YETI 6000X - Portable power station GOAL ZERO - Free user manual and instructions

USER MANUAL YETI 6000X GOAL ZERO

POWER. ANYTHING. ANYWHERE Before using or storing, plug your Goal Zero Yeti into the wall until it is fully charged. Keep your Goal Zero Yeti plugged in when not in use . - to ensure it is always ready. This will NOT cause harm to your battery. & À © © *# For more tips and tricks on keeping your battery healthy, see the BATTERIES 101 section.

Read allinstructions and cautions carefully before use to avoid personal injury or damage to the unit and any connected products Observe all Input/Output connectors ratings: To avoid fire or electrical shock hazard, observe all ratings on unit, and products you intend to use; check manuals for more information. Use in a ventilated area: Ensure proper ventilation while in use and do not obstruct fan openings on unit. Inadequate ventilation may cause damage to the unit. Do not stack anything on top of the unit in storage or in use Power supplies will get hot when in use: Keep your Yeti Power supply in a dry, well ventilated area when in use. Do not keep the power supply under the lid when in use DO NOT operate in wet conditions: In order to avoid short circuits or electric shock do not allow unit to get wet. Let unit dry completely before using Keep the unit clean and dry: Inspect the unit for dirt, dust, or moisture on a regular basis Shock or Fire Hazard: This Yeti generates the same potentially lethal AC power as a normal household wall outlet. Please use it carefully just like using a normal AC outlet on the wall DO NOT insert foreign objects into outputs or ventilation holes. DO NOT tamper with or attempt to replace your battery. For information about a replacement battery contact the Goal Zero solutions center. Any manipulation to the unit or its components will void all warranties. Table of Contents Getting Started

i. Get to Know Your Gear

Charging Your Goal Zero Yeti

i. Charging from Solar

ï. Charging from the Wall Using Your Goal Zero Yeti i How to use ï. Best-Use Strategy ïï. Cold Weather Usage

Storage and Downtime Maintenance Technical Specifications Frequently Asked Questions Troubleshooting Education i Batteries 101 ï. Solar 101 Warranty Français Deutsch Español Italiano BAR

Buttons Under Lid Get To Know Your Gear uttons Under Lit Pressing the WiFi button will activate the Yetis WiFi for connection to a device. For information on connecting your device to the Yeti, see the included Yeti App Start Up Guide. Also, holding WiFi button switches between pairing and connecting modes. Pressing and holding will perform a soft reset (does not perform a factory reset and does not reset the watt hours), Must hold units button to reset watt hour counter. 8mm Input for Charging from Goal Interactive Buttons AC Outputs Zero Solar Panels, or AC and LCD Screen WiFi button Smm input 12V output Reset button _ B=<s 12V Outputs USB-C 5-12V, 3A(18W) Anderson Power Pole Input USB SV. up to 24A (12W) for Charging from Goal Zero Solar Panels, or AC USB-C Input/Output Power Delivery 5-20V, up to 3A (GW)

60OW of Solar AC Plug 12V Charger Input ose 11 Hours 55-110 Hours 10 Hours 1ODM eux Poner Sup (Eosepaateh) (Bssdoff max input) è EH 9

[res à Là CL] ü sucre &WLights 50"TV{4K, 6OW) Fridge 750+ Hours 100 Hours 100 Hours CHARGE IT [ Charging Your Goal Zero Yeti | ing Your Goal Zero Ye CHARGE ME NOW: Before using or storing, plug your Goal Zero Vetiinto the wall until it is fully charged. Keep your Goal Zero Yeti plugged in when not in use to ensure itis always ready. This will NOT cause harm to your battery. For more tips and tricks on keeping your battery healthy, see the BATTERIES 101 section. When charging your Goal Zero Yeti, you will notice a battery segment blinking in the display. This indicates the current charge status. Once your Goal Zero Yeti is fully charged, all battery segments will be lit and remain solid. As long as there is more power going into the Goal Zero Yeti than is being pulled from the output ports, the display will also indicate the time until fully charged. This is an estimated time based on the power input and output numbers at that moment; it wi gradually adjust to a shorter or longer time as the average charge or discharge rates fluctuate. Charging from the Wall Using the included 60OW AC Wall Charger, plug your Goal Zero Yeti into any wall outlet. You will know the Goal Zero Yeti is charging when the blue LED light next to the INPUT. port turns on, and battery segments in the BATTERY DISPLAY are linking. The Goal Zero Yeti is fully charged when all battery segments stop blinking and remain solid. The Goal Zero Yeti should recharge from the wall in about 11 hours.

1. The AC wall adapter comes in two pieces. Connect the two pieces by plugging the

2. The 60OW AC Wall Charger can be plugged into the the front of the Yeti

3. You can only use one wall charger at a time. 1f you want to charge your Yeti faster, call

our solutions center or lock at our fast charge options on goalzero.com NOTE: Te charge from your 12V output in your vehicle, use our 12V Car Charging Cable SKU 98079

Charging from Solar IMPORTANT NOTE: When solar recharging your Goal Zero Yeti Lithium, take note of the voltages of the solar panels and do not exceed SOV.In idual solar panels, or solar panels chained in series in excess of 50V cannot be used with the Goal Zero Yeti Lithium and can cause serious damage to the unit. For help on chaining solar panels, call our Customer Solutions Center at 888-794-6250. There are three different inputs you can use when charging your Goal Zero Veti from solar, two of which are located in the “INPUT” area on the left side of the Goal Zero Yeti faceplate and a third one located inside the storage compartment under the top lid. One of the front parts and the part inside the storage compartment are round 8mm ports designed to be used with Goal Zero Solar Panels or wall charger. Each 8mm input port can handle up to 120W. The Anderson Power Pole port is designed to be used with larger er higher power solar panels and can handle 600W of power, which is the total capacity for power across all input ports

2. Place your solar panel where it will get as much direct sunlight as possible

2. Insert the blue-ringed solar panel plug into one of the INPUT ports, either on the front

of the Goal Zero Yeti or in the storage compartment under the top id. You will know the Goal Zero Yeti is charging when the blue LED light next to the INPUT port lights up, and the battery segments in the BATTERY DISPLAY are blinking. The Goal Zero Yetiis fully charged when all battery segments stop linking and remain solid.

3. You can also connect the Goal Zero Yeti to soler panels using the Anderson Power-

Pole port and the appropriate adapter if necessary), next to the Bmm charging port.

4. You can chain multiple Goal Zero Solar Panels together to reduce solarrecharge times.

Your Goal Zero Yetiis capable of taking in 120W ofinput through the 8mm ports and no more than 600W of solar through the APP port. NOTE: you are inputting from solar panels into multiple ports you can only combine inputs ifthe panels being used are the same voltage. Panels that output different valtages willnot be able to combine through different ports. If you are using panels with different voltages into no or more of the input ports, the Yetiwil select the single highest solar input available. Also, solar and AC inputs wil not be able to be combined. Ifyou are inputting from botha solar panel and a wall outlet the Yeti wil select the higher ofthe two inputs. Using your Goal Zero Yeti How to use your Goal Zero Yeti:

1. Press the power button located above each port you will be using. “When not

using certain ports, make sure to turn them off to conserve power.

2. Youfl know the port is turned on when the white LED light on the button is

3. Plug in your gear for power anywhere life takes you.

4. 1f possible, keep your Goal Zero Yeti plugged into a power source when not in use

5. You can charge your Goal Zero Yeti, and run your gear at the same time

Best-Use Strategy: When charging gear with your Goal Zero Yeti, take note ofthe BATTERY DISPLAY. you plugin devices that have ahigh power requirement [a large refrigerator) the charge level of your Goal Zero Yeti can drop very quickly and you may not get exactly G00OWR of capacity. Also, especially when using the AC power output, the Goal Zero Yetiwil be converting the energy from the DC power of the battery ta the AC power needed by your device. Although your Goal Zero Yetihas ahighiy efficient inverter, there is still some energy lost in the conversion and you will not get the full rated capacity ofthe battery. I youire experiencing shorter runtimes, you mey want to check the devices power requirements, see TROUBLESHOOTING for help.

Cold Weather Usage: Cold temperatures (below freezing] can impact the Goal Zero Yetis battery capacity. If vou be out living off-grid in sub-zero conditions, we recommend keeping your Goal Zero Yeti in an insulated cooler, connected to a power source (solar panels}, and charging your gear. The natural heat generated by the Goal Zero Yeti contained in an insulated cooler will keep battery capacity at its highest. The Yeti will not allow charging below freezing for safety reasons. The unit will warn show a werning on the LCD as you approach this temperature INPUT BB vs LCD Display The built-in LCD display indicates four PR — IAB % Re

1. INPUT shows the amount of power (watts) going into the Goal Zero Vetiwhile

important things charging. If charging from solar, you see the watts change as you reposition the panels intolout of the sunight

2. OUTPUT shows the amount of power (watts) your devices are using while plugged

into the Goal Zero Yeti

3. TIME TO EMPTY/FULL shows the amount of time before your Goal Zero Yetiis

completely charged or empty, depending on if the net amount of power going into the Goal Zero Yetiis positive or negative.

4. BATTERY LEVEL shows 5 segments, approximating 20% - 40% - 60% - 80%

-100% capacity. As you use your Goal Zero Yeti, segments will disappear from the display, indicating the remaining charge. When charging your Goal Zero Yeti you will notice a battery segment blinking. This indicates the current charge status. Once your Goal Zero Yetiis fully charged, all battery segments will be lit and remain solid. As long 28 there is more power going into the Goal Zero Yeti then is being pulled from the output ports, the display will also indicate the ttime until fully charged. This is an estimated time based on the power input and output numbers at that time; will adjust to a shorter or longer time if the charge or discherge rates fluctuate. Note that when you first plug in a power source, whether its à solar panel or a wall charger, the Yeti may take a minute to detect and adjust its charge circuitry before it sterts drawing power from the source.

5. The WiFi symbol indicates the Yetis WiFiis turned on. If flashing, the Yeti is ready to

connect to a device. Front Buttons: Pressing the LIGHT button wil turn the display backlight on and off. Pressing the UNIT button wil scrll through different output and power consumption settings. Hold units + info to perform factory reset. this deletes wifi information and configurations. Hold units to reset watt hour counter. Pressing the INFO button will alternate the screen between showing the detailed battery state of charge percentage and the Time to Empty/Full Storage and Downtime Maintenance Having your Goal Zero Yeti connected to a power source, like a solar panel or well plug, between adventures or while in storage keeps its battery healthy and topped off. This prolongs battery life and will ensure your Goal Zero Yeti is charged and ready to go all day, every day. If you can't keep your Goal Zero Yeti plugged into a power source during storage, fully-charge your Goal Zero Yeti every 3 months and store it in a cool, dry place. If the Yeti has not been used for several months, it may require several charge cycles torestore accurate results on the battery percent and time remaining values on the screen. Failure to m: ain your Goal Zero Yeti by following these steps can result in battery damage whichwill void the product warranty.

Ath 24-48 1214hrs 1142hre Lion NMC 0L0WR (10 8V, 557An 1668 @ 26 ‘500 Gycles to 80% capacity (Discharge rate: 1C, Full chargeleischarge, Temp. 250) Charge every 3-6 months MPPT charge controller SV up to 2.4A LAW max, reguiated 5 124 up to 3 OA (L8W man) reguiated 12 up to 10A(120W man regulated 12 up to 134 (160W man regulated 121 up to SOA (360W man] regulated 120VAC 80Hz, 16.5A 12000 800W surge) OV up ta 3.08 (SOW max, reguiated 220VAC 50Hz, 8 SA (2000W, 2500W surge) 14-50V,upto 10A[120W mad 14-50V,upto 50A160OW ma Covered port under the li. T be used with Goal Zero expansion modules ar. RF Certification Protocole Frequency Range Bluetooth Protocole General: Might (Yeti) light art on) Dimensions [et on} Dimensions Yet Roll Car Operating Usage Temp. Certs Warranty CICENCITELECIKCCISRRC/NCC

Frequently Asked Questions My yetiis not responding or is exhibiting odd behavior what should | do? Tryresetting the unit by holding the Units and Info button for 3 seconds to reset your Yeti. Check your Yeti to see if the issue is resolved after the reset. My new Yeti does not nitially charge to 100%, it only charges to 25% what's going on? Cycle the battery a few times and the issue should resolve itself as the yeti dials in its charge parameters. Are there faster ways to recharge my Yeti? Yes, check out our fulllist of charging options at Goalzero.com. Here we have options for fast charging as well as vehicle integration. There is a new version of Firmware available and | want to update my Yeti how do | do this? Download the Goal Zero app from your favorite app store and follow the instructions there for an update to your Veti During the update process, my Yetiis stuck in a loop and keeps trying to update over and over unsuccessfully. How do | fix this? Tryresetting the Yeti following the instructions from Q1 and restart the update process. This should fix the issue. What does the snowflake icon and the thermometer icon mean? If your yeti displays the thermometer icon and a warning of HOT or COLD, this means vou are either approaching or have exceeded the temperature thresholds of the Yeti. A warning of “cold” means you will need to warm the eti in order to resume full functionality while ‘hot’ means you need to cool the unit.

have my Yeti connected to a charger but it is at 98% and not charging, what is going on? In order to get the most life out of your battery we make sure to not stress the battery pack at the full state of charge. The battery will charge to 100% and then stop, seif- discharge over time to 98% before the charge will engage again. f you are wanting to make sure your Yeti is completely topped off for upcoming use, unplugging and then re-plugging in your input cable should reengage the input and start the charge again My old Yeti accessory or charger is not working with my new Yeti X, should it be working? Some of the smaller power supplies and legacy chargers will not work with the new Yeti X. For a full list of compatible charger and accessories for your product please vist wmw.goalzero.com/accessories Can luse my 3rd party panels with my Yeti Yes, you can, so long as you stay under SOV. I using multiple 3rd party panels, be careful! Chaining 3rd party panels together can be dangerous if done in the wrong way. For more information contact our customer service team via telephone at (888) 794- 6250, or via email at support@goalzero.com Can chain multiple Goal Zero panels into a Yeti X? Yes, our panels are designed to be safely chained together out of the box and eliminate the risks associated with 3rd party panels My yet is not responding or is exhibiting odd behavior what should | do? Your Goal Zero Yeti uses custom designed Lithium lon. Here are some basic facts about Lithium lon batteries:

2. Lithium lon batteries can store andrelease a lot of energy in a short period of time.

‘The batteries in your Goal Zero Yeti are in a protective enclosure with a sophisticated battery management and protection system controlling its terminals to the outside world. 2... Itis critical that your battery does not get wet as moisture and water can getinto the battery cells behind the protection circuitry and bypass that protection.

How do 1 know if my Goal Zero Yeti is charged? To check the charge level of your Goal Zero Yeti, refer to the Battery Display. When lit up, you'll see a battery outline with 5 segments, indicating the current charge level. It is OK to use your Goal Zero Yeti even when its not fully charged How do | know if my device will work with the Goal Zero Yeti ? First, you‘ need to determine the amount of power your device requires. This may require some research on your end, a good internet search or examining the user guide for your device should suffice. Second, you will need to check the capacity for the individual output ports. For example, the Goal Zero Yetis AC port is powered by an inverter that allows for 2000W of power. This means if your device is pullng more than 2000W for an extended period of time, the Goal Zero Yetis inverter will shut off. Another number to watch for is the surge rating of vour device as compared to that of the port. The Goal Zero Yetiinverter has an advanced surge management system that will maximize its compatibility with various devices, but there will still be items that will surge at a higher rate, and for a longer time, than the Goal Zero Yeti can manage, in which case the port wil turn itself off. Finally, once you know your device is compatible, youll want to determine how long youll be able to power your gear from the Goal Zero Yeti. Here's a quick and dirty lesson in power. Al GOAL ZERO Power Banks and Portable Power Stations have a number in their name, ex. Sherpa100AC, Goal Zero Yeti 6000X. These numbers refer to the Watt Hours (Whl, or the amount of energy that can be stored in each recharger, and'how you'll know if your gear is compatible with each recharger. For example, a 200Wh power station should run a 100W light for 2 hours (200/100=2). your gear falls within the GOOOWh capacity of the Goal Zero Yeti, youll want to check the restrictions on each of the output ports.

Another factor in the math is how much power is being converted going from the Goal Zero Yeti battery to the device you are poweringlcherging. In some situations, like when running a 12V device, such as the LAL 350, directly off the 12V port, there will minimal conversion and thus very little additional losses. In using the USB ports to charge a phone, you add a layer of conversion (12V battery in the Goal Zero Yetiis being converted to a SV USB output}, which introduces around 10% of losses. When using the inverter, there are two layers of conversion (L2V to high voltage, DC to AC]. The least efficient way of using the battery inthe Goal Zero Yetiis to use an AC-DC adapter off the AC ports, as is the case if you use a phone wall charger to charge your phone, as it adds yet another layer of conversion in the well adapter. So when youre deciding on what to power from your new GOAL ZERO recharger, do some research into your device's watt consumption. For more quick tips and learning tools, check out www.GoalZero.com/learnhtml

Troubleshooting I your devices are not recharging from your Goal Zero Yeti follow these steps:

2. Ensure the Output Port has been turned on. The white LED light on the power button

2. any ofthe lights have tumed red, this indicates a trip. Push the button again to reset

it The light will turn white when it is successfully reset.

2. Check the Battery Display. IFit is at 20% or below, charge your Goal Zero Yeti

Check the LCD Display for warning icons: OVERLOAD: Power draw exceeds ports maximum allowance. indicated by redlight in the ports button Allow unit to cool Contact customer support. 1-888-704-6250 nl Temperature warning. û Battery requires attention.

4. Verify your device is suitable for use with the Goal Zero Yeti

2. Allofthe Goal Zero Yeti output ports have their on max power capacity. Check the

Goal Zero Yetis Tech Specs to ensure your device is compatible.

5. I you are still experiencing trouble with your Goal Zero Yeti, please call our Customer

Solutions Center at 1-888-794-6250 or by email at support@goalzero.com I you are having trouble with WiFi connection:

2. Press and hold the WiFi button for approximately 3 seconds to force the Yeti into

connection mode. The WiFi symbol on the screen will begin to flash

2. Reconnect your device to your Yeti following the instructions in the Goal Zero Yeti App

NOTE: If none of these solutions resolve your issue try resetting the unit by holding the Units and Info button for 3 seconds to reset your Yeti. Check our Yeti to see if the issue is resolved after the reset.

BATTERIES 101: GOAL ZERO utilizes the latest and greatest in battery technology to accompany you on al ifes adventures. From the versatile and lightweight Lithuim lon, to the robust and powerful Lead Acid, weve compiled some helpful tips to keep your GOAL ZERO batteries working their best.

i. Batteries need exercise.

The best thing for any battery is to use it. Dont leave the battery sitting without being charged for extended periods of time. you ill be storing the Goal Zero Yeti without a charger, make sure its fully charged before you put it away. ï. The ‘Battery Memory myth. Thanks to old Nickel-Cadmium (NiCd) batteries, there's a mythrunning around that you should completely drain your batteries before plugging them in for a recharge, called'deep cycling' Although true with NiCd batteries, the typical batteries you find'in most of your gear today, including the advanced lithium and lsad-acid batteries used in your GOAL ZERO rechargers, require no such draining. In fact, you should avoid deep cycling your batteries it does more harm than good in most cases.

ii. The “Stadium Effect

The stadium effect oceurs when recharging your batteries. You‘ notice your battery quickly Filing up in the beginning, then slowing down noticeably when trying to charge up the last several percentages. Think of how quickly a stadium flls up when the doors first open - there arehundreds of open seats so its easy to find the one you want. Eventually there are only 2 few open seats here and there and people have to maneuver around to find the spot they want and filing those seats takes longer. The same theory applies to recharging batteries. It easy for energy ta flow in and take up empty space in the beginning, and as time goes on and there is less space available, t takes longer for the energy to fill in the holes.

Yeah, it might be a long read, but the manual is the best place to find the dos and don'ts for the battery in your specific device. Reading your manual wi ensure your taking steps to keep your batteries happy and healthy.

SOLAR 101: GOAL ZERO makes it easy to recharge your gear from the sun we didn't invent solar power, we perfected it, Some things to keep in mind when recharging your gear with solar power:

i. Solar panels don't store power from the sun, they collect it.

We teach you to COLLECT - STORE -USE, which is the best way to utilize solar power to recharge your gear. COLLECT the sun's energy with a solar panel. STORE the power ina recharger. USE the recharger to power your gear, day or night. I youre really a dishard, you can plug vour gear directly into the junction box located on the back of our NOMAD Solar Panels to recharge from the sun.

ii. Not all solar charge times are created equal.

Most solar panel manufacturers calculate their recharge times with the following equation: Device Watt Hours/Solar Panel Watts = Solar Recharge Times. So theoretically, a 13 watt solar panel would recharge a 50 watt-hour recharger in 3.84 hours (50/13 = 3.84)- and this is the number you could find in marketing material for a solar panel. However, in order to standardize results across all manufacturers, these tests are completedin laboratory settings. The truthis, on a good, sunny day, voull receive about 50-75% of your solar panels rated wattage, and this is how the engineers at GOAL ZERO calculate the solar recharge times you see on our packaging. äi. Solar works, even in overcast conditions. Solar panels utilize IR, UV, and visible rays from the sun that can penetrate through clouds: Although the efficiency of the solar panel will decrease in cloudy conditions, vou still be collecting valuable power from the sun.

iv. Keep away from shade and windows.

Although you should seek out the shade on sunny days, your solar panels wil collec more power when fully exposed to the sunlight. Windows also have a habit of decreasing efficiency. So keep those panels outside and in the bright sunlight.

v. Proper alignment works wonders.

Keeping your solar panel angled towerd the sun can dramatically increase solar efficiency. Setit up and let Mother Nature do the rest

Warranty & Contact LIMITED WARRANTY This LIMITED WARRANTY from GOAL ZERO LLC (GOAL ZERO") warrants to the original consumer purchaser that this GOAL ZERO product wil be free fram defects in workmanship and material under normal consumer use during the applicable warranty period identified in Paragraph 2, below, subject ta the exclusions set forthin Paragraph 5, below. The foregoing provisions state GOAL ZEROS entire liabiity, and your exclusive remedy, for any breach of warranty, express or implied. GOAL ZERO will not assume, nor authorize any person to assume for it, any other liability in connection with the sales of GOAL. ZERO products. WARRANTY PERIOD ‘The warranty period for GOAL ZERO lead acid batteries(nhether purchased on a stand-alone basis or as part of another product} is One Hundred and Eighty (180) days. ‘The warranty period for GOAL ZERO lithium battery based Yeti products and Boulder solar panels is two 2lvears. The warranty period for all other GOAL ZERO products and companents is ane (1] year from the date of original purchase by the ariginal consumer A sales receipt from the original consumer purchase, or ather reasonable documentary proof, is required in arder to establish the start of the warranty period. # you completed the anline GOAL ZERO Product Registration Form within thirty (30) days after purchasing your product, that registration can also establish the start date of the warranty period {but warranty coverage is not conditioned upon such registration) REMEDY GOAL ZERO will, at ts option, (1] repair the product at no charge, using new or refurbished replacement parts, or (2) exchange the product with a product that is new or which has been manufactured from new ar serviceable used parts and is at least functionally equivalent to the original product. À replacement product/part assumes the remaining warranty of the original product or ninety (0) days fram the date of replacement or repair, mhichever provides longer coverage for yau. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes GOAL ZEROS property

LIMITED TO ORIGINAL CONSUMER BUYER

‘This warranty is not transferable to any subsequent owner of a GOAL ZERO product.

EXCLUSIONS This Limited Warranty applis en to hardvare products manufactured by or for GOAL ZERO that can bo identified by the” GOAL ZERO" trademark, trade name, ar loge affixed to them. The Limited Warranty does not apply to any non-GOAL ZERO products, sven if packaged or sold with GOAL ZERO products. Nor-GOAL ZERO marufacturers, ar suppliers may provide their ou warranties, For consumers outside of the contiguous US 48 states, a one (1) year warranty period is enforced for ithium power stations and Boulder solar panels. Claims on lithium power stations and Beulder panels from consumers outside of the contiguous 48 states after the one (1) year warranty period will be handle on 2 case by case basis, in compliance with local regulatory standard. This warranty does not apply to: (to demage caused by accident, sbuse, misuse, misapplication, or nor GOAL ZERO products, (il) to damage ceused by service performed by anyone other than GOAL ZERO; lil to a product or a part that has been modified withaut the written permission of GOAL ZERO; (ho a product where any GOAL ZERO serial number has been removed or defaced, ar (to any product purchased through an online auction house. This limited warranty dogs nat apply to any battery cel or product cantaining a battery call unless the battery cell has been fully charged by yeu within seven (7) days after Your purchase af the product and at least once every 6 months thercafter. THIS WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL OR WRITTEN, EXPRESS OR IMPLIED, GOAL ZERO SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITŸ AND FITNESS FOR À PARTICULAR PURPOSE. IF GOAL ZERO CANNOT LAWFULLY DISCLAIM IMPLIED WARRANTIES UNDER THIS LIMITED WARRANTY, ALL SUCH WARRANTIES, INCLUDING WMARRANTIES OF MERCHANTABILITY AND FITNESS FOR À PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. No GOAL ZERO reseller, agent, ar employees authorized to make any modification, extension, or adéition to this warranty. IN NO EVENT WILL GOAL ZERO BE LIABLE FOR ANY DIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM ANY USE OR MALFUNCTION OF ANY GOAL ZERO PRODUCT, OR FROM ANY BREACH OF WARRANTY, INCLUDING DAMAGE T0 OTHER DEVICES. IN NO EVENT WILL GOAL ZEROS LIABILITY FOR ANY CLAIM, WHETHER IN CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY), OR UNDER ANY OTHER THEORY OF LIABILITY, EXCEED THE AMOUNT PAID BY YOU FOR THE GOÂL ZERO PRODUCT. Some states do not allow limitations on hou long an implied warranty lasts, sa the above limitation may not apply to you. This warranty gives you specific lagal rights, and You may also have other rights which vary from state to state.

OBTAINING WARRANTY SERVICE

Te obtain warranty service, you must contact our customer service team via telephone at (888) 704- 6250, or via email at support@goalzero.com. our customer service team determines that this is a warranty matter they wil give you a Return Material Authorization fRMA1 number. You must praperiy package the product, clear marking the RMA number on the package and including proof of eur purchase date with the product. You must then send the product by mail or courir, with shipping costs païdby you, te GOAL ZERO at 675 West 14600 South, Bluffdale, Utah, USA 84065. We will process your retum and send your repaired or replacement product to you 2t our expense for product being shipped to locations in North America. Far product purchased or being shipped outside of North America, please contact the local distributor from whom you purchased the product, or email suppart@goalzero. Com to obtain further distributor information.

FLT27#HHLET, 2.230W AC MF RSIE . Yeti DRE HRT EST.

FRA AH Em) HORAIRE AN) He + DL]

5. Goal Zero Yeti DR AFAL ELA IE, HXAT—VU2 27H — (1.888.794

‘SALE Goal Zero [#, AD