AROMA ELEGANCE THERM - Coffee maker MELITTA - Free user manual and instructions

USER MANUAL AROMA ELEGANCE THERM MELITTA

NUR AromaElegance® Therm: LED Blinkrhythmus (Taste DECALC/HARDNESS )

supply when unsupervised and before assembly, disassembly or cleaning.

• During operation, parts of the appliance such as the steam out GB For your safety let at the filter become very hot. The appliance complies with all valid Avoid touching these parts and European guidelines. avoid contact with hot steam. The appliance complies with all valid • Do not open the filter holder United Kingdom guidelines. during brewing. The appliance has been tested and certified by an independent test institute. • Do not use the appliance if the power cable is damaged. Please read the safety notes and the operating manual in full. To avoid danger you must pay attention to the • Do not allow the power cable to safety and operating instructions. Melitta is not liable come into contact with liquids. for damage caused by ignoring these instructions. • Never immerse the appliance in water. 1. Safety notice • Do not clean the parts that This appliance is intended for use come into contact with food in households and similar areas, with aggressive cleaning agents such as or scouring cream. Remove • in kitchens for employees in detergent residues with clean shops, offices and other comwater. Further information on mercial areas cleaning can be found under • in agricultural companies "Cleaning and care". • in motels, hotels and other • This appliance can be used by residential facilities and bed children from 8 years of age or and breakfast establishments older if they are supervised or Any other use is considered to have been instructed in the safe be improper use and may result use of the equipment and have in personal injury or damage to understood the potential hazards. property. Melitta® is not liable for Cleaning and maintenance must damage caused by improper use. not be carried out by children, unless they are 8 years or older Please observe the following insand are supervised. Keep the tructions to avoid injuries in case appliance and the power cable of misuse: away from children under 8 years • The appliance must not be placed of age. in a cupboard during operation. • The appliance may be used by • Connect the appliance only to a persons with reduced physical, properly installed earthed socket. sensory or mental abilities or • The appliance must always be lack of experience and/or knowdisconnected from the power ledge if they are supervised or Dear customer, Thank you for buying our AromaElegance® filter coffee maker. We hope you will be very happy with it. If you need further information or if you have any questions please contact Melitta® or visit us on the Internet at www.international.melitta.de

have been instructed in the safe • Do not subject the glass flask to use of the appliance and have high temperature fluctuations. understood the potential hazards.

• Children must not play with the 2. Before first use • Ensure that the power supply in your home appliance corresponds to that on the model plate on the base of the appliance. • Replacement of the power cable • Connect the appliance to a power source. Unused and all other repairs may only be cable can be stored in the base of the appliance . • Only Melitta AromaElegance Therm DeLuxe: carried out by Melitta® CustoSet the current time using the H and M buttons . This goes faster if you hold down the button. The mer Service or by an authorised appliance is only ready for use after setting repair shop. the time. By simultaneously holding down the H ®

• Do not use the jug in the microwave. • Do not place the jug on a hot stove. • Do not use the jug to store dairy products or baby food, as there is a risk of bacterial growth. • Do not lay the filled jug on its side, as liquid may escape. • Clean the outer casing with a soft, damp cloth. ONLY for plastic jugs with glass insert • To prevent damage to the glass flask, do not use hard or sharpedged objects (e. g. cutlery, dishwashing brushes or similar) for stirring or cleaning and do not fill with ice cubes or carbonated liquids.

and M buttons  for longer than two seconds, you can turn the display light on or off.

• All appliances have been tested during production to ensure they work perfectly. Therefore there may be for example water deposits remaining. Rinse the appliance twice with the maximum amount of water and without a filter bag or ground coffee, in order to clean it. • For the best coffee enjoyment and convenient use, the appliance is equipped with various features. These features are explained below.

3. Set water hardness

Depending on water hardness lime scale may build up in the appliance. This increases the appliance’s energy consumption as lime scale on the heating element can prevent the water heating effectively. To avoid damage the appliance must be descaled regularly. The descaling display helps you with this . If the red LED is permanently lit this shows that the appliance needs to be descaled (see point 6). The appliance is pre-set for a high level of water hardness (level 4). You can find out the level of water hardness in your area by asking your local water provider or by using water hardness measuring strips available in the shops. For softer water the descaling display can be adjusted to descale less often: Melitta® AromaElegance® Therm • Hold down the DECALC/HARDNESS button  for longer than two seconds. The red LED will start to flash. In the factory settings the LED flashes four times with the following pauses (……). • You can set the water hardness at three other levels. By briefly pressing the DECALC/HARDNESS button  the display changes to flashing briefly once, 9

twice or three times, each time followed by a pause

(……, ……, ……). • The settings and display are shown in table 1. • Once you have set the desired level of water hardness, hold down the DECALC/HARDNESS button  again for longer than two seconds. The red LED will go off and your settings are saved.

AromaElegance® Therm DeLuxe • Hold down the DECALC/HARDNESS button  and by briefly pressing the M button  set the desired level of water hardness. The hardness level will be shown in the display. • Once you have set the desired level of hardness let go of the DECALC/HARDNESS button . Your settings are now saved.

• Water hardness cannot be programmed while brewing. • The last water hardness level chosen remains even after removing the power cable.

For aromatic coffee flavour and the best fit for your filter bag in the filter holder, we recommend using Melitta® filter bag 1x4®.

• Ensure that the appliance is connected to a power source. • Remove the detachable water tank by holding the recessed grip and pulling straight up . • Remove the water tank lid and fill with the desired amount of fresh water from the tap. Using the water level indicator on the tank you can choose the correct number of cups. Small cup symbol = approx. 85ml coffee per cup, large cup symbol = approx. 125 ml coffee per cup . • Close the tank by replacing the lid and insert the tank back in the appliance. Please ensure that you replace the tank upright in the appliance. The guide rails on the appliance (left of the tank) will help you with this . • Swivel the filter to the right and remove it from the holder . You can now conveniently rest the filter on your kitchen worktop. • Fold a Melitta® filter bag 1x4® at the embossed seams and place in the filter holder. Press the filter bag into the filter holder by hand, to ensure the best fit . • Put the ground coffee into the filter bag. The amount depends on your personal taste. We recommend using 6 g of ground coffee per large cup. • Put the filter back into its holder. For this hang first the eyelet of the filter on the top of the swivel arm and afterwards press the round base into the clip. An audible click tells you it is inserted properly . • Swivel the filter back into the appliance and place the therm jug with closed lid  in the appliance . • Turn the appliance on . The green LED lights up and brewing begins. • To fully develop the flavour of your coffee even when preparing less than 6 cups, the Melitta® AromaElegance® Therm models are fitted with the Aroma Control feature as standard. So even when preparing small quantities of coffee you get the best aromatic coffee experience. When making 2-5 cups press the START button  for longer than two seconds. The green 10

LED flashes and brewing begins.

• The appliance turns of automatically short after brewing. This avoids the unnecessary use of electricity and saves energy. You can of course turn the appliance off manually at any time. • The drip stop prevents your coffee from dripping, when you remove the pot from the appliance . • With the help of the detachable filter you can dispose of the coffee filter bag simply and easily .

4.2.Timer feature (ONLY Melitta®

AromaElegance® Therm DeLuxe) The appliance is fitted with a timer. This allows you to set a time at which brewing will automatically begin. • Prepare the appliance as described in point 4.1. brewing coffee, but without pressing the START button. • To set the desired start time hold down the TIMER button  and press the H and M buttons  repeatedly to set the desired start time. This goes faster if you hold down the H and M buttons. The first time you programme it, the display will show 00:00. • After letting go of the TIMER button, the current time will show. The chosen start time is saved until you set a different time or remove the appliance from the power source. • By briefly pressing the TIMER button again, the timer feature is activated for the next brewing process. To show this, the white LED  lights up and the programmed start time shows briefly in the display. • If you wish to activate the Aroma Control for the programmed brewing, then press the START button  for longer than two seconds. Now as well as the white LED, a green LED  will light up. • The appliance automatically starts to make the coffee at the time you have set. • By pressing the TIMER button again, the timer feature can be deactivated at any time. The white LED goes off . • If you want to make coffee before the programmed start time then press the START button . The timer feature will then be deactivated.

5. Using the insulated pot

• The brewed coffee flows through the central valve in the insulated lid of the pot. • To pour coffee press down on the sealing lever . • Remove the lid simply by pressing the seals on the side while lifting the lid up .

6. Cleaning and maintenance

• The housing can be cleaned with a soft damp cloth. • The jug lid, the filter insert and the swivel filter can be washed in the dishwasher. Descaling Based on the water hardness level you have set (see point 3) the descaling programme should be run promptly after the DECALC/HARDNESS button  lights up. The descaling programme is only available when the descaling display lights up. • Follow the manufacturers instructions regarding amounts and pour the descaler into the water tank. We recommend using Melitta® "Anti Calc Liquid for Filter Coffee & Aqua Machines".

• Briefly press the DECALC/HARDNESS button .

The red LED begins to flash. In the display the word “CALC” flashes (ONLY Melitta® AromaElegance® Therm DeLuxe). • The descaling process will run automatically, it takes about 25 minutes. • Attention: Only by carrying out the descaling process completely, all limescale deposits will be removed and the red light on the DECALC/HARDNESS button will go off. The descaling process should therefore not be interrupted before it has run for the full 25 minutes. • After the descaling process is completed the DECALC/HARDNESS button light will go off. The appliance will turn off automatically and go into stand-by mode. • At the end of the descaling process, the appliance should be rinsed twice through, using the maximum amount of water without coffee, in order to completely remove any remaining limescale deposits.

7. Notes on disposal

• Appliances labelled with this symbol are subject to European guidelines for WEEE (Waste Electrical and Electronic Equipment). • Electric appliances do not go in the household bin. Dispose of the appliance in an environmentally friendly way using suitable collection systems. • Packaging materials are raw materials and can be recycled. Please recycle them.

VAIN AromaElegance® Therm:

LEDin vilkkuminen (painike DECALC/HARDNESS )

In addition to the legal guarantee claims, to which the end user is entitled relative to the seller, for this device, if it was purchased from a dealer authorized by

Melitta® due to his consulting competence, we grant a manufacturer´s guarantee under the following conditions: 1. The guarantee period begins with the day the product was sold to the end user. The guarantee is 36 months/ 60 months. The purchase date of the device must be verified by a purchase receipt. The device was designed and built for household use only. It is not dedicated for a commercial use. Guarantee performances lead neither to an extension of the guarantee period nor to a new beginning of the guarantee period for the device or installed spare parts. 2. Within the guarantee period we will correct all device defects that are based on material or manufacturing errors, through repair or replacement of the device at our discretion. Replace parts become the property of Melitta®. 3. Defects that occurred due to improper connection, improper handling, or repair attempts by nonauthorized persons are not covered by the guarantee. The same applies for failure to comply with the use, care, and maintenance instructions as well for the use of consumables (e.g. cleaning and decalcifying agents or waterfilters) that do not correspond to the original specifications. Wear parts (e.g. seals and valves) and fragile parts like glass are excluded from the guarantee. 4. Guarantee performances are processed via the Service Hotlines for the respective country (see information below). 5. These guarantee conditions apply for devices purchased and used in UK If devices are purchased in foreign countries or brought into foreign countries, then guarantee performances will only be provided as specified in the guarantee conditions applicable for this country.

Hortonwood 45 Telford, Shropshire, TF1 7FA United Kingdom Tel: +44(0)800 0288002 www.melitta.co.uk