Ironhero 3200 I Pump - Iron CECOTEC - Free user manual and instructions

Brand	Cecotec
Model	Ironhero 3200 I Pump
Category	Iron
Product type	Steam iron with pump
Power	3200 W
Water tank capacity	400 ml
Soleplate	Ceramic soleplate
Steam function	Adjustable continuous steam
Steam flow rate	Up to 50 g/min
Vertical function	Yes, for vertical ironing
Anti-drip	Yes
Self-cleaning	Yes, auto-clean function
Auto shut-off	Yes (vertical and horizontal position)
Cable length	3 m
Maintenance	Regular cleaning with damp cloth, descaling recommended
Safety	Auto shut-off, removable tank, ergonomic handle
Spare parts	Available through Cecotec after-sales service
Repairability index	Repairability index not disclosed
General information	High-performance iron with pump for powerful and constant steam

Frequently Asked Questions - Ironhero 3200 I Pump CECOTEC

How to descale my Cecotec Ironhero 3200 I Pump iron?

Use the auto-clean function: fill the water tank, set steam to maximum, and press the auto-clean button until all water is expelled. Repeat if necessary.

What to do if steam stops coming out?

Check the water tank, make sure it is full. If the problem persists, run an auto-clean cycle to remove limescale deposits.

Can I use tap water?

Yes, but it is recommended to use a mixture of 50% tap water and 50% demineralized water to extend lifespan and avoid limescale.

How to clean the ceramic soleplate?

Let the iron cool down, then wipe the soleplate with a non-abrasive damp cloth. For stubborn residues, use a mixture of white vinegar and water.

Does the auto shut-off work?

Yes, the iron turns off automatically after 8 minutes in vertical position and after 30 seconds in horizontal position or if tipped over.

How to use the vertical steam function?

Fill the tank, select a high steam flow, hold the iron vertically and press the steam button. Ideal for removing wrinkles from hanging clothes or curtains.

Does the iron drip?

No, thanks to the anti-drip function, the iron does not let water leak when the temperature is too low.

What is the power of this iron?

The Cecotec Ironhero 3200 I Pump has a power of 3200 W, ensuring fast heating and powerful steam.

Where to find spare parts?

Contact Cecotec after-sales service via their official website or by phone. Parts such as the tank or soleplate are generally available.

Can I iron without steam?

Yes, you can turn off the steam and use the iron dry. Set the temperature according to the fabric and iron normally.

USER MANUAL Ironhero 3200 I Pump CECOTEC

Plancha horizontal con bomba/ Steam iron with pump

1. Parts and components 39
2. Before use 39
3. Operation 40
4. Cleaning and maintenance 43
5. Troubleshooting 44
6. Technical specifications 45
7. Disposal of old electrical and electronic appliances 45
8. Technical support and warranty 45
9. Copyright 46

SOMMAIRE

Read these instructions thoroughly before using the product. Keep this instruction manual for future reference or new users.

• Make sure that the mains voltage matches the voltage stated on the rating label of the appliance and that the wall outlet is grounded.
• Do not leave the iron unattended while hot, plugged in, or on an ironing board.
• Place the device on a flat, even, and heat-resistant surface.

- CAUTION: hot surface. Accessible surfaces may reach high temperatures during operation.

- Do not operate the appliance if it has been d, if it shows visible signs of damage, or if it leaks.

- Do not pull on the power cord when unplugging or moving the device, pull on the plug instead.

- Do not twist, bend, pull, or damage the power cord. Protect it from sharp edges and heat sources. Do not allow it to touch hot surfaces. Do not let the cord hang over the edge of the working surface or worktop.

- Do not immerse the cord, plug, or any non-removable part of the appliance in water or any other liquid, nor expose electrical connections to water. Make sure your hands are dry before handling the plug or switching on the appliance.

- Check the power cord regularly for visible damage. If the cord is damaged, it must be repaired by the official Technical Support Service of Cecotec to avoid any type of danger.

- Avoid contact with the steam generated by the iron. Steam temperature is very high and can cause burns and other damage.

- Disconnect the iron from the power supply when filling or emptying water, or when not in use.

• The water filling opening should not be open when you use the iron.
• Unplug the appliance immediately if fire or smoke is observed.
• Do not leave the appliance unattended while in use. Unplug it from the power supply when you finish using it and before leaving the room.
• The appliance must not be plugged in when filling or emptying the water tank.
• The tank cap must not be open when the appliance is switched on.
• This appliance is designed for domestic use only and is not intended for bars, restaurants, farmhouses, hotels, motels, and offices.
• This device is designed to iron fabrics. It is not suitable for commercial or industrial use. Do not use outdoors. Keeping the iron at maximum temperature for too long may cause discolouration, which will not affect the performance of the appliance.
• Do not try to repair the product by yourself. Contact the official Technical Support Service of Cecotec.
• To ensure the correct operation of the device, cleaning and maintenance tasks must be carried out according to this instruction manual. Turn off and unplug the appliance before moving and cleaning it. Allow it to completely cool down before cleaning or storing it.
• Store the appliance and its instruction manual in a safe and dry place when not in use. Cecotec takes no responsibility for any damage caused by misuse of the appliance. Any misuse or non-compliance with these instructions voids the warranty and Cecotec's liability.
• This appliance can be used by children aged 8 and above,

and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, as long as they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Cleaning and maintenance tasks should not be carried out by unsupervised children.

• Supervise children to prevent them from playing with the appliance. Close supervision is necessary when the appliance is being used by or near children.
• Keep this appliance and its power cord out of reach of children under the age of 8 when it is plugged in or cooling down.

Warning

• All our ironing range products have undergone quality control tests before their commercialisation. These tests consist of filling the water tank to check tightness and to ensure the correct operation of the device.
• Once the test has been carried out, the tank is emptied and dried, but there is a slight probability that water could remain inside it.

INSTRUCTIONS DE SÉCURITÉ

1. Water spraying nozzle
2. Water filling-opening cap
3. Steam burst button
4. Spray button
5. Pressure-generating pump button (I-Pump)
6. Touch sensor
7. Handle
8. Swivelling cord
9. Indicator
10. Water tank
11. Temperature knob
12. Auto-clean button
13. Soleplate

Please note

The graphics in this manual are schematic representations and may not exactly match the product.

2. BEFORE USE

• This appliance is packaged in a way as to protect it during transport. Take the device out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent product damage when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
• Make sure all parts and components are included and in good conditions. If any of them are missing or not in good condition, please contact Cecotec's official Technical Support Service immediately.

Note

You may notice a slight burning smell or smoke when using the appliance for the first time, caused by the excess of lubricants from the manufacturing process. Smoke will disappear after a short time.

• Make sure you have read and understood all instructions and warnings in this instruction manual. Pay particular attention to the safety instructions on previous pages.
• Place the appliance on an even, heat-resistant surface. Do not place the appliance near heat sources, places with high humidity levels, or combustible materials.

ENGLISH

- Plug the appliance into an appropriate wall outlet. The plug must have easy access, so that in case of an emergency, it can be easily unplugged.

3. OPERATION

Preparation

Sort the laundry according to the international symbols on the label of the different pieces of clothing, or the type of fabric.

Label	Type of fabric	Thermostat regulation
	Synthetic	Low temperature
	Silk - Wool	Medium temperature
[ZY0W]	Cotton - Linen	High temperature
[DSWH]	Do not iron

Start ironing the fabric that requires a lower temperature. This reduces waiting times (the iron takes less time to heat up than to cool down) and the risk of burning the fabric.

Filling the water tank

1. Unplug the iron before filling the water tank.
2. Rest the iron on its heel rest, tilt it forward approximately 45^ , and fill the water tank up to the MAX mark.
3. Tap water may be used. In case water is very hard, use distilled water. Do not use chemically descaled or scented water under any circumstance.

Note:

• Whenever you fill or empty the water tank, you must do so with the iron unplugged from the mains.
• Do not use additives or add other liquids such as perfume, vinegar, starch, condensed water from dryers or air conditioning systems, or chemicals, as this may damage the steam iron.
• This steam iron is designed to operate under running tap water. However, to ensure optimal performance for longer, you can mix tap water with distilled water in a 1:1 ratio. If water in your area is very hard, the mixture of tap water and distilled water should be in a 1:2 ratio.

Vertical steaming

1. Ensure there is enough water in the tank.

2. Place the steam iron in an upright position, rest it on its heel rest, and connect it to the power socket.

3. Select the maximum temperature mode.

4. Hold the iron vertically and press the steam burst button, an intense steam will be ejected from the soleplate.

Dry ironing

Set the temperature knob to the

. position.

Steam ironing

1. Unplug the iron and fill it with water.
2. Plug the power cord into the power supply.
3. Turn the temperature knob and select the desired type of fabric.
4. When the LED indicator changes, the iron will be ready to be used.
5. When finished, select MIN and unplug the appliance.

Warning

Make sure the LED indicator has changed. If you use the soleplate before that, it could leak since it has not reached the optimal temperature.

Warning

The iron will only produce constant steam when it is placed horizontally. To stop the continuous steam flow, place the iron in an upright position.

• The steam function can only be activated when the iron is operated at medium or high temperature.
• If the selected temperature is low, the iron's soleplate could leak.

Safe start up without heated soleplate

As a safety measure, when the iron is turned on, the soleplate does not generate heat.

Ironing synthetic clothes

Minimum temperature and no steam operation (70°C-120°C.)

Ironing wool/silk \*\*

Medium temperature and no steam operation (100°C-160°C.)

Ironing cotton/linen \*\*\*

High temperature and steam operation (140°C-200°C.)

Steam burst

By pressing the steam burst button, an intense burst of steam is emitted from the soleplate. This function can only be activated during high-temperature ironing.

ENGLISH

Warning:

• To prevent the soleplate from leaking, do not keep the steam burst button pressed for more than 5 seconds.
• For optimal steam burst, do not press the steam burst button more than three times in a row to prevent the iron from cooling.

Spraying

The spray function can be used with any temperature setting during the steam ironing or dry ironing mode, as long as the tank is full.

Touch sensor

The iron includes a touch sensor in its handle. For safety reasons, the iron will only emit continuous steam when held by the handle in a horizontal position.

Pressure-generating pump

Fig. 2

1. The iron features a pressure pump that generates maximum steam and removes the harshest creases.
2. To activate it, press the i-PUMP button once. This button is located at the top. During operation, the LED light will remain on, and a slight sound will be heard.
3. To deactivate it, press the button again and wait until the light turns off.

Self-cleaning

1. Make sure the appliance is unplugged.
2. Fill the water tank up to the maximum mark and close it (do not put vinegar or other treatment agents in the water tank.)
3. Select the maximum temperature mode.
4. Plug the device into a power supply.
5. Unplug the appliance when it reaches the temperature.
6. Hold the iron horizontally, turn the steam knob to the maximum position, press the self-cleaning button and shake the iron gently from one side to the other. Place a container or bowl beneath the iron.
7. The soleplate will emit boiling water and steam to remove all impurities.
8. Release the self-cleaning button once the water tank is empty.
9. Repeat this process if necessary.

After the self-cleaning process, plug the iron to a power socket and let it heat so the soleplate dries, unplug the iron when it has reached the established ironing temperature, move the hot iron softly over a piece of fabric to remove water stains which may have formed in the soleplate, then let the iron cool down before storing it.

Tip

Carry out the self-cleaning cycle once every 2 weeks. If water in your area is very hard (i.e., limescale appears on the soleplate during ironing), the self-cleaning function should be used more frequently.)

Auto shut-off function

• The iron will automatically turn off when it is placed and kept still horizontally for 30 seconds, or vertically for 8 minutes. The device will beep 6 times and the LED light indicator will flash to indicate the iron is off.
• To heat the iron up again:
• Pick up the iron or gently move it.

Anti-drip function

• This function automatically prevents water from spilling when the appliance is not hot enough.
• During use, the anti-drip system may emit a loud clicking sound, especially during preheating or whilst cooling down. This is perfectly normal and indicates that the system is operating correctly.

Anti-calc system

This system is designed to reduce the building up of limescale due to steam ironing.

4. CLEANING AND MAINTENANCE

• Turn off, unplug the appliance from the power supply, empty the water tank (do it after each use), and allow it to cool down completely.
• In case fabric is adhered to the soleplate due to heat, use a damp cloth and vinegar to detach it.
• Do not use abrasive cleaners or scouring pads to clean the product.
• If scale blocks the steam holes, use a toothpick to remove it.
• To protect the soleplate while it is stored, place the steam iron in an upright position on its heel rest.

Exterior iron surface

After unplugging and letting the iron cool down, wipe its exterior surface with a damp cloth and, if necessary, a mild detergent.

Warning

Do not use any abrasive cleaning agent.

ENGLISH

Soleplate

Starch and other types of residues may be easily removed from the soleplate with a damp cloth. Do not use nickel balls to clean the soleplate or place the iron on rough surfaces to avoid scratching the soleplate finish. If synthetic fabrics are ironed at high temperature, both the fabric and the soleplate of the iron could be damaged. The best way to remove synthetic residue from the soleplate is to heat it up and iron over an old cotton rag.

Warning

Do not use steam iron cleaners with this iron since they could damage its parts.

Storage

• Disconnect the iron from the mains supply.
• Empty the tank by turning the iron upside down and gently shaking it.
• Allow the iron to cool down completely.
• Wind the power cord around the base of the iron.
• Store the iron in a vertical position.

5. TROUBLESHOOTING

Problem	Possible cause	Solution
Not enough or too much heat.	The temperature knob is not set correctly, or it is unplugged.	Set the temperature knob to the correct position.
No steam or leakage.	The temperature knob is set to the MIN position.
Steam burst or vertical steaming function do not work properly.	The steam burst function has been used too often within a very short period. The iron is not hot enough.	Continue ironing in horizontal position and wait a few minutes before using the vertical steam burst function again.
Water leaks from the soleplate.	The temperature knob has been set to MIN.	Set the temperature knob correctly.
	The iron is not hot enough.	Wait until the red light indicator turns red.
	Water is over the max mark.	Empty the remaining water.
Little steam.	Steam holes are blocked.	Clean the hole with distilled water.
	Little or no water in tank.	Add water to tank.
Spray does not work properly.	Not enough pressure or air inside.	Press the spray nozzle manually and press the spray button several times in a row.

6. TECHNICAL SPECIFICATIONS

Product reference: 01874

Product: IronHero 3200 i-Pump

3200 W, 220-240 V, 50-60 Hz

Technical specifications may change without prior notification to improve product quality Made in China | Designed in Spain

7. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or cells must be disposed of separately from household waste.

When this product reaches the end of its shelf life, you should dispose of the batteries/accumulators and take them to a collection point designated by the local authorities.

Consumers must contact their local authorities or retailer for information

concerning the correct disposal of old appliances and/or their batteries.

Compliance with the above guidelines will help protecting the environment.

8. TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.

It is recommended that repairs be carried out by qualified personnel.

If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec official Technical Support Service at [phone].

ENGLISH

9. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

1. PIÈCES ET COMPOSANTS

Img. 1

5. PROBLEEMOPLOSSING