SensoCare ST780 - Hair straightener BRAUN - Free user manual and instructions

USER MANUAL SensoCare ST780 BRAUN

and confirm. Next, select one of the operation modes: SensoCare or Manual Mode, then confirm. A SensoCare In SensoCare mode, intelligent sensor technology enables continuous temperature adaptation according to the specific needs of your hair type. The styling temperature is not shown on the display, but continuously optimized based on your hair profile. This feature prevents hair damage caused by high styling temperatures. Set your profile / first use To set your profile, go through the hair length, thickness and coloration screens and select according to your hair type. Confirm each setting with the center button and save your settings by selecting a profile name (e.g. Profile 1). Confirm and select «Continue» if you want to use your profile right away. The flashing thermometer symbol shows that the appliance is heating up. Once the thermometer symbol stops flashing, the optimum styling temperature is reached and you can start styling. Next use Once a profile has been saved (e.g. Profile 1), the screen will show it right after switching on the next time. Just confirm and the appliance starts heating up. Edit profiles You can add new profiles or delete existing profiles. Up to 3 profiles can be saved. You can modify your profile (e.g. if your hair length or colour have changed). Reset All If you want to reset all settings (language and all profiles) choose «Reset All» on the «Delete Profile» screen. B Manual Mode Manual Mode allows you to select the styling temperature. This temperature will remain the same throughout the styling process since the sensor-based automatic temperature adaptation is deactivated in manual mode. Move the cursor to «Manual Mode» and confirm. The default temperature setting of 160 °C is displayed. Using the q p arrows, you may change the temperature setting in a range from 120 to 200 °C. While the appliance heats up, the temper- ature screen flashes. When the flashing stops, the selected temperature is reached and you can start styling. Recommended temperature settings Hair structure Coloured hair fine normal strong 120 °C - 150 °C 140 °C - 180 °C 170 °C - 200 °C up to 180 °C 97234773_ST780_S6-108.indd 1197234773_ST780_S6-108.indd 11 27.10.14 14:3427.10.14 14:34 CSS APPROVED Effective Date 4Nov2014 GMT - Printed 06Apr2017 Page 10 of 10712 C Using the appliance Preparation

• Make sure your hair has been dried completely and evenly before using the appliance.

• Comb your hair with a wide toothed comb to remove tangles.

• Section your hair off. Starting close to the roots, take a thin strand (2-3 cm maximum or 2 fingers wide) and clamp it firmly between the styling plates. How to straighten your hair

• Gently run the appliance through the entire length of the hair, slowly and steadily, from roots to the ends without stopping for longer than 2 seconds. This will ensure best straightening results without damaging your hair. The styling plates ensure easy and smooth gliding.

• For improved control when gliding along a strand, you may stabilise the appliance by holding it with the other hand on the cool touch points (1).

• You can create flicks at the hair ends by slowly turning the appliance either outwards or inwards before releasing a strand. How to form loose curls and waves – Clamp a thin strand at the roots, – rotate the appliance half a turn so that the strand glides through the styling plates and then over the active forming area, – then slowly move the appliance horizontally towards hair tips. When pulling the appliance beyond the hair tips, the strand will turn into curl. Feedback The SensoCare mode provides feedback on the straightening performance after each stroke. Speed (of stroke) Has the stroke been performed slowly enough? Right

Good, go on like this. Fast

Move appliance more slowly Very Fast

Move appliance slowly. Moisture (level of hair) Is your hair evenly dry? Dry

Good, go on like this. Damp

You will get better results on evenly dry hair. Wet