ZTLP 126/L-30 - Washing machine ZEROWATT - Free user manual and instructions
Find the device manual for free ZTLP 126/L-30 ZEROWATT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Washing Machine |
| Brand | Zerowatt |
| Model | ZTLP 126/L-30 |
| Capacity (Cotton) | 6 kg |
| Maximum Spin Speed | 1200 rpm |
| Programs | Cotton, Synthetics, Delicates, Wool, Hand Wash, Chef (Mix & Wash), Rapid 30, Rinse, Spin, Drain |
| Options | Easy Iron, Extra Rinse, Delayed Start (3/6/9h) |
| Control Type | Electronic |
| Display | Remaining Time Indicator |
| Door Lock Indicator | Yes |
| Voltage | 230 V / 50 Hz |
| Wash Power | 175 W |
| Spin Power | 400 W |
| Heater Power | 1950 W |
| Pump Power | 30 W |
| Maximum Power | 2150 W |
| Fuse Rating | 10 A |
| Water Pressure | 0.05 - 0.8 MPa |
| Water Consumption (EN 60456) | 58 L |
| Energy Consumption (EN 60456) | 1.02 kWh |
Frequently Asked Questions - ZTLP 126/L-30 ZEROWATT
How do I use the delayed start function?
Select the desired program, then press the B2 delayed start button repeatedly until the desired delay (3, 6, or 9 hours) is illuminated. Press H start/pause to begin the countdown. The machine will start after the selected delay.
How can I pause the washing machine to add clothes?
Press and hold the H start/pause button until the option lights flash. Wait for the door lock indicator to turn off (about 2 minutes), then open the door. Add clothes, close the door, and press H again to resume.
How do I cancel or change a program?
Turn the program selector to OFF to cancel the current program. Then select a new program and press H to start.
What does the Easy Iron option do?
The C1 Easy Iron option reduces creasing by eliminating intermediate spins and using a gentle final spin. For programs like Delicates, it stops before the final spin; press C1 again to drain and spin.
What is the Extra Rinse option?
The C2 Extra Rinse option adds an extra rinse cycle with additional water and drum rotations for better rinsing, available for Cotton, Synthetics, Delicates, and Rinse programs.
How do I select the spin speed?
Press the B1 spin speed selector to choose from available speeds indicated on the panel. To eliminate spin, set it to the 'X' position.
Why won't the door open during a cycle?
The door is locked for safety. The G door lock indicator will be lit. Wait until the program ends and the indicator turns off before opening.
How long does a typical Cotton program take?
The Cotton program at 60°C takes approximately 155 minutes. Actual time may vary based on load, water pressure, and temperature.
Can I use liquid detergent with prewash?
No, do not use liquid detergent in programs with prewash or delayed start. Use powder detergent in those cases.
What should I do if the machine stops and the Stop/Fine light is on?
Turn the program selector to OFF, open the door and drum doors to remove laundry. The cycle is complete.
User questions about ZTLP 126/L-30 ZEROWATT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual ZTLP 126/L-30 - ZEROWATT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZTLP 126/L-30 by ZEROWATT.
USER MANUAL ZTLP 126/L-30 ZEROWATT
A COMANDO SELETTORE PROGRAMMI/TEMPERATURE
Table of contents
Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZEROWATT
Model : ZTLP 126/L-30
Category : Washing machine