Blizzard CX1 Comfort EcoLine - SKMP3 - Blizzard CX1 Electro EcoLine - SKCP3 - Vacuum without a bag MIELE - Free user manual and instructions

Product type	Bagless vacuum cleaner
Brand	Miele
Model	Blizzard CX1 Comfort EcoLine (SKMP3) / Blizzard CX1 Electro EcoLine (SKCP3)
Usage	Dry surface cleaning
Power brush	Motorized, with 5-level height adjustment
Power supply	220–240 V, 50–60 Hz
Features	Automatic shut-off via thermal protection; On/Off button on handle
Included accessories	Power brush, suction hose, telescopic tube
Maintenance	Clean with a dry or slightly damp cloth; cut threads and hair around the cylindrical brush
Safety	Do not vacuum liquids, hot ashes, flammable gases; keep out of reach of children
Reparability	Repairs exclusively by an authorized Miele professional
Warranty	Subject to repairs by an authorized Miele service
Weight	Approx. 8.5 kg (estimated)
Dimensions (L × D × H)	Approx. 40 × 30 × 50 cm (estimated)

Frequently Asked Questions - Blizzard CX1 Comfort EcoLine - SKMP3 - Blizzard CX1 Electro EcoLine - SKCP3 MIELE

How to use the power brush with the vacuum cleaner?

Connect the power brush to the vacuum cleaner according to the diagrams in the manual. Use the On/Off button on the handle to start or stop the brush separately. Move slowly back and forth over the carpet.

How to adjust the height of the power brush?

Press the height adjustment pedal (diagram 4) until the desired level is reached. Five levels are available (1 = low distance, 5 = high distance) to adapt to your floor covering.

What to do if the power brush stops by itself?

The thermal protection has activated in case of overload or blockage. Turn off the vacuum cleaner, unplug it, check the suction paths and filters. Let the brush cool down (about 10 minutes) before using it again.

How to clean the cylindrical brush?

Turn off the vacuum cleaner and unplug it. Use scissors to cut threads and hair wrapped around the brush. A guide groove indicates where to pass the scissors. The residues will then be vacuumed up.

Can I vacuum liquids with this vacuum cleaner?

No, never vacuum liquids or damp items. Allow shampooed carpets and rugs to dry completely before vacuuming. The vacuum cleaner and power brush are not designed for liquids.

Can I use the power brush on precious carpets?

Avoid using the power brush on hand-woven carpets (Berber, Persian) or very long pile carpets, as it could pull threads. Preferably use it on sturdy textile floor coverings.

How to connect the power brush to the vacuum cleaner?

Refer to diagrams 2 and 3 in the manual. Connect the suction connector to the socket on the vacuum cleaner. Make sure the unlocking pedal is engaged.

What regular maintenance does the vacuum cleaner require?

Clean the tank and filters regularly. For the power brush, cut threads and hair around the brush. Never immerse components in water; use a dry or slightly damp cloth.

Where can I have my Miele vacuum cleaner repaired?

During the warranty period, contact only an authorized Miele after-sales service. Any unauthorized repair voids the warranty.

Is the power brush compatible with all Miele vacuum cleaners?

Yes, this power brush is designed exclusively for Miele vacuum cleaners. Do not use it with another brand, as this could damage the device.

USER MANUAL Blizzard CX1 Comfort EcoLine - SKMP3 - Blizzard CX1 Electro EcoLine - SKCP3 MIELE

This Electrobrush complies with all relevant local and national safety requirements. Inappropriate use can, however, lead to personal injury and damage to property.

Please read the operating instructions supplied with the Electrobrush before using it for the first time. This prevents both personal injury and damage to the appliance.

Keep these instructions in a safe place and pass them on to any future owner.

Always disconnect the vacuum cleaner from the mains supply when you have finished using it, before changing over accessories, as well as for maintenance work and cleaning. Switch off at the wall socket and withdraw the plug.

Correct application

The Miele Electrobrush is a motor-driven accessory for use with Miele vacuum cleaners only. It must not be used with vacuum cleaners produced by other manufacturers.
The Electrobrush must only be used for household purposes to vacuum and brush dry floor surfaces. Do not use on people or animals.

Any other use, modification or alteration to the Electrobrush is not permitted.

The vacuum cleaner and Electrobrush can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, if they are supervised whilst using them or have been shown how to use them in a safe way and understand and recognise the consequences of incorrect operation.

Safety with children

Danger of suffocation. Packaging, e.g. plastic wrappings, must be kept out of the reach of babies and children. Whilst playing, children could become entangled in packaging or pull it over their head and suffocate.
Children under 8 years of age must be kept away from the vacuum cleaner and Electrobrush unless they are constantly supervised.
Children 8 years and older may only use the vacuum cleaner and Electrobrush unsupervised if they have been shown how to use them safely and recognise and understand the consequences of incorrect operation.
Children must not be allowed to clean or maintain the vacuum cleaner and Electrobrush unsupervised.
Please supervise children in the vicinity of the vacuum cleaner and Electrobrush and do not let them play with them.

Technical safety

Before connecting the Electrobrush please ensure that the connection data on the data plate of the vacuum cleaner (voltage and frequency) match the mains electricity supply exactly. The vacuum cleaner is suitable for use with 50Hz or 60Hz without modification.
Please check the Electrobrush, the electro suction hose and the electro telescopic suction tube for any visible signs of damage before using them. They must not be used if there is any sign of damage to them.

Repairs to the Electrobrush, electro suction hose and electro telescopic suction tube during the guarantee period should only be undertaken by a Miele authorised service technician. Otherwise any subsequent damage to them will not be covered by the guarantee.

en - Warning and Safety instructions

Do not let the vacuum cleaner, the Electrobrush, the electro telescopic suction tube and the electro suction hose get wet. Clean only with a dry cloth or slightly damp cloth when disconnected from the mains supply.
The Electrobrush, electro telescopic suction tube and the electro suction hose contain electrical cables. The plug connectors must not come in contact with water. Danger of electric shock. They should only be cleaned with a dry cloth.

Repairs should only be carried out on the vacuum cleaner, the Electrobrush, the electro telescopic suction tube and the electro suction hose by a Miele authorised service technician. Repairs and other work by unqualified persons can cause considerable danger to users.
Caution: The vacuum cleaner handle, hose and Electrobrush contain electrical connections. The handle, suction tube, suction hose and Electrobrush are not parts which can be serviced by the user.
The hose should be checked regularly for signs of damage. Do not use the hose if it is damaged.

Correct use

Never touch the roller brush while it is rotating.
Do not use the Electrobrush at head level.
Keep the Electrobrush away from curtains, clothing, etc. as these could be vacuumed in and become entangled in the roller brush.
Do not vacuum up anything which has been burning or is still glowing e.g. cigarettes, ashes or coal, whether glowing or apparently extinguished.
Do not vacuum up any inflammable or combustible liquids or gases and do not vacuum in areas where such substances are stored.

Do not use the vacuum cleaner to vacuum up any water, liquid or damp dirt. Wait until any freshly cleaned or shampooed rugs or carpets are completely dry before attempting to vacuum.

Miele cannot be held liable for damage caused by incorrect use or operation or by non-compliance with these Warning and Safety instructions.

Illustrations

The illustrations referred to in the text are shown at the end of these operating instructions.

Using the Electrobrush

The Electrobrush is driven by its own motor.

It is very effective at removing deep seated dirt and preventing areas of frequent use being trodden into a path.

Two of the four rollers are height-adjustable, allowing you to adjust the gap between the Electrobrush and the floor.

Guide to the appliance (dia. 1)

(1) Release button
② Connection socket
③ Foot switch for releasing the connection socket
④ Height indicator
⑤ Foot switch for adjusting the height

Use

Recommended use

Please note that the Electrobrush should not be used for vacuuming deep-pile rugs and carpets or valuable hand-knotted rugs and carpets, e.g. Persian and oriental rugs etc. There is a danger of the threads being pulled out.

The Electrobrush is particularly suitable for intensive vacuuming of carpets which are subject to hard wear.

The standard floorhead or one of the Miele floorbrushes should be used for cleaning hard floors.

It is also important to observe the flooring manufacturer's cleaning and care instructions.

How to use the Electrobrush

To achieve the best results, pass the Electrobrush slowly backwards and forwards over the carpet or floor.

For rugs and carpets with fringes always draw the Electrobrush from the middle of the rug or carpet across the fringe towards the floor.

Connecting the Electrobrush to your cylinder vacuum cleaner (dia. 2 + 3

The position of the socket on your vacuum cleaner will vary depending on model.

Connect the Electrobrush to your vacuum cleaner as illustrated.

Adjusting the height (dia. 4)

The Electrobrush has five settings for adjusting the distance between the Electrobrush and the floor. The display shows the setting selected.

Setting 1 - closest to the floor

Setting 5 - furthest away from the floor

Press the foot switch repeatedly until the required setting is reached.

Releasing the connection socket

Press the foot switch for releasing the connection socket (see "Guide to the appliance") and release it.

On/off switch on the handle

The electro hoses (SES) have an on/off switch on the handle which can be used to switch the Electrobrush on and off independently.

This means that you can switch the Electrobrush off during vacuuming and the vacuum cleaner will continue to operate using suction only. This is useful when moving from vacuuming a fitted carpet to a rug, for example.

Problem solving

The Electrobrush switches itself off.

The overheating protection mechanism has been activated due to overheating or a blockage.

• Disconnect the vacuum cleaner from the electrical supply immediately. Switch off at the wall socket and unplug it.
• Check the vacuum cleaner for any blockages and check all the filters in the vacuum cleaner.

The Electrobrush has to cool down. To speed this up:
Reconnect the vacuum cleaner to the mains supply and switch it back on.

The Electrobrush will be ready for use again after about ten minutes.

Maintenance

Always disconnect the vacuum cleaner from the power supply for maintenance work and for cleaning. Switch off at the wall socket and unplug it.

Removing threads and hairs (dia. 5)

Use scissors to cut any threads or hairs which have wound around the roller brush. There is a groove on the roller to guide you.

Then run the vacuum cleaner to vacuum up the bits.

3aIpy3HHeHn I npenTCTByeT 6pa30BaHnIO 3aONTaHHbIX yHaCTKOB.

Два u3 cheTbipex polnKOB mOryt peRyIInpoBaTbcra NO BbICOTE, 6laRoIapra 3TOMy Bbl MoXeTe NO JKeJaNHIO yCTaHOBNTb 3a3Op MExdY əJIeKTPOUcEeTKoI INIOLOM.

Oncsahanne npnbopa (pnc.1)

① KhoNka pa36IoknpoBkn
② Bca sbBaOuIy naTpy60K
③ KhoJa oTcoeHHeHnBcAsBaIouSeRo NaTppy6ka
④ INHДИКaTOPpeRyIINpOBKnNo Bbl-COTe
⑤ Khonka pereynipOBkn no BbICote

3KcπηyaTaçn

Pekomehdaunno npmeHeHHIO

He nbilecoBte BbICOKKaueCTBeHHbIe KOBpI pyHOn paObTbI,Ha-npImep,6ep6epckne,pepcnckne nT.I.,a TaKKe KOBpI N KOBoBbIe NO-KpbITnC OueHb DnIHbIM BOpCOM.CyueCTByet OnaCHocTb BTrnBaHnHn Hnte TaKx KOBPOB.

3NeKtpoUeTka OcO6eHNO npnroJHa DJI INHTeHCNBHO YNCTKN IpOuHbIX TEKCTINbHBIX HAnOJBHbIX NOKpbITnI.

I OndKJIIOHnTe 3NeKToPoUeTky K nbIeCocCy corlaacHo pncyHKam.

PerynipOBka no BbICote (pnc. 4)

ДяберекноуборкнHaNoIbHOro no-KpbTnBbMOKeTe BbIbpaTb OdINH n3ЯТи pa3MepOB 3a3Opa MekJy UeTKoIиnoIOM. BbIbpaHbI ypoBeHb 6ydetPOKa3aH Ha INDnKaTope.

UpoBHe 1- He6OJIbIooe pacCTOaHne UpoBHe 5- 6OJIbIooe pacCTOaHne

HakimaiTe KhoNky Do doCTNXKeHnJ XeJaEMOro yPoBnJ.

OTcoeHHeHne BCaCbIBaIOUeRo naTpy6ka

HaKMMTe Ha KHONKy OTCOeHNHeNBAcBbAIOUeRo NaTpy6ka (CM. ONIcAHne npi6opa) n pa36nokupyteero.

BbikniouataTeNb ha pyuke

Tn6Kne 7aHaHn C 3JeKtpoPBODOM (SES) OcHaueHbI KhoNkoB KbI/Bbl Na pyuKe, C NOMOUsbIO KOtOpoi Bbl MoKeTe OTdJIbHO BKlIOUaTb N BblKnIOUaTb 3JeKTPoUeTky.

KhoNka no3BOLJAE T B clyuae Heo6xOДMocTn OTKJIQUHTb əJIeKTPOUeTky,HaIpIMep, pRi nepeXoJe OT KOBpOBOrO NOKpbITNA K BblCOKOKaYeCTBeHHOMy KObpy.

YcTaPHeHne HEnCnPaBHOcTei

3NeKtpooueTKa OTKJIIOuaeTcra aBTOMaTnueckn.

Cpa6oTaJa TepMo3aUHTa, HapnMpErp, n3-3a nepeRpy3Kn nIIN 3acopeHnKaHaNoB BCacbIBaHn.

Cpa3y Je BbIKJIIOHTe NblIeOCn BbIHbTe CeTEByIO BuNKy I3 po3eTKN.
■Поверп Te KaHaJIb I BcAbIbAHnI n BCEФИЛТьIпIJIeCOca.

3NeKtpoTkeKa DOnxHa ocTbITb. 3TOrO MoXHo 6bICTpo DoCTnB cJeDyUOuM 6pa3OM:
CHOBa NpOKJIIOHHTe PbIeCoc K 3JIeK- TPOcETn IN BKJIIOHHTe eRO.