TS2.8 - Loudspeaker TANNOY - Free user manual and instructions

Product Type	Active Subwoofer
Brand	Tannoy
Model	TS2.8
Frequency Response	28 Hz - 120 Hz
Amplifier Power	800 W (peak)
Driver Size	15 inch (381 mm)
Impedance	4 ohms
Maximum SPL	118 dB
Crossover Frequency	Variable 40-120 Hz
Inputs	Line-level RCA, Speaker-level
Dimensions (H x W x D)	450 x 400 x 450 mm
Weight	24 kg
Finish	Black Ash Wood Veneer
Power Requirements	110-240 V, 50-60 Hz
Standby Power Consumption	< 0.5 W
Maintenance	Wipe with dry, soft cloth. Do not use abrasive cleaners.
Safety Precautions	Do not expose to water or moisture. Place on stable surface.
Spare Parts & Repairability	Contact authorized Tannoy service center for genuine parts.
General Information	Designed for high-performance home theater and music systems.

Frequently Asked Questions - TS2.8 TANNOY

How do I connect the TS2.8 subwoofer to my receiver?

Use a mono RCA cable from the receiver's subwoofer output to the LFE input on the TS2.8. Alternatively, use speaker-level inputs if your receiver lacks a sub out.

What is the ideal placement for the TS2.8?

Place the subwoofer in a corner or along a wall for maximum bass reinforcement. Avoid placing it in the center of the room. Experiment with position to reduce standing waves.

How do I set the crossover frequency?

Set the crossover dial on the subwoofer to match your main speakers' lower limit (typically 80 Hz for THX). Use the LFE setting if connected via LFE input.

Why is there no sound from the subwoofer?

Check power, signal cable, and ensure the subwoofer is turned on. Verify the receiver's subwoofer output is enabled. Adjust volume and crossover settings.

Can I use the TS2.8 with a stereo system?

Yes, use the speaker-level inputs or a Y-adapter from the preamp outputs. Ensure the subwoofer's crossover is set to blend with your main speakers.

How do I clean the TS2.8 cabinet?

Wipe with a dry, soft cloth. For stubborn dirt, slightly dampen the cloth with water. Never use solvents or abrasive cleaners.

What is the warranty on the TS2.8?

Tannoy typically offers a 2-year warranty. Check your local retailer for specific terms. Register your product online for extended coverage.

Does the TS2.8 have auto-on/off feature?

Yes, the TS2.8 includes auto standby mode. It will power on when a signal is detected and enter low-power standby after no signal for approximately 20 minutes.

Can I daisy-chain multiple TS2.8 subwoofers?

Yes, use the line-level output on the subwoofer to connect to another subwoofer. Ensure the total impedance load matches your amplifier's capability.

What should I do if the subwoofer makes a humming noise?

Check for ground loops: ensure all components share the same power outlet. Use a ground loop isolator on the signal cable. Move the subwoofer away from power cords.

USER MANUAL TS2.8 TANNOY

Line drawing of a rectangular electronic device with mounting feet and a circular vent, no text or symbols present.

TS2.8 Sub

CONTENTS

IMPORTANT SAFETY INSTRUCTIONS 03

WARNINGS 03

FUSE PROTECTION 04

WARNING: STRONG MAGNETIC FIELD 04

EMC / EMI 04

ECODESIGN STANDBY POWER CONSUMPTION 04

WARRANTY 04

UNPACKING 05

POSITIONING YOUR SUBWOOFER 05

CONNECTING YOUR SUBWOOFER 05

VOLUME CONTROL 05

PHASE SWITCH 05

STANDBY SWITCH 05

CABINET CARE 05

TECHNICAL SPECIFICATIONS 06

REAR PANEL 07

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/ accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. Max. ambient temperature is 35 degree Celsius.
16. The use of apparatus in moderate climates.

The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

The below warning is located on the rear of the unit:

CAUTION

BEFORE OPENING PULL MAIN PLUG

ATTENTION

DEBRANCHER CORDON SECTEUR AVANT D'OUVRIR

WARNINGS

• Voltages in this equipment are hazardous to life. Do not open the unit – risk of electric shock inside. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
• Make sure that the “Voltage Select” switch on the rear panel is set correctly for your area before connecting the mains plug.
• Use only with the detachable power cord supplied with the apparatus, or by your local distributor or dealer.
• The MAINS plug is used as the disconnect device and shall remain readily operable.
• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.
• Do not install this device in a confined space.

FUSE PROTECTION

A mains fuse is provided on the back of this apparatus, which can only be removed with a screwdriver. This must be replaced by a fuse of the same type and rating (see specifications or refer to rear panel).

WARNING: STRONG MAGNETIC FIELD

Due to the powerful drive unit magnet, do not place within 1 metre (3 foot) of a cathode ray tube (CRT) television or monitor. There is no issue with plasma, LCD and LED devices.

EMC / EMI

This equipment has undergone safety and EMC testing, and complies with the European Low Voltage Directive Directive 2014/35/EU and Electromagnetic Compatibility Directives 89/336/EEC and 2014/30/EU.

Changes or modifications not expressly approved by Tannoy Ltd. for compliance could void the user's authority to operate the equipment.

ECODESIGN STANDBY POWER CONSUMPTION

This apparatus is designed to comply with EU Directive 2009/125/EC and Regulation 1275/2008. When in standby mode, power consumption is less than 0.5 W.

WARRANTY

No maintenance of the loudspeaker is necessary.

Please register your Tannoy product online at www.tannoy.com.

As part of the MUSIC Group, Tannoy is committed to providing the highest quality products, service and user experience for our customers. One element of this commitment is our after sales support which now incorporates our extended Limited Warranty. In the event of any concern that is not addressed by this extended Limited Warranty we would ask you to contact us at [e-mail]

For full warranty details including the extended Limited Warranty, please visit

http://www.music-group.com/warranty.aspx and register your purchase online at www.music-group.com or www.tannoy.com

UNPACKING

Check carefully for any sign of transit damage. In the unlikely event of transit damage, notify your shipping company and/or dealer as soon as possible for advice. It is recommended you store all packaging to allow protected transport in future. Ensure that the following is present:

- Mains cord appropriate to your country of use.

POSITIONING YOUR SUBWOOFER

This subwoofer is designed to augment the low frequency output of your main or satellite loudspeakers in the context of typically a 2.1 or 5.1 system setup. It should be positioned on the floor, ensuring air can circulate freely around the rear panel. As the subwoofer only produces low frequencies, positioning is not critical. Bass output will increase next to a wall or especially in a corner, so use the volume control to compensate when experimenting to find the most suitable position.

CONNECTING YOUR SUBWOOFER

Always make and check all connections before plugging your subwoofer into the mains. Make sure that the Voltage Select switch on the rear panel is set to the correct voltage range.

LINE LEVEL INPUTS:

You can feed a line level input signal to your subwoofer by using either the single LFE phono input socket, or stereo Left and Right phono sockets. Do not try to use both input options at once.

The LFE input is a mono feed from your AV receiver. Low pass filtering is done within the receiver, typically at 80 Hz, but may be adjustable, in which case some experimentation may be required to achieve the most seamless integration to the satellite speakers. With this input, the "Frequency" filter control on the subwoofer has no effect.

For stereo or 2.1 operation, the Left and Right input sockets should be used. Here, the frequency control should be used to match in with the main speakers, starting with the control at 12 o'clock, and adjusting the crossover control to obtain an even tonal balance.

VOLUME CONTROL

The rear mounted volume control knob allows for the subwoofer output level to match that of the satellite or main speakers. Due to variability in room acoustics and personal taste, some adjustment may be needed for best results. The purpose of a subwoofer is to enhance the low frequency or bass performance of the main speakers, but not to overpower. Any distortion from the subwoofer indicates it is being over-driven, in which case the volume control should be turned down accordingly.

PHASE SWITCH

This is intended to best compensate for the relative distance between the listener, subwoofer and front or stereo speakers, so the outputs do not cancel in the crossover region. Start with the switch in the 0^ position, then move to the 180^ position. The correct setting is the one that provides the strongest bass output.

STANDBY SWITCH

This may be set to either AUTO or ON mode. In AUTO, the subwoofer will activate from power saving standby mode in the presence of an input signal, and drop back into power saving mode shortly after a period of no activity. In ON mode, the subwoofer remains powered at all times. Power off the mains switch, if unused for a long period of time.

CABINET CARE

The cabinet may be cleaned with a soft lint free cloth. The use of solvents or abrasive cleaners should be avoided.

TECHNICAL SPECIFICATIONS

TS2.8 SUB

PERFORMANCE

Amplifier output power 180 W RMS

Low frequency roll off

34 Hz

(-6 dB, typical in room)

Crossover frequency 50 - 150 Hz variable, 2nd order

Drive unit 200 mm (8"), long throw side firing woofer

200 mm (8"), long throw auxiliary bass radiator (ABR)

Magnetic shielding No

Protection systems Over temperature, switch on/off transient, over current,

over-drive (clipping compressor)

Input connections Phono (RCA) LFE and stereo left & right

User controls Volume, crossover frequency, phase (0-180

, switchable),

mode (auto/always on), mains on/off

Power supply voltage 100 - 120 V / 220 - 240 V (switchable) 50-60 Hz

Rated Maximum power consumption 200 W

Mains fuse 100 - 120 VAC T6.3 AL 250V/ 220- 240 VAC T3.15AL 250 V

Cabinet construction & finish MDF with black fine texture vinyl

Cabinet dimensions (H x W x D)

320 x 324.2 x 270 mm (12.6 x 12.8 x 10.6")

(incl. feet)

Weight 8.6 kg (19 lbs)

Tannoy Limited - product designed in the United Kingdom.

Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications.

All specifications are subject to change without notice.

Copyright (c) 2015 Music Group Innovation SC Ltd. All rights reserved.