EM2 - Knife STEBA - Free user manual and instructions

Product type	Electric knife
Model	EM2
Brand	Steba
Interchangeable blades	2 sets: blades for cooked/boiled/roasted foods, blades for frozen/hard foods
Blade guard	Yes, included
Holding fork	Yes, included
Storage box	Yes, included
Operation button	Yes, on/off
Blade attachment	By snapping onto the motor unit
Power supply	Mains, 220-240 V ~ 50/60 Hz
Power	Approx. 150 W
Blade material	Stainless steel
Housing material	Durable plastic
Cable length	Approx. 1 m
Weight	Approx. 500 g
Dimensions (approx.)	30 x 5 x 5 cm
Intended use	Cutting meats, fish, vegetables, hard or frozen foods
Maintenance	Clean blades with warm soapy water; wipe the motor unit with a damp cloth
Safety	Unplug before changing blades; do not immerse the motor unit; keep out of reach of children
Spare parts	Replacement blades, fork, blade guard available
Repairability	Repairs only by authorized after-sales service
Warranty	According to current terms

Frequently Asked Questions - EM2 STEBA

How to change the blades of the Steba EM2 knife?

Unplug the appliance. Press the blade release on the housing to release the blades. Take the new blades with the blade guard and snap them onto the motor unit. Make sure the serrated edge is facing the operation button. Remove the blade guard before using the appliance.

Can I wash the motor unit under water?

No, never immerse the motor unit in water. Wipe it only with a damp cloth. The blades can be washed in warm soapy water and dried thoroughly.

What types of food can I cut with this knife?

The knife comes with two sets of blades: one for cooked, boiled, or roasted foods (tender meats, fish), and the other for frozen or hard foods (frozen fruits, hard vegetables). Use the blade suitable for the food texture.

How to clean and maintain the EM2 knife?

Unplug the appliance. Remove the blades by pressing the release. Wash the blades in warm soapy water with a non-abrasive sponge, dry them well and replace the blade guard. Wipe the motor housing with a damp cloth. Store everything in the storage box.

Can I sharpen the blades?

No, it is not recommended to sharpen the blades. If the blades are dull, replace them with original Steba replacement blades.

Is the EM2 knife suitable for cutting bones?

No, never cut bones with this knife. This would dull the blades and could damage the appliance. Use the provided fork to hold the food.

How to use the provided fork?

The fork is used to hold the food while cutting. Stick the fork into the food to stabilize it and guide the blades up and down with little pressure.

Where can I buy replacement blades for the Steba EM2?

Replacement blades are available from Steba after-sales service or authorized dealers. Only use original Steba accessories.

What to do if the appliance no longer works?

First check the plug and power cord. If the appliance still does not start, contact Steba after-sales service. Do not attempt to repair the appliance yourself.

Can the knife be used by children?

The appliance can be used by children aged 8 and over under supervision. Children must not play with the appliance. Cleaning must not be performed by children unless they are over 8 and supervised.

USER MANUAL EM2 STEBA

Three kitchen utensils: a flat tool, a long-handled tool with textured grip, and a flat tool with black handle (no text or symbols visible)

Elektromesser EM 2

Instructions for use 7

Mode d'emploi 11

Close-up of a metallic tool or bracket with a coiled spring-like edge (no text or symbols visible)

Close-up of a metallic blade with zigzag edge and circular hole (no text or symbols)

This appliance is for private and indoor use only and must not be used commercially. Please read the instruction manual carefully and keep it at a safe place. When the appliance is given to another person the instruction manual should be passed to that person, too. Only use the appliance as described in the instruction manual and pay attention to the safety information. No liability for damages or accidents will be accepted, which are caused by not paying attention to the instruction manual.

Safety information

• The appliance must be used and plugged in only according the requirements shown on the rating label.
• Use the appliance only if the cord shows no damages. Check this before every use!
• Do not touch the power plug with wet hands.
• Connect the power plug to a properly installed and easily accessible socket only.
• To unplug the power plug, always pull the plug – not the cable.
• Plug off the appliance after each use or in case of failure.
• Do not pull at the cord. Don't pull it over edges and don't bend it too much.
• Keep the cord away from hot parts.
  The appliance can be used by children aged 8 and above and persons with limited physical, sensory or mental capabilities or lack of experience/knowledge, provided that are supervised or have been provided with instruction in the safe use of the appliance and have understood the resulting dangers. Children must not use the packaging as a toy. Cleaning and user maintenance must not be carried out by children unless they are 8 years or older and are supervised.
• Children under the age of 8 must be kept away from the appliance and the connecting cable.

- Children should be supervised to ensure that they do not play with the appliance or packaging material (e.g. Plastic Bags).

- The appliance must not be operated using a timer or a separate remote system!

- After using the appliance or if the appliance malfunctions, always pull out the plug.

- Never pull at the cord set. Do not chafe it over edges or squeeze it.

- Keep the power supply cord away from hot parts.

- Never leave the appliance unattended when operating.

- Do not put anything on the apliance.

- Do not leave the apliance outdoors or in a damp area.

· Never immerse the appliance in water.

- Do not operate the appliance if it is damaged (for example if it felt down).

- The manufacturer is not liable for damage occurred by using the appliance in another way than described or if a mistake in operating has been made.

- The apliance becomes very hot. Do not move the apliance until it has cooled down!

- To prevent injury, repairs such as replacing a damaged cord, should only be carried out by customer service.

- Avoid any contact with the blades. - Strong risk of injury.

· Pull the plug before you take out the blades.

- Pull the plug after each use and enter the device into its box.

- Only use original Steba accessories. Never try to put other objects into the motor part.

- Do not sharpen the blades.

Cleaning

- Pull the plug; your appliance must be free of current.

- Remove the blades from the motor part carefully by pressing the blade fixation.

· Do not immerse the unit into water.

- Wash the blades carefully in warm soapy water and dry them well. Slip the blade guard over the blades.

- Wipe the motor part with a damp cloth and put the electric knife into the box.

Labeled diagram of a mechanical tool set with numbered parts for identification

1. Blades Release Button 2. On/Off Button
2. Motor Housing 4. Blade
3. Plastic Guard 6. Protective sleeve for blades- always keep on blades
4. Fork

Close-up of a metallic tool or blade with serrated edge (no text or symbols visible)

Blade for boiled, roasted or backed food

Close-up of a metallic blade with zigzag grooves (no text or symbols visible)

Blade for frozed and hard food

Use

• Pull the plug before inserting the blades.
  • Take the two blades with the blade guard and lock them into the motor part.
• The serrated edge of the blades is always in the direction of the power button.
• Remove the blade guard now and plug in the appliance.
• Always cut with the blades from top to bottom carefully; cut with little pressure.
• Be careful not to cut into bones; otherwise your blades will become blunt.
• Hold the food with the supplied fork.

Correct Disposal of this product

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Packaging disposal: Do not throw away the package materials. Please put it in the recycling bin.

Gift box: Paper, should be put to the old paper collection point. Plastic packaging material and foils should be collected in the special collection containers.

Service and Repair:

If the appliance must be repaired, please get in touch with your trader or with the manufacturer:

Close-up of a metallic tool or blade with serrated edge (no text or symbols visible)

Close-up of a metallic blade with zigzag edge and circular hole (no text or symbols)

1. Blades Release Button 2. On/Off Button
2. Motor Housing 4. Blade
3. Plastic Guard 6. Protective sleeve for blades- always keep on blades
4. Fork

Close-up of a metallic tool or blade with serrated edge (no text or symbols visible)

Close-up of a metallic blade with zigzag edge and circular hole (no text or symbols)

Diagram of a mechanical device with numbered parts labeled 1 through 7, including a rectangular box and multiple tool tips.

1. Knivfiskering 2. On-/Offknap
2. Kabinet 4. Knive
3. Apparatboks 6. Knivbeskyttelse
4. Gaffel

Close-up of a white plastic clip with a coiled spring (no text or symbols visible)

Close-up of a metallic blade with zigzag grooves (no text or symbols visible)

Diagram of a screwdriver with numbered parts labeled 1 through 7, showing internal components and part alignment.

Close-up of a white cylindrical object with a coiled, spiral-like structure (no visible text or symbols)

Simple line drawing of a zigzag shape with a small circle at the bottom (no text or symbols)

Simple line drawing of a trash bin crossed with two diagonal lines and a horizontal bar below (no text or symbols)

Утилизация изделия