Ninebot KickScooter MAX G30 - Scooter SEGWAY - Free user manual and instructions

USER MANUAL Ninebot KickScooter MAX G30 SEGWAY

Original Instructions

Contents Thanks for choosing the Ninebot KickScooter Max!

1 Riding Safety 02
2 Packing List 04
3 Diagram 05
4Assembling Your KickScooter 06
5FirstRide 07
6 Charging 08
7 Learning to Ride 08
8 Warnings 10
9 Folding and Carrying 14
10 Maintenance 15
11 Specifications 16
12 Certifications 17
13 Trademark and Legal Statement 20
14 Contact 21

Thanks for choosing the Ninebot KickScooter Max (hereinafter referred to as KickScooter)!

Your Kick Scooter is a recreational product with mobile app, allowing you to connect with other riders.

Eny your ride and correct with riders world wide

1 Riding Safety

1. The KickSpecter is a recreational product. Before mastering riding skills, you need to practice the Nether Nineteel Inc. (mcans Nincetol (Bolming) Inc Co., Ltd. and its subsidiaries and all mikes) nor Sweden inc is responsible for any injuries or damage caused by an intransiction or failure to follow the inst utions in this document.
2. Please understand that, you can reduce the need by following all the instructions and warnings in this manual, but you cannot eliminate all the risks. Remember that, whichever you take the Kick Spooter your skin injury from loss of control, collisions, and falls. When entering into public spaces always comply with the local laws and regulations. As with other vehicles, faster speeds require longer braking distance. Sudden braking on low traction surfaces could lead to wheel slip, or falls. Be cautious and always keep a safe distance between you and other people or vehicles when riding. Be alert and slow down when entering unfamiliar areas.
3. Always wear a helmet when riding. Use an approved bicycle or skateboard helmet that fits properly with the chin strap in place, and provides protection for the back of your head.
4. Do not attempt your first ride in any area where you might encounter children, pedestrians, pets, vehicles, bicycles, or other obstacles and potential hazards.
5. Respect pedestrians by always yielding the right of way. Pass on the left whenever possible. When approaching a pedestrian from the front, stay to the right and slow down. Avoid starting pedestrians. When approaching from behind, announce yourself and slow down to waking speed when passing. Please obey local traffic laws and regulations in situations is a Hinterl.
6. In places with our laws comply with the safety guide on our net in this manual. Neither Nilesh Inc nor Segway no. is responsible for any property damage, personal injury, or death, accidents, or legal causes caused by violations of the safety instructions.

7. Do not allow anyone to ride your Kick Scooter on his/her own unless they have carefully read this manual and followed the New Rider Manual in the App. The safety of new riders is your responsibility. Assist new riders until they are comfortable with the basic operation of the Kick Scooter. Make sure each new rider wears a helmet and other protective equipment.
   B. Before each ride check for loose fasteners and damaged components. The Kc<Scoutor makes abnormal sounds, or signals an alarm, immediately step riding, Diagnose your Kc<Scoutor via the Segway Nibelot Apo arc seal you doolor /stir bolor for service.

8. Be alert. Sean both far ahead and in front of your KickScorer - your eyes are your best tool for safely avoiding obstacles and low friction surfaces (including, but not limited to, wet grouse, loose sand, loose gravel, and ice).

9. To reduce risk of injury, you must read and follow a "CAUTION" and "WARNING" notices in this document. Do not ride at an unsafe speed. Under no circumstances should you ride on roads with motor vehicles. The manufacturer recommends riders be 14+ years old. Always follow these safety instructions.

A. People who should not ride the KickScooter include

1. Anyone under the influence of alcohol or drugs.

ii Anyone who suffers from disease that puts them at risk if they engage in strenuous physical activity.

In Anyones who has problems with balance or with motor skills that would meet (or with) their ability to maintain balance.

iv. Anyone whose weight is outside the stated limits (see Specifications).

y.

R. Riders under the age of 18 years old should ride under adult supervision.
C. Comply with local laws and regulations when riding this product. Do not ride where prohibited by local laws.
D. To rice safely, you must be able to clearly see what is in front of you and you must be clearly visible to others
Do not ride in the snow, in the rain, or on roads which are wet, muddy, icy, or that are slpplly for any reason. Do not ride over obstacles (sand, loose gravel, or sticks). Doing so could result in a loss of balance or traction and could cause a fall.

1. Do not alter or change your KickSooter in the charges or the power outlet is wet.
2. As with any electronic device, use a surge protector when changing to help protect your 'KickScout' from damage due to power surges and voltage spikes. Only use the Fogway suppled charger. Do not use a charger from any other different product modes
3. Use only Ninetobot or Gateway approved parts and accessories. Do not modify your KioskScoper. Modifications to your KickScoper could interfere with the operation of the KickScoper, could result in serious injury and/or damage, and could void the Limited Warranty.

User MaterialsAssembled KickScooter

Accessories

When unmasking your Kickscooter, please verify that the above items are included in the package. If you are missing any components, please contact your sales/distributor or nearest service center (see Contact in the user manual). After verifying that all components are present and in good condition, you can assemble your new Kickscooter.

Please rean the box and packaging materials in case you need to ship your KickScooler n the future.

Remember to power off your KinkScooter and unplag the power cord before assembling, mounting accessories, or cleaning the mainframe.

0405

3 Diagram2 Packing List

4 Assembling Your KickScooter

1. Unfold the handlebar stem and fasten it. Then unfold the kickstand to support the KickScooter

1. Install six screws (two on each slip). With the included hex wrench.

1. Firmly connect the wires inside the handle and the stem. Slide the handle onto the stem. Be aware of the correct orientation.

1. Vorty that your KiskSootter can be powered on and off!

5 First Ride

There are safety risks when learning to ride the Kick Scooter. You must read the Riding Safety via the App before your first ride.

For your safety, your new KickScooter is not actuated and will beeps occasionally after Power ON.

Url activated, the Kick Scooter maintains very low riding speed, and cannot be ridden with full function. Install the App on your mobile device (with Bluetooth 4.0 or above) connect to the kick Scooter with Bluetooth, and follow the App instructions to activate your Kick Sensor and enjoy the full performance.

Segway-Ninebot App. Scan the QR code to download the Apo

Instal the App and register/login. Power on the KidJoocoter A blinking

Bluetooth icon indicates the KiekeScooter is waiting for a connection.

Click "Vehicle" "Scan for Vehicle" to connect for your Kick Scooter.

The KixScooter will beep when the connection is successful. The Bluetooth icon will stop, binking and remain illuminated.

Follow the App Instructions to active the KickScopter and loam how to roic safely. You can now start to use your KickScopter, check the status with App. and interact with other users. Have fun!

6 Charging

Charging step tips

On the charge port cover,

Insert the charge plug.

Close the charge port cover when finished.

WARNING

Do not charge if the charge port or power cord is wel.
Do not charge or use your battery if it is damaged or see trace of water.
Close the charge port cover when not charging.

7 Learning to Ride

Wear an approved helmet and other protective gear to minimize any possible injury.

1. Power on the KickScissor and checkthe power level indicator. Charge theKickScissor if the battery levels low.

1. Stand on the footrest with one foot and push off with another foot to start gaiting.

1. Put your other foot on the footrest to keep both feet stable. Press the throttle on the right hand to speed up when you are balanced. Note, for your safety, the motor will not engage until the Kick Scooper reaches 3.1 mph.

1. Slow down by releasing the throttle; and brake by squeezing the brakes lever.

1. To turn, shift your body weight and turn the handic slightly.

WARNING

When hard braking, you risk serious injury due to loss of traction and falls. Maintain a moderate speed and look out for potential hazards.

8Warnings

DO NOT ride the KiekScooter in the rain. DO NOT get wet.

WARNING

Failure to follow these instructions could lead to serious injury.

DO NOT ride over speed bumps, thresholds, or other bumps at HIGH SPEED.

Watch your head when passing through doorways.

Do not know your feet on the rear tender

DO NOT press the throttle when walking with the KickScooter.

DO NOT carry heavy objects on the handlebar.

avoid contacting obstacles with their tire/wheel.

DO NOT mle the KickScooter with only one foot.

DO NOT rule on public road motorways or highways.

DO NOT rotate the handle violently while moving at high speed.

DC NOT touch the hub motor after riding bccausit can get hot.

DO NOT take your hands off the handlebar while riding. Do not ride with one hand only.

DO NOT Rite through puddles or other bodies of water.

The KickScooter is for one rider only. Do not carry any passengers. Do not carry a child. Do not ride when pregnant.

DO NOT slide up and down stairs or jump over obstacles.

Do not use mobile phone or wear earphones when operating the AikScooter.

WARNING

Always keep both hands on the handlebar or you risk serious injury due to loss of balance and falls.

9 Folding and Carrying

Turn off your KickStocker, Turn the Align the snap hook and the safety hook counterclockwise and buckc and hook them. open the quick release lever.

Disengage the snap hook from the buckle. Fold the handlebar stem up, close the quick release lever and turn the safely hook clockwise.

When your Kick Scooter is folded up, lift it by the stem to carry.

10 Maintenance

Cleaning and Storage

This soft, wet, cloth to wipe the main line clean. This hard to remove can be scrubbed with a toothbrush and toothpaste, then cleaned with a soft, wet cloth.

NOTE

Do not wash your KukBrocker with alcohol, gas or no. sectors or any corrosive/volatile solvents. House substances may damage the appearance and internal structure of your KukBrocker. Do not wash your KickBrocker with a power washer or hiss.

WARNING

Make sure the diskShooter is powered OFF, the power cord is unplugged, and the rubber cap on the charge port is lightly secured before cleaning; otherwise you may damage into electronic components.

Score your KickScooter in a cool, dry place. Do not store it outdoors for extended periods of time. Exposure to sunlight and temperature extremes (both hot and cold) will accelerate the aging process of the plastic components and may reduce battery life.

The Pressure

Inflatares to 32-87 p5. Inlatae both tines equily

Battery Pack Maintenance

Do not store or charge the battery at temperatures outside the posted limits (see Specifications). Do not puncture the battery. Refer to your local laws and regulations regarding battery recycling and/or disposal.

A well maintained battery can perform well even after many miles of riding. Charge the battery after each ride and avoid draining the battery completely. When used at room temperature (70°F [22°C]), the battery range and performance are all to best; whereas using 14 temperatures below 30°F (0°C) can decrease range and performance. Typically at 4°F (-20°C) range can be half (half of the sample battery a, 70° - 22°C). Battery range will recover when temperature is reached. More details are available in the App.

NOTE

Typically, a fully charged battery should retain power for 120-180 days. A low power battery should retain power for 30-60 days. Remember to charge the battery after each use. Completely draining the battery may cause permanent damage to the battery. Electronics inside the battery record the discharge condition of the battery; damage caused by over-charging or under-charging will not be covered by the limited Warranty.

A

Do not attempt to disassemble the battery. Do not touch battery contacts. Do not dismantle or puncture the casing. Keep the battery contacts away from metal objects to prevent short circuit. Risk of fire and electronic shock. No user serviceable parts. Do not charge or use your battery if it is damaged or see trace of water.

WARNING

To not rime when the ambient temperature is outsoe the machine operation temperature (see Specification) becuse low/high temperature will limit the maximum power/ torque. Doing so could cause personal injury or property damage due to falls or falls.

11 Specifications

		G30Item
Dimensions	Unlid Length x Width x Height	-45.9 x 28.6 x 47.4 m (116.7 x 47.2 x 203 mm)
	Fold Length x Width x Height	-45.9 x 28.6 x 21.0 m (116.7 x 47.2 x 534 mm)
Weight	Net	Approx. 41.2 lbs (16.7 kg)
Rider	Payload	66.1-220.5 lbs (30.0-100.0 kg)
	Recommended Age	14+ years
	Required Height	31.1-5.5" (120-200 cm)
Machine Parameters	Max Speed	Approx. 15.5 mph (25 mph)
	Typic Range	Approx. 40.4 miles (55 km)
	Max Slope	Approx. 15%
	Traversable Tread	asphalt/flat pavement; obstacles < 0.4 in (1 cm); gaps < 1.2 in (3 cm)
	Operating Temperature	14-104°F (-0-40°C)
	Storage Temperature	-4-72°F (-20-50°C)
	IP Rating	IPX5
	Duration of Charging	~5 h
Battery	Nominal Volts	36 VDC
	Max Charging Volts	/2 VDC
	Charging Temporature	32-104°C (0-40°C)
	Nominal Capacity	55 Wh
	Battery Management System	Over-heating, short circuit, over-current and over-charge protection
	Number of Balancers	1
Motor	Nominal Power	350 W
Charger	Output Power	121 W
	Input Voltage	100-270V ~ 50/60Hz
	Output Voltage	42 VDC
	Output Current	2.9 A
Features	Wire Light	1.0"earlight
	Riding Modes Energy Saving mode	Standard mode and Sport mode

[1]Typical Rang. tested white ringding under full power, 165.3 bs (75.0 kg) load, 72^ F (25°C), 9.3 mph (15 km/h) or average on average.

12 Certifications

Federal Communications Commission (FCC) Compliance Statement for USA

This device complies with part 15 of the FDC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE

This equipment has been used to launch to comply with the limits for a Class B digital device, pursuant to part 15b of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy anc, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation site. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The use is encouraged by being sure that the interference by one or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver

Connect the equipment into an cable on a circuit different from the one which the receiver is connected.

Consul the dealer or am experienced radio/TV technieman for help.

This eucipant coa ples wth FCC racciation expresl limits satt forth for an uncontrolled environment.

Industry Canada (IC) Compliance Statement for Canada

This device complies with Industry Canada license exempt R&S standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

CANICES-3(B)/NMB-3(B)

Neither Sagway, no, nor N nebot is responsible for any changes or modifier one not expressly approved by Sagway Inc. or Ninepoint. Such modifications could void the user's authority to operate the equipment.

FCID:2AL58-N99676

C:22636-NB9676

Important WEEE information

WELLE D'ABOU and Recycling information Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle is responsible to promote this sustainable reuse of materials resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safety recycling.

Battery recycling Information for the European Union

Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/FC and amendment 2013/66/EU concerning batteries and accumulators and waste batteries and accumulator. The Directive determines the framework for 'short return and recycling' of used batteries and accumulator as applicable throughout the European Union. This label is applied to various batteries to indicate that the battery is not to be thrown away, but rather reclaimed upon end of life per the Directive.

In accordance with the European Directive 2008/66/CC and amendment 2013/56/CLI, batteries and accumulators are labeled to indicate that they are to be collected separately and recycled at end of life. The label on the battery may also include a chemical symbol for this metal consumed in the battery (lb for lead, Hg for mercury, and Cd for cadmium). Use of batteries and accumulators must not dispose of batteries and accumulators as unreported municipal waste, but use the collect on framework available to customers for the return, recycling and treatment of batteries and accumulators. Customer participation is important to minimize any potential effects of batteries and accumulators on the environment and human health due to the potential presence of hazardous substances.

Before placing a electronic equipment (FFP) in the waste collection stream or in waste collection facility as the end user of equipment containing batteries and/or accumulators m.a., remove those barriers and accumulate for separate collection.

Restriction of Hazardous Substances (RoHS) Directive

This Niborob (Changzhiou) Tech Co., Ltd. product, with included parts (cabsos, cords, and so on) meets the requirements of Directive 2017/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment; "RoHS RoSS" or "RoHS 2".

Radio Equipment Directive

Segway Europe BV, Hogehilweg 8, 1101 CC Amsterdam, The Netherlands.

Hercoby, Nizhou (Changzhuo) Tech Co., Ltd. declares that the wireless equipment listed in this section are in compliance with the essential requirements and other relevant provisions of Directive 20.4/53/CU

Bluetooth	Frequency Band(s)	2.400G 2.4935GHz
	Max. RF Power	100mW

13 Trademark and Legal Statement

Nanibol is the registered Trademark of Nerebu, (Hamam) Ltd. Co., Ltd; Stegway and the Rder Design are the registered Trademarks of Stegway Inc. Android, Google Play are Trademarks of Google Inc. App Store is a service mark of 'Apple Inc., The respective owners reserve the rights of their trademarks refer to in this manual.

The KickScooter is covered by relevant patents. For patent information go to http://www.segway.com.

We have a completed lelncude descriptions and instructions for all the functions of the KickScoper at the time of printing. However, due to constant mormeverment of product features and charges of freight, your KickScoper may differ slightly from the one shown in this document. Visit the Apple App Store (IOS) or the Google Play Store (Android) to download and install the App.

Please note that there are no maps, diagrams and colour codes with illustrations, menus, notes, or company names. The functions mentioned here may not be applicable to your unit. The manufacturer reserves the right to change this design and functionality of the XieXsodier product, and documentation without prior notice.

2019 Ninebot (Beijing) Tech Co. Ltd. All rights reserved.

14 Contact

Contact us if you experience issues relating to riding, maintenance and safety, or errors/faults with your Kick Scooter.

Americas:

Segway Inc.

17 Technogby Drive, Bedford, NH 03110, USA

T-508-22-6230

fao-508-222-633

001-866-473-4929

E-mail Sales customer [e-mail]

E-mail Service [e-mail]

Website: www.segway.com

Europe, Middle East and Africa:

Segway Europe B.V.

Hogehilweg 8, 110100 Amsterdam, The Netherlands

Website: www.segway.com

Have your KickScooter serial number on hand when contacting Segway.

You can find your serial number on the underside of your KickScooter or in the App under More Settings > Basic Information:

Manuel utiliseur

The manufacturer reserves the right to make changes to the product, release firmware updates, and update this manual at any time. V Sit www.segway.com or check the App to download the latest user

materials. You must install the App. activate your KickScnote, and obtain the latest updates and safety

instructions.

www.segway.com

ninebot KickScooter MAX

Credio 12016/56/UL relative to the limitation of publication of cora the subsubster dangerousnes carry the equipments

Email Service: [e-mail]

Site: Web: www.sgccy.com

[1] Garrester, J., and Delabrière, P. L., "A new method for determining power curves of 155.3 lines (75.0 kg), 25^ (77°C), volatilities of 3.3 wt.% (15 kgs/m) supercapacitor p.p.a.

12 Certificazioni

2019 Ninebot (Beijing) Tech Co. Ltd, Tutti diritti reservab

14 Contatto

Slo nortel:www.sorway.com

L-mail data service. technical [e-mail]

Fingma web,wwW.Soyway.com

Europa, Orlente Medioy Africa

Seegway Europe B.V.

Hooghikg & 115100 Armstender (Palses Bajcs)

Pigra web: www.igway.com