illuminated by the interior lamp.
• Place the food to be cooked on the baking rack. When cooking food containing fat or moisture, use the baking tray to stop any dripping into the interior of the appliance.
• Close the door and set the temperature control knob to the required level.
• For overhead baking or grilling, either the upper or the upper and lower elements may be selected.
• The switch settings (upper heat/ lower heat) may be changed during the cooking process.
• To interrupt the cooking process temporarily, set the 5-position switch to the '●' position (small dot symbol).
• Always use the door handle to open the hot door after use. When removing the baking tray, use the tray handle provided. To remove the baking rack, an oven cloth must be used. Always place the baking tray on a heat-resistant surface.
• After use, set the 5-position switch to the '●' position (small dot symbol) and remove the plug from the wall socket.

Using the hot-plates

Always place a pot / saucepan on the hot-plate and set the 5-position switch to the '●' position (large dot symbol) before switching on.
- With one or both hot-plates switched on, the indicator lamp is lit.
- Ensure that the pot is clean and dry on the outside. Do not use stain covered or soot pots / saucepans.
- To prevent damage to the hot-plate, only use pots / saucepans with flat bottoms. Most suitable are pots specifically designed for use on electric plates (see picture I).
- Always make sure that the pot / saucepan used is of at least the same diameter as the plate; this minimises the loss of heat and prevents the plate from being damaged as a result of uneven heat distribution.
- After use, set the 5-position switch to the '●' position (small dot symbol) and remove the plug from the wall socket.

Thermostat settings

3: Pre-cooking and quick frying
2: Regular cooking, frying
1: Simmering
Always set the temperature control knob to position '0' after use.

General care and cleaning

• Before cleaning the appliance, ensure it is disconnected from the power supply and has completely cooled down.
• To avoid the risk of electric shock, do not clean the appliance with water and do not immerse it in water.
• Do not use abrasives, harsh cleaning solutions or spray-type oven cleaners.
• The exterior housing and the door may be cleaned with a damp, lint-free cloth.
• To clean the stainless steel areas, only a mild, non-abrasive cleaning agent intended for such sensitive surfaces may be used.
• Do not clean the stainless-steel surfaces

using rough or hard sponges, or those that still contain residue from abrasive cleaning agents.

• The baking tray, rack and crumb tray may be cleaned using hot water and a mild detergent, or in a dish-washer.
• After use, a wet cloth may be used to remove any spills from the plates.
• Following a longer period of use, a special commercially available cleaning agent should be used to treat the plates.

Changing the bulb inside the oven compartment

The bulb is located at the rear of the right-hand side panel behind a glass plate.

• Loosen the upper screw on the glass plate.
• Remove the glass plate.
• Remove the bulb from its socket by turning it anti-clockwise.
• Replace it with a new 15W bulb (socket-type E14).
• Fit the new bulb into the socket by turning it clockwise.
• Replace the glass plate and secure it with the screw.

Disposal

Do not dispose of old or defective appliances in domestic garbage, but only through public collection points.

Guarantee

This product is guaranteed against defects in materials and workmanship for a period of two years from the date of purchase. Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. This guarantee is only valid if the appliance has been used in accordance with the instructions, and provided that it has not been modified, repaired or interfered with by any unauthorised person, or damaged through misuse.

This guarantee naturally does not cover wear and tear, nor breakables such as glass and ceramic items, bulbs etc. If the product fails to operate and needs to be returned, pack it carefully, enclosing your name and address and the reason for return. If within the guarantee period, please also provide the guarantee card and proof of purchase.

Regulator temperature

OTHOCTe Hx Ha NyHKTbI c6opa

CIIeIIHaJIbHOrO Mycopa.

TapaHTn

TapaHTHbI cPOK Ha IIpH6OpbI fHpMbI "Severin" - 2 rOa co dHn Ix npoJaxn. B TeueHHe 3TOr0 BpeMeHN Mbl 6ecIIaTHo yCTpaHm BCE 1eΦcKtB, BO3HKnIe B pe3yJIbTaTe IPOIN3BOJcTBeHHORO 6paka HIN IIpHMHeHn HeKauecTBeHHbIX MaTepeHaIOB. TapaHTn H paCIIpoCtpaHReTc Hn DeΦeKTbI, BO3HKnIe H3-3a HecO6JIIODeHn HNCTpyKlHi NIO 3KCIJIyATAuHN, rpy6oro 6paIIeHn C IIpH6Opom, a TaKxHe Ha 6bIOUHeCg (CTeKJIaHHbIe Kepamueckne) Yactn. TapaHTn aHHyJIpyETc, ecIn IIpH6Op peMOHTnpOBaJCn HE B yKa3aHHbIX HaMn IIyHKtax cepBnCHOrO 06cJIyXHBaHN. KaKne-JIb6 OIOJOIHNTeJIbHbIe rapaHTn IIpoJaBua 3aBOJOM-H3ROTOBHTJeM He IIpHHMaHOCTc.

Czech Republic / Slowak

Republic

ARGO spel. s r.o.

Zihobce 137

CZ 342 01 Sušice

Tel.: [phone]

Fax: [phone]

Narva: CENTRALSERVICE,

Tallinna 6A, tel: [phone]

Haapsalu: Teco KM OÜ,

Jalaka 1A, tel: [phone]

Rakvere: Nirgi Tōnu FIE,

tel: [phone]

Viljandi: Aaber OÜ,

Vabaduse pl. 4, tel: [phone]

Kuressaare: Toomas Teder FIE,

Pikk 1B, tel: [phone]

Kaina: Ilmar Pauk Elektroonika

FIE. Mae2S,

tel: [phone]

Espana

LADY ASSISTANCE, SL

Bahar Administration and

Commercial Center

No.668,7th Floor,Ave.

South Bahar

TEHRAN-IRAN

Tel.: [phone]

e-mail: [e-mail]

Internet: www.iranseverin.com

Italia

via Dino Col 52r-54r-56r,

I-16149 Genova

Green Number: 800240279

Tel.: [phone]

Fax: [phone]

e-mail: [e-mail]

Jordan

F.A. Kettaneh

P.O.Box 485

Amman, 11118, Jordan

Tel: [phone]

e-mail: [e-mail]

Korea

Euko Trading

Namho B/D 3F,194-6

Neungpyeong-Ri

Opo.Eup, Gwangju-Si,

Kyunggi-do

Korea 464892

Tel: [phone]

Fax: [phone]

Service Hotline: [phone]

Latvia

SERVO Ltd.

Mr. Janis Pivovarenoks

Tel: [phone]

[e-mail]

Lebanon

The Right Angle S.A.L.

Boulos Building

Hazmieh-Damascus Highway

P.O.Box 1656-09

BEIRUT, Lebanon

Tel: [phone] and 3

Fax: [phone]

e-mail: [e-mail]

Luxembourg

Ser-Tec

Serbia and Montenegro

tel: [phone]

tel: [phone]

fax: [phone]

Finland

Oy Harry Marcell Ab

Rälssitie 6, PL 63

01511 Vantaa

Tel.: [phone]

Fax: [phone]

Svenska

Rakspecialisten HS

Mollevangsgatan 34

214 20 Malmö

Fax: [phone]

Slovenia

SEVTIS d.o.o.

Smartinska 130

1000 Ljubljana

Tel: [phone]

Fax:[phone]

Slovenská Republika

Ambos

Ambos Slovakia s.r.o.

Surianska cesta 62

94001 Nove Zamky

Tel:[phone]

Fax: [phone]

e-mail: [e-mail]

Stand: 04.2007