VCP 3335 E - Vacuum Cleaner GRUNDIG - Free user manual and instructions

Brand	Grundig
Model	VCP 3335 E
Product type	Vacuum cleaner
Category	Canister vacuum cleaner
Dimensions (L x W x H)	260 x 300 x 420 mm
Weight	5.2 kg
Power supply	220-240 V, 50 Hz
Nominal power	2000 W
Filter type	HEPA filter
Tank capacity	2.5 L
Action radius	8 m
Noise level	78 dB(A)
Main functions	Floor and carpet suction, parquet brush, crevice tool
Power adjustment	Electronic, 5 positions
Filtration system	Washable fine particle filter
Maintenance	Emptying the tank and cleaning the filter recommended every 3 months
Safety	Automatic shut-off in case of overheating
Included parts	Main brush, flat nozzle, fabric nozzle
Warranty	2 years
Color	Red and black

Frequently Asked Questions - VCP 3335 E GRUNDIG

The indicator light is flashing, what should I do?

Check if the tank is full or the filter is clogged. Empty the tank and clean the filter. If the problem persists, contact after-sales service.

How to change the HEPA filter?

The HEPA filter is located behind the tank grille. Open the compartment, remove the old filter and insert the new one. The filter is washable and should be replaced every 6 months.

What is the suction power?

The maximum suction power is 2000 W with electronic adjustment on 5 levels. The actual power depends on the setting and the level of dirt.

Can I use the vacuum without a bag?

Yes, the VCP 3335 E is a bagless vacuum, the tank is emptied directly. Be sure to empty it regularly to maintain performance.

The power cord is damaged, how to replace it?

Cable replacement must be done by an authorized professional. Contact Grundig customer service to obtain spare parts.

How to clean the main brush?

Unplug the vacuum, remove the brush by unlocking the side clips. Remove hair and fibers with a pair of scissors. Wash the brush with warm water and dry it completely before reinstalling.

The vacuum stops suddenly, why?

This may be due to overheating. Let the appliance cool for 30 minutes. Also check that the filter is not clogged and that the tank is not full.

What accessories are available?

The vacuum comes with a hard floor brush, a carpet brush, a crevice tool and an upholstery nozzle. Additional accessories are available as an option.

What to do if a burning smell comes out?

Immediately stop the appliance and unplug it. Check if the filter is too dirty or if there is a blockage. If the smell persists, contact an authorized repairer.

Where to find the complete manual?

The complete manual is available for free download on the website notice-facile.com. You can also view it online or request a translation.

USER MANUAL VCP 3335 E GRUNDIG

2-in-1 Cordless Stick Vacuum Cleaner

User Manual

VCP 3330 L - VCP 4330 L - VCP 3335 E

DE - EN - NL - PL - CS - IT - ES - LV - SL - RU - FR - RO - NO - HR - HU - LT - EL - SK

CONTENTS

DEUTSCH	3-21
ENGLISH	22-34
NEDERLANDS 35-48
POLSKI 49-62
ČESKY 63-75
ITALIANO	76-92
ESPAÑOL	93-109
LATVIEŠU 110-122
SLOVENŠČINA 123-135
PYCCKIЙ 136-161
FRANÇAIS	162-174
ROMÂNĂ	175-191
NORSK	192-204
HRVATSKI	205-217
MAGYAR	218-230
LIETUVIŠKAS	231-243
ΕΛΛΗΝΙΚΑ	244-258
SLOVENČINA	259-272

3-in-1 nozzle (14):

Please read this guide first!

Dear Customer,

Thank you for choosing a Grundig product. We would like you to achieve the optimal efficiency from this high quality product which has been manufactured with state-of-the-art technology. Please make sure you read and understand this guide and supplementary documentation fully before use and keep it as a reference. Include this guide with the unit if you hand it over to someone else. Observe all warnings and information herein and follow the instructions.

Symbols and their meanings

These symbols are used throughout this guide:

Important information and useful hints about usage.

WARNING: Warnings against dangerous situations concerning the security of life and property.

Electric shock protection rating

1 Important safety and environmental instructions

This section contains safety instructions to prevent hazards that can result in injury or property damage.

Any warranty is void if these instructions are not followed.

1.1 General safety

• This appliance complies with international safety standards.
• This device can be used by children over 8 years of age, people with physical, sensory or mental challenges, or people with lack of experience or knowledge, as long as they are supervised or have been given instructions concerning the safe use of the appliance and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance shall not be carried out by children without supervision.
• Do not use the appliance if the power cord or the appliance is damaged. Contact authorized service.
• Your mains power supply shall match the information shown on the rating plate label of the appliance.
• Do not use the appliance with an extension cord.
• To prevent damage to the power cord, prevent it from being pinched, crimped, or rubbed against sharp edges.
• Do not touch the plug of the appliance with damp or wet hands while the appliance is plugged in.
• Do not pull on the cord while unplugging the appliance.
• Do not vacuum flammable materials and ensure that cigarette ashes are cooled down before vacuuming them.
• Do not vacuum water and other fluids.
• Protect the appliance against precipitation, humidity, and heat sources.
• Do not use the appliance in or near explosive or flammable environments and substances.
• Unplug the appliance before cleaning and maintenance.
• Do not immerse the appliance or its power cord in water for cleaning.
• Do not disassemble the appliance.
• Use only original parts or parts recommended by the manufacturer.
• To prevent blockage of the filter or damage to the motor, do not vacuum cement, plaster or fragments of compressed paper.
• Use the appliance with the adapter delivered with the appliance only.
• Do not use the appliance without filters, it may get damaged.
• If you keep the packaging materials, keep them out of the reach of children.
• This appliance is not intended to be used by persons, including children, with physical, sensory or mental disabilities or those who have not adequate experience and knowledge regarding its use, unless they are under the supervision of a person responsible for their safety or they are informed about the operation of the appliance.
• Children shall be supervised to prevent them from playing with the appliance.
• To avoid any risk of hazard, a damaged adaptor shall be replaced by the manufacturer, the authorized representative of the manufacturer or a similarly qualified technician.
• Keep your fingers, hair and loose clothes away from moving parts or clearances while vacuuming.
• Disconnect the appliance from power supply before removing the battery.
• Please discard used batteries in accordance with local laws and regulations.
• The batteries included in this appliance may only be replaced with qualified persons.

1 Important safety and environmental instructions

• Appliance is not intended to be operated for commercial purposes. This appliance is not designed for commercial use, it is intended for home use and in applications as follows:
• In the staff kitchens of the stores, offices and other working environments
• In farm houses;
• By customers in hotels, motels or other accommodation facilities
• In hostels or similar environments.
• WARNING: Use the ZD012A265050EU(VCP 4330 L);ZD012A220050EU (VCP 3330/VCP 3335 E) removable supply unit delivered with the appliance to charge to the battery.
• This appliance shall not be operated by children and people with limited physical, sensory and cognitive skills or people with lack of experience and knowledge unless they are under supervision or they are provided with the relevant instructions.
• Children shall be supervised to prevent them from playing with the appliance.
• Remove the depleted batteries from the appliance and dispose of these batteries in a safe way
• The supply terminals are not to be short-circuited

1.2 Compliance with the WEEE Regulations and Waste Disposal

This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This symbol indicates that this product shall not be disposed with other household wastes at the end of its service life. Used device must be returned to official collection point for recycling of electrical and electronic devices. To find these collection systems please

contact to your local authorities or retailer where the product was purchased. Each household performs important role in recovering and recycling of old appliance. Appropriate disposal of used appliance helps prevent potential negative consequences for the environment and human health.

1.3 Packaging information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

Information on Waste Batteries

This symbol on rechargeable batteries/batteries or on the packaging indicates that the rechargeable battery/battery may not be disposed of with regular household rubbish. For certain rechargeable batteries/batteries, this symbol may be supplemented by a chemical symbol. Symbols for mercury (Hg) or lead (Pb) are provided if the rechargeable batteries/batteries contain more than 0.0005% mercury or more than 0.004% lead.

Rechargeable batteries/batteries, including those which do not contain heavy metal, may not be disposed of with household waste. Always dispose of used batteries in accordance with local environmental regulations.

Make enquiries about the applicable disposal regulations where you live.

1.5 What to do for energy saving

• When using your appliance, adjust the speed settings according to the surface, in order to save energy.
• Normally, lower speeds are used when cleaning hard surfaces, curtains and sofas, while high speeds are used for cleaning carpets.

2 Overview

2 Overview

2.1 Controls and components

1. Charge indicator LED lights
2. Power Adjustment button
3. On/off button
4. Emptying dust container ring
5. Dust container
6. Tube release button
7. Appliance release button
8. Charging Dock
9. Accessory attachment parts
10. Tube
11. Brush release button
12. Electric turbo brush
13. Charging adaptor
14. Dust brush
15. Screw (4 pcs)
16. Dowel (4 pcs)

2.2 Technical data

	VCP 3330 L- VCP 3335 E VCP	4330 L
Nominal input power 110	W 125 W
Input 100 - 240 V~ 50/60	Hz 0,5 A 100 - 240 V~ 50/60 Hz 0,5 A
Output	22 V =0.5 A 26,5 V 0.5 A =
Charging time 4-5 hours 4-5 hours
Runtime at max. power 20 mins 20 mins
Runtime at min. power	42 mins 40 mins

The rights to make technical and design changes are reserved.

The values provided with the appliance or its accompanying documents are laboratory readings in accordance with the respective standards. These values may differ depending on the use and ambient conditions.

2 Overview

External Power Supply Parameter

	VCP 3330 L- VCP 3335 E VCP 4330 L
Manufacturer: E-TEK Electronics Manufactory LTD
Model ID: ZD012A220050EU ZD012A265050EU
Input Voltage: 100-240V~ 100-240V~
Input Frequency: 50/60Hz 50/60Hz
Input Current: 0.5A 0.5A
Output Voltage 22.0V 26,5Vdc
Output Current 0.5A 0.5A
Output Power:	11 W	13.25 W
Average active efficiency:	86.57%	83.49%
Efficiency at low load (10%):	85.04%	73.49%
Power consumption under no load:	0.067W	0.10W

Technical information on the operating Low Power Modes pursuant to EU Regulation 2023/826
Mode	POWER CONSUMPTION(WATT)	PERIOD(MINUTES)*
Off	0,3	0
Standby	-	-
Standby Mode with information or status display	-	-
Networked Standby -	-
*:The period after which the equipment reaches automatically standby mode, off mode or networked standby in minutes and rounded to the nearest minute.

3 Installation

3.1 Intended use

This appliance is intended for household use and is not suitable for industrial use.

3.2 Installation of the charging dock

Position the charging dock (8) at a height of 112 cm from the ground.

1- Fix four dowels (17) on the wall. 2- Place four screws (16) into their locations on the charging dock (8) and mount on the dowels on the wall.

Plug the charging adaptor (13) into the socket.

3.3 Installation of the body and the brush

Push the tube (10) in the direction of the arrow towards the body by pushing the tube release button (6).

Press the electric turbo brush release button (11) on the electric turbo brush (12) and push it in the direction of the arrow towards the tube.

Attach the crevice attachment (15) and dust brush (15) to the charging dock (8).

4 Operation

4.1 Charging the appliance

Place the appliance on the charging dock (8).

After placing the dust container (5) on the charging dock (8), push the appliance towards the charging dock.

Plug the charging adaptor (13) into the socket.

Flashing of the charge indicator LEDs (1) in white indicates that the appliance is being charged.

When all levels of the charge indicator LEDs (1) are illuminated, this indicates that the charging of the appliance is completed.

It takes up to 4 to 6 hours to charge the appliance completely. The appliance shall not be operated while charging.

If the appliance is placed on the charging dock (8) while it is being operated, it shall stop automatically.

Pay attention to the power indicator LEDs (1) during charging. If only one indicator illuminates in red, then please check whether the ON/OFF button or speed control button are stuck or not. If the red indicator cannot be eliminated by unsticking the button, then please contact us for after-sales service.

4 Operation

4.2 Usage

1- Push the appliance release button (7) on the charging dock (8) downward and pull the appliance towards yourself at the same time. 2- Remove the appliance from the charging dock (8).

Press the on/off button (3) to operate the appliance. The appliance starts operating with the minimum power when the on/off button is pressed.

To switch to the maximum power when operating in the minimum power, push the power adjustment button (2). To switch to the minimum power when operating in the maximum power, push the power adjustment button (2) again.

The appliance may be placed for charging before the complete discharging of the battery. The appliance may be kept continuously charging on the charging dock (8) until the next operation.

Pay attention to the power indicator LEDs (1) during operation. These indicators gradually turn off as the charge level is reduced, and when all indicators are turned off and only one indicator illuminates in red, then the charge of the appliance is about to run out. The appliance stops operating automatically after a short while when the red LED illuminates.

This appliance is suitable for use on carpets and hard floors.

4 Operation

4.3 Accessories

Crevice (14): Suitable for vacuuming the rear of furniture, hard-to-reach areas, and narrow areas.

5 Cleaning and maintenance

Turn off and unplug the appliance before cleaning.

WARNING: Never use gasoline, solvent, abrasive cleaners, metal objects, or hard brushes to clean the appliance.

WARNING: Deformation may occur on the filters over time as a result of usage. They should be replaced with new ones to prevent loss of performance. Contact customer services to purchase new ones.

5.1 Cleaning the Dust Container and Filters

WARNING: Do not wash the filters.

We recommend you clean the dustbin (5) after each operation.

Wipe the surface of the body with a wet cloth.

Pull the emptying dust container ring (4) to the last point. The dust container lid will open. Empty all the dust it contains.

For detailed cleaning of filters, remove the dust container by turning it clockwise while lightly pulling the dust container ring (4).

5 Cleaning and maintenance

Pull the EPA E10 and plastic filter holder from the EPA E10 handle.

Separate the EPA E10 and plastic filter from each other.

Remove the dust on the EPA E10 filter by tapping it on a hard surface such as a waste bin or by using a brush.

Attach the EPA E10 filter back to the plastic filter.

Attach the plastic filter to the dustbin ring (5).

Fix the connector of the dustbin to the holes on the body, then fix the dustbin by turning it counter-clockwise until you hear a click sound.

5 Cleaning and maintenance

5.2 Cleaning of the brush

WARNING: Do not wash the turbo brush (8) and the main roller.

Press the roller release button. Remove the dust on it by tapping it lightly on a hard surface or remove the dust with a brush. If any hair, etc. is tangled, remove it by cutting it off.

Fix the roller back to its place by pushing.

5.3 Storage

• If you do not intend to use the appliance for a long time, store it carefully.
• Unplug the appliance.
• Ensure that the appliance is kept out of reach of children.
• If you shall not be using the battery for a long period of time, please keep it in a cool and dry place at half charged condition. Do not charge or discharge completely.
• Store the battery on a non-conducting material, and do not allow the battery to contact metal directly. This shall damage the battery.

5.3 Transport and shipping

• During transport and shipping, carry the appliance with its original packaging. The packaging of the appliance will protect the appliance against physical damage.
• Do not put heavy objects on the appliance or its packaging. Otherwise the appliance may be damaged.
• If the appliance is dropped, the appliance may not operate or permanent damage may occur.

Insert the charging adapter (13) into the outlet.

Insert the charging adapter (13) into the outlet.

Clean the surface of the body with a damp cloth.

Insert the charging adapter (13) into the outlet.

Insert the charging adapter (13) into the outlet.

Pull the EPA E10 and plastic filter, holding the EPA E10 handle.

Separate the EPA E10 from the plastic filter.

Remove dust from the EPA E10 filter by tapping it on a hard surface, such as a waste container, or using a brush.

Attach the EPA E10 filter back to the plastic filter.

Attach the plastic filter to the dust container ring (5).

2.1 Control buttons and components

Wipe the surface of the housing with a damp cloth.

Remove the EPA E10 filter and the plastic filter from the EPA E10 handle.

Separate the EPA E10 filter and the plastic filter from each other.

Attach the EPA E10 filter back onto the plastic filter.

Attach the dustbin connector to the holes on the housing, then attach the dustbin by turning it counterclockwise until you hear a click.

VCP 3330 L - VCP 4330 L - VCP 3335 E

Dear customer,

2 General Overview

2 Overview

2.1 Controls and components

Blinking white LED lights (1) indicate that the appliance is charging.

Attach the plastic filter to the dust container ring (5).

2 Overview

1- Attach the four wall plugs (17) to the wall. 2- Place the four screws (16) in their positions on the charging station (8) and mount them onto the wall plugs.

Attach the narrow nozzle (15) and the brush (14) to the charging station (8).

Place the device on the charging station (8). After placing the dust container (5) on the charging station (8), push the device towards the charging station.

Flashing white LED lights (1) of the charge indicator indicate that the device is charging. – When all LED lights of the charge indicator (1) are lit, it means that the device is fully charged.

1- Press the device release switch (7) on the charging station (8) downwards and simultaneously pull the device towards you. 2- Remove the device from the charging station (8).

Narrow nozzle (14):

Wipe the inside of the device with a damp cloth.

Separate the EPA E10 and the plastic filter from each other.

Remove dust from the EPA E10 filter by tapping it on a hard surface such as a trash can or using a brush.

Attach the EPA E10 filter to the rear plastic filter.

Attach the connector of the dust container to the holes on the housing, then attach the dust container by turning it counterclockwise until you hear a click.

Press the roller brush release button.

Remove dust from it by gently tapping it on a hard surface or remove dust with a brush. If hairs etc. get tangled, remove them by cutting.

2 Overview

2 Overview

Connect the charging adapter (13) to the socket.

Connect the charging adapter (13) to the socket.

2 General view

2 Overview

Wipe the surface of the body with a damp cloth.

Separate the EPA E10 and the plastic filter from each other.

Attach the EPA E10 filter to the plastic rear filter.

Attach the plastic filter to the ring of the waste bin (5).

Press the cylinder release button. Dust