Sleepi Extension Junior - Baby bed STOKKE - Free user manual and instructions

USER MANUAL Sleepi Extension Junior STOKKE

USER GUIDE Designed to be closer

user guideBED EXTENSION KIT

user guideBED EXTENSION KIT

user guideBED EXTENSION KIT

user guide120 kg (264 lbs) STOKKE

Stokke Sleepi user guide USA – CANADA – AUSTRALIA: Open hole fittings (screw bag) Assembly instructions Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS FOR FUTURE USE. EN: To prevent your baby’s ngers to get trapped in gaps or open holes, please make use of the open hole ttings included in the package. Always after assembling or reassembling the cot, x the open hole ttings, part A, in all holes that remain open on the sides of the cot, and part B in the mattress base. The open hole ttings are easily installed. Just insert the ”screw” from one side of the hole and the ”nut” from the other side, and press them together using your ngers. To remove the open hole ttings, use two coins/screwdrivers. Screw from each side at the same time in opposite directions. FR: To prevent your baby’s ngers to get trapped in gaps or open holes, please make use of the open hole ttings included in the package. Always after assembling or reassembling the cot, x the open hole ttings, part A, in all holes that remain open on the sides of the cot, and part B in the mattress base. The open hole ttings are easily installed. Just insert the ”screw” from one side of the hole and the ”nut” from the other side, and press them together using your ngers. To remove the open hole ttings, use two coins/screwdrivers. Screw from each side at the same time in opposite directions.1:1

DRAPE ROD ACCESSORY KIT

DRAPE ROD ACCESSORY KIT

DRAPE ROD ACCESSORY KIT

user guideDRAPE ROD ACCESSORY KIT

user guideGB/IE IMPORTANT, RETAIN FOR FUTURE REFERENCE. READ CAREFULLY! Congratulations with your new STOKKE® SLEEPI™! With Stokke® Sleepi™ you have a bed that can be used from birth and it grows with your child. Stokke® Sleepi™ Mini

• When a child is able to sit, kneel or to pull itself up, the Mini shall not be used anymore for this child.

Make sure that the distance from the mattress to the top of the Mini is never less than 20 cm. You will have no problems if the original mattress from STOKKE is used.

• Do not let other children play unsupervised near the Mini.

Make sure the Mini is locked in a xed position when a child is unsupervised in it. Stokke® Sleepi™ Bed

The cot base height can be adjusted at all four basic heights. Make sure that the distance from the mattress to the top of the cot is never less than 30 cm in the highest position and 50 cm in the lowest position. This level is marked at the cot end ( ). You will have no problems if the original mattress from STOKKE is used.

The lowest position of the cot base is always the safest. As soon as the baby can sit up or pull itself up, the cot base must be lowered.

• Make sure to keep medication, string, elastic, small toys or small items such as money out of reach from any position in the cot.

To prevent injuries from falls when your child can climb in and out of the bed by itself, you shall no longer use the Sleepi™ Bed as a cot. You can consider removing one side of the cot and adjust the cot base to the lowest position. This way your child can climb safely in and out of the cot by itself. If you do this it is important to remove the wheels. Cleaning and maintenance MATTRESS: Mattress cover: Washable at 60°C. Stretch while wet. Do not use tumble drier. Foam: Can be heat treated in 60°C and washed/ushed in hot water. After a pee accident, the mattress should always be washed; pee is excellent growth media for fungi. WOOD: Wipe with a clean damp cloth, wipe o excess of water. We do not recom- mend any use of detergent. Colours may change if they are exposed to the sun. NORMAL USE: Always remove the duvet in the morning and let the bed and duvet ”cool down” and dry up. Recommended mattress size This cot has been manufactured for use with a mattress which measures 678 mm wide by 1205 mm long and 80 mm in thickness for Sleepi and 570 mm wide by 750 mm long and 80 mm in thickness for Mini and have the shape of the cot/mini-cot. The width and length are specied because it is important that the gaps between the mattress and the sides and ends of the cot will not exceed 30 mm. This is to minimize the risk of a child’s limb becoming caught in the gap. The thickness of the mattress has been specied to ensure that the depth of the cot is greater than 500 mm with the mattress base in the lower position to minimize the risk of a child climbing or falling out of the cot. Information about your new mattress

• INSTRUCTIONS FOR USE: Hold the zipper end with one hand. As the zipper puller is sewn on inside, use the other hand to open the zipper from mesh side.

• Compressed mattresses regain their original shape after 72-96 hours

Polyurethane-foam has a distinctive odour which may linger a few days after unpacking. The odour will disappear. Airing and vacuuming the mattress will help to eliminate the odour.

The foam reacts to he ultraviolet light from the sun and the oxygen from the air and will turn yellow with time.

• The mattress is compliant with EN 16890:2017 WARNING Do not use this product without reading the instructions rst. Read these instructions carefully and follow them in detail to ensure that the safety features of the Mini and cot are not compromised. Keep these instructions for later use. Save the Allen key for later use. Re-tighten all screws 2-3 weeks after assembly.

When assembling the Mini or cot do not tighten the screws until the whole unit is assembled. Doing this ensures you the easiest way to assemble.

• Make sure the Mini or cot is placed on a level and stable surface. After assembly, check and tighten all ttings and screws. Fittings and screws should be checked regularly and retightened as necessary. Loose screw connections or parts could lead to the baby trapping a body part, or clothing (e.g. strings, necklaces, ribbons for babies’ dummies, etc.) which would pose a risk of strangulation.

Never place the Mini or cot by an open re or sources of strong heat such as electric bar res, gas res, etc. due to the risk of re.

Do not use the Mini or cot if any part is broken, torn or missing, and use only spareparts approved by STOKKE®.

• Do not use any accessories or replacement parts not manufactured by STOKKE, this may aect your child’s safety.

Do not leave anything in the cot or place the cot close to another product, which could provide a foothold or present danger of suocation or strangulation, e.g. strings, blind/curtain cords etc.

• Do not use more than one mattress in the cot. Right of complaint and Extended Warranty Applicable worldwide in respect of the Stokke® Sleepi™, hereinafter referred to as the product.

The customer has a right of complaint pursuant to the consumer protection legislation applicable at any given time, which legislation may vary from country to country. Generally speaking, STOKKE AS does not grant any additional rights over and above those laid down by the legislation applicable at any given time, although reference is made to the ”Extended Warranty” described below. The rights of the customer under the consumer protection legislation applicable at any given time are additional to those under the ”Extended Warranty”, and are not aected thereby.

STOKKE® ”EXTENDED WARRANTY”

However, STOKKE AS, Parkgata 6, N-6003 Ålesund, Norway, grants an ”Extended Warranty” to customers who register their product in our Warranty Database. This may be done via our web page www.stokkewarranty.com. Upon registration, a warranty certicate will be issued and sent to the customer electronically (e-mail) or by ordinary mail. Registration in the Warranty Database entitles the owner to an ”Extended War- ranty” as follows:

• 7-year warranty against any manufacturing defect in the product. The ”Extended Warranty” also applies if the product has been received as a gift or purchased second-hand. Consequently, the ”Extended Warranty” may be invoked by whoever is the owner of the product any given time, within the warranty period, and subject to the warranty certicate being presented by the owner. The STOKKE® ”Extended Warranty” is conditional upon the following:

The product only having been used for the purpose for which the product is intended.

• The product having undergone ordinary maintenance, as described in the main- tenance/instruction manual.

Upon the ”Extended Warranty” being invoked, the warranty certicate shall be presented, together with the original date-stamped purchase receipt. This also applies to any secondary or subsequent owner.

The product appearing in its original state, hereunder that the only parts used have been supplied by STOKKE® and are intended for use on, or together with, the product. Any deviations here from require the prior written consent of STOKKE®.

• The serial number of the product not having been destroyed or removed. The STOKKE® ”Extended Warranty” does not cover:

Issues caused by normal developments in the parts making up the product (e.g. colouration changes, as well as wear and tear).

Issues caused by minor variations in materials (e.g. colour dierences between parts).

Issues caused by extreme inuence from external factors like sun/light, temperature, humidity, environmental pollution, etc.

Damage caused by accidents/mishaps – for example any other objects having bumped into the product or any person having overturned the product by colliding with it. The same applies if the product has been overloaded, for example in terms of the weight placed on it.

Damage inicted on the product by external inuence, for example when the product is being shipped as luggage.

Consequential damage, for example damage inicted on any persons and/or any other objects.

If the product has been tted with any accessories that have not been supplied by Stokke, the ”Extended Warranty” shall lapse.

The ”Extended Warranty” shall not apply to any accessories that have been purchased or supplied together with the product, or at a subsequent date. STOKKE® will under the ”Extended Warranty”:

Replace or – if STOKKE® thus prefers – repair the defective part, or the product in its entirety (if necessary), provided that the product is delivered to a reseller.

• Cover normal transport costs for any replacement part/product from STOKKE® to the reseller from whom the product was purchased. – No travel costs on the part of the purchaser are covered under the terms of the warranty.

Reserve the right to replace, at the time of the warranty being invoked, defect parts by parts that are of approximately the same design.

Reserve the right to supply a replacement product in cases where the relevant product is no longer being manufactured at the time of the warranty being invoked. Such product shall be of corresponding quality and value. How to invoke the ”Extended Warranty”: Generally speaking, all requests relating to the ”Extended Warranty” shall be made to the reseller from whom the product was purchased. Such request shall be made as soon as possible after any defect has been discovered, and shall be accompanied by the warranty certicate as well as the original purchase receipt. Documentation/evidence conrming the manufacturing defect shall be presented, normally by way of the product being brought along to the reseller, or otherwise being presented to the reseller or a STOKKE® sales representative for inspection. The defect will be remedied in accordance with the above provisions if the reseller or a STOKKE® sales representative determines that the damage is caused by a manu- facturing defect.

» Norway www.stokkewarranty. . com

Read these instructions carefully and follow them in detail to ensure that the safety features of the bassinet and crib are not compromised. Keep these instructions for later use. Save the Allen key for later use. Re-tighten all screws 2-3 weeks after assembly.

When assembling the bassinet or crib do not tighten the screws until the whole unit is assembled. Doing this ensures you the easiest way to assemble.

Make sure the bassinet or crib is placed on a level and stable surface. After assembly, check and tighten all ttings and screws. Loose screw connections or parts could lead to the baby trapping a body part, or clothing (e.g. strings, necklaces, ribbons for babies’ dummies, etc.) which would pose a risk of strangulation.

Make sure there are no loose parts in the bassinet or crib which a child could swallow, as this could lead to suocation or choking. Make sure there are no loose parts in the crib that could provide a foothold for

Never place the bassinet or crib by an open re or source of strong heat such as electric bar res, gas res, etc. due to the risk of re.

• Do not use the bassinet or crib if any parts are damaged or missing.

• Place the bassinet or crib in reasonable distance from curtains, blinds, heaters and power points.

To ensure a safe environment for the child, check regularly, before placing the child in the bassinet or crib, that every component is properly and securely in place. Information about your new mattress Compressed mattresses regain their original shape after 72-96 hours Polyurethane-foam has a distinctive odour which may linger a few days after unpacking. The odour will disappear. Airing and vacuuming the mattress will help to eliminate the odour. The foam reacts to he ultraviolet light from the sun and the oxygen from the air and will turn yellow with time. The mattress is compliant with EN 16890:2017. INSTRUCTIONS FOR USE: Hold the zipper end with one hand. As the zipper puller is sewn on inside, use the other hand to open the zipper from mesh side.

CLEANING AND MAINTENANCE

Foam: Can be heat treated in 100°C (212°F) and washed/ushed in boiling water. After a pee accident, the mattress should always be washed; pee is excellent growth media for fungi.

Wood: Wipe with a clean damp cloth, wipe o excess of water. We do not recommend any use of detergent. Colours may change if they are exposed to the sun.

• Normal use: Always remove the bedlinen in the morning and let the bed and bedlinen ”cool down” and dry up. *) Not valid for other manufacturers. See own care-instructions. Right of complaint and Extended Warranty Applicable worldwide in respect of the Stokke® Sleepi™, hereinafter referred to as the product.

The customer has a right of complaint pursuant to the consumer protection legislation applicable at any given time, which legislation may vary from country to country. Generally speaking, STOKKE AS does not grant any additional rights over and above those laid down by the legislation applicable at any given time, although reference is made to the ”Extended Warranty” described below. The rights of the customer under the consumer protection legislation applicable at any given time are additional to those under the ”Extended Warranty”, and are not aected thereby.

STOKKE® ”EXTENDED WARRANTY”

However, STOKKE AS, Parkgata 6, N-6003 Ålesund, Norway, grants an ”Extended Warranty” to customers who register their product in our Warranty Database. This may be done via our webpage www.stokkewarranty.com. Upon registration, a warranty certicate will be issued and sent to the customer electronically (e-mail) or by ordinary mail. Registration in the Warranty Database entitles the owner to an ”Extended Warranty” as follows:

• 7-year warranty against any manufacturing defect in the product. The ”Extended Warranty” also applies if the product has been received as a gift or purchased second-hand. Consequently, the ”Extended Warranty” may be invoked by whoever is the owner of the product any given time, within the warranty period, and subject to the warranty certicate being presented by the owner. The STOKKE® ”Extended Warranty” is conditional upon the following:

The product only having been used for the purpose for which the product is intended.

The product having undergone ordinary maintenance, as described in the maintenance/instruction manual.

Upon the ”Extended Warranty” being invoked, the warranty certicate shall be presented, together with the original date-stamped purchase receipt. This also applies to any secondary or subsequent owner.

The product appearing in its original state, hereunder that the only parts used have been supplied by STOKKE® and are intended for use on, or together with, the product. Any deviations herefrom require the prior written consent of STOKKE®.

• The serial number of the product not having been destroyed or removed. The STOKKE® ”Extended Warranty” does not cover:

Issues caused by normal developments in the parts making up the product (e.g. colouration changes, as well as wear and tear).

Issues caused by minor variations in materials (e.g. colour dierences between parts).

Issues caused by extreme inuence from external factors like sun/light, temperature, humidity, environmental pollution, etc.

Damage caused by accidents/mishaps – for example any other objects having bumped into the product or any person having overturned the product by colliding with it. The same applies if the product has been overloaded, for example in terms of the weight placed on it.

Damage inicted on the product by external inuence, for example when the product is being shipped as luggage.

Consequential damage, for example damage inicted on any persons and/or any other objects.

If the product has been tted with any accessories that have not been supplied by Stokke, the ”Extended Warranty” shall lapse.

The ”Extended Warranty” shall not apply to any accessories that have been purchased or supplied together with the product, or at a subsequent date. STOKKE® will under the ”Extended Warranty”:

Replace or – if STOKKE® thus prefers – repair the defective part, or the product in its entirety (if necessary), provided that the product is delivered to a reseller.

• Cover normal transport costs for any replacement part/product from STOKKE® to the reseller from whom the product was purchased. – No travel costs on the part of the purchaser are covered under the terms of the warranty.

Reserve the right to replace, at the time of the warranty being invoked, defect parts by parts that are of approximately the same design.

Reserve the right to supply a replacement product in cases where the relevant product is no longer being manufactured at the time of the warranty being invoked. Such product shall be of corresponding quality and value. How to invoke the ”Extended Warranty”: Generally speaking, all requests relating to the ”Extended Warranty” shall be made to the reseller from whom the product was purchased. Such request shall be made as soon as possible after any defect has been discovered, and shall be accompanied by the warranty certicate as well as the original purchase receipt. Documentation/evidence conrming the manufacturing defect shall be presented, normally by way of the product being brought along to the reseller, or otherwise being presented to the reseller or a STOKKE® sales representative for inspection. The defect will be remedied in accordance with the above provisions if the reseller or a STOKKE® sales representative determines that the damage is caused by a manufacturing defect.

Bed EN 716-1:2017+AC:2019Stokke® Sleepi™ Mini WARNING Failure to follow these warnings and instruc- tions could result in serious injury or death

FALL HAZARD—To help prevent falls, do not use this product when the infant begins to push up on hands and knees or has reached 33 lbs (15 kg), whichever comes rst.

• Child can become entrapped and die when improvised netting or covers are placed on top of product. Never add such items to conne child in product.

The crib, including side rails, must be fully erected prior to use.

Discontinue use of crib when child is able to climb out or reaches the height of 35 in. (890mm).

Never place product near a window where cords from blinds or drapes can strangle a child.

If a sheet is used with the pad, use only the one provided by the bassinet or cradle manufacturer or one specically designed to t the dimensions of the bassinet or cradle mattress.

When a child is able to sit, kneel or to pull itself up, the cradle/bassinet shall not be used anymore for this child.

Never use this product if there are any loose or missing fasteners, loose joints, broken parts or torn mesh/ fabric. Check before assembly and periodically during use. Contact Stokke LLC for replacement parts. Never substitute parts.

Make sure that the distance from the mattress to the top of the bassinet is never less than 7.9’’. You will have no problems if the original mattress from STOKKE is used.

Do not let other children play unsupervised near the bassinet.

Make sure the bassinet is locked in a xed position when a child is unsupervised in it.

To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by your physician.

Always provide the supervision necessary for the continued safety of your child. When used for playing, never leave child unattended.

Use ONLY mattress/pad provided by the STOKKE which must be at least 29.6 in. long by 23 in. wide, and not more than 1 in. thick, and have the shape of the crib.

The mattress used with this cradle should not be more than 1 in. thick and should measure no less than 29,6 in. long and 23 in. wide. When the mattress is pushed against the sides of the cradle, there should be no gap bigger than 1 in. between the mattress and the sides of the cradle.

Check proper t of mattress. Should not be more than 1 inches thick. The maximum gap between mattress and inside of crib border (or edge) should be no more than 1 in.

• Do not use more than one mattress in the cot.

Do not use any accessories or replacement parts not manufactured by STOKKE®, this may affect your child’s safety. WARNING Strings can cause strangulation! Do not place items with a string around a child’s neck, such as hood strings or pacifier cords. DO NOT suspend strings over a crib or attach strings to toys. Do not use this cradle if the enclosed or attached instructions cannot be strictly adhered to. Do not use this cradle if the child is able to climb out unaided. Do not place cords, straps or similar items that could become wound around the child’s neck in or near this cradle. The mattress used with this cradle should not be more than 1 in. thick and should measure no less than 29,6 in. long and 23 in. wide. When the mattress is pushed against the sides of the cradle, there should be no gap bigger than 1 in. between the mattress and the sides of the cradle. WARNING – SUFFOCATION HAZARD. Infants have suocated:

• In gaps between extra padding and side of the bassinet/cradle, and

• In gaps between a mattress too small or too thick and product sides

• Use only the pad provided by manufac- turer. NEVER add a pillow, comforter, or another mattress for padding.

user guideStokke® Sleepi™ Bed WARNING Failure to follow these warnings and instruc- tions could result in serious injury or death

• Child can become entrapped and die when improvised netting or covers are placed on top of product. Never add such items to conne child in product.

The crib, including side rails, must be fully erected prior to use.

Strings can cause strangulation! Never place items with a string around a child’s neck such as hood strings or pacier cords. Never suspend strings over product or attach strings to toys.

Discontinue use of crib when child is able to climb out or reaches the height of 35 in. (890mm).

Never place product near a window where cords from blinds or drapes can strangle a child.

When child is able to pull to standing position, set mattress/base to lowest adjustment position and remove bumper pads, large toys, and other objects that could serve as steps for climbing out.

Never use this product if there are any loose or missing fasteners, loose joints, broken parts or torn mesh/fabric. Check before assembly and periodically during use. Contact Stokke LLC for replacement parts. Never substitute parts.

Never use plastic shipping bags or other plastic lm as mattress covers not sold and intended for that purpose. They can cause suocation.

If renishing, use a non-toxic nish specied for children’s products.

• Never use a water mattress with this product.

The crib base height can be adjusted at all four basic heights. Make sure that the distance from the mattress to the top of the crib is never less than 11.8’’ in the highest position and 20’’ in the lowest position. You will have no problems if the original mattress from STOKKE is used.

The lowest position of the crib base is always the safest. As soon as the baby can sit up or pull itself up, the crib base must be lowered.

Make sure to keep medication, string, elastic, small toys or small items such as money out of reach from any position in the crib

When your child can climb in and out of the bed by itself, you can consider removing one side of the bed and adjust the crib base to the upper position.

Always provide the supervision necessary for the continued safety of your child. When used for playing, never leave child unattended.

To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their back to sleep, unless otherwise advised by your physician.

Use ONLY mattress/pad provided by the STOKKE which must be at least 47.2 in. long by 26.4 in. wide, and not more than 3.9 in. thick, and have the shape of the crib.

The mattress used with this crib should not be more than 3.9 in. thick and should measure no less than 48 in. long and 26.7 in. wide. When the mattress is pushed against the sides of the crib, there should be no gap bigger than 1 in. between the mattress and the sides of the crib.

Check proper t of mattress. Should not be more than 3.9 inches thick. The maximum gap between mattress and inside of crib border (or edge) should be no more than 1 in.

• Do not use more than one mattress in the cot.

Do not use any accessories or replacement parts not manufactured by STOKKE, this may affect your child’s safety. WARNING Strings can cause strangulation! Do not place items with a string around a child’s neck, such as hood strings or pacifier cords. DO NOT suspend strings over a crib or attach strings to toys. Do not use this crib if the enclosed or attached instructions cannot be strictly adhered to. Do not use this crib if the child is able to climb out unaid- ed or is taller than 90cm (35’’). Do not place cords, straps or similar items that could become wound around the child’s neck in or near this crib. Ensure that the sides are properly latched or locked in place when the crib is occupied. The mattress used with this crib should not be more than 3.9 in. thick and should measure no less than 48 in. long and 26.7 in. wide. When the mattress is pushed against the sides of the crib, there should be no gap bigger than 1 in. between the mattress and the sides of the crib. WARNING – SUFFOCATION HAZARD. Infants have suocated:

• In gaps between extra padding and side of the bassinet/cradle, and

• In gaps between a mattress too small or too thick and product sides

• Use only the pad provided by manufac- turer. NEVER add a pillow, comforter, or another mattress for padding.

• Le matelas est conforme à la norme EN 16890:2017. INSTRUCTIONS FOR USE: Hold the zipper end with one hand. As the zipper puller is sewn on inside, use the other hand to open the zipper from mesh side.

user guide Stokke Sleepi Mini EN 1130:2019Stokke Sleepi Bed EN 716-1:2017+AC:2019AUS IMPORTANT, RETAIN FOR FUTURE REFERENCE. READ CAREFULLY! Congratulations with your new STOKKE® SLEEPI™! With Stokke® Sleepi™ you have a bed that can be used from birth and it grows with your child. Stokke® Sleepi™ Mini

• When a child is able to sit, kneel or to pull itself up, the Mini shall not be used anymore for this child.

Make sure that the distance from the mattress to the top of the Mini is never less than 20 cm. You will have no problems if the original mattress from STOKKE is used.

• Do not let other children play unsupervised near the Mini.

Make sure the Mini is locked in a xed position when a child is unsupervised in it. Stokke® Sleepi™ Bed

The cot base height can be adjusted at two heights. Make sure that the distance from the mattress to the top of the cot is never less than 30 cm in the highest position and 50 cm in the lowest position. This level is marked at the cot end ( ). You will have no problems if the original mattress from STOKKE is used.

The lowest position of the cot base is always the safest. As soon as the baby can sit up or pull itself up, the cot base must be lowered.

• Make sure to keep medication, string, elastic, small toys or small items such as money out of reach from any position in the cot.

To prevent injuries from falls when your child can climb in and out of the bed by itself, you shall no longer use the Sleepi™ Bed as a cot. You can consider removing one side of the cot and adjust the cot base to the lowest position. This way your child can climb safely in and out of the cot by itself. If you do this it is important to remove the wheels.

• Ensure the cot is placed at a reasonable distance from curtains, blinds, heaters and power points. Cleaning and maintenance MATTRESS: Mattress cover: Washable at 60°C. Stretch while wet. Do not use tumble drier. Foam: Can be heat treated in 60°C and washed/ushed in hot water. After a pee accident, the mattress should always be washed; pee is excellent growth media for fungi. WOOD: Wipe with a clean damp cloth, wipe o excess of water. We do not recom- mend any use of detergent. Colours may change if they are exposed to the sun. NORMAL USE: Always remove the duvet in the morning and let the bed and duvet ”cool down” and dry up. Recommended mattress size This cot has been manufactured for use with a mattress which measures 678 mm wide by 1205 mm long and 80 mm in thickness for Sleepi bed and 570 mm wide by 750 mm long and 80 mm in thickness for Sleepi Mini and have the shape of the cot/mini-cot. The width and length are specied because it is important that the gaps between the mattress and the sides and ends of the cot will not exceed 40 mm when the mattress is pushed to one side or end, and 20 mm when the mattress is centred in the cot. The thickness of the mattress has been specied to ensure that the depth of the cot is greater than 500mm with the mattress base in the lower position to minimize the risk of a child climbing or falling out of the cot. Information about your new mattress

• INSTRUCTIONS FOR USE: Hold the zipper end with one hand. As the zipper puller is sewn on inside, use the other hand to open the zipper from mesh side.

• Compressed mattresses regain their original shape after 72-96 hours

Polyurethane-foam has a distinctive odour which may linger a few days after unpacking. The odour will disappear. Airing and vacuuming the mattress will help to eliminate the odour.

The foam reacts to he ultraviolet light from the sun and the oxygen from the air and will turn yellow with time.

• The mattress is compliant with EN 16890:2017 WARNING Do not use this product without reading the instructions rst. Read these instructions carefully and follow them in detail to ensure that the safety features of the Mini and cot are not compromised. Keep these instructions for later use. Save the Allen key for later use. Re-tighten all screws 2-3 weeks after assembly.

When assembling the Mini or cot do not tighten the screws until the whole unit is assembled. Doing this ensures you the easiest way to assemble.

• Make sure the Mini or cot is placed on a level and stable surface. After assembly, check and tighten all ttings and screws. Fittings and screws should be checked regularly and retightened as necessary. Loose screw connections or parts could lead to the baby trapping a body part, or clothing (e.g. strings, necklaces, ribbons for babies’ dummies, etc.) which would pose a risk of strangulation.

Never place the Mini or cot by an open re or sources of strong heat such as electric bar res, gas res, etc. due to the risk of re.

Do not use the Mini or cot if any part is broken, torn or missing, and use only spareparts approved by STOKKE®.

• Do not use any accessories or replacement parts not manufactured by STOKKE, this may aect your child’s safety.

Do not leave anything in the cot or place the cot close to another product, which could provide a foothold or present danger of suocation or strangulation, e.g. strings, blind/curtain cords etc.

• Do not use more than one mattress in the cot.

WARNING: TO PREVENT FALLS, THE MATTRESS BASE OF THIS COT SHOULD

BE ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN SIT UP. Right of complaint and Extended Warranty Applicable worldwide in respect of the Stokke® Sleepi™, hereinafter referred to as the product.

The customer has a right of complaint pursuant to the consumer protection legislation applicable at any given time, which legislation may vary from country to country. Generally speaking, STOKKE AS does not grant any additional rights over and above those laid down by the legislation applicable at any given time, although reference is made to the ”Extended Warranty” described below. The rights of the customer under the consumer protection legislation applicable at any given time are additional to those under the ”Extended Warranty”, and are not aected thereby.

STOKKE® ”EXTENDED WARRANTY”

However, STOKKE AS, Parkgata 6, N-6003 Ålesund, Norway, grants an ”Extended Warranty” to customers who register their product in our Warranty Database. This may be done via our web page www.stokkewarranty.com. Upon registration, a warranty certicate will be issued and sent to the customer electronically (e-mail) or by ordinary mail. Registration in the Warranty Database entitles the owner to an ”Extended War- ranty” as follows:

• 7-year warranty against any manufacturing defect in the product. The ”Extended Warranty” also applies if the product has been received as a gift or purchased second-hand. Consequently, the ”Extended Warranty” may be invoked by whoever is the owner of the product any given time, within the warranty period, and subject to the warranty certicate being presented by the owner. The STOKKE® ”Extended Warranty” is conditional upon the following:

The product only having been used for the purpose for which the product is intended.

• The product having undergone ordinary maintenance, as described in the main- tenance/instruction manual.

Upon the ”Extended Warranty” being invoked, the warranty certicate shall be presented, together with the original date-stamped purchase receipt. This also applies to any secondary or subsequent owner.

The product appearing in its original state, hereunder that the only parts used have been supplied by STOKKE® and are intended for use on, or together with, the product. Any deviations here from require the prior written consent of STOKKE®.

• The serial number of the product not having been destroyed or removed. The STOKKE® ”Extended Warranty” does not cover:

Issues caused by normal developments in the parts making up the product (e.g. colouration changes, as well as wear and tear).

Issues caused by minor variations in materials (e.g. colour dierences between parts).

Issues caused by extreme inuence from external factors like sun/light, temperature, humidity, environmental pollution, etc.

Damage caused by accidents/mishaps – for example any other objects having bumped into the product or any person having overturned the product by colliding with it. The same applies if the product has been overloaded, for example in terms of the weight placed on it.

Damage inicted on the product by external inuence, for example when the product is being shipped as luggage.

Consequential damage, for example damage inicted on any persons and/or any other objects.

If the product has been tted with any accessories that have not been supplied by Stokke, the ”Extended Warranty” shall lapse.

The ”Extended Warranty” shall not apply to any accessories that have been purchased or supplied together with the product, or at a subsequent date. STOKKE® will under the ”Extended Warranty”:

Replace or – if STOKKE® thus prefers – repair the defective part, or the product in its entirety (if necessary), provided that the product is delivered to a reseller.

• Cover normal transport costs for any replacement part/product from STOKKE® to the reseller from whom the product was purchased. – No travel costs on the part of the purchaser are covered under the terms of the warranty.

Reserve the right to replace, at the time of the warranty being invoked, defect parts by parts that are of approximately the same design.

Reserve the right to supply a replacement product in cases where the relevant product is no longer being manufactured at the time of the warranty being invoked. Such product shall be of corresponding quality and value. How to invoke the ”Extended Warranty”: Generally speaking, all requests relating to the ”Extended Warranty” shall be made to the reseller from whom the product was purchased. Such request shall be made as soon as possible after any defect has been discovered, and shall be accompanied by the warranty certicate as well as the original purchase receipt. Documentation/evidence conrming the manufacturing defect shall be presented, normally by way of the product being brought along to the reseller, or otherwise being presented to the reseller or a STOKKE® sales representative for inspection. The defect will be remedied in accordance with the above provisions if the reseller or a STOKKE® sales representative determines that the damage is caused by a manu- facturing defect.

user guideV20. November 2020 – 138700 Stokke Sleepi User guide. STOKKE