Multicut 8000 Vision - Washing machine CECOTEC - Free user manual and instructions

Product type	Jigsaw
Brand	Cecotec
Model	Multicut 8000 Vision
Power supply	220-240 V ~ 50 Hz
Variable speed	Electronic speed regulator
Pendulum action	4-position selector
Laser	Yes, with independent switch
LED light	Yes, integrated work light
Chip blowing	Blower switch
Dust extraction	Vacuum adapter
Cutting capacity (wood)	Approx. 80 mm
Cutting capacity (steel)	Approx. 10 mm
Parallel guide	Included, max distance approx. 13 cm
Blade change	Keyless quick-release clamp
Number of blades included	8 saw blades
Weight	Approx. 1.8 kg
Dimensions (L x W x H)	Approx. 22 x 8 x 20 cm
Adjustable sole	Yes, with adjustment lever
Maintenance	Regular cleaning of openings and accessories
Safety	Protective cover, unplug before any maintenance or blade change
Spare parts	Blades, sole, parallel guide, vacuum adapter available from after-sales service
Box contents	Jigsaw, 8 blades, guide rule, instruction manual

Frequently Asked Questions - Multicut 8000 Vision CECOTEC

How to replace the jigsaw blade?

Always unplug the saw before changing the blade. Use the quick-release clamp located on the front of the tool. Press the clamp to release the blade, remove it, insert the new blade making sure it is properly engaged, then release the clamp.

How to install the parallel guide?

Loosen the locking screws of the guide, insert the parallel guide into the sole supports, then tighten the screws. The guide allows straight cuts at a maximum distance of approximately 13 cm from the edge.

How to activate the laser and LED light?

Use the dedicated on/off switch for the laser and LED light. This switch is located on the housing, near the handle. It allows turning the laser on or off for increased precision and the LED lamp to illuminate the work area.

How to adjust the cutting speed?

The speed regulator is located on the handle, near the trigger. Turn it to adjust the speed according to the material to be cut. A slow speed is suitable for metals and a fast speed for soft woods.

What accessories are included with the product?

The box contains the jigsaw, 8 saw blades, a guide rule (parallel guide) and the instruction manual.

How to maintain the jigsaw?

After each use, unplug the tool. Remove dust with a brush or dry cloth, especially around the ventilation openings. Regularly check the condition of the sole and blades. Never use aggressive solvents.

How to connect a vacuum cleaner to the saw?

Attach the dust extraction adapter to the hole provided at the rear of the saw, then connect your vacuum hose. This effectively captures chips and dust during cutting.

How to perform a bevel cut?

Loosen the sole adjustment lever located under the housing. Tilt the sole to the desired angle (usually 0° to 45°), then tighten the lever to hold the position. Check that the blade is not in contact with the sole.

What to do if the saw does not start?

Check that the saw is properly plugged in and that the switch is not in the off position. Make sure the trigger is fully pressed. If the problem persists, contact the official Cecotec after-sales service.

What type of blades are compatible?

The saw is compatible with T-shank blades (T-shank), commonly used for jigsaws. You can use blades for wood, metal or synthetic materials according to your needs.

USER MANUAL Multicut 8000 Vision CECOTEC

Sierra de calar sin mango / Handless reciprocating saw

1. Parts and components 11
2. Before use 11
3. Operation 12
4. Cleaning and maintenance 15
5. Copyright 15

SOMMAIRE

The graphics in this manual are schematic representations and may not exactly match the product.

2. BEFORE USE

• This tool comes in a packaging designed to protect it during transport. Take the tool out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place to prevent damage to the tool if you need to transport it in the future. If you wish to dispose of the original packaging, make sure all items are recycled properly.
• Check that all parts and components are included and in good condition. If there is any piece missing or in bad conditions, contact the official Cecotec Technical Support Service immediately.

Box content

• Jigsaw
• 8 saw blades

ENGLISH

• Guide ruler
• Instruction manual
• Do not remove the product serial number in order to keep proper traceability of the appliance in case assistance is required.

3. OPERATION

3.1 Parallel guide (Fig. 2)

The parallel guide (1) enables straight and precise cuts parallel to the workpiece edge. It can be fitted to either side of the saw, with a maximum cutting distance of approximately 13 cm.

Installation:

1. Loosen the locking screws (16).
2. Insert the parallel guide into the saw base supports (10).
3. Tighten the locking screws to secure the guide.

Removal:

1. Loosen the locking screws (16).
2. Remove the parallel guide (1).

3.2 Dust collection adapter (Fig. 3)

To keep the work area clean and improve visibility, connect an external dust extraction system (such as a vacuum cleaner) using the supplied adapter (9).

Important! When using an external extraction system, slide the dust blower switch (12) forward (extraction mode).

Installation:

1. Slide the dust collection adapter (9) fully into the guide rail between the tool and saw base (10).
2. Connect a suitable vacuum hose (not included) to the adapter.

Removal:

1. Disconnect the vacuum hose.
2. Pull the dust collection adapter (9) firmly to remove it.

3.3 Base Protector (Fig. 4)

To protect delicate surfaces from scratches, use the base protector (11).

Installation:

1. Place the base protector (11) at the front of the saw base (10).
2. Press the rear tabs of the protector onto the saw base (10) until they click into place.

Removal:

Carefully push the base protector outwards.

3.4 Switching On and Off

To switch on: press the trigger (7).

To switch off: release the trigger (7).

Switch lock (19): For continuous cutting, press the lock button (19) while holding the power switch.

To unlock the switch: Release the trigger.

3.5 Speed setting (Fig. 5)

Adjust the cutting speed according to the material and task by turning the speed knob (8) on the rear of the handle:

- Higher number: Faster speed.

- Lower number: Slower speed.

Material	Speed	Tip
Steel	Low	Use suitable lubricant/coolant to protect the blade.
Aluminium	Medium	Use suitable lubricant/coolant to protect the blade.
Plastic	Medium/Low	Water is usually sufficient as a coolant.
Hardwood	Medium
Softwood	High

3.6 Changing the saw blade (Fig. 6)

Caution! Disconnect the jigsaw from the power supply before changing the blade.

1. Pull the protective guard (2) upwards.
2. Push the quick-release blade clamp to the front stop.
3. Insert the new blade (with the teeth facing forward) into the guide slot.
4. Make sure the blade is properly fitted and locked in place.
5. Lower the protective guard.

ENGLISH

3.7 Protective guard

Installation:

1. Insert the two assembly tabs of the protective guard (2) into the corresponding holes on each side of the tool housing.
2. The guard will click into place. It can be tilted upwards 90° .

Removal: Carefully pull the assembly tabs of the protective guard (2) from the housing holes.

3.8 Base plate adjustment (Fig. 7 and 8)

Important! To achieve maximum mitre angle (left or right), remove the protective guard (2) and base protector (11).

Release: Pull the base adjustment lever (Fig. 7), located on the lower right of the tool.

Sliding: Slide the base plate (10) forward.

Tilting: Tilt the base plate to the desired angle ( 0° to 45° , with preset positions at -45° , -22.5° , 0° , 22.5° and 45° ).

Fixing: Slide the base plate back until the teeth engage with the positioning pin.

Locking: Push the base plate adjustment lever to the locked position. Make sure it is firmly secured.

3.9 Laser and LED light (Fig. 9)

Laser on/off: Use the laser/LED light switch (5).

Alignment:

1. Place the jigsaw over the workpiece, aligning it with the cutting start mark.
2. Check that the laser line matches the marked cutting line.

Laser/LED light switch functions:

• 1 press: LED light and laser.
• 2 presses: LED light only.
• 3 presses: Laser only.
• 4 presses: Off.

Make sure to switch off the laser after use.

3.10 Airflow direction (Fig. 10)

Slide the dust blower switch backwards to direct airflow and prevent sawdust from covering the cutting mark.

3.11 Pendulum action (Fig. 11)

Adjust the pendulum action to optimise the cutting performance according to the material:

Setting	Action	Applications
0	Straight cut	Mild steel, stainless steel, plastics.
I	Small orbit	Clean cuts in wood and plywood; mild steel, aluminium, hardwood.
II	Medium orbit	Fast cutting in wood and plywood; cutting of aluminium and mild steel.
III	Large orbit	Fast cutting in wood and plywood.

4. CLEANING AND MAINTENANCE

Regular cleaning and maintenance are essential to extend the service life of your jigsaw and ensure safe and efficient performance.

Important warnings:

• Always switch off the tool before performing any maintenance or cleaning tasks.
• Always wear protective gloves when handling the saw blade to prevent accidental cuts.
• If you need to carry out repairs or maintenance not described in these instructions, please contact Cecotec's Official Technical Support Service.
• Use only original Cecotec spare parts to ensure safety and proper operation of the tool.

4.1 Cleaning

• Never spray the tool with water or immerse it in any liquid. This could cause an electric shock and irreparably damage the tool.
• Do not use aggressive cleaning agents or solvents. These chemicals can damage the tool's plastic parts.
• Always keep the ventilation slots, motor housing and handle clean. Use a damp cloth or soft brush to remove dust and dirt.

4.2 Maintenance

- This tool is designed to require minimal maintenance. However, check the condition of the saw blade regularly and replace if worn or damaged.

4.3 Transport

• Before transporting the jigsaw, remove the saw blade.
• Transport the tool by holding it firmly and securely.

4.4 Storage

- Always store the jigsaw and its accessories in a dry, clean, dust-free place and out of the reach of children.

ENGLISH

5. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

1. PIÈCES ET COMPOSANTS

Image 1:

3.9 Laser a LED svítilna (Obr. 9)

3.4 On/Off3.4 On/Off

Advertisements Importants: