Q: Is the protective sheet (foggio polionda) mandatory for the washing machine OZ4 127T 1S?

Yes, it is mandatory. According to the manual for your ZEROWATT OZ4 127T 1S, the foggio polionda (protective sheet) must be placed under the machine as indicated in the installation diagrams. This sheet serves two essential purposes: It protects your floor from moisture and water leaks It isolates the machine from vibrations and noise during operation If you haven't set it up yet, please do so now: it's simple, just slide it under the washing machine according to the configuration illustrated in the manual. Make sure you still have the sheet in your original packaging.

Q: What is the drum of the washing machine OZ4 127T 1S?

Yes, the drum and the basket refer to the same thing : the stainless steel rotating cylinder inside your washing machine OZ4 127T 1S, where you place your clothes for washing. It is the drum that spins during the washing cycles to clean your items. If you hear noise or feel an anomaly during operation, check that nothing is stuck between the drum and the outer tub (metal parts, open zippers, etc.). During maintenance, also remember to regularly clean the filter located at the bottom of the washing machine (access through the lower panel) and the detergent drawer, which must remain clear for your machine to operate correctly.

Q: What are the symptoms of a damaged washing machine?

On the ZEROWATT OZ4 127T 1S , here are the main symptoms indicating a malfunction: Signs of detectable problems: The machine does not fill with water (error E2) - Check that the water tap is open and that the inlet hose is not kinked. The machine does not drain water (error E3) - The filter may be clogged or the drainage system obstructed. The spin cycle does not work - This may indicate an unbalanced load, incomplete drainage, or excess detergent causing foam buildup. Unusual noises or excessive vibrations - Stop the machine and check that the load is well balanced and that the machine is properly installed. Water leaks - Check the hose connections and ensure that the filter is properly closed after cleaning. The cycle interrupts or stops - This may be due to overload or an electrical issue. Maintenance tip: To avoid malfunctions, clean the detergent drawer and the filter once a month. In case of persistent failure, contact an authorized service center using original replacement parts.

Q: Why does my washing machine OZ4 127T 1S move excessively with the transport screws?

This is exactly what was supposed to happen! The excessive movements were due to the transport screws and spacers that had not yet been removed. The manual for the OZ4 127T 1S states that the device is equipped with 2 or 4 screws (A) and 2 or 4 spacers (B) for transport. These elements keep the drum and suspension in place during shipping. If you leave these screws in place, the machine cannot properly absorb the vibrations of the cycle and moves excessively. To finalize the installation: Make sure all screws are unscrewed and spacers removed If any spacers have fallen inside, tilt the machine forward to retrieve them Close the holes with the provided caps (connectors) Check that the protective sheet is properly placed under the device It is now finished - your machine will operate without abnormal movements, as you will notice.

Q: Can I remove the transport screws from the OZ4 127T 1S washing machine without damaging the appliance?

Yes, absolutely! Removing the transport screws will not damage your OZ4 127T 1S washing machine. These screws are specifically designed to be removed before the first use. According to the appliance manual, you need to unscrew the 2 or 4 screws (A) at the back and remove the 2 or 4 spacers (B) . This is a mandatory step for the proper functioning of your machine. After removing the screws: Close the holes with the connectors provided in the manual Check for fallen spacers - if any spacers have slipped inside, gently tilt the machine forward to retrieve them Your appliance is then ready for the first wash These transport screws and spacers exist only to protect the machine during transport and shipping . Removing them will not damage your OZ4 127T 1S in any way.

Question 1

Is the protective sheet (foggio polionda) mandatory for the washing machine OZ4 127T 1S?

Accepted Answer

Yes, it is mandatory. According to the manual for your ZEROWATT OZ4 127T 1S, the foggio polionda (protective sheet) must be placed under the machine as indicated in the installation diagrams.

This sheet serves two essential purposes:

It protects your floor from moisture and water leaks
It isolates the machine from vibrations and noise during operation

If you haven't set it up yet, please do so now: it's simple, just slide it under the washing machine according to the configuration illustrated in the manual. Make sure you still have the sheet in your original packaging.

Question 2

What is the drum of the washing machine OZ4 127T 1S?

Accepted Answer

Yes, the drum and the basket refer to the same thing: the stainless steel rotating cylinder inside your washing machine OZ4 127T 1S, where you place your clothes for washing.

It is the drum that spins during the washing cycles to clean your items. If you hear noise or feel an anomaly during operation, check that nothing is stuck between the drum and the outer tub (metal parts, open zippers, etc.).

During maintenance, also remember to regularly clean the filter located at the bottom of the washing machine (access through the lower panel) and the detergent drawer, which must remain clear for your machine to operate correctly.

Question 3

What are the symptoms of a damaged washing machine?

Accepted Answer

On the ZEROWATT OZ4 127T 1S, here are the main symptoms indicating a malfunction:

Signs of detectable problems:

The machine does not fill with water (error E2) - Check that the water tap is open and that the inlet hose is not kinked.
The machine does not drain water (error E3) - The filter may be clogged or the drainage system obstructed.
The spin cycle does not work - This may indicate an unbalanced load, incomplete drainage, or excess detergent causing foam buildup.
Unusual noises or excessive vibrations - Stop the machine and check that the load is well balanced and that the machine is properly installed.
Water leaks - Check the hose connections and ensure that the filter is properly closed after cleaning.
The cycle interrupts or stops - This may be due to overload or an electrical issue.

Maintenance tip: To avoid malfunctions, clean the detergent drawer and the filter once a month. In case of persistent failure, contact an authorized service center using original replacement parts.

Question 4

Why does my washing machine OZ4 127T 1S move excessively with the transport screws?

Accepted Answer

This is exactly what was supposed to happen! The excessive movements were due to the transport screws and spacers that had not yet been removed.

The manual for the OZ4 127T 1S states that the device is equipped with 2 or 4 screws (A) and 2 or 4 spacers (B) for transport. These elements keep the drum and suspension in place during shipping. If you leave these screws in place, the machine cannot properly absorb the vibrations of the cycle and moves excessively.

To finalize the installation:

Make sure all screws are unscrewed and spacers removed
If any spacers have fallen inside, tilt the machine forward to retrieve them
Close the holes with the provided caps (connectors)
Check that the protective sheet is properly placed under the device

It is now finished - your machine will operate without abnormal movements, as you will notice.

Question 5

How to retrieve the spacers that fell inside my washing machine OZ4 127T 1S?

Accepted Answer

The spacers are transport pieces located at the back of the washing machine. If one of them has come loose and slipped inside, here’s how to retrieve it:

Procedure

Lean the washing machine forward (towards you) gently. The spacer should slide down and come out from the back. Place a blanket or cardboard on the floor to catch it.
If this method does not work, you will need to access the inside: open the lower front panel (usually secured by 2-3 screws) to manually reach the piece.

Important after retrieval

Once the spacer is removed, ensure that all spacers are removed before use. According to the manual, there are usually 2 or 4 spacers to remove from the back by unscrewing the screws (A) and removing the wedges (B). The holes should then be closed with the provided connectors.

The presence of spacers in place will cause excessive movement during spinning, as they keep the drum in place for transport.

Question 6

Can I remove the transport screws from the OZ4 127T 1S washing machine without damaging the appliance?

Accepted Answer

Yes, absolutely! Removing the transport screws will not damage your OZ4 127T 1S washing machine. These screws are specifically designed to be removed before the first use.

According to the appliance manual, you need to unscrew the 2 or 4 screws (A) at the back and remove the 2 or 4 spacers (B). This is a mandatory step for the proper functioning of your machine.

After removing the screws:

Close the holes with the connectors provided in the manual
Check for fallen spacers - if any spacers have slipped inside, gently tilt the machine forward to retrieve them
Your appliance is then ready for the first wash

These transport screws and spacers exist only to protect the machine during transport and shipping. Removing them will not damage your OZ4 127T 1S in any way.

Question 7

Why does my ZEROWATT Z130 S washing machine stop at 50 minutes during the cycle?

Accepted Answer

If your ZEROWATT Z130 S washing machine consistently stops at 50 minutes, it may be due to several common causes:

1. Check the selected program

Some programs have a predefined duration, and 50 minutes may correspond to the normal end of the cycle. Make sure the chosen program meets your needs.

2. Electrical supply issues

Check that the machine is properly plugged in and that the outlet is working.
Ensure that the circuit breaker has not tripped.

3. Door closure

The machine may stop if the door is not properly closed or if the locking mechanism is faulty. Ensure that the door is securely locked during the cycle.

4. Water supply

A lack of water or insufficient pressure can interrupt the cycle. Check that the water tap is open and that the inlet hose is not kinked or blocked.

5. Drainage issues

If the machine cannot drain water, it may stop. Check that the drainage hose is not clogged or kinked.

6. Error codes

Look for any error code displayed on the control panel, as this may indicate the source of the problem.

If the problem persists after these checks, it is advisable to contact a qualified technician for a thorough diagnosis.

Question 8

What is the shortest wash cycle on the ZEROWATT OZ130T-1-S washing machine?

Accepted Answer

The ZEROWATT OZ130T-1-S washing machine offers several wash programs, each with a different duration. The shortest cycle is generally designed for a quick wash, suitable for lightly soiled clothes or a quick refresh.

Shortest cycle on the ZEROWATT OZ130T-1-S:

The quick program lasts about 15 to 30 minutes depending on the load and selected options.
This cycle uses less water and energy while providing effective washing for lightly soiled textiles.

To select this cycle, simply turn the program selector to the position indicating quick or express wash. Be sure not to overload the machine to ensure a good result.

This cycle is ideal for daily use when you want a quick wash without waiting for the full traditional cycle.

User manual ZEROWATT : user manuals and guides in PDF

Models ZEROWATT most viewed

Browse manuals ZEROWATT by appliance type

Recent questions about devices ZEROWATT