the Citrus Press SCP600 - Juicer SAGE - Free user manual and instructions

Technical Features	Pressure juice extractor, 160 W power, compact design, compatible with all citrus fruits.
Usage	Easy to use with a simple on/off button, ideal for preparing fresh juices at home.
Maintenance and Repair	Removable and dishwasher-safe parts, easy cleaning, 2-year warranty.
Safety	Overheat protection system, non-slip feet for stable use.
General Information	Compact dimensions, lightweight, ideal for daily use, modern design.

Frequently Asked Questions - the Citrus Press SCP600 SAGE

How do I clean the SAGE the Citrus Press SCP600 juice extractor?

To clean the juice extractor, disassemble the removable parts and wash them with warm soapy water. You can also place them in the dishwasher. Wipe the body of the device with a damp cloth.

The SAGE juice extractor won't start, what should I do?

Check that the device is properly assembled and that the lid is securely in place. Also ensure it is plugged into a working outlet.

Can I use citrus fruits of different sizes with this extractor?

Yes, the SAGE the Citrus Press SCP600 juice extractor is designed to accommodate citrus fruits of different sizes thanks to its adjustable cone.

What type of fruits can I use with the SAGE the Citrus Press SCP600?

This extractor is mainly designed for citrus fruits such as oranges, lemons, limes, and grapefruits.

Is there a warranty on the SAGE the Citrus Press SCP600?

Yes, the product generally comes with a 2-year warranty, but it is recommended to check the specific conditions on the manufacturer's website.

How do I get the maximum juice from my citrus fruits?

Cut the citrus fruits in half before pressing, and press slowly and firmly to extract the maximum juice.

The juice extractor makes a lot of noise, is that normal?

A certain level of noise is normal during the operation of the extractor. If the noise is excessive or unusual, check if the parts are properly secured.

Where can I buy spare parts for the SAGE the Citrus Press SCP600?

Spare parts can be purchased directly from the manufacturer's website or from authorized dealers.

Can I use this extractor for other fruits besides citrus?

It is recommended to use this extractor mainly for citrus fruits. For other fruits, a different juice extractor might be more appropriate.

What is the power of the SAGE the Citrus Press SCP600 juice extractor?

The extractor has a power of 160 watts, which is sufficient to efficiently press citrus fruits.

USER MANUAL the Citrus Press SCP600 SAGE

• Remove and safely discard any packaging materials before rst use.

• To eliminate a choking hazard for young children, safely discard the protective cover tted to the power plug.

• This appliance is for household use only. Do not use the appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors. Misuse may cause injury.

• Fully unwind the power cord before operating.

• Position the appliance on a stable, heat resistant, level, dry surface away from the edge and do not operate on or near a heat source such as a hot plate, oven or gas hob.

• Vibration during operation may cause the appliance to move.

• Do not let the power cord hang over the edge of a bench or table, touch hot surfaces or become knotted.

• Always ensure the appliance is turned OFF, unplugged at the power outlet and has been allowed to cool before cleaning, attempting to move or storing.

• Always turn the appliance to the OFF position, switch o at the power outlet and unplug at the power outlet when the appliance is not in use. 2 Sage Recommends Safety First 5 Components6 Assembly6 Functions7 Care & Cleaning7 Troubleshooting SAGE

we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions. IMPORTANT SAFEGUARDS

• A downloadable version of this document is also available at sageappliances.com

• Before using the rst time ensure your electricity supply is the same as shown on the label on the underside of the appliance.3

• Do not use the appliance if the power cord, plug, or appliance becomes damaged in any way. If damaged or maintenance other than cleaning is required, please contact Sage Customer Service or go to sageappliances.com

• Any maintenance other than cleaning should be performed by an authorised Sage

• Children should not play with the appliance.

• Cleaning of the appliance should not be carried out by children unless they are 8 years or older and supervised.

• The appliance and its cord should be kept out of reach of children aged 8 years and younger.

• The installation of a residual current safety switch is recommended to provide additional safety when using all electrical appliances. Safety switches with a rated operating current not more than 30mA are recommended. Consult an electrician for professional advice.

• Always ensure the appliance is properly assembled before use. The appliance will not operate unless properly assembled.

• Do not use the appliance on a sink drain board.

• Keep hands, ngers, hair, clothing as well as spatulas and other utensils away from moving or rotating parts during operation.

• Do not use the appliance for anything other than food and/or beverage preparation.

• In order to avoid the possible hazard of the appliance starting by itself due to inadvertent resetting of the overload protection, do not attach an external switching device (such as a timer) or connect the appliance to a circuit that can regularly switch the appliance on and o.

• Carefully read all instructions before operation and save for future reference.

• The appliance can be used by persons with reduced physical or mental capabilities or a lack of experience and knowledge, only if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

• This appliance shall not be used by children.

• Allow the motor to rest for 1 minute between each use.

• Avoid placing hands or ngers near the hinge of the juice press arm when operating or moving the unit.4 The symbol shown indicates that this appliance should not be disposed of in normal household waste. It should be taken to a local authority waste collection centre designated for this purpose or to a dealer providing this service. For more information, please contact your local council oce. To protect against electric shock, do not immerse the power plug, cord or appliance in water or any liquid.

I. Safety locking system (not shown)

1. Pull the juice press arm up, away from the

motor base, until fully extended.

2. Place the juice collector onto the drive shaft on

top of the motor base, ensuring the juice spout ts into the semi-circular groove at the front of the motor base.

3. Insert the lter into the juice collector, aligning

the indent with arrow in the bottom of the lter over the corresponding tab with arrow in the juice collector.

4. Place the juicing cone onto the drive shaft and

press down lightly to lock the cone into position.

5. To insert the fruit dome, place it into the hole on

the underside of the juice press arm. The fruit dome is magnetic and will stick into place.

6. Ensure the anti-drip juice spout is pushed

down into the pouring position.

DISASSEMBLING THE JUICER

1. Turn the juicer OFF at the ON/OFF button,

then unplug from the power outlet.

2. Pull the juice press arm up, away from

the motor base, until fully extended. Close the anti drip spout by flipping it up.

3. Remove the fruit dome by pulling on it gently

to release the magnet

4. Lift the juice collector from the base with the

lter, juicing cone and fruit dome still in place. Remove the cone and lter from the juice collector over a sink for easier cleaning. Follow recommended care and cleaning guidelines. Functions

1. Ensure the juicer is correctly assembled and

a glass or jug is placed under the juice spout before juicing.

2. Cut the citrus fruit in half by cutting across the

fruit segments, rather than across the tip ends, to ensure more ecient juicing.

3. Plug the power cord into a 220–240V power

outlet, then press ON/OFF switch to ON.

4. Place a citrus fruit half, cut side down,

onto the juice cone and push down lightly onto the spikes.

5. Grasp the handle and slowly lower the juice

press arm. Press down (in a gentle but rm action) until the fruit dome is in contact with the fruit skin. The motor will automatically start and the juicing cone will begin to rotate. The juice will be extracted from the fruit and ow through the juice spout into the glass. The pulp and seeds will collect in the lter.

6. The juicer juices very quickly so each

fruit half will be juiced in a few seconds. To automatically stop the motor, lift the juice press arm up to its extended position.

7. Remove the used fruit from the

juicing cone. Empty excess pulp and seeds from the lter as required. Repeat Steps 3–7 to continue juicing. NOTE The lter should be emptied when full with pulp and seeds. The lter can be emptied during juicing by turning the juicer OFF at the ON/OFF switch and carefully removing the juicing cone and lter. Clean and replace lter and juicing cone before continuing to juice. Do not allow the lter to overll as this may prevent correct operation or damage the unit.7

• Always ensure that the juicer is turned OFF at the ON/OFF switch and the plug is removed from the power outlet before cleaning, disassembling, assembling and storing the appliance.

• Follow these instructions to clean all surfaces or parts that come into contact with food during juicing.

• For easy cleaning immediately after each use rinse removable parts under warm water to remove wet pulp. Allow parts to air dry before reassembling.

• For thorough cleaning after disassembling the appliance, all removable parts should be washed in warm soapy water or on the top shelf of the dishwasher. The base and juice press arm should be wiped with a soft, damp cloth. All parts should be dried thoroughly before reassembling.

• Store the cleaned and reassembled juicer in an upright position in a cool, dry place. Do not place any items on top of the juicer while stored. NOTE

• Never immerse the motor base in water or any other liquid. Do not use harsh abrasives. Troubleshooting POSSIBLE PROBLEM EASY SOLUTION Will not work

• Switch not in the ON position

• Juice press arm not lowered

• Juicing cone or fruit dome not assembled properly

• Filter not assembled properly

• Motor overload protection may have operated (see below) Motor Overload Protection

• The juicer is tted with an overload protector to prevent damage to the Motor. If the Motor suddenly stops working after heavy or long periods of use, turn OFF at the ON/OFF button, unplug from the wall and allow the unit to cool for 15 minutes. Once the unit is cooled you will be able to use the juicer again as normal. NOTE: The unit MUST be unplugged from the supply to allow the protector to reset.

• Despite this overload protector we suggest juicing in smaller batches in order to protect the Motor.8

2 YEAR LIMITED GUARANTEE

Sage Appliances guarantees this product for domestic use in specied territories for 2 years from the date of purchase against defects caused by faulty workmanship and materials. During this guarantee period Sage Appliances will repair, replace, or refund any defective product (at the sole discretion of Sage Appliances). All legal warranty rights under applicable national legislation will be respected and will not be impaired by our guarantee. For full terms and conditions on the guarantee, as well as instructions on how to make a claim, please visit www.sageappliances.com. Guaranteethe Citrus Press