One+ R18PD3 - Drill RYOBI - Free user manual and instructions

Technical Specifications	RYOBI One+ R18PD3 hammer drill, brushless motor, 18V
Rotation Speed	0-450 / 0-1,800 rpm
Maximum Torque	60 Nm
Drilling Capacity in Wood	40 mm
Drilling Capacity in Metal	13 mm
Drilling Capacity in Concrete	13 mm
Weight	1.5 kg
Usage	Ideal for drilling and screwing in various materials
Maintenance	Clean regularly, check the condition of accessories
Safety	Wear safety glasses, do not overload the tool
General Information	Compatible with the RYOBI One+ range, battery not included

Frequently Asked Questions - One+ R18PD3 RYOBI

How do I change the bit on my RYOBI One+ R18PD3 drill?

To change the bit, make sure the drill is turned off. Tighten or loosen the chuck by turning it clockwise to tighten and counterclockwise to loosen. Insert the new bit and tighten the chuck again.

What types of materials can I drill with the RYOBI One+ R18PD3?

The RYOBI One+ R18PD3 can drill into materials such as wood, plastic, light metal, and construction materials like concrete. Make sure to use the appropriate drill bits for each material.

Why is my RYOBI One+ R18PD3 drill not working?

First, check if the battery is sufficiently charged. If the battery is charged, ensure the safety switch is not activated and the chuck is not jammed. If the problem persists, consult the user manual for additional solutions.

How do I adjust the torque on my RYOBI One+ R18PD3 drill?

To adjust the torque, use the torque selector located on top of the drill. Turn it to choose the appropriate torque level based on the material you are drilling.

My RYOBI One+ R18PD3 drill gets hot during use, what should I do?

If the drill gets hot, stop using it and let it cool down. Avoid forcing the drill on hard materials and make sure to use the correct type of drill bit. If overheating continues, contact customer service.

What is the maximum drilling capacity of the RYOBI One+ R18PD3?

The maximum drilling capacity depends on the material. Generally, it can drill up to 13 mm in metal, 30 mm in wood, and 16 mm in concrete.

How do I clean my RYOBI One+ R18PD3 drill?

To clean your drill, use a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals. Use a brush to remove residue from the chuck and bits.

Can I use batteries from other RYOBI products with the RYOBI One+ R18PD3?

Yes, the RYOBI One+ R18PD3 is compatible with all batteries in the RYOBI One+ range, allowing you to use batteries from other RYOBI tools.

Where can I find spare parts for my RYOBI One+ R18PD3 drill?

Spare parts can be purchased from authorized RYOBI dealers, on the official RYOBI website, or at hardware stores that sell RYOBI tools.

USER MANUAL One+ R18PD3 RYOBI

Important! It is essential that you read the instructions in this manual before assembling, maintaining and operating the product.

Safety, performance, and dependability have been given top priority in the design of your percussion drill.

INTENDED USE

The percussion drill is intended to be used only by adults who have read and understood the instructions and warnings in this manual and can be considered responsible for their actions.

The percussion drill can be used for drilling into various material including wood, metal and plastics using a drill bit which has a shank diameter of less than 13mm . It can also be used in hammer mode for drilling masonry and similar materials.

Do not use the percussion drill for any other purpose not described above.

WARNING

Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

PERCUSSION DRILL SAFETY WARNINGS

SAFETY INSTRUCTIONS FOR ALL OPERATIONS

Hold the power tool by insulated gripping surfaces, when performing an operation where the cutting accessory or fasteners may contact hidden wiring. Cutting accessory or fasteners contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.

SAFETY INSTRUCTIONS WHEN USING LONG DRILL BITS

• Never operate at higher speed than the maximum speed rating of the drill bit. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury.
  Always start drilling at low speed and with the bit tip in contact with the workpiece. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury.
  Apply pressure only in direct line with the bit and do not apply excessive pressure. Bits can bend causing breakage or loss of control, resulting in personal injury.
• Ambient temperature range for tool during operation is between 0^ and 40^ .
• Ambient temperature range for tool storage is between 0^ and 40^ .

The recommended ambient temperature range for the charging system during charging is between 10^ and 38^ .

ADDITIONAL BATTERY SAFETY WARNINGS

WARNING

To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive flux as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit.

• Ambient temperature range for battery during use is between 0^ and 40^ .
• Ambient temperature range for battery storage is between 0^ and 20^ .

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national provisions and regulations.

Follow all special requirements on packaging and labelling when transporting batteries by a third party. Ensure that no batteries can come in contact with other batteries or conductive materials while in transport by protecting exposed connectors with insulating, non-conductive caps or tape. Do not transport batteries that are cracked or leaking. Check with the forwarding company for further advice.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still impossible to completely eliminate certain residual risk factors. The following hazards may arise and the operator should pay special attention to avoid the following:

Damage to hearing caused by noise

Wear suitable hearing protection and limit exposure.

Injury to the eyes
Wear protective eye shields or goggles when using the product.
Injury caused by vibration
-Limit exposure. Follow the instructions in Risk Reduction.

Electric shock caused by contact with hidden wires
-Hold the product only by insulated surfaces.
Injury caused by dust
-Dust created by operating the product can cause respiratory injury. Wear appropriate dust

control

mask with filters suitable for protecting against particles from the material being worked on.

RISK REDUCTION

It has been reported that vibrations from handheld tools may contribute to a condition called Raynaud's Syndrome in certain individuals. Symptoms may include tingling, numbness and blanching of the fingers, usually apparent upon exposure to cold. Hereditary factors, exposure to cold and dampness, diet, smoking and work practices are all thought to contribute to the development of these symptoms. There are measures that can be taken by the operator to possibly reduce the effects of vibration:

• Keep your body warm in cold weather. When operating the unit wear gloves to keep the hands and wrists warm. It is reported that cold weather is a major factor contributing to Raynaud's Syndrome.
  After each period of operation, exercise to increase blood circulation.
  Take frequent work breaks. Limit the amount of exposure per day.

If you experience any of the symptoms of this condition, immediately discontinue use and see your doctor about these symptoms.

WARNING

Injuries may be caused, or aggravated, by use of a tool. When using any tool for prolonged periods, ensure you take regular breaks.

• When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.
• Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt and carbon dust.
• Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. They contain chemicals that can damage, weaken or destroy plastic.
  Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear a dust mask.
  For greater safety and reliability, all repairs should be performed by an authorised service centre.

LUBRICATION

All of the bearings in the product are lubricated with a sufficient amount of high grade lubricant for the life span of the product under normal operating conditions. Therefore, no further lubrication is required.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing of as waste. The machine, accessories and packaging should be sorted for environmental-friendly recycling.

KNOW YOUR PRODUCT

See page 81.

1. Gear selector
2. Quick mode selector
3. Torque adjustment ring
4. Keyless chuck
5. Direction of rotation selector
6. Variable speed switch trigger
7. LED light
8. Bit storage
9. Screw driver bit
10. Battery port
11. Handle, insulated gripping surface

MAINTENANCE

WARNING

The product should never be connected to a power supply when you are assembling parts, making adjustments, cleaning, performing maintenance, or when the product is not in use. Disconnecting the product will prevent accidental starting that could cause serious injury.

SYMBOLS

Safety alert

CE conformity

V Volts

Direct current

min

Revolutions or reciprocations per minute

Chuck capacity

No-load speed

EurAsian Conformity Mark

2 | English

Please read the instructions carefully before starting the machine.

CAUTION

Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.

Ukrainian mark of conformity

CAUTION

(Without Safety Alert Symbol) Indicates a situation that may result in property damage.

Drilling without impact

Screwdriving

Percussion drill

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.

SYMBOLS IN THIS MANUAL

Note

Warning

Parts or accessories sold separately

Torque, maximum

Torque, minimum

Speed, minimum

Speed, maximum

The following signal words and meanings are intended to explain the levels of risk associated with this product:

DANGER

Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury.

WARNING

Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.

REDUCTION DES RISQUES

APPRENEZ A CONNAITRE VOTRE PRODUIT

Voir la page 81.

MACHEN SIE SICH MIT IHREM PRODUKT VERTRAUT

SieheSeite81.

VEILIGHEIDSWAARSCHUWINGEN KLOPBOORMACHINE

ALGEMENE VEILIGHEIDSVOORSCHRIFTEN

BUCNE COPNKOCHOHNA C 06pa6aTb1BaEMOn DeTaIbIO. Ha 6oJee BbICOKNX CKOPoCTx PnC CB6OBDHom BpauSeHN CCBepNa 6e3 COPNKOCHOHNA C 06pa6aTb1BaEMOn DeTaIbIO NOBbIaEaTcR BEPOrTHOCTb NCKPnVBHeHNA CBepNa I NOyUeHNA TpaBMbl.

Hakim DoJxeh OcyuectBjAytbc8 Ctporo nepneHkyIpyHO ocN cbepna n6e3 n3nIhero ycnn.Bo3MOXHO NCKPNBHeHne cbepna, KOtOpoe MOKeT npNBecTN Kero nONOMKe NnI NOtepe KOHTpOJI HAd INHCTpyMeHTOM N, KAK CNeIDCTBVE, TpaBME.
TeMnepaTpyoOkpykaUoei CpeblI JIJI 3KcNpyatauHn By, HCTpyMeHTa DoJXHa 6bITb B Dnana3OHe ot 0^ do 40^
TemnepaTypa OkpykaUoSe CpeBdI Dnla XpaHEnn HnCTpyMeHTa DonxHa 6bItb B Dnana3OHe ot 0^ do 40^
PekomeHnyemay TemnepaTypa OkpykaUoce CpeblI dIy 3apAHorO yCTpOJCTBa B npouecce 3apAKn DOJXHa 6bITb B Dnana3OHe MExdy 10^ n 38^

CTOPOXHO

Ipoptyte BCE yka3aHnna, HNCTpyKcHn, INNHOCTpaCnN n CneuΦnKaaCnN, NOCTaBnEMeB C 3TNM 3NeKTPOUNHCTpyMeHTOM. HecobJIOHeHn BCex IHCTpyKcHn, Yka3aHHbIX HnKe, MOKET pINBeCTn K IopaxeHnO 3JIeKTPnueCKmTOKOM, NOKApy n cepbe3HbIM TpaBMam.

CoxpaHnte Bce npdeynpeXdEHHCTpyKcNn daIbHeIeero nCNoIb3OBAHn.

TPEBOAHNA B3OJACHOCTN INCIOJIb3OBAHNYDAPHON DPEJIN

YKA3AHNIO B3ONACHOCTN JIABCEX ONEPAU

TPE6OBAHNA BE30NACHOCTN IPI NCMONb3OBAHNOIONHITENBHOAKYMAYTOPHOH BATAPEI

TOPOXHO

IpynpoTbpaueHnOnaCHOINnoXaparBpe3yblTaTe /KpIKORO 3AmbKaHnur, TpaBM n NOBpeXeHnN3deHnne He ONyckaTe HnCTpyMeHT, CmEHhN aKKymyJrTO pIN3 3apAnHOe yctpoCTBO B KNDKcOTn Hn DeONyCKaTe InonaHaHn JxNkOCTe BHyTpB yCTPOYCTB INn KymyJrTOpOB. Koppo3NoHHbE n npobOraJnne XNkOCTn, TaKne KaK coJeHbI pactBOp, ONpeDeJeHHbIe XMMKATbI, Ot6eJIbAIOUne CpeDCTBa NnI codepKaUne INx PNOyKTbI, MOrTy NpNBecTn K KOPOTKOMy 3AmbKaHnIO.

TemnepaTpa OkpykaUeI cpebl IJRA KcNpyataunn aKKMyJrTopa DoJIXHa 6bITB Dnana3OHe ot 0^ do 40^

B npocece BbInOpHeHn Oepaun, pni TemnepaTpa OkpykaIOUe Cpebl Iy XpaHeHn KOtOpbIX pexuay DeTaN bnn CoedHnTeNbHbIe aKKymJrTopa DOJXHa 6bItb B DnaJanaOHe OT 0^ do 3JIeMeHTb MoYr 3aTeB cKpbITbIe npoBoa, 20°C. ydepxHBaIe NHCpymEt 3a H3OJNPOBaHHyO 3aXBaTHyIO NOBepxHocTB. Pexuay DeTaN bnn TPAHCNOPTnPOBKA JNTNEBBix BATAPEIN COeHNHTbIe 3JIeMeHTb npu ConpIKoCHOBHm C npoBODko nOd HnprjKeHnEM MOyr nOlynt PaHCnOpTpuyte aKKymJrTopHyO 6aTaPeEO B 3JIeKtpueckn 3apRn n npuHHtB OepaTopy COOTBeTCTBn C MeCTHbIMN I rOcydapCTBeHHbIMN 3JIeKtpoTpaBMy. npabNJamN INoLOKeHnMn.

INPABNIA TEXHNI B3OINACHOCTN INCIOJIb- 3OBAHIN CBEPI

Pa6ooya ckopoctb He doJxHa npeBbIwaTb MaKcmaJIbHbI Hndekc ckopoctn CbePna. Ha 60nee BbICOKnx CKOpOCTx npn CBO6OHNOM BpaUeHn CBepNa 6e3 cOnpIKOCHOBEHn C o6paBaIbAeMoI DeTaIbIO NOBbIaETCB EpoarTHOCTb NCKPNBHeHn CBepNa I noLyEHN TpaBMbl.
Bcerda haunhaTe cBeprntb Ha Hn3Ko ckopoocTn,

Pn TpaHcnpTIpOBKe 6aTape TpeTbe CTOPOHO coBIOdaIte BCE CNEUaJIbHbIe Tpe6oBaHn I NO yNaKOBKe n MapKnipOBKe. PpOBepbTe, YTo6bl AKKyMnTOpHbIe 6aTapEn He BCTynaIN B KOtAKT C DpyrIMN 6aTapeA MIn NpOBoDmMbIM MaTePnaJAMn Pn TpaHCnpTIpOBKe, dIra 3TOrO 3aunITne OOrenHHbIe pa3bEmbl IN30JLaeNe, IN30JNpyuUmm KOnnauKamn NIn NeHTAMn. He nepeHocnte 6aTapEn C nobpeXdEHNMaM NIn yTeUKAMn. 3a DaJIbHeuMMN KOHCyJBtaUmaM N6paNTeCb B TpaHCnpTHO-3KcneDmUONHHO KOMNaHIO.

OCTATOUHbIE PNCKN

JaKe KOrda N3deJIne NcNoIb3yIOT CornacHO HNCTpyKUaM, HeBO3MOxHNO NOnHOCTbO yCTpaHNTb PaKTOpbl PnCKa CNeDyIOUne ONaCHOCTu MOrTy BO3HNKHyTb Bo BpeMaERO NcNoIb3OBaHnI, I BO N36ExKaHne IX pa6oHm D o6paTb OocObe BHIMAHHe Ha CJeDyIoUee:

Hapyuene Cnyxa BCNEcTBne yMOBOrO BO3deuCTBnA

-ncnoIb3yIte noxOJaUe cpeCTBO 3aunTbI opraHOB cnya.

NobpeckdneHn rna3

-Bcerda Hocnte 3aunTHbIe OcKn npn yctpoNCTBOM.

TpaMbbl, Bb3bBaemble Bn6paunei

-OrpaHnUbaIte BO3eJeCTBne. CJeNyIte HNCTpyKlIbM B pa3deNe «CHnxKeHne pncKa»

IopaKeHne 3NeKTpuecknTOKOM npn COnpNKoCHOBeHN COCKpbITbIMN IpOBOdAMN

-DepKInTe n3dJIe ToJbKO 3a N3OJIINPOBaHHbIe NOBepXHOCTN.

TpaMbbl, Bbl3bIbAembie nbIbnBIO

Пьл,обрауюаясьВВрмэкпунаци н3дел，在МожET npиВecNTК NOВржденIO opraHOB dIbIXAH.NcnoIb3yIte HaJIeXaUIO пьлзauTHYo Macky CФИьТРAMN, 3aIuHaOUMM OT ПpoHnKHOBEHЯ YacTNU obpaatbIbAemOrO MaTePnAna.

CHNXEHNPEOCKA

Coobauocb,TOBn6paunpyhblx3neKTPONHCTpymeHTOB yOTdIbHbIX NUC MOKET CNOOC6TBBOBaTb COCTOHNIO KOTOpoe Ha3bIbaetc CnHDPOM PeHNO.K CmTTOMAM MOrY T OTHOCHTBCN POKaIbIbAHHe, OHMeHNe I NO6eJIHNE naIbueB (kak npn nepeoxnaJckHNI.CuNTAOHACJeDCTBeHHbIe 0aKTopbl, OxJaXKeHNe IN BnAKe Deta, KypEnHe n pKaTnueckn ONbl CTNOc6CTBYOT pa3BHTNU 3TNX CmNTOMOB. HnKe npNBODrTCK KOtOpble MoKET npnHrTb OepaTOp dIra CHnKeHn BO3deCTBnB6paun:

OeBaITeB Tennee B xoJIoHyIO norOy. Ppi paBoTe C yCTpoiCTBOM NOJIb3yIteB nepuAtkAmn, YTO6bl pyKn I 3aIacTb8 6bln B TeNne. CHTaETc8, YTO XoJIoHna IoroJa ABJraTc8 OCHOBbIM PaKTOpOM, cnocobCTByIOUIM BO3HNIKHOBeHIO 60Je3H PeHo (Raynaud's Syndrome).
Iocne kaxdo 3ana pa6oTb BblnoHnTe ynpxHeHn nn ycnene H KpOBo06paueHn.
Yaue denaTe nepepbBbI B pa6ote. Cokpatnte DnNTeNbHOCTb exEHNHeBHOro npe6bHaHna HA OTKpblOM BO3dyxe.

Pn noBHeHn KaKx-Ni6o n3 yKa3aHHbIX CmNTOMOB cpa3y Je npekpatnte pa60Ty n 6paTneCb NO nx nobOy K BpaCy.

CTOPOXHO

PpOOnJXnTeJIbHoe NcONJb3OBaHne NHCTpyMeHTa 6e3 nepepbIbMaOKeT npNBecTu K TpaBMam. PpN IcNoJIb3OBaHmN HcTpMyeHTA B TeueHne DnITeJIbHO RpeMeHN DeaIte peyIrpHbIe nepepbIBbl.

N3yUHTEN3DENNE

Ctp 81.

1. IpeeknouateJIb nepeea
2. NpeeknouateBbicpTO BbIbopa pexHMOB
3. Kolbpo perynnpOBKN kpyTyeo MOMeHa 4. 6eckJIIOueBOI naTPOH
4. IpeeknouateIb HanpaBJeHb BpaueHn
5. Khonka zanycka c perynipobko knkopoctn
   7.Инданкатор
6. XpaHnIe 6ypa
   9.HacaIkaIJIyOTBeptKIN
7. THe3do noIokJIIOUeHn6aTapeN
8. Puyka, n30I npOBaHHa NOBepxHOCTb 3axBaTa

TEXHNUECKOE O6CJNYKUBAHNE

CTOPOXHO

Pn6bOp HN B KOem cnyae He DoJnxH NOcOeHNrTbcK NCTOCHNYI NTaHn, KOrDa Bbl pa3bnpaeteKOMNOHEHTbl, BblONHReTe perylnpOBky, OunchKy, npBOoNTe TexHnueckoe 06cnyxuBaHne, nIi Korda np6bOp He nCNoB3yETc. OTcoeINHeHne np6bopaN03BOJNT 3aunITb INCTpyMeH TcnyauHoro 3anycka, YpeBaTOrO cepbe3HbIMn fN3UeCKMm TpaBMamn.

eroEL

Pn npoBeHm Tekyuero pemOnTa nCnoJb3ynt ToIbKO nDeHTUHbIe 3aNCACTn. NcNoJIb3OBAHne TO dpyrnx 3aNacteM MoKeT npEcdTabIaTb ONaCHOCTb STb,nn NOBpeNTb I3dJIInA.
I36eraTe nCNoB3OBAHnpaCTBOpTene BO BpeM yNCTKN PnactMaCCOBbIX qAcTee.MHOrne PnactMaCCbl 乌BCTNBbHbIK BO3DeiCTBnHO pa3NHybIX 6bIOBbIX pactBopnteNe N B pe3yNbTaTe NX IcNOB3OBAHn MOryt pa3pyuNTbcR.C NOMOUsBO YnCToN TkaHN ydaJIte rP3bN yrOlbHyO nbIb.
HnKOrda He DOnyckaIte KOHTaT aTOPMo3HOJ KnDKOCTN,6eH3NuHa, PPOyKTOB Ha HeOTraHO OCHOBe, PpONITouHoro Macna n T. d. C NlAACTMaCCOBbIMU qACTmN. 3TH XMMKaTb COdepkAT BeuecTba, KOTOpbie MOryT NcNoptNTb,OCNa6uNb HIN pa3pyWntb pNactMacy.
Bcerda HadeBaTe npedoxpaHnteIbHbIe nn 3aunTHbIe OOKC 60KOBbIMn 3auTHbIMn EkapHaMn npaBoTe C daHHbIM nHCTpyMeHTOM nIN CdyBaHN nbJIn. Ecnn BO Bpem pa6oTbI o6pa3yETc MHorO nbJIn, TAKKe HadeBaTe Nblne3aunTHyIO Macky.
Дя 60Льш经 6e3oNaChOCTn n HAdexHocTN BCE peMOHTbIe pa6Obl DOnJXHbI npOBOnTbcR

aBTOpN3OBaHHbIM CepBnCHbIM LHeHTpOM.

CMA3KA

Bce noDunHnKn B n3DeNn Cma3aHbI DOCTaTOHyBM KOINHECTBOM BBICOKOCOPTHOH CMA3KN DnI npoONKNTeHbHO 3KcNpyatauIN N3DeJINB HOpMaNBbIX pa6OuNX yCNOBnX. P03TOMy dOnONHTenbHaR Cma3Ka He Tpe6yetc.

3AUNTA OKPYXAIOUCEI CPEbl

YtJIN3npyIe KaK cbIpbe, a He BbIbpaCbBaIte KaK Mycop. MaunHa, akCEccyapbl n ynaKOBka DOJIKNHb 6bITb OTCOpTnPOBaHbI.

YCJIOBHBIE OBO3HAUHIN

CnHnONaCHOCTN

COOTBETCTBnTpeboaHnM CE

VBoNT

IOCTOHHHbI TOK

min-1

O6opoTOB HIN BO3BpaTHO- NOCTyNaTeNbHbIX DnBHXeHN B MmHyTy

Han60nbun dnaMeTp cBepna B natapohe

Ckopoocb6e3Harpy3kn

3HaK EbpaaNCKORO COOTBETCTBnA

Ipeed nCnoB3OBAHnEm npi6opa BHIMATEbHO O3HaKOMbTEcB C DaHHo HNCTpyknei.

YkpanHckn 3naK cTaNdapTN3aUN

001

BezydapHoe cBepnene

3aHHuBaHne

Дрел уларно Deиства.

Otpa6oTaHHa 3JNEKTPoTeXHnuecka npOyKUNA DOnkHA yHnHToxaTbcra BMeCTe C bIbTOBbIMN OTXdAMN. YtINn3npYte,ecnN NmeeTcra CneuNaIbHOe TexHnueCKoe o6OpyDoBaHne. IIO BOpocam yTNIn3aUIN PpOKOHcyNbTppyTecb C MeCTbIM OprAHOM Bnactn INI INPepnPaTHe mPo3HNHOTOPBOHn

OB03HAUENB PYKOBODCTBE

PpmeaHne

OctopoxHO

TnnpHaNEXKHO npno6petaembe OTeJbHO

MaKcImaJIbHbI KpyTЯUIM MOMENT

KpyTAnMOMeHT, MmHMaJIbHbI pa3Mep

CKOPOCTb, MHHMamlbHaa

CKopoctb, MaKcImaHbHa

CneIyUoIe CnHbHbIe CNoBa 3HaueHna npedHa3HaueHbI, YTO6bl O6bYCHNTb yPOBHN PnCKa, CBraHHOrO C3TNM N3JeHMe.

ONACHO

Yka3bBaet Ha noteHuaJIbHo ONaChyO CuTyauNIO, KOTopra, ecn ee He n36exKaTb, npNBedeT K JeTaIbHOMy NCxOdy nI IN cepBe3HO TpaBMe.

OCTOPOKHO

Yka3bIbaet Ha noteHuaJIbHO onaChyIO cITyaUIO, KOtOpAra, ecn ee He n36ExaTb, MoKeT pInBecTeKJIeTaIbHOMy IcXOdy nn CepBe3HO TpaBMe.

BHIMAHNE

Yka3bIbaeHaNoTeHcuaJIbHOOnaChyIO CHTyaUHO, KOtOpaR,ecnEe He N36ExKaT,MOKeT pnpBecrK TpaBMe JERKO INN CpeDHeT TReKCTN.

BHIMAHNE

(Be3 CmBona TpeBorN Be3onacHocTn) Yka3bIbaet cnTyauuio, KOtopa MOKet KOHcTaBCa NOBpeXdeHHeM CO6CTBeHHoCTn.

TpaHcnpoTpOBka:

Kateropnueckn He donyckaetra naeHne n lio6bIeCpok cnky6bln3denncoCTabJIaT 5 net.

MEXAHNueeCKne BO3DcNCTBnHa yNaKOBky npN

TpaHcnpTnpoBKe.

Ppi pa3py3ke/norpy3ke He donyckaetc nCnoB3oBaHne IIO6Oro BnDa TexHnKn, pa6OtaIooJIe NO npHHuNy 3aXnMa ynaKOBKn.

XpaHeHHe:

HeoXoDIMO XpaHntB C yXOM MeTe.

Heo6xoDIMO XpaHnTb BdAaNOT NCTOCHNKOB NOBblIeHHbIX TEMnepaTp np BO3DeIeCTBna COJIHeuHbIX Iyuei.

Ipn xpaHEnn Heo6xoDIMO n36eRaTb pe3KOro nepenada TeMnepeatyp.

XpaHHeHbe3 ynaKOBKn He dOnyckaetc.

Data n3rOToBnHeHn (KoI DaTbI) OTWtAMnOBaH NOBepxHOCTN KOpnyCa n3dEJIIN.

Pnmep:

W17 Y2015, rnde Y2015 - roj n3roTOBJeHn

W17-HeIeIa n3rOToBJIeHnIa

OnpeJntb Mecau N3ROTOBHeHn MoXHo corNaCHO npueHHo Hxke Ta6nue, Ha npimepe 2015 roda.

06paTHe BHNMaHHe! KOnIueCTBO HeJeB B MeCrae pa3NuaeTcA OTo rOda B roD.

m = 311

VISU DARBU VEIKSMU SAUGOS INSTRUKCIJOS

Dirbdami darbus, kuriu metu grezimo antgalis arba tvirtinimo detale galetu prisiliesti prie pasle laidu, laiky kite elektrinj jrankj tik uz izoliu pavirsiu. Grezimo antgaluii arba tvirtinimo detalems prisilietus prie "gyvo" lado, neizoliuotos metalino elektrinio jrankio dalys gali sukelti elektros s nutrenkti operatoriu.

SAUGOS TAISYKLES NAUDOJANT ILGUS GRAZTUS

Niekada nevirskykite graztui numatyto maksimalaus greicio vertes. Esant didesnems greicio vertems, laisvai besisukantis, ruosinio nelieciantis graztas gali sulinkti ir jus suzialoti.
Visada pradekite grezti mazu greciu, graztto galu liesdami ruosinj. Esant didesnems greicio vertems, lainsvai besisukantis, ruosinio nelieciantis graztas gali sulinkti ir jus suzialoti.
Greztuva spauskite tik tiesia linja, isilgai grazto, ir nespauskite per stipriai. Graztai gali sulinkti ir luztti, arba galima nesuvaldyti jrankio ir susizaloti.
Irankio darbinés aplinkos temperatūros diapazonas nuo 0^ iki 40^ .
Irankio sandeliavimo aplinkos temperaturos diapazonas nuo 0^ iki 40^ .

Rekomenduojamas jkrovimo sistemas darbinés aplinkos temperaturos diapazonas nuo 10^ iki 38^ .

PAPILDOMI AKUMULIATORIAUS SAUGOS [SPÉJIMAI]

me

buti

APÉJIMAS

OCHRANA ZIVOTNÉHO PROSTMEDIA

IPEdYIPEXKDEHNA 3A BE3OJACHOCT IPIPABOTA C YDAPHATA BOPMAUNHA

NHCTPYKUN 3A BE3ONACHOCT 3A BCNUKN ONEPALIMN

Дрьжт eelenKtpnueckn nHcTpyment 3a N30InpaHNTe NOBbpxHOCTN 3a XBaUaHe, KORATO N3BbPWBate OepauJN, npN KOrTO pexeunrt akcecoap NIN KpEnExHHte enEmeHTN MOXe BJIa3T B KOHTAKT CbC CKPITN nPOBOHNu. PexeU akcecoap NIN KpEnExHH eJEMeHTN, KOINTO B KOHTAKT C nPOBOHNK, NO KOINTO TeUe TOK, IDOBdATo Do npOTnHa ToK No HeIN30InpaHNTe MeTaJIHn Yactn Ha eJENKTPnueckn INHCTpymENT n da npuHnRT TokOB yIap Ha onepaTopa.

HNCYKUIN3ABE3ONACHOCTIPNUN3NOJ3BAHE HAIbJIINCBPEJNA

Hnkora He pa6oTe c no-BncoKa ckopoCt ot MaKcmaJHaT a 3a CBpeJIoTO. Ppi NO-BnCOKn CKOpOCTN CBpeJIoTO MOKe Da Ce O'rbHe, Ako Ce BbpTN CBo6oJHo, 6e3 Da BnIm3a B KOHTaKT C pa6oTHnA DeTaJn, I da DoBeDe Io fN3uCeCKn HapaHraBaHna.

Bnhar 3anoBaIte da npo6nbate npn Hncka ckopoCT n BbpxbT Ha cBpeJnoTo da 6bDe B KOHTAK C pa60THN aTeaII. Pn NO-BnCOKn CKOPOCTN CBpeJNOTO MOKe Da ce ObHe, Ako Ce BbPTN CBO6oJHo, 6e3 Da Bn3a B KOHTAK T pa60THN aTeaII, I Da DOBeDe Do fnsueckn HapaHbaHH.
YnpaXnBaTe HaTnCK CbC CBpeJIoTO CaMo BnPpAaJIHHN aHKnOra He HaTnCKaIte NpeKaJeHO MHOr. CbpeNaTa MoKe da ce orbHaT n da npuHnTcchynBaHe nn 3ary6a Ha KOHTpO n BNocNeDCTBneΦn3NuEcKn HapaHnBaHn.
IДиаэзовтHa OKONHATA TemnepaTypa npu pa6Ota c HNCTpyMeHTa e Mekdy 0^ n 40^
Hnana30hT Ha OKoJHaTa TeMnepaTypa npn HxpaHeHne Ha HnCTpyMeHTa e MeKdy 0^ n 40^

HpenOpbUHTeHNHnT DnHa3OH Ha OKoJHaTaHa HnHa TEmpepaTpy npu 3apeXdahe Cbc 3apraHaTa CnCTema e mexdy 10^ n 38^

DONbJIHNTeJIHN PDEyIPPEXJEHn3A B630JNACHOCT 3A BATEPnYTA

REyIpyEKeXDEHME

3a da n36eHHeTe onachocT Ta OT noXkap, npedn3BnKaHa
OT KbCO CbeDInHeHne, KaKTo N HapaHbAHHaTa N
NoBpeDInTe Ha npOdyKTa, He NotanJaTe IHCTpyMeHTa,
CmehemaT akyMylatopHa 6atepna NIN 3apdHOTO
yCTpoiCTBO B TeuHOCTn I ce NorpnjKeTe B ypeDInTe
N akyMylatopHnte 6atepnu Da He nonaDaT
TeuHOCTn. TeuHOCTte, PpeDn3BnKBaun KOp03n NIN
PPOBeJdaun eJeKtpnueCTBO, KATO CoNEHa BOda,
ONpeDeJIeHN XIMUKaUN, n36eJIbaUN BeUeCTBa NIN
PpOdyKTn, CbIbPxkaUN n36eJIbaUN BeUeCTBA, MoRAT
Da npPeDn3BnKAT KbCO CbeDInHeHne.

IiHa3oHbT Ha OKJHaTa TemepaTypa npn 3nON3BaHe Ha 6aTepeyrae Mekdy 0^ n 40^
Iinaa30HbT Ha OKJHaTa Tempeatypa npn cbxpaHeHne Ha 6aTeepraTa e MeKdy 0^ n 20^

TPAHCIOPTIPOAHE HA JINTNEBNI BATEPIM Da

TpaHcnpToPpAte 6aTepeNTe B CbOTBeTCTBNE C MeCTHnTe

OraT Da Cn3BaHTe BCNUKn CneuuaHn N3NCKBaHn 3a NaKeTnpaHe N eTNKeTnpaHe, KOrTo TpaHcNopTpate BaTePN Ype3 Tpeto IInue. YBepeTe Ce, Ye BSeTpPnTE He BIn3at B KoHTaKT C npTu nB aTePN INI npOBODM MATEpAIN NO BpeMe Ha TpaHcNopTpnpaHe, KAto NpeDnaNTe OTkpNTte KoneKTOpN C n3OJauNa, HEnPoBODmN KAnaHeta INI NeHTa. He TpaHcNopTpauTe BaTePN, KOtO ca CnyKaHN INI TEkAT. CbbpXeTe Ce cbc CneHaTa KOMNaHn 3a DOJIbHITeJeH CbBET.

HENPREBVDENPCKOBE

Iopn Korato npOyKtBt Ce n3noJ3Ba no npEHa3HaueHne, e HeBb3MOxHO HanbJHo Da ce orpaHnU BnOnpeJeHn pNCKOBn paKTopn. Morat da Bb3CNeHNTE OnaCHOCTn n OepaTOpBt Tp8Ba daOCo6eHO BHUMaHne, 3a da n36erHe:

Ybpejdahe Ha cnya B cneCTBne Ha n3nahe Ha Wym.

-HocTe aHTnfoHn n orpaHueTe n3JaTaHaTeO.

HapaHraBaHe Ha OuTe

-Hocete Macka 3a npedna3BaHe Ha OHTe npedna3Hn OUnHa, KORATO n3non3BATE npodykTa.

HapaHaBaHe, npuHHeHO O TB6paIa.

-OrpaHueTe n3naraHTo. CneDbaIte yka3aHnraTa B, HamajBaHe Ha pncA".

TOKOB ydap cnei KOHTaKT CbC cKpTN Ka6eJI

-ДрькTe npOуКТa Camo 3a n3OINpaHnTe NOBbpxHOCTN.

HapaHbAHn, npuHHeHn ot npax

-Прахьт, reнериран пп работа с пpoукта, можда пчинп респиралго урждaine. Мackа 3a КОНТРОЛИРане Ha npaxa C Фntprn, когTO може д BA Bn прдпзOT пax OT MaTePINAJI, ВьрXY когTO pa6OTITE.

HAMAJRAHE HA PNCKA

N3BecTHo e, ye Bn6paunTe, npOn3BeJdAnH OTHCTpymENT MoKe Da npEn3BnKAT y HrkON 3a60JIbaHe, HapeHo CnHIpom Ha PeiHOJ (Raynaud's Syndrome). CmIMTOMnte MOKe Da BKNIObAT n3TpbnBaHe, CXBaUaHe N36NeDHNBAHe Ha npbCTnte, o6NK ce 3a6en3Bat npn H3NaIarHe Ha CTyI. CMrTa HacJeCDTBHeNTe pakTopu, n3NaIarHeTo Ha CTyI n BNara, dIneTne, nyweHeto HrkON pa6Othn HabuN DoOpnHacrt 3a pa3BHTeTO Ha Te3n CmIMTOMn. Morat da CE B3emAT HrkON MepKn, KOnTO MORAT da CE npEipnEmAT OT onepaTopa, 3a da CE Hamanr T efeKTnte OT Bn6paunTe:

IpoIbpaKeTe TeneChata TemnepaTpya B cTydeHO BpeMe. Korato 6opABNTe C nHcTpymEHTa, HocetepbKaBUN3a Da IIOIbpxkate PbUeTe N KNTKNToNN.CnopeN uCneDBAHnRnaBnRT pakTOnpInhAcu 3a pa3BntNeTo Ha Raynaud's Syndrome, eCTyDEHO BpeMe.
Ppabete ynpaxKHeHn 3a akTNBn3npaHn KaBBoo6paueHneTO CneD BCEKn pa6OteH nKbl.
PeIOBHO H3nH3aTe B NOuVBka. OpaHueTe H3naHaTe Ha Bn6paun Ha DeH.

Pn noBa Ha hKoON CTcMNTOMtHe HToBa 3a60JBAHe, He3a6abHo npekpatete ynoTpe6bTa Ha HnCTpyMeHTa nocetete nekap.

A PEPDyPPEXDEHNE

PpOdbJNkntHHTO 3NOJ3BaHe Ha HnCTpyMeHTaMOKe Da DoBeDe Ho HapaHbAHn HnBn

Pn H3non3BaHe Ha HcTpyMeHtA 3a npOdbJxNtEnHn

ONO3HAITEBAWINIPOJKT

Bx. cTpaHnua 81.

1. BytoH 3a n36op Ha npedakkata
   2.Бутонзиборнбьрз ржIM

8nPbCTeH 3a peryInpaHe Ha BbptraMOMeHT

1. Be3KnIOyOBa ZHaHa
2. Bytoh 3a n36op Ha noCOKATA Ha BbptHe
3. Cnycbk C npomeHnBa ckopoCT
4. LED CBETJINH
   8.CbXpaHHeHnHa HauKpaHnUHTe
5. HakpaHnK 3a OTBeTpKa
6. THe3do 3a 6aTepeyra
   11.Pbkoxbatka, n30Jnpana noBbpxHOCT 3a3axBaune

IODPbJXKA

Hocere

A PEPdUnPExKdEHNE

IpoDyKTbT He Tp8Ba HnKora Da ce BKnIOyBa B 3axpaHbaHe, Korato CrNo6BaTe Yactn, npaBnte HaCTPOkN, NOYcTBeAte, N3BbPwBaTe NoApBxKa IIN Korato He ro n3noJ3BaTe. N3KnIOyBaHeto Ha IpoDyKTa OT 3axpaHbaHeto Ue npedOTbpatn CnyauHo
TnpeHe, KOeTo 6n MOrNo Da npuHn Cepno3Hn
TR
E1

EN

FR

GbaHE.

ES

IT

NL

PT

DA

SV

F1

NO

RU

PL

CS

HU

RO

LV

IT

ET

HR

SL

SK

BG

UK

HIOI pemOH n3noJI3BaIe cAmO nIeHTnUHn pe3epBHN ce, qA. H3noJ3BaHeTo Ha npyTu qactu MoKe Da Bn NOCTaB BN ONaCHOCT UIN Da NOBpeDn npOdyKta.

136raBATEH3NOI3BAHETOHa pa3TBOpHTeIN npn NOHCtBaHETO Ha NlactMacOBITE qactN. NoBeeTo IAACTMACn Ca YyBCTBEJIHN KbMa pa3JNUHn BINOBE pa3TBOPHTeIN MoKe Da ce NOBpeJr PtN 3NOI3BaHTo HA TAKIna. H3NOI3BaTe YnCTN KbpNn 3aOTcPaHbAHe Ha 3AmBpcBaHn IN BbIpeODeH.
B HnKaBcnyaH He No3BoJBaTe NactMacOBte
YACTN Da BnI3AT B KOHTaK TcBc CnnpaHn TeyHOCTN,
HePTeHN npOdyKTn, npOHnKBaUu Macna n T.H. Te
CbIbPxkAT XmMueckn BeueCTBa, KOnTO MoRat da
NoBpeJrT,OTcNa6rTnn Pa3pyuWt NactMacata.
Bunharu Hocete npedna3Ha macka nIn ouina cbc CTpaHnHn ekpAHn, KOrato 6opabnte C mexaHn3npaHn INCTpyMeHTn nIn n3dyXbATE npax. Ako npaP6oTata ce OTdEJa npax, n3non3BaIte n Macka 3a npedna3BaHe OT Hero.
3a no-roJrMa 6e3onacHocT n HndexKHOCT BCNUKn peMOHTn Tp8Ba Da ce N3BbPWBat OT OTOpuHa cepBn3.

CMA3BAHE

Bcnu nape np BTo3n npOdyk3a Cma3aHn CdoCTaTbHo KOJIueCTBO BNCOKOKaueCTBeHO MacNo, KoETo Tp6Ba Da cTNHe 3a ZeINr EKCNIOataUMOHe XNBOT Ha INCTpyMeHTa npn HopMaJHi pa60THyCJIOBn. 3aTOBa He e HEOxOJIMo DOnbHInTeJHO CMA3BaHe.

ОТАЗВАЕ HA OKОЛHATA CРEDA

PeuKlnpaHe Ha cypOBHH, BmecTo 3a o6e3bpexdahe KaTO OTnAdbK. MaunHata, OONBJHNTEIHNTE npncnocO6JIeHn I ONAKOBKITE Tpr6Ba Da 6bDat NOJIOXKeHn Ha nOxOJaI npepa60tKa 3a ONON3OTBOPBAHe Ha CbIbPkaUHTe Ce B T8X BTOpNCHcypOBHH.

CUMBOJIN

IpeDynpexdEHe OTHOCHO630nachocCTTa

CEcbOTBETBNE

V HanpekeHne

NoctoHToH ToK

min

O6opOTN INIIN Bb3BpaTHo-NOCTbNaTeHNH DnKHeHH B MmHyTa

0

KanaunTeHaaHrata

Ckoocst6e3HaTObapBaHe

EurAsian 3HaK 3a CbOTBeTCTBnE

Ppoetete HNCTpyKunTe BHNMaTeHNO, npEn da cTaptnpate MaunHaTa.

YKpaHHckn 3HaK 3a CbOTBETCTBNE

Yka3Ba noteHuaHNO onaCha cTyaun, KOrTo aKo He 6bIe n3BeHata, MoKe da doBede Do dpeHn nn CpeHn HapaHaBaHn.

BHIMAHNE

(Be3 npdynpeDnteneH cMBOI 3a 6e3onacHOCT) Yka3Ba CHTyaun, KOrTO MOKe Da DOBeDe Do HMyuecTBeHN UetN.

Be3neci, npodykTBHocti i haiiHocTi HaaHni npiopntET Bn3aHi BaWoI yapHa dpInb.

BUNIcBepnO, WBNUe 3a BCE, 3irHeTbcra, RkIO 6yde Do3BOJeHO BInbHO o6epTaTncra, 6e3 KOHTaKry i3 3arOTOBKOIO, IO MOKe IpuN3BeCTn Do TpaBM.

PNU3HAUHNN

Ley yapHn Dpnlb np3haeHn IJy BkOpctAHn TINbKn DopocnMn, kI qntan i 3po3ymi n IHcpyku nonepdkeHHB CbOMy noci6hky i MoKyb BBaKaBidiNobdaNbHMn 3a CBOI II.

HaTnckaIe IInse Ha npMy YacTHHy CBepdna

i He 3actocobyTe HAdmipHn Tnck. CbePna

MOxuyTb 3rHaTnCra, IIO npu3BeDe Do nolamKn a6o

yKU BtpaN KOHTPOH, B pe3yNbTaTI YORO MOXHa OTPMaTIN Kxata TpaBM.

YdapnI Dpnlb Pnp3NaueHn IJRA CBepDneHHa MaTepiAIB, BKNIOUOuN DepeBO, MeTaN, NlaCTNK BIKOPINCTAHNM CBepDna, 10Ma DCiametp MeHwe, HIX 13 MM.

pi3 i 3

Diana3OH TemnepaTyprn HABKONHbOre cepeOBua DnI npictpoi nd yac 36epirAHnB BID 0^ do 40^

Pnpo6oTi B ynapHomy pexKmi, ynapHa dpnilb MoXe 6byuBnKOpNCTaHa Dnra CbePdIeHHK KlaKn i NOIDHIX PekOMeHIOBaHni diana3OH TempepaTpyn 3OBHIuHbO r MaTepiianib.. B pexKmi 3aBnHcyBaHHy, ynapHa dpnilb CepeIOBuIa dny CNCTeMn 3apJxKaHH nD qac MOKe BnKOUPOTOBVBAHTCg Dnra 3aBnHvBAHHg FBNHTB

ДяdoB6aHЯ Ta CBepdneHHa KaM'HaOH KJaDKN, 6yTN BnKOpNCaHn peXm MoNtKa.

TEXHIKA B63NEKINPNI EKCNIYATAUAKMYJTOPHOTBATAPEI

TNEPEDXEHH

PpOHTaTe Bci npabnla 6e3neKn, IHcTpkyuii, iInoctpauii i cneunphiauii, 0o nocTabnIOTbc3 eNekTPOIHCTpyMeHToM. HeDToPMaHHBcix 3a3NaueHx IHcTpkyuIM MoKe pni3BeCTn Do ypaKeHHeNekTpnuHm CTpyOM, NoXeKi Ta/a6o cepNo3Hx TpaBM.

36epexitb Bci iHCTpykuii i Bka3iBkn dna Ma6yTHboro BNKOpncTaHH.

TNEPEXEHNA

Дя 3anobirahn He6e3neu noxekxi B pezylbata KopoTKoro 3amKacHH, TpaBMam i NookoJKeHHO Bnpoib He 3aHypouTe IHcTpymeHT, 3mHnn akymyIaTOP a6o 3apdHni npictpi y piHy donyckaIte NotpanJIHH pIDHN BCEpeDHy npCtpoIB a6o akymyIaTOPB. Kop03iHi i cTpyMOnpObiHi piHN, Taki JK coNoHNI po34HNI, NEbHI xIMiKaTu, BN6IIHOBaJIbHi 3aco6n a6o npOdyKTU, IO IX MICTaTB, MOxYb npN3BeCTN DO KopoTKoro 3amKacHH.

IONEPEJXEHH3BE3NEKNBVKOPNCTAHH YAUPHOIIPNI

PABNJATEXHIKBE3NEKNDBBCIXONEPAUIN

■ПдчacВнКоHAHHЯОпацii，Bякій pixуyme npinlaДЯ a60 кріиьньн Bnpi6 moKyTb KOHTaKtYBaTn 3 npnxOBaHOIO npOBOdKOIO, TpimaiTe eNeKtpoiHCTpyMeHTiJbKn 3a i3OJIbObaHi nobEpxHI.Пдчac KOnTAkTy pIXyUro npinlaДЯ a60 kPinnIbHnx Bnpo6iB i3 npOTom nID HanpyRO, Hanpyra TAKOK MoKe nepeDaBaTncr Ha MeTaJIeBi cak eNeKtpoiHCTpyMeHTy nID HanpyROI KOpNCTyBaH Moxe 6byTN ypaKeHm eNeKtpuHm CTpyMOM.

IINPABNIA TEXHIKN BE3NEKN IPN BIKOPNCTA IOBIX CBEPEN

Hikonn He npaoute Ha 6ilbW BnCoki Wbnkocti, HIX 3a3haeHa DnA CBepDnA MaKcMaIbHa WbndkicTB CBepDnIHn. Ha 6ilbW BnCOKnx WbndkocTAX, CBepDnO, WbnDwe 3a BCE, 3irr KIO HiOMy 6yde Do3BoneHO BiNbHO oBeptatncs, 6e3 KOHTaKTy i3 3arOTOBKOHO, Mo MoKe npu3BecTu TpaBM.
3aBxDn nouHaIte CBepDnIHHa Hn3bKiWNbDKoCTi, KOJIHakoHeuHK CBepJa KOHTaKTyE 3 3arOTOBKOIO. Ha 6inbBnCOKIX WBNDKOCTA

Диаэн Temпетурн HabkonHbOre cepeDObuza ДЯ akymлтopa πiД yac BnKOpNCTaHHr mix 0°C Ta 40°C.
Diana3OH TemnepaTp 30BhiHbO rocepeoBua nIqac 36epiraHHa kymyTota mix 0^ ta 20^

TPAHCIOPTYBAHHJITIEBHX BATAPEI

TpaHcnpTyTe 6aTapeIO BiINOBiIDHO IO MICeBux Ta HauioHaIbHnX nIoKeHb Ta npabIn.

HOTpmytebc ycix cneiaIbHNBIMOR 0do naKyBaHH Ta MapkyBaHH npn TpaHCnoptyBaHHi 6aTapei TpeTboo CTopoHO. PepeKoHaTeCra, 0o 6atapei He MoKytB BCTynATN B KOHTAKT 3 IHuMn 6aTapeMn a6o npoBIDHMn Maepianamn npn TpaHCnoptnpOBUci, 3axuauOuN BiDkpnti po3'EMn iOJLHMMn HEnpOBOJaUMM KpuKAMn a6o cTpiKoIO. He nepeBo3NTn 6aTapei, kki MaTOb TpiuHn a6o npoteuk. KoHcyIbTyIeTecr 3 ekCneITOpcbKOIO KOMnaHIEO DJI NOaJIbXkOHcyIbTaui.

3AIIHKOBI PN3IKN

Habib KOLIN npOdyKT BKNOPNCOTByeTbCRA HAHCaHO, 3aIIuMaTeBcHemoxKnBIM NOBHCTHO yCyHyTN DeAki 3aIIuKoBI YHHNKn Pn3Nky. HactynHi He6e3NeKN MoKyTB BHNKHyTNI onepatoP NOBHeH 3BepHyTN Oc0bNBy yBary,

UOyHmKHyTu HAcTyINHO:

I OuKoKeHHcLyXy, BnKnKaHe yMOM

-HaIraIte 3acO6n 3axncty nIraOpraHIB cIyxy Ta IimityTe BnINB.

TpaBMyBaHHOuei

-Hocitb 3axnchi OkyIpyn a6o okyIpyHInBnKOpncTaHn npOdykTy.

TpaBMn, BnKnKaHi Bi6paCiieio

JIMITYe BnINB. DOpTpMMyTEcB IHCTpyKci, 3a3HaueHnx y po3di «3MeHHeHHr pu3NkY»

YpaxKeHHe eEnkTpnuHm Ctpymom uepe3 KOHTaKt i3 npNXOBAHm IpOBOdAmn

-TpmaTe npoDyKT TiIbKn 3a iOsbObHi nobepxHi.

TpaBMN, BnKNIkaHi NJIOM.

-Пил,якн CTBOPHOTbC npn BHKOpuctaHHI Bnpo6y,

MOKe Ipn3BecTN Do TpaBMn DnXaJIbHNX

HaiaTe BiIOBIDHy NINO3axnchy Macky

fijbtpom, npndaTHM dna 3aTpMaHHa

MaTepiany, 0o o6pO6nIOeTbcra.

1. Ipeemnkaun uBvdkichoro peximy
2. PeryIIOBaJIbHe KINbIe KpyTHOrO MometHTy
3. NatapoH
4. Hanpymok o6epTaHHc eJIeKTopa
   6.Пусковий raayok 3perylnobAHm WbUdkocti
5. CBd cbitno
6. Micue nra 36epirahn6iTn
7. MiHHe Ie3o wypynokpya
   10.ГиздяakумлгTopa
   11.Pyka,izonboBaHa nobepxHryIytpMaHHa

OECIpyOBYBAHH

PONIEPEIXEHNA

IpoDyKT He IOBHNH 6bynPiDKNIOUeHNI Do |DkepeNa

JINBHeHHa, KOIN Bn 3bnpaeTe DeTani, perynioTe,

YnCTTe, npoBOnTe texHicHe 06cnyroByaHHa 60

KoPi npOdyKT He BnKOpNCTOByeTbcra. BiKnIOUeHHa

IpoDyKTy DOnOMOKe yHKnHyTN BnnaKOBOro 3nycky,

JAKN MOXe Ipn3BecTn DO cepNo3HNx TpaBM.

3HIXEHHI PN3IKY

Nobidomlaioe, 0o Bi6paui BiD pyHnx iHCTpyn neBHX oci6 MoKyTB cPnraTn CTaHy, kNn Ha3 CnHdPOMOM PeHNO. CmNTOMM MoKyTB BKNHOATNI KOKIOBAHH, OHIMHH I 36JIiHeHH naIbUcI, Rk npABnIO, OeBnHi npn BnIBi XOIOy. CnaKOBi fakTopni, XOIOy IBORKocTi, DiTa, KypIHnI pOboa npaKTnKa, Bci Li qHHNKn PO6Jr bCBI BHECOK y Po3BtOK uX CmNTOMIB. Lz 3axOu MoKyTB 6yTu npnHrti onepaTOPM, MOKINBO 3MeHNTH BnNB Bi6paii:

TpmaTe TINO B TenoNl B xonoHy norOdy . Pnp Eeknlyataui npnaLy, OJraTe pykabuKn, uo6 TpmaTy pky i 3an'acty TenoI. NobidomlnocA, 0xonoHa noroDA c OCHOBHM qHHKOM, CnHdpomy PeiHo.
■IicnaKoXHoro nepioody po60Tu,3diinCHOnTe BnpaBNn niiBnueHH KpOBoo6iry.
Poibt b qacti nepepBn B p60ti. 3p6itb o6mkeHHa KJIbkocti BnNBy Ha deHb.

IpioucbnyrobyaHHi BnKOpNCToBMyTe TlNbKn iDeHTNHI 3anachi YactHH. BnkOpNCTaHn8 6yDb-yaNX iHnx DeTaneMe MoKe CTBopNTn He6e3Neky a6o cnpuHnHTn

ENTIBNOMOKOJKeHHN pOdyKTy.

BaETbcra

He BnKOpNCbOByTe po3yHHNkI DIA OCHIeHNN PnactMacOBHX DeTanei. BiJbUcIb nnactMac PP23A 10 -pixuX Fuaip -KoMOPHuiHx -PoeHHH

BnIpa3JIbBa 10 pi3Hnx BNIDIB KOMepuiHx po3

i MoKe 6yTn NowKoJKeHa ix BnKOpNCTaHHaM. BnKOpNCTOBuYte uHCTI rAnHupKn dJaBnDaJIeHHa 6pydy 06 ByrInbHorO nny.

Hikon He do3BONaIte raIbMIBHi piINHi, 6eHNHy, npOdyKTam Ha oCHOBI haΦTn, i npOHNaOuHM MacnAm BCTynatn B KOHTAKT 3 nlaCTNKOBUM DeTaIaMn. BOH N MICTaTB xIMiHi peOBOHH, kI MOKyTb 3aUKOJNTn, CnpNcNa6ntn a60 3HNIuTN pnaCTNK.
3aBXnHaJaTaTe 3axncHi OkyIpa n a6o 3axncHi OkyIpa n 3 6iHmN uNTkAmn NiJ Yac po60Tu eNeKtpoiHCTpyMeHTa a6o npn 3dyBaHHI nnny. RaKuo po60Ta NnBHa, TaKoHocItb 3axnChy Macky.
Дябьwoi6e3nekn i HadiHocti, Bci peMOHTi po60Tu NOBHHI BUKOHyBaTnCBA ABTOPu3OBaHOMy

KuO Bn BiDyBaTe 6yB-ryi 3 CmITOMIB UbOcTByBichOMy LcHTpi.

HeraHNo npnHHItb BnKOpncTaHHN i 3BepHiTbcNdo Niikapra

3 LIMN CMMITOMAMN.

NONEPEDXEHNA

TpBae BnKOpNCTaHHI HCTpyMeHTy MOKe BnA a6o nocuHttn TpaBMn. PnBnBnKOpNCTaHHI HCTpyMeHTy npotrrom TpBaNo rno nepioy, po6iTppeynapHn nepepbn.

3MAUyBAHHY

Bci niiinHnK B npdykTi 3MaueHi DoCTaTHbOIO KJIbKiCtIO BnCOKoiKICHO MaTIna IIN BcBOI TepMHy Cny6u BnpDyKTy np HOpMaJbHnx yMObax ekcnnyataci. TaKIM

3HAHTECBIINPPOYKT

ДиВ.стор. 81.

1.перемпа чпебач

72 | ykpaIHcbKa MoBa

3AXNCT HABKOLINHbOTo CEPEIOBUNa.

Ipeepo6nIe CnpOBHy 3amictb ytniiaaii B kocti BiXOIB.MaunHn, obnadhaHHy npakobka noBHHi 6yTu BiDCPTOBaHI dny dpyKhboi DnHaBKOINHbOro cepedOBuza ytniiaaui.

CNMBOJIH

PonepeJxehn6e3neK

CEBIDIOBIDHICTB

V BoJbTu

IociiHn CTpyM

min

06epTu a6o 3BOpToHo-noCTynanbHi pyxu y XBUNHy

Notykhictb naTpoHy

KpyTHM MOMENT, MaKcIMaBHH

KpyTHM MOMENT, MIHIMaJIbHNI

UBnKicTb,MIHImaBHa

UbNkictb, MaKcImaIbHa

HnKcBka3aHi nonepeJxJaJIbHi cNoBa Ta CnMBOJn NOrCHIOBTb pIeHb pnI npOToI 3 UIM npUJaOM.

HEBE3NEKA

Bka3ye Ha HEMMHyHe He6e3neHy CnTyauio, JaKa, KaIoo II He YHNKHTN, MoKe npu3BecTu DO CmepTi abo cepno3Hnx TpaBM.

NONEPEDXEHH

Bka3ye Ha notehuiHo Hebe3neuHy cnTuayiHO, kKa, kKIO II He yHnKHTN, MOKe npn3BecTN do CmeptI a6o cepno3Hux TpaBM.

YBAGA

Bka3ye Ha noteHuiHo Hebe3neuHy cnTuaio, kka, kkuo ii He yHnKHyTn, Moke npn3BeCTn Do cepenhboi a6o nEkoiTpaBMn.

YBAGA

(Bε3 CmBony nonepeJxKHeHn np He6e3neKy) Bka3yε Ha cnTyauio, yka moKe npNBecTn Do MaTepiJIbHnx 36ntkiv.

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.

FR AVERTISSEMENT

In addition to any statutory rights resulting from the purchase, this product is covered by a warranty as stated below.

1. The warranty period is 24 months for consumers and commences on the date the product was purchased. This date has to be documented by an invoice or other proof of purchase. The product is designed and dedicated to consumer and private use only. So there is no warranty provided in case of professional or commercial use. This warranty applies only on new products.
2. There is a possibility to extend for a part of the range of power (AC/DC) the warranty period over the period described above using the registration on the www.ryobitools.eu website. The eligibility of products for extended warranty is clearly displayed in stores and / or on packaging and is contained within the product documentation. The end user is required to register his/her newly-acquired products online within 30 days from the date of purchase. The end user may register for the extended warranty in his/her country of residence if listed on the online registration form where this option is valid. Furthermore, end users must give their consent to the storage of their personal data that is required to be entered online. They must also accept the terms and conditions. The registration confirmation receipt, which is sent out by e-mail, and the original invoice showing the date of purchase will serve as proof of the extended warranty.
3. The warranty covers all defects of the product during the warranty period due to faults in workmanship or material at the purchase date. warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages. The warranty is not valid if the product has been misused, used contrary to the instruction manual, or has been incorrectly connected to a power supply. This warranty does not apply to:

any damage to the product that is the result of improper or lack of maintenance

any product that has been altered or modified
any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
- any damage caused by non-observation of the instruction manual
- any product not displaying the CE approval mark on the rating plate
any product that has been attempted to be repaired by a nonauthorised warranty service centre or without prior authorisation by Techronic Industries
- any product connected to improper power supply (amps, voltage, frequency)

any damage caused by external influences (water, chemical, physical, shocks) or foreign substances

normal wear and tear spare parts
- inappropriate use, overloading of the tool
-use of non-approved accessories or parts
- Power tool accessories provided with the tool or purchased separately, including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide, etc.
- Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.

1. For servicing, the product must be sent or presented to a RYOBI authorised service station listed for each country in the following list of service station addresses. In some countries your local RYOBI dealer undertakes to send the product to the RYOBI service organisation. When sending a product to a RYOBI service station, the product should be safely packed without any dangerous contents such as petrol, marked with sender's address and accompanied by a short description of the fault.
2. A repair / replacement under this warranty is free of charge. It does not constitute an extension or a new start of the warranty period. Exchanged parts or products become our property. In some countries delivery charges or postage will have to be paid by the sender. Your statutory rights arising from the purchase of the product remain unaffected
3. This warranty is valid in the European Community, Switzerland, Iceland, Norway, Liechtenstein, Turkey and Russia. Outside these areas, please 6. contact your authorised RYOBI dealer to determine if another warranty applies.

AUTHORISED SERVICE CENTRE

To find an authorised service centre near you, visit http://uk.rybitools.eu/SERVICE APRES-VENTE AGREE header/service-and-support/service-agents Pour couver le service après-vente agree le plus proche, rendez-vous sur http:// fr.rybitools.eu/header/service-and-support/service-agents.

FR RYOBI CONDITIONS D'APPLICATION DE LA GARANTIE

EN DECLARATION OF CONFORMITY

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Herewith we declare that the product

Percussion Drill

Brand: RYOBI

Model number: R18PD3

Serial number range: 46229702000001 - 46229702999999

is in conformity with the following European Directives and harmonised standards 2006/42/EC,2014/30/EU,2011/65/EU.

EN 55014-1:2017, EN55014-2:2015, EN 62841-1:2015, EN 62841-2-1:2018

RoHS documentation is compiled according to EN IEC 63000:2018

Todd Chipner

Sr. Director, CPT Quality and Asia Regulatory & Safety

Authorised to compile the technical file:

Alexander Krug, Managing Director

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

FR DÉCLARATION DE CONFORMITÉ

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-Straße 10,71364 Winnenden, Germany

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-StraBe 10,71364 Winnenden, Germany

Max-Eyth-Straße 10,71364 Winnenden, Germany

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-StraBe 10,71364 Winnenden, Germany

NL CONFORMITEITSVERKLARING

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

RoHS-documentatio is samengesteld in overoonstemming met EN IEC 63000:2018

Todd Chipner

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-StraBe 10,71364 Winnenden, Germany

Pelo presente declares que os produits

Berbequim de Percussao

Marca: RYOBI

Numero do modelo: R18PD3

Intervalo do numero de series: 46229702000001 - 46229702999999

Max-Eyth-Straße 10, 71364 Winnenden, Germany

DA OVERENSSTEMMELSESERKLÄERING

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Vi erklaerer hermed, atprodukter

Slagboremaskine

Brand: RYOBI

Modelnumber:R18PD3

Serienummeromrade:46229702000001-46229702999999

Max-Eyth-Straße 10, 71364 Winnenden, Germany

SV KONFORMITETSDEKLARATION

Techtronic Industries GmbH

Max-Eyth-Straße 10,71364 Winnenden, Germany

Härmed deklarervi attprodukterna

Stiagbort

Marke: RYOBI

Modellnumber:R18PD3

Serienummerinterval:46229702000001-46229702999999

Max-Eyth-Straße 10, 71364 Winnenden, Germany

FI SÄÄNNÖSTEN NOUDATTAMINEN

Techronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-Straße 10, 71364 Winnenden, Germany

NO SAMSVARSERKLAERING

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Herved erkleerer vi atprodukter

Slagdrill

Merke: RYOBI

Modellnummer: R18PD3

Serienummerserie: 46229702000001 - 46229702999999

Max-Eyth-Straße 10, 71364 Winnenden, Germany

RU 3AABJIHEHNE O COOTBETCTBHN TPEBOBAH

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

HaCToIaM Mb3aBnAe,HTo DaHbI npOpyKT

DpeIyVaapHOrO DeiCTBn

Mapka: RYOBI

HOMeP MoJeN: R18PD3

Duaaoh3aBocnHmOpOB:46229702000001-46229702999999

COOTBeTCTByET Tpe6oAHnM CneDyUOuX DnpeKTHB EC n cornaOBaHHbIX cTahdapTOB

2006/42/EC, 2014/30/EU, 2011/65/EU.

EN 55014-1:2017, EN55014-2:2015, EN 62841-1:2015, EN 62841-2-1:2018

Dokymehmaa RoHS coomeemcmey em cmanapmy EN IEC 63000:2018

C

Todd Chipner

H DnpekTpo NO KOHTPOJIO KaueCTBa npOdyKuM CPT, HopmatBOB 6e3onacHOCTN

B AmaTckOM permoHe

Max-Eyth-Straße 10, 71364 Winnenden, Germany

PL DEKLARACJA ZGODNOSCI

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-Straße 10, 71364 Winnenden, Germany

RO DECLARATIE DE CONFORMITATE

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Prin prezenta,declaream ca produsele

Ciocan percutor

Marcà: RYOBI

Numar series: R18PD3

Gamā numār serié: 46229702000001 - 46229702999999

Alexander Krug, Director general

Techtronic Industries GmbH

Max-Eyth-StraBe 10, 71364 Winnenden, Germany

CS PROLÁSENI SHODE

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Timto prolasujeme, zeVyrobky

Priklepova vrtacka

Znacka:RYOBI

Cislo modelu: R18PD3

Rozsah sériovych cisel: 46229702000001 - 46229702999999

Ze tento vyrobek je v souladus evropskymi a harmonizovanymi standardy

2006/42/EC, 2014/30/EU, 2011/65/EU

EN 55014-1:2017, EN55014-2:2015, EN 62841-1:2015, EN 62841-2-1:2018

RoHS dokumentace sestavena dle EN IEC 63000:2018

Todd Chipner

Vrchni feditel, jakost elektrickho naradi (CPT) a pdefpisy a bezpecnost pro Asii

Max-Eyth-Straße 10, 71364 Winnenden, Germany

LV ATBILSTIBAS DEKLARACija

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Ar so pazijojam, ka produkti

Triecienurbjmasina

Zimols: RYOBI

Modela numurs: R18PD3

Serijas numura intervals: 46229702000001 - 46229702999999

Max-Eyth-Straße 10, 71364 Winnenden, Germany

HU MEGFELELOSEGI NYILATKOZAT

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-Straße 10, 71364 Winnenden, Germany

LT ATITIKTIES PAREISKIMAS

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-Straße 10, 71364 Winnenden, Germany

VASTAVUSDEKLARATSI0ON

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Kinnitame, et see toode

Lokkrell

Mark: RYOBI

Mudeli number: R18PD3

Seerianumbri vahemik: 46229702000001 - 46229702999999

Max-Eyth-Straße 10, 71364 Winnenden, Germany

PREHLASENIE O ZHODE

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-Straße 10, 71364 Winnenden, Germany

IZJAVA O USKLADENOSTI

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-Straße 10, 71364 Winnenden, Germany

DEKJIAPAUN HA 3A CbOTBETCTBNE

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

C HactoToTeDeknapnpame,Ye npOdykTHTe

UdapHo npobuBaHe

Mapka: RYOBI

HomepHaMoDena:R18PD3

Oxbat Ha cepHHHomepa:46229702000001-46229702999999

OTROBAPRA HA CNEDHHTe DnpeKTHNB HA EC nXapMOHN3npaHn CTAHdApTN

2006/42/EC, 2014/30/EU, 2011/65/EU

EN 55014-1:2017, EN55014-2:2015, EN 62841-1:2015, EN 62841-2-1:2018

Dokymentaunra3a RoHS e cbctabena B cbotbetcbe c EN IEC 63000:2018.

C

Todd Chipner

TJIaBEN DnpeKTOpKaueCTBO Ha CPT HOpMaTHBHO CbOTBeTCTBne 6e3OnaCHOCT 3a

Max-Eyth-Straße 10, 71364 Winnenden, Germany

IZJAVA O SKLADNOSTI

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-Straße 10, 71364 Winnenden, Germany

DEKJIAPAUIPIPOBIDIOBIDHICTb

Techronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Pn ybmy Mm 3aBnEmo, 0 npOdyKT

YdapHn npnlb

Mapka: RYOBI

Home page: R18PD3

Dianaon cepiHoro Homepy: 46229702000001 - 4622970299999

YBIIIOBIIHOCTI 3 HAcTyHIMM EBPOnEeChbKMM DInpeKTHBaAM Ta rApMOHi3OBAHHM

2006/42/EC, 2014/30/EU, 2011/65/EU,

EN 55014-1:2017, EN55014-2:2015, EN 62841-1:2015, EN 62841-2-1:2018

Dokymentaia RoHS cKaeHa BiNobiH Do EN IEC 63000:2018

C

Todd Chipner

TEN. Dnepektop 3 nIaH kOCTi CPT, i peryIIOBbHn oxoPON npaI taTexHkN 63neKn B AaII

Max-Eyth-Straße 10, 71364 Winnenden, Germany

UYGUNLUK BEYANI

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Alexander Krug, Genel Muddur

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

△HAΩΣH ΣYMMOPΦΩΞH

Techtronic Industries GmbH

Max-Eyth-Straße 10, 71364 Winnenden, Germany

Max-Eyth-Straße 10, 71364 Winnenden, Germany

EN RYOBI is a trademark of Ryobi Limited, and is used under license.

© 2019 Techtronic Cordless GP. All rights reserved.

© 2019 Techtronic Cordless GP. Alla rattigheter forbehálls.

© 2019 Techtronic Cordless GP. Bce npaea zauuuehbl.

© 2019 Techtronic Cordless GP. Vse pravice pridrzane.

71364 Winnenden, Germany