QFlex 40-WP - Loudspeaker TANNOY - Free user manual and instructions
Find the device manual for free QFlex 40-WP TANNOY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Line array loudspeaker |
| Brand | Tannoy |
| Model | QFlex 40-WP |
| Weatherproof Rating | IP54 (splash and dust resistant) |
| Power Handling (RMS) | 40 W |
| Impedance | 8 ohms (nominal) |
| Frequency Response | 80 Hz - 20 kHz (-10 dB) |
| Sensitivity (1W/1m) | 90 dB SPL |
| Maximum SPL | 106 dB SPL (peak) |
| Coverage Pattern | 120° horizontal x 60° vertical |
| Drivers | 4 x 3.5" full-range drivers |
| Dimensions (H x W x D) | 600 mm x 100 mm x 150 mm |
| Weight | 4.5 kg |
| Enclosure Material | Aluminum with powder coating |
| Mounting Options | Wall bracket or suspension rigging |
| Input Connector | 4-pin Euroblock (input & link) |
| Power Consumption | 40 W (peak) |
| Operating Temperature | -10°C to 50°C |
| Recommended Amplifier | Tannoy compatible amplifier or any stable 8 ohm load |
| Maintenance | Wipe with a soft dry cloth; do not use solvents |
| Safety | Ensure secure mounting to prevent falling; follow local regulations |
| Spare Parts & Repairability | Parts available through Tannoy service centers; user-serviceable parts: none |
Frequently Asked Questions - QFlex 40-WP TANNOY
What is the weatherproof rating of the Tannoy QFlex 40-WP?
The QFlex 40-WP has an IP54 rating, meaning it is protected against dust ingress and splashing water from any direction.
Can I connect multiple QFlex 40-WP speakers together?
Yes, the speaker features a link output (via the Euroblock connector) to daisy-chain multiple units. Ensure the total impedance remains within the amplifier's capability.
What is the recommended amplifier power for the QFlex 40-WP?
An amplifier delivering 40W to 80W RMS into 8 ohms is suitable. Higher power is acceptable as long as the speaker is not overdriven.
How do I mount the QFlex 40-WP?
The speaker can be mounted using the included wall bracket or optional suspension rigging. Always follow the installation guide and ensure the structure supports the weight.
What is the coverage angle of the QFlex 40-WP?
It provides a 120° horizontal x 60° vertical coverage pattern, suitable for even sound distribution in medium-sized rooms.
Can the QFlex 40-WP be used outdoors?
Yes, the IP54 rating makes it suitable for protected outdoor use (e.g., under eaves or in covered patios). Avoid direct exposure to heavy rain or submersion.
What type of cable connector does the QFlex 40-WP use?
It uses a 4-pin Euroblock connector for both input and link connections. Use twisted-pair speaker cable (e.g., 2x1.5mm²).
How do I clean the QFlex 40-WP?
Wipe the enclosure with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water. Do not use abrasive cleaners or solvents.
Is the QFlex 40-WP compatible with 70V/100V line systems?
No, this model is a low-impedance (8 ohm) speaker. For distributed audio systems, use the QFlex 40-WP with a standard amplifier and proper impedance matching.
Where can I find spare parts for my QFlex 40-WP?
Spare parts are available through Tannoy authorized service centers. Contact Tannoy support or visit their website for a list of service providers.
User questions about QFlex 40-WP TANNOY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual QFlex 40-WP - TANNOY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. QFlex 40-WP by TANNOY.
USER MANUAL QFlex 40-WP TANNOY
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TANNOY
Model : QFlex 40-WP
Category : Loudspeaker