CVS 601X - Loudspeaker TANNOY - Free user manual and instructions

Product Type	Ceiling Mount Speaker
Model	CVS 601X
Brand	Tannoy
Driver Size	6.5 inches (165 mm) Dual Concentric
Power Handling (Continuous)	60 W
Power Handling (Peak)	240 W
Impedance	8 ohms (nominal)
Transformer Taps (70V/100V)	60 W, 30 W, 15 W, 7.5 W (and low impedance bypass)
Sensitivity	90 dB (1 W @ 1 m)
Frequency Response	70 Hz – 20 kHz (-10 dB)
Cutout Diameter	232 mm (9.1 in)
Overall Depth	180 mm (7.1 in)
Weight	4.5 kg (9.9 lbs)
Material (Baffle)	ABS plastic, painted
Grille	Perforated steel, white (paintable)
Mounting Type	Ceiling (with dog-leg clamps)
Safety Certifications	CE, UL 1480, UL 2043
Environmental Rating	Indoor (UL 2043 plenum rated)
Cleaning	Wipe with a soft dry cloth; do not use solvents
Spare Parts & Repair	Contact authorized Tannoy dealer; no user-serviceable parts inside
Warranty	5 years (subject to terms)

Frequently Asked Questions - CVS 601X TANNOY

What is the recommended amplifier power for the CVS 601X?

The speaker handles 60 W continuous (240 W peak). Use an amplifier that delivers 60–120 W RMS per channel at 8 ohms for optimal performance.

Can the CVS 601X be used in 70V or 100V systems?

Yes, it has a built-in transformer with selectable taps (60 W, 30 W, 15 W, 7.5 W) plus a low-impedance bypass setting. Adjust via the rotary switch on the front.

What are the dimensions for the ceiling cutout?

The required cutout diameter is 232 mm (9.1 inches). Ensure sufficient depth of at least 180 mm (7.1 inches) for the speaker body.

Is the CVS 601X suitable for outdoor use?

No, it is rated for indoor use only. It is plenum-rated (UL 2043) for air-handling spaces but not weatherproof.

How do I wire the speaker for 70V operation?

Set the rotary switch to the desired tap (e.g., 30 W). Connect the amplifier’s 70V output to the speaker’s input terminals. For low impedance, set switch to '8 Ω' and connect directly.

What is the frequency response of the CVS 601X?

It reproduces frequencies from 70 Hz to 20 kHz (-10 dB). For deeper bass, consider adding a subwoofer.

Can I paint the grille to match my ceiling?

Yes, the grille is paintable. Remove the grille (magnetic attachment) and spray with a thin coat of latex paint. Do not clog the perforations.

What tools are needed for installation?

You need a template (included), hole saw (232 mm), screwdriver, wire strippers, and a ladder. The speaker uses dog-leg clamps that tighten by turning screws.

Does the CVS 601X have overload protection?

Yes, it features a self-resetting polyswitch (PTC) that protects the driver from sustained overload. It will reset automatically when the condition is removed.

Where are spare parts available?

Spare parts (grille, transformer module, screws) can be ordered through authorized Tannoy dealers. Driver replacement should be done by a qualified technician.

USER MANUAL CVS 601X TANNOY

Row of five modern speaker speakers with white foam covers, arranged in a row (no visible text or labels)

EN

ES

FR

DE

PT

IT

NL

SE

PL

JP

CN

CVS-X Series

CVS 301X / CVS 301X-BK

3" In-Ceiling Loudspeaker for Installation Applications

CVS 401X / CVS 401X-BK

4" Coaxial In-Ceiling Loudspeaker for Installation Applications

CVS 601X / CVS 601X-BK

6.5" Coaxial In-Ceiling Loudspeaker for Installation Applications

CVS 801X / CVS 801X-BK

8" Coaxial In-Ceiling Loudspeaker for Installation Applications

CVS 801SX

8" In-Ceiling Subwoofer Loudspeaker for Installation Applications

CVS 801SX LZ

8" In-Ceiling Subwoofer Loudspeaker for

Installation Applications - Low Impedance Operation Only

2 CVS-X Series Quick Start Guide 3

EN

ES

FR

Important Safety Instructions

Terminals marked with this symbol carry electrical current of sufficient magnitude to contribute risk of electric shock. Use only high-quality professional speaker cables with 16" TS or twist-locking plugs pre installed. All other installation or modification should be performed only by qualified personnel.

This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock.

This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.

Caution To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel.

Caution To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Caution These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

Warning Please refer to the information on the exterior of bottom enclosure for electrical and safety information before installing or operating the device.

1. Please read and follow all instructions and warnings.

2. Keep the apparatus away from water (except for outdoor products).

3. Clean only with dry clodi.

4. Do not block ventilation openings. Do not install in a confined space. Install only according to manufacturer's instructions.

5. Protect the power cord from damage, particularly at plugs and appliance socket.

6. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.

7. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other (only for USA and Canada). A grounding-type plug has two blades and a third grounding piping. The wide blade or the third piping are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

8. Protect the power cord from damage, particularly at plugs and appliance socket.

9. Use only attachments and accessories recommended by the manufacturer.

1. Use only specified cars, stands, tripods, brackets, or tables. Use caution to prevent tip over when mixing the car/ apparatus combination.
2. Unplug during storms, or if not in use for

along period.

1. Only use qualified personnel for servicing, especially after damage.

2. The apparatus with protective earthing terminal shall be connected to a M/NS socket outlet with a protective earthing connection.

3. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

4. Avoid installing in confined spaces like bookcases.

5. Do not place naked flame sources, such as lighted candles, on the apparatus.

6. Operating temperature range 5° to 45°C (41° to 113°).

LEGAL DISCLAIMER

Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners, Milan, Kork Teknik, Lab Gruppen, Laiz, Iamney, Turbosound, TC Electronic, TC Helicon, Bachinger, Bugara, Aston Microphones and Coolaudio are trademarks or registered trademarks of Music Tribe Global Branch Ltd. © Music Tribe Global Branch Ltd. 2024 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe's Limited Warranty, please see complete details online at community.musictribe.com/support.

ES

1. Protocols and elimination methods

BESCHRÄNKTE GARANTIE

6 CVS-X Series Quick Start Guice 7

Thank you for purchasing this Tannoy Ceiling loudspeaker. This product range is suited for high-level music and speech reinforcement applications requiring exceptional sonic quality with uncompromised reliability.

The loudspeakers in this series are for indoor dry use.

Unpacking

Every Tannoy product and accessory is carefully inspected before packing. After unpacking, please inspect your product to make sure no damage has occurred in transit. In the unlikely event of any damage, would you please notify your dealer immediately and retain your shipping carton, as your dealer may ask you to return the faulty unit to them for inspection.

Each CVS-X loudspeaker is packed in pairs and provided with the following accessories as standard; C-Hing, tile-bridge kit, cut-out template, and paint mask. A plaster (mud) ring, 48" tile rail is also available as an optional extra.

Safety Notices

Some regional construction codes require the use of a secondary method of securing loudspeakers in ceiling to provide security of a backup support. A secondary support line should be attached from the safety loop on the rear of the product to a source point on the ceiling. Please consult the relevant construction codes in your region.

When using a power driver to install the product it is essential to use the correct torque level settings to avoid over tightening and damage to the ceiling material or damps.

Recommended torque setting: 1.5 Nm.

Tannoy will not be held responsible for any damages caused by the improper installation of these loudspeakers.

SNECTYHOTT

The number of lines for the following line was 10,173,198. In terms of the line of the line that the line is not in the last row, one was then on the right side of the leading position. The line was ordered by a series with the line being up to 240,000,000 and the line being down to 150,000,000.

ES

Introducción

Thank you for purchasing this Tannoy Ceiling loudspeaker. This product range is suited for high-level music and speech reinforcement applications requiring exceptional sonic quality with uncompromised reliability.

The loudspeakers in this series are for indoor dry use.

Unpacking

Every Tannoy product and accessory is carefully inspected before packing. After unpacking, please inspect your product to make sure no damage has occurred in transit. In the unlikely event of any damage, would you please notify your dealer immediately and retain your shipping carton, as your dealer may ask you to return the faulty unit to them for inspection.

Each CVS-X loudspeaker is packed in pairs and provided with the following accessories as standard: C Ring, tile-bridge kit, cut-out template, and paint mask. A plaster (mad) ring, 48" tile rail is also available as an optional extra.

Safety Notices

Some regional construction codes require the use of a secondary method of securing loudspeakers in ceiling to provide security of a backup support. A secondary support line should be attached from the safety loop on the rear of the product to a source point on the ceiling. Please consult the relevant construction codes in your region.

When using a power driver to install the product it is essential to use the correct torque level settings to avoid over tightening and damage to the ceiling material or clamps.

Recommended torque setting: 1.5 Nm.

Tannoy will not be held responsible for any damages caused by the improper installation of these loudspeakers.

制图

The company and the board of directors are subject to 2018-2020, as well as the company's board of directors and its directors are subject to 2017-2019. The board of directors and its directors are subject to 2016-2018, as well as the board of directors and its directors are subject to 2015-2017.

12 CVS-X Series Quick Start Guice 13

PT

Introdução

The following table provides the results of the results from the study of the 2013 and 2014 studies, including the effect of the effect on the number of participants in each study. The results are presented in Table 1. The results were obtained by the authors and included in Table 2. The results were obtained by the authors and included in Table 3.

NL

Invoering

The following text contains the highest frequency of the ^1 to ^2 class. The first class is a group of classes, and the second class is a group of classes, which may be used to use the same number of classes in each class. Each class is a class with a few classes, but the first class has a few classes, and the second class has a few classes, which may be used to use the same number of classes in each class.

5C

Introduktion

In the case of the case of the case, we have been a result that is not to be a result in the case. In the case of the case of the case, we have been a result that is not to be a result in the case.

[PI]

Wprowadzenie

We have a large number of people who are being employed in the U.S. (2014), and we have a large number of people who are being employed in the U.S. (2015).

JP

前書き

Side view of a cylindrical container with internal components (no text or symbols)

Auxiliary support ring is not shown

Quick Star Guide

Accessories

Standard Accessories

Optional Accessories

Installation Guide for Suspended Ceilings

NOTE: The speaker images shown are for guidance only, and may not exactly represent your particular model.

1. Remove the ceiling tile from its frame and place it on a flat surface. Mark the cut-out area on the ceiling tile by tracing around the template provided. (Fig.1)
2. Cut out the hole in the ceiling tile using a circular saw or pad saw (Fig.2). Place the C-ring and tile-bridge on top of the ceiling panel, aligning the C-ring over the hole, and screw the C-ring to the tile bridge using the fixings provided. (Fig.3)
3. Slide the speaker assembly through the hole and turn the screws on the front of the speaker to extend the mounting wings. Tighten the screws until a firm grip is achieved. If using a power driver, Tannoy recommends a torque setting of 1.5 Nm. (Fig.4) DO NOT OVERTIGHTENI
4. Slide the tile panel back into the suspended ceiling. The tile bridge ends will catch over the railings, supporting the weight of the speaker. (Fig.5)
5. Connect a secondary support line to the safety tax. Some construction codes require use of this secondary support point, which should connect to a separate secure support point using a suitable support line. Consult construction codes in your region. Go to page 15 for instructions on string and set-up instructions.

Installation Guide for Drywall Ceilings

NOTE: The speaker images shown are for guidance only, and may not exactly represent your particular model.

1. Mark the cut-out area on the ceiling by trading around the template provided. (Fig.1)
2. Cut out the hole in the ceiling using a pad saw, then slide the C-ring into the ceiling, aligning it over the cut-out hole. (Fig.2)
3. Go to page 15 for wiring and set-up instructions then return to point 4 below.
4. Connect a secondary support line to the safety tab. Some construction codes require use of this secondary support point, which should connect to a separate secure support point using a suitable support line. Consult construction codes in your region.
5. Slide the speaker assembly through the hole and turn the screws to extend the mounting wings. Tighten the screws until a firm grip is achieved. If using a power driver, Tanney recommends a torque setting of 1.5 km. (Fig.3) DO NOT OVERTIGHTEN!
6. Insert grille by pushing it onto the speaker.

Quick Star Guide

Installation Instructions for Optional Plaster Ring

An optional plaster (mud) ring bracket is available from Tannoy. This bracket is designed to be pre-installed into newly constructed, non-suspended ceilings.

NOTE: The speaker images shown are for guidance only, and may not exactly represent your particular model.

1. Hall or screw the plaster ring to the joints. (Fig.1)

2. Lay the speaker wiring to where the speaker will be fitted and complete the plastering work on the ceiling.

3. Cut out the hole in the ceiling using a pad saw. (Fig.2)

4. Go to page 15 for instructions on wiring then return to point 5 below.

5. Connect a secondary support line to the safety tab. Some construction codes require use of this secondary support point, which should connect to a separate secure support point using a suitable support line. Consult construction codes in your region.

6. Side the speaker assembly through the hole and turn the screws to extend the mounting wings. Tighton the screws until a firm grip is achieved. If using a power driver, Tannoy recommends a torque setting of 1.5 Nm. (Fig.3) DO NOT OVERTIGHTEN!

7. Insert grille by pushing it onto the speaker. (Fig.4)

Quick Star Guide

Wiring and Setting Up

NOTE: The speaker images shown are for guidance only, and may not exactly represent your particular model.

We recommend the use of insulated speaker wiring of between 12 and 18 AWG.

WARNING: The power to the amplifier must be turned OFF when making connections to the loudspeakers. All connections must be checked before turning the amplifiers.

1. Remove the wiring cover at the back of the speaker can to access the removable Euro-type connector plug and socket.
2. The speakers come with a standard speaker cable clamp (Fig.1), and an optional gland for EN5424 applications (Fig.2). (Please note that EN5424 does not cover the CVS 801SX and CVS 801SX L2 subwoofers.)

1. Feed the cable through and attach to the Euro-type connector (Fig. 3).

1. For connection to an amplifier, use Pins 1 and 2 (Figs.3, 4, 5):

• Make sure that the wiring polarity is correct, where:
• Pin 1 is positive
• Pin 2 is negative

For connection to additional speakers in a distributed line (Fig.4)

Pins 3 and 4 are used to keep thru to additional speakers:

• Make sure that the wiring polarity is correct, where:
• Pin 3 is positive
• Pin 4 is negative

CVS-X Series

1. Tighten the cable clamp or cable gland and plug in the Euro-type connector to the loudspeaker. Replace the rear cover and securely tighten the supplied screws.
2. The speaker is fitted with a multi-tap transformer for use in distributed-line systems (Fig. 6). There is also a LOZ tap. Select the required tap before pushing the grill in place. The average impedance of each speaker in this range is 8 Ohms in the LOZ setting.

CAUTION: THE SPEAKER IS SUPPLIED IN LOW IMPEDANCE MODE. NEVER CONNECT THE SPEAKER TO A 70/100 VOLT AMPLIFIER WHILE THE SPEAKER IS SET FOR LOW IMPEDANCE (LOZ).

CVS 301X CVS 401X CVS 601X CVS 801X CVS 801SX

Fig.6 Speaker Tap Selector Switches

Performance
Frequency response (1 Hz, 3 dB)	85 Hz-19 kHz 102 Hz-20 kHz 105 Hz-20 kHz 85 Hz-20 kHz 66 Hz-200 Hz 65 Hz-200 Hz
Frequency response (10 dB)	68 Hz-20 kHz	70 Hz-20 kHz	74 Hz-20 kHz	65 Hz-20 kHz	53 Hz-200 Hz	53 Hz-200 Hz
Sensitivity at 1 Hz/1W	85 dB	84 dB	90 dB	90 dB	92 dB	92 dB
Directivity factor (3) averaged 1 kHz to 6 kHz	4.1	5.4	7.3	10.2	N/A	N/A
Directivity index (3) averaged 1 kHz to 6 kHz	6.1	7.3	8.6	10.1	N/A	N/A
Power handling (LoQ)
*1 Average	20 W	30 W	50 W	90 W	100 W	100 W
Programme	40 W	60 W	100 W	380 W	200 W	200 W
Peak	30 W	120 W	200 W	360 W	420 W	480 W
Recommended amplifier power	40 W @ 8.0	60 W @ 8.0	100 W @ 8.0	180 W @ 8.0	200 W @ 8.0	200 W @ 8.0
Nominal Importance (Switch to LoQ)	8.0	8.0	8.0	8.0	8.0	8.0
Rated maximum SPI (1 m, Switch to LoQ)	101 dB	103 dB	110 dB	113 dB	115 dB	115 dB
Average	98 dB	99 dB	107 dB	110 dB	112 dB	112 dB
Peak SPI	104 dB	105 dB	113 dB	116 dB	118 dB	118 dB
Transformer taps	15 W/7.5 W/5.8 W/1.0 W	25 W/7.5 W/6.3 W/5.2 W	30 W/15 W/7.5 W/13.8 W	50 W/30 W/15 W/7.5 W	80 W/40 W/25 W/10 W	N/A
100 V	15 W/7.5 W/13.8 W	25 W/7.5 W/6.3 W	30 W/15 W/7.5 W	60 W/30 W/15 W	80 W/40 W/20 W	N/A

Coverage angle
500 Hz	180°	180°	180°	180°	9/4	9/4
1Hz	Horizontal: 133°Vertical: 110°	Horizontal: 125°Vertical: 118°	Horizontal: 124°Vertical: 124°	Horizontal: 106°Vertical: 118°	N/A	N/A
2Hz	Horizontal: 79°Vertical: 82°	Horizontal: 82°Vertical: 80°	Horizontal: 80°Vertical: 80°	Horizontal: 124°Vertical: 100°	N/A	N/A
4Hz	Horizontal: 153°Vertical: 166°	Horizontal: 88°Vertical: 86°	Horizontal: 76°Vertical: 92°	Horizontal: 63°Vertical: 66°	N/A	N/A
Transducers
Low frequency	76 mm (5") PP cone	102 mm (4") PP cone	165 mm (5.5") PP cone	220 mm (5") PP cone	220 mm (5") Paper cone	200 mm (8") Paper cone
High frequency	N/A	20 mm (0.79")cosically mounted	20 mm (0.75")cosically mounted	25 mm (3")cosically mounted	N/A	N/A

Physical
Enclosure	Blind mount (BM)	Blind mount (BM)	Blind mount (BM)	Blind mount (BM)	Blind mount (BM)	Blind mount (BM)
Back car	Annotated steel	Annotated steel	Annotated steel	Annotated steel	Annotated steel	Annotated steel
Bruffle	Reflex loadedUL 940 Oated ABS	Reflex loadedUL 940 Oated ABS	Reflex loadedUL 940 Oated ABS	Reflex loadedUL 940 Oated ABS	Reflex loadedUL 940 Draces ABS	Reflex loadedUL 940 Oated ABS
Cable	Aluminum,powder coated	Aluminum,powder coated	Aluminum,powder coated	Aluminum,powder coated	Aluminum,powder coated	Aluminum,powder coated
Safety features	Rear enclosure safety ring for load-bearing band	Rear enclosure safety ring for load-bearing band	Rear enclosure safety ring for load-bearing band	Rear enclosure safety ring for load-bearing band	Rear enclosure safety ring for load-bearing band	Rear enclosure safety ring for load-bearing band
Clamping design	Security toggle clamp	Security toggle clamp	Security toggle clamp	Security toggle clamp	Security toggle clamp	Security toggle clamp
Connectors	Euroblock-style connector with screw terminals(with input cover and cable gland supplied)	Euroblock-style connector with screw terminals(with input cover and cable gland supplied)	Euroblock-style connector with screw terminals(with input cover and cable gland supplied)	Euroblock-style connector with screw terminals(with input cover and cable gland supplied)	Euroblock-style connector with screw terminals(with input cover and cable gland supplied)	Euroblock-style connector with screw terminals(with input cover and cable gland supplied)

CVS 301X CVS 401X CVS 601X CVS 801X CVS 801SX CVS 801SX L2

Dimensions
Bezel diameter(pH: max diameter)	200 mm (8")	200 mm (8")	254 mm (16")	305 mm (12")	305 mm (12")	305 mm (12")
Rear face of sfrle to rear of back seat	130 mm (5.37")	150 mm (5.91")	200 mm (8.19")	212 mm (8.35")	292.50 mm (11.57")	292.50 mm (11.57")
Rear face of sfrle to top of safety loop	145 mm (5.63")	161 mm (5.42")	221 mm (8.70")	225 mm (8.06")	305.5 mm (12.03")	305.5 mm (12.03")
Rear face of sfrle to rear of free canal	153 mm (6.10")	175 mm (6.08")	231 mm (9.17")	237 mm (9.33")	317.5 mm (12.5")	317.5 mm (12.5")
Hole cutout diameter	φ 172 mm (6.77")	φ 172 mm (6.77")	φ 212 mm (9.34")	φ 273 mm (10.25")	φ 373 mm (10.25")	φ 373 mm (10.25")
Net weight	2.1 kg (5.10 lb) ± 10%	2.7 kg (6.09 lb) ± 10%	3.8 kg (8.36 lb) ± 10%	5.35 kg (11.77 lb) ± 10%	7.59 kg (17.35 lb) ± 10%	7 kg (15.4 lb) ± 10%
Included accessories	Metal grille, cable gland, free conduit, C ring, the bridge kit, paint mask, colour template	Metal grille, cable gland, free conduit, C ring, the bridge kit, paint mask, colour template	Metal grille, cable gland, free conduit, C ring, the bridge kit, paint mask, colour template	Metal grille, cable gland, free conduit, C ring, the bridge kit, paint mask, colour template	Metal grille, cable gland, free conduit, C ring, the bridge kit, paint mask, colour template	Metal grille, cable gland, free conduit, C-ring, the bridge kit, paint mask, colour template
Optional accessories(not evaluated by UL)	Mud ring48" The roll	Mud ring48" The roll	Mud ring48" The roll	Mud ring48" The roll	Mud ring48" The roll	Mud ring48" The roll
Packed quantity	1 pair	1 pair	1 pair	1 pair	1 pair	1 pair

^1 Average power rating is under IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously.

EN

规格

Other important information

Important information

Informations importantes

CoC No.1438-CPB-0658

DoP No. CPR-CVSEN64-02

EN 54 24-2008

Loudspeaker for voice alarm systems for fire detection and fire alarm systems for buildings CVS 301X, CVS 301X-BK, CVS 401X, CVS 401X-BK, CVS 601X, CVS 601X-BK, CVS 801X, CVS 801X-BK

Type 1

Hereby, Music Tribe declares that this product is in compliance with Regulation (EU) No 305/2011, Regulation 519/2012 REACH SWHC and Directive 1907/2005/EC, and this passive product is not applicable to EMC Directive 2014/30/FU, LV Directive 2014/35/FU.

Full text of EU DoC is available at https://community.musictribe.com/

1. Representative Music Tribe Brands DK A29

Address: Gammel Strand 44, DK-1202 Kabenhavn K. Denmark

UK Representative: Music Tribe Brands UK Ltd.

Address: 8th Floor, 20 Fartington Street London EC4A 44B, United Kingdom

Correct disposal of this product: This symbol indicates that this product must not be disposal of with household waste, according to the WICE Directive (2012/19/EE) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same

time, your aspiration in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.