ZMDDS 5142S - Fridge ZEROWATT - Free user manual and instructions

USER MANUAL ZMDDS 5142S ZEROWATT

Simple line drawing of a refrigerator with two ovals on the front panel (no text or symbols)

LANGUAGES

Italiano....5

English.... 16

Français....26

Español 36

Deutsch....46

Portuguese....57

Nederlands....68

Ελληνικά 79

Dansk 91

Svenska 101

Suomi....110

Norsk....119

Hrvatski....128

Srpski 138

Češna 148

Polski....157

Slovenščina 168

Slovenský 177

Română....187

Български.... 197

Magyar....208

Русский.... 218

SOMMARIO

Switching on your unit

IN USE

Tips for keeping food perfect in the Fridge

If you're not at home for a long me

ENERGY SAVING

TAKE CARE

Defrosng

Cleaning and Care

REVERSING THE DOOR SWING

TROUBLE SHOOTING

Thank you for purchasing this product.

Before using your refrigerator, please carefully read this instrucon manual in order to maximize its performance. Store all documentaon for subsequent use or for other owners. This product is intended solely for household use or similar applicaons such as:

• the kitchen area for personnel in shops, ofces and other working environments
• on farms, by clientele of hotels, motels and other environments of a residential type
• atbed and breakfasts (B & B)
• for catering services and similar applications not for retail sale.

This appliance must be used only for purposes of storage of food, any other use is considered dangerous and the manufacturer will not be responsible for any omissions. Also, it is recommended that you take note of the warranty conditions. Please, to obtain the best possible performance and trouble free operaon from your appliance it is very important to carefully read these instrucons. Failure to observe these instrucons may invalidate your right to free service during the guarantee period.

SAFETY INFORMATION

This guide contains many important safety informaon. Please, we suggest you keep these instrucons in a safe place for easy reference and a good experience with the appliance.

The refrigerator contains a refrigerant gas (R600a: isobutane) and insulang gas (cyclopentane), with high compatibility with the environment, that are, however, inammable.

Cauon: risk of re

If the refrigerant circuit should be damaged:

● Avoid opening ames and sources of ignition. Thoroughly venlate the room in which the appliance is situated

WARNING!

- Care must be taken while cleaning/carrying the appliance to avoid touching the condenser metal wires at the back of the appliance, as you might injure your ngers

and hands or damage your product.

- This appliance is not designed for stacking with any other appliance. Do not aempt to sit or stand on top of your appliance as it is not designed for such use. You could injure yourself or damage the appliance.

- Make sure that mains cable is not caught under the appliance during and aer carrying/moving the appliance, to avoid the mains cable becoming cut or damaged.

- When posioning your appliance take care not to damage your ooring, pipes, wall coverings etc. Do not move the appliance by pulling by the lid or handle. Do not allow children to play with the appliance or tamper with the controls. Our company declines to accept any liability should the

instrucons not be followed.

- Do not install the appliance in humid, oily or dusty places, nor expose it to direct sunlight and to water.

- Do not install the appliance near heaters or inammable materials.

- If there is a power failure do not open the lid. Frozen food should not be aected if the failure lasts for less than 20 hours. If the failure is longer, then the food should be checked and eaten immediately or cooked and then refrozen.

- If you nd that the lid of the chest freezer is dicult to open just aer you have closed it, don't worry. This is due to the pressure dience which will equalize and allow the lid to be opened normally aer a few minutes.

- Do not connect the appliance to the electricity supply until all packing and transit protectors have been removed.

- Leave to stand for at least 4 hours before switching on to allow compressor oil to sele if transported horizontally.

- This freezer must only be used for its intended purpose (i.e. storing and freezing of edible foodstu).

- Do not store medicine or research materials in the Wine Coolers. When the material that requires a strict control of storage temperatures is to be stored, it is possible that it will deteriorate or an uncontrolled beacon may occur that can cause risks.

- Before performing any operaon, unplug the power cord from the power socket.

- On delivery, check to make sure that the product is not damaged and that all the parts and accessories are in perfect condition.

- If in the refrigeration system a leak is noted, do not touch the wall outlet and do not use open ames. Open the window and let air into the room. Then call a service center to ask for repair.

- Do not use extension cords or adapters.

- Do not excessively pull or fold the power cord or touch the plug with wet hands.

- Do not damage the plug and/or the power cord; this could cause electrical shocks or res.

- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard.

• Do not place or store inammable and highly volale materials such as ether, petrol, LPG, propane gas, aerosol spray cans, adhesives, pure alcohol, etc. These materials may cause an explosion.
• Do not use or store inammable sprays, such as spray paint, near the Wine Coolers. It could cause an explosion or re.
• Do not place objects and/or containers lled with water on the top of the appliance.
• We do not recommend the use of extension leads and mul-way adapters.
• Do not dispose of the appliance on a re. Take care not to damage, the cooling circuit/pipes of the appliance in transportaon and in use. In case of damage do not expose the appliance to re, potenal ignition source

and immediately venlate the room where the appliance is situated.

• The refrigeration system posioned behind and inside the Wine Coolers contains refrigerant. Therefore, avoid damaging the tubes.
• Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• Do not use mechanical devices or other means to accelerate the defrosng process, other than those recommended by the manufacturer.
• Do not use electrical appliances inside the food storage compartments, unless they are of the type

recommended by the manufacturer.

- Do not touch internal cooling elements, especially with wet hands, to avoid cracks or injuries.

- Maintain the venlaon openings in the appliance enclosure or in the built-in structure, free of obstrucon.

- Do not use pointed or sharp-edged objects such as knives or forks to remove the frost.

- Never use hairdryers, electrical heaters or other such electrical appliances for defrosng.

- Do not scrape with a knife or sharp object to remove frost or ice that occurs. With these, the refrigerant circuit can be damaged, the spill from which can cause a re or damage your eyes.

- Do not use mechanical devices or other equipment to hasten the defrosng process.

- Absolutely avoid the use of open ame or electrical equipment, such as heaters, steam cleaners, candles, oil lamps and the like in order to speed up the defrosng phase.

- Never use water wash the compressor posion, wipe it with a dry cloth thoroughly aer cleaning to prevent rust.

- It is recommended to keep the plug clean, any excessive dust residues on the plug can be the cause re.

- The product is designed and built for domesc household use only.

- The guarantee will be void if the product is installed or used in commercial or non-residential domesc household premises.

- The product must be correctly installed, located and operated in accordance with the instrucons contained in

the User Instrucons Booklet provided.

- The guarantee is applicable only to new products and is not transferable if the product is resold.

- Our company disclaims any liability for incidental or consequential damages.

- The guarantee does not in any way diminish your statutory or legal rights.

- Do not perform repairs on this Wine Coolers. All intervenons must be performed solely by qualified personnel.

- If you are discarding an old product with a lock or latch ed to the door, ensure that it is le in a safe condion to prevent the entrapment of children.

- This appliance can be used by children aged from 8 years and above and by persons with reduced physical, sensory or mental capabilities or with a lack

of experience and knowledge; provided that they have been given adequate supervision or instrucon concerning how to use the appliance in a safe way and understand the hazards involved.

- Children should not play with the appliance. Cleaning and user maintenance should not be made by children without supervision.

- Locks: If your Fridge/Freezer is ed with a lock, to prevent children being entrapped keep the key out of reach and not in the vicinity of the appliance. If disposing of an old Fridge/Freezer break o any old locks or latches as a safeguard.

DOUBLE DOOR

Climate Class

The appliance is designed to operate at the limited range of ambient temperature, depending on climate zones. Do not use the appliance at the temperature out of the limit. Climate class of your appliance is indicated on the label with technical descripon inside the fridge compartment.

Climate Class	Amb. T. (°C)	Amb. T. (°F)
SN	From 10 to 32	From 50 to 90
N	From 16 to 32	From 61 to 90
ST	From 16 to 38	From 61 to 100
T	From 16 to 43	From 61 to 110

TRANSPORTATION INSTRUCTIONS

The appliance should be transported only in a vercal upright posion. The packing as supplied must be intact during transportaon. If during the course of transport the product has been transported horizontally, it must only be laid on its le hand side (when facing the door front) and it must not be operated for at least 4 hours to allow the system to sele aer the appliance is brought back to upright posion.

1. Failure to comply with the above instrucons could result in damage occurring to the appliance. The manufacturer will not be held responsible if these instrucons are disregarded.

2. The appliance must be protected against rain, moisture and other atmospheric inuences.

INSTALLATION INSTRUCTIONS

1. If possible avoid placing the appliance near cookers, radiators or in direct sunlight as this will cause the compressor to run for long periods. If installed next to a source of heat or refrigerator, maintain the following minimum side clearances:

From Cookers 4" (100 mm)

From Radiators 12" (300 mm)

From Fridges 4" (100 mm)

1. Make sure that sucient room, with an average temperature of between 16^ C and 32^ C, is provided around the appliance to ensure free air circulaon. Ideally, a space of no less than 9cm on the back and 2cm on the sides.

2. The appliance should be located on a smooth surface.

3. It is forbidden to use the refrigerator outdoors.

4. Protecon from moisture. Do not locate the freezer in moist space to avoid the metal parts rusty. And do not spray water to the freezer, otherwise it will weaken the insulaon and causes current leakage.

5. Refer to "Cleaning and Care" secon to prepare your appliance for use.

6. If the freezer is installed in unheated areas, garages etc., in cold weather condensaon may form on the outer surfaces. This is quite

normal and is not a fault. Remove the condensaon by wiping with a dry cloth.

1. Never place Refrigerator in a wall recessed or into ed cabinets or furniture when it is working, the grille at the back may become hot and the sides warm. Do not drape the Refrigerator with any covering.

STARTING TO USE

Before you starng to use the freezer, please check that:

1. The interior is dry and air can circulate freely at the rear.
2. Clean the interior as recommended under "TAKE CARE" secon (electric parts of the refrigerator can only be wiped by dry cloth).
3. Do not switch on unl 4 hours aer moving the fridge/freezer. The coolant uid needs me to sele. If the appliance is switched o at any me, wait 30 minutes before switching back on to allow the coolant uid to sele.
4. Before connecng the Refrigerator to the mains supply posion. The thermostat control dias is located inside the Fridge compartment.
5. Turn the thermostat knob to the "3" posion and turn on the electricity. The compressor and the light inside the refrigerator will begin to work.
6. Before storing foods in your refrigerator, turn the refrigerator on and wait for 24 hours, to make sure it is working properly and to allow the Fridge/Freezer to fail to the correct temperature.
7. Open the door 30 minutes later, if the temperature in the refrigerator decreased obviously, it shows that the refrigerator system works well. When the refrigerator operates for a period of me, the temperature controller will automatically set the temperature within limits it opens.

Switching on your unit

The temperature selector Knob is located on the right hand side wall of the refrigerator interior.

Seng "O": unit is o.

MAX MED

Seng "MIN": less cool temperature.

Seng "MED": normal operaon (adequate for most situaons)

Seng "MAX": coolest Temperature

During high ambient temperature: it may be necessary to set the thermostat to the coolest seng (posion "MAX"). This may cause the compressor running connuously in order to maintain a low temperature in the cabinet.

For the rst me you install your refrigerator, set the thermostat knob at "MED". Give your refrigerator me to cool down completely before adding food. It is the best to wait 24 hours before adding food. The thermostat knob controls the temperature. When the thermostat control knob is set to "OFF", the refrigerator will not be running.

IN USE

1. The appliance might not operate consistently (possibility of defrosng of contents or temperature becoming too warm in the frozen food compartment) when sited for an extended period of me below the cold end of the range of temperatures for which the refrigerang appliance is designed
2. The informaon about the climate range of the appliance is provided on the rated plate.
3. The fact that the internal temperatures could be aected by such factors as the locaon of the refrigerang appliance, ambient temperature and the frequency of door opening, and, if appropriate, a warning that the seng of any temperature control device might have to be varied to allow for these factors
4. The fact that eervescent drinks should not be stored in food freezer compartments or cabinets or in low-temperature compartments or cabinets, and that some products such as water ices should not be consumed too cold
5. The need to not exceed the storage me(s) recommended by the food manufacturers for any kind of food

Tips for keeping food perfect in the Fridge

Take extra care with meat and sh: cooked meats should always be stored on a shelf above raw meats to avoid bacterial transfer. Keep raw meats on a plate which is large enough to collect juices and cover it with cling lm or foil.

Leave space around food: this allows cold air to circulate around the Fridge, ensuring all parts of the Fridge are kept cool.

Wrap up food!: to prevent transfer of avors and drying out, food should be separately packed or covered. Fruit and vegetables need not be wrapped.

Pre-cooked food should be cooled properly: allow pre-cooked food to cool down before placing in the Fridge. This will help to stop the internal temperature of the Fridge from rising.

Shut the door!: to prevent cold air escaping, try to limit the number of mes you open the door. When retuning from shopping, sort foods to be kept in your Fridge before opening the door. Only open the door to put food in or take it out.

If you're not at home for a long time

• Turn o the refrigerator rst and then unplug the unit from the wall outlet.

• Remove all the food.

• Clean the refrigerator.

• Leave the lid open slightly to avoid possible formaon of condensaon, mold, or odors.
• Use extreme cauon in the case of children. The unit should not be accessible to child's play.
• Short vacaons: Leave the refrigerator operang during vacaons of less than three weeks.
• Long vacaons: If the appliance will not be used for several months, remove all food and unplug the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly: blocking it open if necessary or have the door removed.

ENERGY SAVING

For beer energy saving we suggest:

• Installing the appliance away from heat sources and not exposed to direct sunlight and in a well-venlated room.
• Avoid pung hot food into the refrigerator to avoid increasing the internal temperature and therefore causing connuous functionalizing of the compressor.
• Do not excessively stu foods so as to ensure proper air circulaon.
• Defrost the appliance in case there is ice to facilitate the transfer of cold.
• In case of absence of electrical energy, it is advisable to keep the refrigerator door closed.
• Open or keep the doors of the appliance open as lile as possible.
• Avoid adjusting the seng to temperatures too cold.
• Remove dust present on the rear of the appliance.

TAKE CARE

Defrosting

Defrost twice a year or when a frost layer of around 5 mm has formed.

Alternatively you may switch o the freezer at the socket outlet and pull out the mains plug. Extract the water conduit and put in a water container.

As a temporary measure, this frost should be scraped away using a plasc scraper. NEVER use a metal or sharp instrument. This should be carried out if the frost build-up cannot be scraped away, or if it begins to interfere with the food storage. Chose a me when the stock of frozen food is low and proceed as follow:

1. Take out the frozen food, turn the Refrigerator o at the mains supply and leave the doors open. Ideally the frozen food should be put into another Fridge/Freezer or refrigerator. If this is not possible wrap the food, rstly in several sheets of newspaper or large towels and then in a thick rug or blanket and keep it in a cool place.

2. Scrape away as much frost build-up as possible using the plasc scraper. To accelerate the thawing process place bowls of hot water inside the Fridge/Freezer cabinet. As the solid frost loosens, prize it away with the plasc scraper and remove.

3. When defrosng is completed, clean your Fridge/Freezer as described.

Cleaning and Care

Aer defrosng you should clean the Fridge/Freezer internally with a weak soluon of bicarbonate of soda. Then rinse with warm water using a damp sponge or cloth and wipe dry. Wash the baskets in warm soapy water and ensure they are completely dry before replacing in the Fridge/Freezer. Condensaon will form on the back wall of the Fridge; however it will normally run down the back wall and into the drain hole behind the salad bin. The drain hole will have a "cleaning spike" inserted into it. This ensures that small pieces o food can not enter the drain. Aer you have cleaned the inside of your Fridge and removed any food residues from around the whole, use the "cleaning spike" to make sure that there are no blockages. Use standard furniture polish to clean the Fridge/Freezer exterior. Make sure that the doors are closed to prevent polish geng on the magnec door seal or inside. The grille of the condenser at the back of the Fridge/Freezer and the adjacent components can be vacuumed using a so brush eachment. Do not use harsh cleaners, scouring pads or solvents to clean any part of the Fridge/Freezer.

REVERSING THE DOOR SWING

1. Remove the right top hinger cover.
2. Remove the screws xed the top-hinge with cross-slot screwdriver.
3. Replace the top-hinge and the top-door limit block and the door bearing bush to the other side.

A. Remove the nut with sleeve. Take o the washer then remove the axes to the other side and xed.
B. Remove the door limit block.
C. Please taking out another door limit block, with screw mounng to the door.

1. Disassemble the screws xed the boom-hinge with cross-slot screwdriver.

Note: the refrigerator-freezer incline angle less 45^ .

1. Replace the boom door bearing bush and the limit block.
2. Replace the boom hinge to the other side then x it with screws.
3. Replace the mid-hinge.
4. Set the boom door right posion, x the mid-hinge.
5. Replace the top-hinge.

6. Set the top door right posion, x the top-hinge and the cover.

7. Install the four screw caps and two catches to corresponding posion.

8. Ensure the Appliance is unplugged and empty.

9. Adjust the two leveling feet to their highest posion.
   • We recommend you have someone to assist you.

10. replace the leveler to the other side and adjust it to make sure the cabinet level.

TROUBLE SHOOTING

• If the appliance does not operate when switched on, check.
• Power cut: If the internal temperature of the Fridge/Freezer compartment is -18°C or less when the power returns, your food is safe. The food in your Fridge/Freezer will remain frozen for approx 16 hours with the door closed. Do not open the Fridge/Freezer door more than necessary.
• The product is designed and built for domestic household use only.
• The plug is inserted properly in the socket and that the power supply is on. (To check the power supply to the socket, plug in another appliance).
• The fuse has blown/circuit breaker has tripped/main distribuon switch has been turned o.
• The temperature control has been set correctly.
• If the refrigerator is exceptionally cold, you may have accidentally adjusted the thermostat control dial to a higher posion.
• If the refrigerator is exceptionally warm, the compressor may not be working. Turn the thermostat control dial to the maximum seng and wait a few minutes. If there is no humming noise, it is not working. Contact the local store where your purchase was made.
• If condensaon appears outside of the Refrigerator, this may be due to a change in the room temperature. Wipe o any residue of moisture. If the problem connues contact the local store where your purchase was made.
• If the provided plug has been replaced, make sure the new plug is properly connected. If the appliance is sill not operang aer the above checks, please contact Customer Service.

SCRAPPING OLD APPLIANCES

This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE).

WEEE contains both pollung substances (which can cause negative consequences for the environment) and basic components (which can be re-used). It is important to have WEEE subjected to specific treatments, in order to remove and dispose properly all pollutants, and recover and recycle all materials. Individuals can play an important role in ensuring that WEEE does not become an environmental issue; it is essenal to follow some basic rules:

WEEE should not be treated as household waste.

WEEE should be handed over to the relevant collecon points managed by the municipality or by registered companies. In many countries, for large WEEE, home collecon could be present.

In many countries, when you buy a new appliance, the old one may be returned to the retailer who has to collect it free of charge on a one-to-one basis, as long as the equipment is of equivalent type and has the same funcons as the supplied equipment.

Conformity

By placing the mark on this product, we are conming compliance to all relevant European safety, health and environmental requirements which are applicable in legislaon for this product.

TABLE DES MATIÈRES

INFORMATIONS SUR LA SÉCURITÉ

DOUBLE PORTE

Classe climaque

INSTRUCTIONS DE TRANSPORT

INSTRUCTIONS D'INSTALLATION

DÉMARRAGE

FONCTIONNEMENT DE LA DOUBLE PORTE

SKROTNING AV GAMLA APPARATER