Drumfit Wod Rider 2000 Eolo - Fitness Equipment CECOTEC - Free user manual and instructions

Product type	Stationary exercise bike with flywheel and integrated fan
Brand	Cecotec
Model	Drumfit Wod Rider 2000 Eolo
Category	Fitness equipment
Usage	Home, indoor only
Maximum user weight	110 kg
Resistance type	Air fan (aerodynamic braking)
Flywheel	Diameter 415 mm, width 55 mm
Handlebar	Height adjustable with knob
Seat	Height adjustable with knob
Stabilizers	Front and rear stabilizer bars
Screen / Monitor	Battery-powered training monitor
Monitor power supply	Batteries, to be inserted respecting polarity
Main functions	Cardiovascular training, air resistance via fan, effort data tracking
Safety	Clearance of 0.6 m around the device, complete stop before dismounting
Maintenance	Regularly check the tightening of screws and nuts
Cleaning	Soft cloth, avoid abrasive products
Operating conditions	Flat and stable surface, do not use outdoors
Spare parts and repairability	Parts available through Cecotec after-sales service, repair by a professional
Warranty and after-sales service	Legal warranty of conformity, Cecotec after-sales service for any intervention
Approximate dimensions	Approximately 120 x 65 x 130 cm
Approximate weight	Approximately 30 kg

Frequently Asked Questions - Drumfit Wod Rider 2000 Eolo CECOTEC

What is the maximum weight supported by the bike?

The maximum user weight is 110 kg. Make sure to respect this limit to avoid any risk of breakage or injury.

How do I adjust the height of the handlebar and seat?

The handlebar height is adjusted with the indicated adjustment knob, and the seat height with the corresponding knob. Simply loosen the knob, adjust the height, then tighten it well before use.

Can I use this bike outdoors?

No, this device is designed for indoor domestic use. It must not be exposed to weather conditions or used in a professional environment.

What should I do if I hear an unusual noise during exercise?

Stop using the bike immediately. Check that the screws and nuts are properly tightened. If the noise persists, contact Cecotec after-sales service before resuming exercise.

Is this bike suitable for children?

This product is exclusively designed for adults. It must not be used as a toy; children should be kept away during use and must not play with the device.

How should I clean and maintain the bike?

For cleaning, use a soft, dry cloth without abrasive products. Regularly check the tightening of screws and nuts, and inspect for signs of wear to ensure an optimal safety level.

What safety distance should I allow around the device?

Leave a space of at least 0.6 meters around access areas to allow evacuation in case of emergency. Ensure that no object blocks the entrance and exit.

Does the device have a power supply?

The device operates without a mains connection. The monitor is powered by batteries; insert them respecting polarity and remove them if storing for an extended period.

How can I avoid injuries with the flywheel?

This bike is equipped with a flywheel. Wait until the pedals are completely stopped before getting off. The inertia can be dangerous if you leave the seat prematurely.

What should I do in case of ingestion or battery leakage?

If a battery is swallowed, consult a doctor immediately. If a battery leaks, wash the affected skin with water and soap; for eyes, rinse thoroughly with water for 10 minutes and consult a doctor.

USER MANUAL Drumfit Wod Rider 2000 Eolo CECOTEC

DRUMFIT

Safety instructions 8

1. Parts and components 50

2. Before use 52

3. Product assembly 53

4. Information on exercising 55

5. Cleaning and maintenance 56

6. Troubleshooting 57

7. Technical specifications 57

8. Disposal of old electrical and electronic appliances 58

9. Technical support and warranty 58

10. Copyright 58

SOMMAIRE

Read these instructions thoroughly before using the device. Keep this instruction manual for future reference or new users.

- Read the entire manual before assembling and using the machine. Safe and efficient use can be only achieved if the machine is properly assembled, maintained, and used. It is your responsibility to make sure every user is informed about the warnings and precautions stated in this instruction manual.

- Before starting a training session, it is recommended for you to consult your doctor if you have any adverse health or physical condition that may pose a risk to your safety or make it difficult to use the exercise bike properly. Your doctor's advice is essential if you are taking medication that affects your heart rate, blood pressure, or cholesterol level.

- Be aware of your body signals. Incorrect or excessive exercise can deteriorate your health. Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, extreme shortness of breath, dizziness, or nausea. If you experience any of these conditions, you should consult your doctor before continuing with your training.

- This machine can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the machine in a safe way and understand the hazards involved. Children must not play with the device. Cleaning and user maintenance must not be carried out by unsupervised children.

- Keep children and animals away from the assembling area,

as small parts could cause risk of suffocation if swallowed.

• Keep children and pets away from the machine. Do not allow children to use it and/or play with the machine. It is designed for adults only.
• Use the exercise air bike on a solid, even surface with a protective cover for your floor or carpet.
• Make sure that the screws and nuts are securely fastened before using the machine.
• The safety level of the machine can be only maintained through regular examination for damage and/or signs of wear and tear.
• Use the machine as indicated in this instruction manual. If you find any defective component while assembling or checking the machine, or if you hear any unusual noise coming from the equipment during use, stop using it. Do not use the equipment until the problem has been solved.
• Make sure you have enough space to lay out the parts before starting. Leave a free space of at least 0.6 m in front of all access areas of the machine in case of emergency. You can share the access areas with other machine nearby. Always ensure there are not any objects blocking the entrance and exit of the machine.

• Wear suitable clothing while using the machine. Avoid wearing loose clothing which may get caught in the equipment.
• WARNING: this training machine is not suitable for high-precision purposes. This equipment is HC class.
• WARNING: this machine operates by means of a flywheel. Be careful when in motion and ensure that it completely stops before getting down, as the inertia of the flywheel and pedals could cause injury to yourself or others.
• Maximum user weight: 110 kg.
• It is not recommended for outdoor use.
• This machine is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices.
• The air bike is not suitable for therapeutic use.
• Care must be taken when lifting or moving the equipment so as not to injure your back. Always use proper lifting techniques and/or assistance.
• If repairs are required, please consult your supplier for further information or contact Cecotec Customer Service.
• If any parts protrude from the machine, they may interfere with the user's movement.

Instructions on batteries

- Do not burn or expose the batteries to high temperatures, as they may explode.

- Leaks from the batteries can occur under extreme conditions. Do not touch any liquid that leaks from the batteries. If the liquid gets into contact with skin, wash immediately with soap and water. If the liquid gets into the eyes, wash them immediately with clean water for a minimum of 10 minutes and seek medical attention. Wear gloves to handle the

battery and dispose of it immediately in accordance with local regulations.

- Avoid contact between the batteries and small metal objects such as paper clips, coins, keys, nails, or screws.

- Do not tamper with the batteries in any way.

- The batteries must be removed for safe disposal of the machine.

- Keep the batteries out of the reach of children when there is a risk of ingestion.

- Battery ingestion can cause burns, soft-tissue perforation, and death. It can cause severe burns within two hours of the ingestion.

- In case of battery ingestion, please seek medical help immediately.

- The batteries' power supply terminals must not be short-circuited.

- If the machine is to be stored for a long period of time, it is advisable to remove the batteries.

- The batteries must be inserted in the correct position. When replacing batteries, check the polarity.

INSTRUCTIONS DE SÉCURITÉ

A. Handlebar
B. Console
C. Handlebar-height adjustment knob
D. Saddle
E. Saddle-height adjustment knob
F. Rear stabiliser
G. Pedal
H. Front stabiliser
I. Main frame
J. Fan

Detailed parts list

No.	Description	Amount	No.	Description	Amount
01	Main frame	1	45	Bearing 6000Z	4
02	Console post	1	46	Flywheel ∅415×55	1
03	Left handrail arm	1	47	Axle sleeve	1
04	Right handrail arm	1	48	Flywheel right cover ∅490	1
05	Left handrail	1	49	Hex bolt M6×15	4
06	Right handrail	1	50	Belt pulley with crank ∅170	1
07	Left foot bar	1	51	Gear	1
08	Right foot bar	1	52	Axle Φ10×140	1
09	Front stabiliser ∅50	1	53	Belt PJ390/J5	1
10	Rear stabiliser ∅50	1	54	Bike chain	1
11	Left pedal	1	55	Hex flat nut 7/8"	1
12	Right pedal	1	56	Washer ∅35×2	1
13	Left cover	1	57	Puller bushing 15/16"	1
14	Right cover	1	58	Bearing Φ44,5	2
15	Saddle post	1	59	Bearing bush ∅55,6×16	2
16	Saddle	1	60	Puller bushing 7/8"	1
17	Flat washer∅8×∅16×1.5	7	61	Flat washer ∅40×2.8	1
18	Nylon nut M8	5	62	Chain pulley with crank ∅165	1
19	Console	1	63	Saddle-height adjustment knob M16	1
20	Extension sensor wire L=450mm	1	64	Saddle post plastic bushing 50×25×1.5	1
21	Wire plug ∅12	3	65	Main frame end cap	2
22	Cross pan head screw M5×10	2	66	Front stabiliser end cap ∅50	2
23	Hex bolt M8×30	2	67	Hex bolt M6×45	2
24	Handrail arm end cap ∅25	6	68	Movable wheel∅22×∅6.5×30.5	2
25	Handrail arm foam grip∅24×∅35×280	2	69	Bolt M10×56	4
26	Plastic bushing ∅32×1.5	2	70	Curve washer ∅10×∅20×2.0	4
27	Hex bolt M10×20	2	71	Cap nut M10	4
28	Spring washer∅19.5×∅11.5×2.5	2	72	Rear stabiliser end cap ∅50	2
29	Washer ∅28×∅16×δ5	2	73	Sensor L=350mm	1
30	Bushing ∅28×∅16×16	8	74	Cross pan head self-tapping screw ST2.9×9.5	2
31	Wave washer 22 × 17 × 0.3	2	75	Sensor wire L=500mm	1
32	Handrail armadjustable knob M8	2	76	Washer 24 × 13 × 4.0	2
33	Hex bolt M8×48	2	77	Bushing 16 × 13 × 14.5	2
34	Plug 32	2	78	Crank cover 60	2
35	Spacer bushing 18 × 14 × 8 × 10	4	79	Cross pan head tapping screwST4.2×20	6
36	Flange nut M10×P1.0	4	80	Cross countersunk head self-tapping screwST4.2×20	2
37	Eyebolt M6×36	4	81	Rotation rod	1
38	U-shape bracket	4	82	Left nylon nut	1
39	Spring washer 6	8	83	Right nylon nut	1
40	Nut M6	4	84	Cross pan head screw M5×10	5
41	Cross pan head screwM6×10	5	85	Nylon nut M5	5
42	Flywheel left cover 490	1	86	Nylon nut M6	6
43	Hex nut M10×P1×5	4	87	Flat washer 10 × 25 × 2.0	2
44	Circlip 10	4

Note:
the graphics in this manual are schematic representations and may not exactly match the device.

2. BEFORE USE

- This device is packaged in a way as to protect it during transport. Take the device out of its box and remove all packaging materials. You can keep the original box and other

packaging elements in a safe place. This will help you prevent damage to the device when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.

- Make sure all parts and components are included and in good conditions. If there is any piece missing or in bad conditions, contact the Official Cecotec Technical Support Service immediately.

3. PRODUCT ASSEMBLY

Step 1: Front and rear stabilisers installation

1. Attach the rear stabiliser (10) onto the main frame (1) with two M10 cap nuts (71), two 10×20×2.0 curve washers (70) and two M10×56 bolts (69). Tighten the assembly with the spanner provided.
2. Attach the front stabiliser (9) onto the main frame (1) with two M10 cap nuts (71), two 10×20×2.0 curve washers (70) and two M10×56 bolts (69). Tighten the assembly with the spanner provided. Fig. 2

Step 2: Left and right pedals, foot bars and handrail arms installation

1. Remove two M10×20 hex bolts (27), two spring washers ∅19.5×∅11.5×2.5 (28), two flat washers ∅10×∅25×2.0 (87), two ∅28×∅16×δ5 washers (29) and two wave washers ∅22×∅17×δ0.3 (31) from the rotation rod (81).
2. Insert the rotation rod (81) into the hole of the main frame (1). Attach two wave washers 22×17×δ0.3 (31) onto the rotation rod (81) and then attach the left and right handrails (5)(6) onto the rotation rod (81) using two washers 28×16×δ5 (29), two flat washers 10×25×2.0 (87), two spring washers 19.5×11.5×2.5 (28) and two hex bolts M10×20 (27). Tighten the assembly with the Allen key provided.
3. Remove the flat washer 5×9×0.8 (88), washer 24×13×4.0 (76), bushing 16×13×14.5 (77), cross countersunk head self-tapping screw ST4.2×20 (87) and right nylon nut (83) from the right pedal (12).
4. Attach the right pedal (12) to the right side of the crank (62) using a flat washer 5×9×0.8 (88), washer 24×13×4.0 (76), bushing 16×13×14.5 (77), right foot bar (8), cross countersunk self-tapping screw ST4.2×20 (87) and right nylon nut (83). Tighten the right pedal (12) by hand clockwise and screw the right nylon nut (83) counterclockwise using the Allen key and spanner provided.
5. Repeat the same procedure to attach the left pedal (11) onto the left side of the crank (62). Tighten the left pedal (11) by hand counterclockwise and screw the left nylon nut (82) clockwise using the Allen key and spanner provided.

ENGLISH

Note

Do not turn the left pedal clockwise to tighten it or it will damage the nuts.

1. Insert the right handrail arm (4) into the plastic bushing on the tube of the right handrail (6) and secure it using the handrail arm adjustable knob (32).
2. Repeat the same procedure to assemble the left handrail arm (3). Fig. 3

Step 3: Saddle post and saddle installation

1. Remove three flat washers 8×16×1.5 (17), three M8 nylon nuts (18) from under the saddle (16). Attach the saddle post (15) to the saddle (16) using three flat washers 8×16×1.5 (17) and three M8 nylon nuts (18). Tighten the assembly using the spanner with Philips screwdriver provided.
2. Insert the saddle post (15) into the saddle post plastic bushing on the main frame (1), then attach the M16 saddle-height adjustment knob (63) onto the tube of the main frame (1) by turning it clockwise to lock the saddle post (15) in the proper position. Fig. 4

Adjusting the height of the saddle

Turn the M12 saddle-height adjustment knob (63) counterclockwise to release the saddle post (15) and then slide the saddle post (15) slightly up or down to the desired hole to adjust the position. Secure the saddle post (15) in place by tightening the M12 saddle-height adjustment knob (63) clockwise.

Note

When adjusting the height of the saddle post, make sure that the plastic bushing does not exceed the mark line on the saddle post.

Step 4: Console installation

1. Connect the sensor wire (75) to the extension sensor wire (20).
2. Remove two flat washers 8×16×1.5 (17) and two M8×30 hex bolts (23) from the main frame (1).
3. Attach the console post (2) onto the main frame (1) with two flat washers 8×16×1.5 (17) and two M8×30 hex bolts (23). Tighten the assembly with the Allen key provided.
4. Connect the extension sensor wire (20) to the wire of the console (19).
5. Remove two M5×10 cross pan head screws (22) from the console (19).
6. Then attach the console (19) onto the upper end of the console post (2) with two M5×10 corss pan head screws (22) and tighten them with the spanner and Philips screwdriver provided. Fig. 5

4. INFORMATION ON EXERCISING

Warm-up and cool-down routine

Warm up

• Warm up is an essential part of any training session. The objective of warming up is to prepare the body for physical exercise and therefore minimise injuries.
• Warm up two to five minutes before doing exercise. Before starting each training session, it is advisable to prepare the body for more intense exercise by warming up and stretching the muscles, increasing circulation and pulse, and supplying more oxygen to the muscles.

Cool down

• It is also essential. To reduce stiffness, at the end of each workout, cool your body by repeating these exercises.
• The aim of cooling down is to return the body to its resting state at the end of each training session. Adequate cooling down slowly slows the heart rate and allows blood to return to the heart.

Warning

Ask your doctor before starting any type of exercise routine. This is especially important for those over the age of 35 or with pre-existing health problems. Read the instructions carefully before using any similar training equipment.

• Head roll Rotate your head to the right once, until you feel a slight pull on the left side of your neck.
• Then turn your head back once, extending your chin towards the ceiling and leaving your mouth open. Repeat the action by turning your head to the left once. Lastly, drop your head to your chest.

Shoulder lift

Lift the right shoulder towards the ear once. Next, raise the left shoulder while lowering the right one.

Side stretchOpen both arms to the side and gently lift them above your head. Stretch your right arm as far as you can towards the ceiling once. Repeat this action with your left arm.

Quadriceps stretching

With one hand resting on the wall for balance, grab your ankle and gently bring your heel towards your buttocks until you feel a tug on the front of your thigh. Bring the heel as close to the buttocks as possible. Hold for 15 seconds and repeat with the left foot.

ENGLISH

Inner thigh stretchingSit on the floor with the soles of your feet together and your knees pointing outwards. Bring your feet as close to your inner thighs as possible. Gently push the knees towards the ground. Hold for 15 seconds.

Toe touch

Slowly bend forward at the waist, letting your back and shoulders relax as you stretch your fingertips towards your toes. Stretch down as far as you can and hold the position for 15 seconds.

Hamstring stretching

Extend the right leg. Place the sole of the left foot against the inside of the right thigh. Stretch towards the toe as far as you can. Hold this position for 15 seconds. Relax and then repeat with the left leg.

Calf/Achilles tendon stretching

Lean against a wall with your right leg in front of your left leg and your arms in front of you. Keep your left leg stretched out and your right foot on the floor. Then, bend your right leg and lean forward, moving your hips towards the wall.

5. CLEANING AND MAINTENANCE

• To clean the air bike, simply wipe it off with a soft, damp cloth. Do not use abrasive cleaning agents or solvents to clean plastic parts. Wipe off any perspiration that may remain on the bike after each use. Be careful not to allow too much moisture to enter the console display, as this may create a risk of electric shock or cause failure of electrical components.
• Please keep the air bike, especially the console, away from direct sunlight to prevent damage to the display.
• Check weekly and before each use that all mounting bolts and the machine pedals are tightened securely.
• Store the air bike in a clean and dry place, out of the reach of children and pets.

6. TROUBLESHOOTING

PROBLEM	SOLUTION
The console does not turn on.	1. Remove the console from the bike and make sure that the cable coming out of it is correctly connected to the cable coming out of the handrail.2. Check that the batteries are inserted correctly and that the springs make contact with the batteries.3. The batteries of the console may be dead.4. Replace the batteries with new ones.
The bike wobbles during use.	Rotate the rear stabiliser end cap as necessary to level the bike.
The bike squeaks during use.	Bolts may be loose. Ensure that all bolts are in place and tighten if necessary.

7. TECHNICAL SPECIFICATIONS

Product reference: 07229

Air Bike Drumfit CrossFit 2000 Eolo

Maximum user weight: 110 kg.

HC Class

Size: 104 x 58.5 x 131.5 cm

Weight: 29.5 kg

Technical specifications may change without prior notification to improve product quality.

Made in China | Designed in Spain

8. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or batteries must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/batteries/accumulators and take them to a collection point designated by the local authorities.

Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.

Compliance with the above guidelines will help protecting the environment.

9. TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.

It is recommended that repairs be carried out by qualified personnel.

If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official Cecotec Technical Support Service at [phone].

10. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

1. PIÈCES ET COMPOSANTS

Img. 1

6. PROBLEEMOPLOSSING

Fig. / Img. / Rys. / Obr. 1

Tool:

Spanner S13-S17-S19
Fig. / Img. / Rys. / Obr. 2

Tool:

Fig. / Img. / Rys. / Obr. 3

Tool:

Fig. / Img. / Rys. / Obr. 4

Tool:

Fig. / Img. / Rys. / Obr. 5

www.cecotec.es